Search NASA⌕ Search

SEARCH · Search NASA

Results for “dissolution rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Coupled alkali-feldspar dissolution and secondary mineral precipitation in batch systems: 1. New experiments at 200° C and 300 bars

Batch reactor experiments were conducted to assess perthitic alkali-feldspar dissolution and secondary mineral formation in an initially acidic fluid (pH=3.1) at 200º C and 300 bars. Temporal evolution of fluid chemistry was monitored by major element analysis of in situ fluid samples. Solid reaction products were retrieved from two identical experiments terminated after 5 and 78 days. Scanning electron microscopy revealed dissolution features and significant secondary mineral coverage on feldspar surfaces. Boehmite and kaolinite were identified as secondary minerals by X-ray diffraction and transmission electron microscopy. X-ray photoelectron spectroscopy analysis of alkali-feldspar surfaces before and after reaction showed a trend of increasing Al/Si ratios and decreasing K/Al ratios with reaction progress, consistent with the formation of boehmite and kaolinite. Saturation indices of feldspars and secondary minerals suggest that albite dissolution occurred throughout the experiments, while K-fieldspar exceeded saturation after 216 h of reaction. Reactions proceeded slowly and full equilibrium was not achieved, the relatively high temperature of the experiments notwithstanding. Thus, time series observations indicate continuous supersaturation with respect to boehmite and kaolinite, although the extent of this decreased with reaction progress as the driving force for albite dissolution decreased. The first experimental evidence of metastable co-existence of boehmite, kaolinite and alkali feldspar in the feldspar hydrolysis system is consistent with theoretical models of mineral dissolution/precipitation kinetics where the ratio of the secondary mineral precipitation rate constant to the rate constant of feldspar dissolution is well below unity. This has important implications for modeling the time-dependent evolution of feldspar dissolution and secondary mineral formation in natural systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Corrosion Dynamics of Carbon Steel in Small, Stagnant Volume under Radiation

The long term disposal of used nuclear fuel involves a deep geological repository (DGR) with the key barrier being the Used Fuel Container (UFC) consisting of a copper-coated carbon steel vessel. NWMO's Mark II design UFC is assembled by welding the semi-spherical head to a cylindrical body. Crevice is formed between the two parts along with the weld region. The objective of this research is to develop and validate a reliable corrosion model for long-term corrosion of CS under DGR condition. Water radiolysis produces chemically reactive species that affect corrosion rates and pathways. This work explores the synergistic effects of γ-radiation and solution properties on the dynamics of carbon steel corrosion. In Stage 1, corrosion rate is controlled by dissolution of iron to the solution phase. In Stage 2, the controlling processes are the growth of iron hydroxide gel. In Stage 3, the main iron redox reaction is the conversion between different iron oxides, and the overall corrosion rate is negligible. The concentration of Fe{sup 2+} (aq) near the metal surface reaches its solubility limit very quickly in a small, stagnant volume. Diffusion from crevice to bulk solution is more significant with larger crevice size. Porous, granular form of magnetite loosely attached to the metal surface is formed from Fe{sup 3+} in solution via reduction by H{sub 2}O{sub 2}. As a source of continuous formation of H{sub 2}O{sub 2}, radiation accelerates oxidation (Fe0 → Fe{sup 2+} → Fe{sup 3+}). Once the oxidation is almost complete, H{sub 2}O{sub 2} can act as a reducing reagent, reducing Fe{sup 3+} species back to Fe{sup 2+} forming more stable mixed Fe{sup 2+,3+} species (magnetite and maghemite)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

In Situ Observation of the Precipitation, Aggregation, and Dissolution Behaviors of TiN Inclusion on the Surface of Liquid GCr15 Bearing Steel

In this study, the precipitation, aggregation, and dissolution behaviors of TiN inclusions on the surface of liquid GCr15 bearing steel have been investigated by combining the observations of confocal laser scanning microscope (CLSM) and field emission scanning electron microscope (FE-SEM) with those obtained from energy dispersive spectrometer (EDS) and theoretical analysis. The kinetic results show that the initial concentration of Ti and N are 0.0078 and 0.0049, respectively, the precipitation temperature is between 1640 K and 1680 K (1367 °C and 1407 °C), and the local cooling rate is between 0.5 and 10 K/s; TiN inclusion can precipitate only when the solid fraction is higher than 0.847 and its precipitation radius is between 1 and 6 μm. The precipitation radius of a TiN inclusion in the GCr15 bearing steel sheet can be reduced by decreasing the N content and increasing the cooling strength. The aggregation and densification of multi-particle aggregated TiN inclusions are verified by CLSM observation and theoretical analysis. The inclusions are aggregated by the cavity bridge force (CBF), and the aggregated TiN is formed by solid-phase sintering. The results of force analysis show that CBF plays a dominant role in the aggregation process of the inclusions. The atomic ratio of Ti and V obtained by EDS is 18:1, which may melt TiN and form the liquid inclusion at 1688 K (1415 °C) observed by CLSM. The theoretical analysis is conducted for the dissolution of the TiN inclusions observed by CLSM, which shows that the dissolution of the TiN inclusions is related to the size of the inclusions; the larger the size, the greater the dissolution rate. The long-strip TiN inclusion may be formed by the Ostwald ripening of two TiN inclusions. The TiN inclusions smaller than 3 μm in the GCr15 bearing steel may be formed by the dissolved Ti and N generated by the dissolution of TiN.

36 MATERIALS SCIENCE↗

Laboratory flow experiments for visualizing carbon dioxide-induced, density-driven brine convection

Injection of carbon dioxide (CO{sub 2}) into saline aquifers confined by low-permeability cap rock will result in a layer of CO{sub 2} overlying the brine. Dissolution of CO{sub 2} into the brine increases the brine density, resulting in an unstable situation in which more-dense brine overlies less-dense brine. This gravitational instability could give rise to density-driven convection of the fluid, which is a favorable process of practical interest for CO{sub 2} storage security because it accelerates the transfer of buoyant CO{sub 2} into the aqueous phase, where it is no longer subject to an upward buoyant drive. Laboratory flow visualization tests in transparent Hele-Shaw cells have been performed to elucidate the processes and rates of this CO{sub 2} solute-driven convection (CSC). Upon introduction of CO{sub 2} into the system, a layer of CO{sub 2}-laden brine forms at the CO{sub 2}-water interface. Subsequently, small convective fingers form, which coalesce, broaden, and penetrate into the test cell. Images and time-series data of finger lengths and wavelengths are presented. Observed CO{sub 2} uptake of the convection system indicates that the CO{sub 2} dissolution rate is approximately constant for each test and is far greater than expected for a diffusion-only scenario. Numerical simulations of our system show good agreement with the experiments for onset time of convection and advancement of convective fingers. There are differences as well, the most prominent being the absence of cell-scale convection in the numerical simulations. This cell-scale convection observed in the experiments is probably initiated by a small temperature gradient induced by the cell illumination.

54 ENVIRONMENTAL SCIENCES↗

Oxidative Dissolution of UO2 in a Simulated Groundwater Containing Synthetic Nanocrystalline Mackinawite

The long-term success of in situ reductive immobilization of uranium (U) depends on the stability of U(IV) precipitates (e.g., uraninite) under oxic conditions. Field and laboratory studies have implicated iron sulfide minerals as redox buffers or oxidant scavengers that may slow oxidation of reduced U(VI) solid phases by oxygen and Fe(III). Yet, the inhibition mechanism(s) and reaction rates of uraninite (UO2) oxidative dissolution by oxic species such as oxygen in FeS-bearing systems remain largely unresolved. To address this knowledge gap, abiotic batch experiments were conducted with synthetic UO2 in the presence and absence of synthetic mackinawite (FeS) under simulated groundwater conditions of pH = 7, PO2 = 0.02 atm, and PCO2 = 0.05 atm (equivalent to total dissolved carbonate of 0.01 M). The kinetic profiles of dissolved uranium indicate that FeS inhibited UO2 dissolution for 51 hr by effectively scavenging oxygen and keeping dissolved oxygen (DO) low. During this time period, oxidation of structural Fe(II) and S(-II) of FeS were found to control the DO levels, leading to the formation of iron oxyhydroxides and elemental sulfur, respectively, as verified by X-ray diffraction (XRD), Mössbauer and X-ray absorption spectroscopy (XAS). After FeS was depleted due to oxidation, DO levels increased and UO2 oxidative dissolution occurred at an initial rate of rm = 1.2 ± 0.4 ×10-8 mol•g-1•s-1, higher than rm = 5.4 ± 0.3 ×10-9 mol•g-1•s-1 in the control experiment where FeS was absent. Soluble U(VI) products were adsorbed by iron oxyhydroxides (i.e. nanogoethite and ferrihydrite) formed from FeS oxidation, which facilitated the detachment of U(VI) surface complexes and more rapid dissolution of UO2. XAS analysis confirmed the adsorption of U(VI) species, and also showed that U(VI) was not significantly incorporated into iron oxyhydroxide structure. This work reveals that both the oxygen scavenging by FeS and the adsorption of U(VI) to FeS oxidation products may be important in U reductive immobilization systems subject to redox cycling events.

Containing↗

Microstructural evolution and growth behavior of intermetallic compounds at the liquid Al/solid Fe interface by synchrotron X-ray radiography

Highlights: • A layered and tongue-like η phase was in-situ observed by synchrotron radiation X-ray radiography. • The coalescence of η phase bottom resulted in dissolution, further increasing the growth rate. • The θ phase growth behavior with different morphologies during cooling was analyzed. - Abstract: The growth of Inter-Metallic Compounds (IMCs) with dissolution was investigated on the liquid Al/solid Fe interconnection by using synchrotron radiation real-time imaging technology. At the initial stage of holding at 850 °C, a layer of the η-Fe{sub 2}Al{sub 5} phase formed at the interface, and tongue-like η grew into α-Fe. The tongue-like η phase had a stronger (001) texture than the layered phase. The coalescence of tongue-like η started at the bottom, followed by the dissolution of IMCs, which leads to a further increase in its growth rate. During solidification stage, the dotted, needle-like and flake θ-FeAl{sub 3} phases were sequentially formed.

36 MATERIALS SCIENCE↗

PEP Support: Laboratory Scale Leaching and Permeate Stability Tests

This report documents results from a variety of activities requested by the Hanford Tank Waste Treatment and Immobilization Plant (WTP). The activities related to caustic leaching, oxidative leaching, permeate precipitation behavior of waste as well as chromium (Cr) leaching are: • Model Input Boehmite Leaching Tests • Pretreatment Engineering Platform (PEP) Support Leaching Tests • PEP Parallel Leaching Tests • Precipitation Study Results • Cr Caustic and Oxidative Leaching Tests. Leaching test activities using the PEP simulant provided input to a boehmite dissolution model and determined the effect of temperature on mass loss during caustic leaching, the reaction rate constant for the boehmite dissolution, and the effect of aeration in enhancing the chromium dissolution during caustic leaching. Other tests were performed in parallel with the PEP tests to support the development of scaling factors for caustic and oxidative leaching. Another study determined if precipitate formed in the wash solution after the caustic leach in the PEP. Finally, the leaching characteristics of different chromium compounds under different conditions were examined to determine the best one to use in further testing.

54 ENVIRONMENTAL SCIENCES↗

Morphology selection in dealloying: A phase field study of the coupling among kinetic mechanisms

A phase field model is used to investigate how the corrosion rate and morphology of a dealloying metal is controlled by the kinetic rates of bulk solid diffusion, interfacial diffusivity, and interface dissolution. A specific focus is investigating the manner by which variations in these kinetic parameters synergistically influence the onset of a morphological instability at the solid-liquid interface, which is known to precede rapid dealloying corrosion towards highly topologically complex structures such as bicontinuous porous solids. This work demonstrates that this instability can be suppressed by either an increase of interdiffusion in the solid alloy, or by a decreasing rate of dissolution at the solid-liquid interface. When the instability is suppressed, the result is a relatively planar, passivated dealloying front. Importantly, however, coupled changes in kinetic parameters can also promote the morphological instability and sustain fine-scale ligament and pore formation. Finally, the relevance of the solid-liquid interfacial diffusion for determining the rate of dealloying and ligament formation is highlighted. By elucidating the mechanistic influence of bulk and interfacial kinetic factors on the dealloyed morphology, this work helps to rationalize the contrasting morphologies observed in various dealloying systems.

Diffusion↗

Oxidation and the Effects of High Temperature Exposures on Notched Fatigue Life of an Advanced Powder Metallurgy Disk Superalloy

Oxidation and the effects of high temperature exposures on notched fatigue life were considered for a powder metallurgy processed supersolvus heat-treated ME3 disk superalloy. The isothermal static oxidation response at 704 C, 760 C, and 815 C was consistent with other chromia forming nickel-based superalloys: a TiO2-Cr2O3 external oxide formed with a branched Al2O3 internal subscale that extended into a recrystallized - dissolution layer. These surface changes can potentially impact disk durability, making layer growth rates important. Growth of the external scales and dissolution layers followed a cubic rate law, while Al2O3 subscales followed a parabolic rate law. Cr- rich M23C6 carbides at the grain boundaries dissolved to help sustain Cr2O3 growth to depths about 12 times thicker than the scale. The effect of prior exposures was examined through notched low cycle fatigue tests performed to failure in air at 704 C. Prior exposures led to pronounced debits of up to 99 % in fatigue life, where fatigue life decreased inversely with exposure time. Exposures that produced roughly equivalent 1 m thick external scales at the various isotherms showed statistically equivalent fatigue lives, establishing that surface damage drives fatigue debit, not exposure temperature. Fractographic evaluation indicated the failure mode for the pre-exposed specimens involved surface crack initiations that shifted with exposure from predominately single intergranular initiations with transgranular propagation to multi-initiations from the cracked external oxide with intergranular propagation. Weakened grain boundaries at the surface resulting from the M23C6 carbide dissolution are partially responsible for the intergranular cracking. Removing the scale and subscale while leaving a layer where M23C6 carbides were dissolved did not lead to a significant fatigue life improvement, however, also removing the M23C6 carbide dissolution layer led to nearly full recovery of life, with a transgranular initiation typical to that observed in unexposed specimens.

Sudbrack, Chantal K.↗

A review of geochemical–mechanical impacts in geological carbon storage reservoirs

Geological carbon storage (GCS) refers to the technology of capturing man-made carbon dioxide (CO 2 ) emissions, typically from stationary power sources, and storing such emissions in deep underground reservoirs. GCS is an approach being explored globally as a defense mechanism against climate change projections, although it is not without its critics. An important focus has been recently placed on understanding the coupling between rock–fluid geochemical alterations and mechanical changes for CO 2 storage schemes in saline aquifers. This article presents a review of the current state of knowledge regarding CO 2 -induced geochemical reactions in subsurface reservoirs, and their potential impact on mechanical properties and microseismic events at CO 2 storage sites. Therefore, this review focuses, in particular, on the current state of the art in fluid–rock interactions within the GCS context. Key issues to be addressed include geochemical reactions and the alteration of transport and mechanical properties. Specific review topics include the swelling of clays, the prediction of dissolution and precipitation reaction rates, CO 2 -induced changes in porosity and permeability, constitutive models of chemo–mechanical interactions in rock, and correlations between geochemical reactions and induced seismicity. The open questions in the field are emphasized, and new research needs are highlighted.

58 GEOSCIENCES↗

Mesoscopic modeling of transport resistances in a polymer-electrolyte fuel-cell catalyst layer: Analysis of hydrogen limiting currents

Understanding transport resistances in a polymer-electrolyte fuel cell (PEFC) catalyst layer (CL) is essential to mitigate the unexpected voltage loss when using low loadings of precious metals. In this paper, we explore through mesoscopic modeling the quantification analyses of the transport resistances in CL as derived using hydrogen-pump limiting current. Numerical treatments on the conjugated interfacial conditions at interfaces of ionomer/pore and Pt/ionomer are proposed to describe the mesoscopic transport processes of hydrogen and proton. Characterizations of the reconstructed microstructure of CL are performed. Parameter analyses on the influences of the critical transport properties such as the permeation coefficient and the dissolution and adsorption reaction rates at the surfaces of ionomer/pore and Pt/ionomer on the local transport resistance are presented. It is found that the local transport resistance is mainly originated from the diffusion resistance of the ionomer thin-film, which is more resistive than its bulk analogue with its permeation coefficient fitted to be 5.9% of the bulk one. The interfacial transport resistances and the diffusion resistance are coupled. The local transport resistance increases with I/C ratio due to thicker ionomer coated on the particles. Higher Pt/C ratio and bare carbon fraction lead to higher local transport resistance since the ionomer loading relative to Pt roughness factor decreases. The local transport resistance decreases with the porosity. Furthermore, the contribution of pores to the CL resistance, which decreases with the porosity, is comparatively small at low loadings.

25 ENERGY STORAGE↗

Performance of the Fluidized Bed Steam Reforming Product Under Hydraulically Unsaturated Conditions

Currently, several candidates for secondary waste immobilization at the Hanford site in the State of Washington, USA are being considered. To demonstrate the durability of the product in the unsaturated Integrated Disposal Facility (IDF) at the site, a series of tests have been performed one of the candidate materials using the Pressurized Unsaturated Flow (PUF) system. The material that was tested was the Fluidized Bed Steam Reformer (FBSR) granular product and the granular product encapsulated in a geopolymer matrix. The FBSR product is composed primarily of an insoluble sodium aluminosilicate matrix with the dominant phases being feldspathoid minerals mostly nepheline, sodalite, and nosean. The PUF test method allows for the accelerated weathering of materials, including radioactive waste forms, under hydraulically unsaturated conditions, thus mimicking the open-flow and transport properties that most likely will be present at the IDF. The experiments show a trend of decreasing tracer release as a function of time for several of the elements released from the material including Na, Si, Al, and Cs. However, some of the elements, notably I and Re, show a steady release throughout the yearlong test. This result suggests that the release of these minerals from the sodalite cage occurs at a different rate compared with the dissolution of the predominant nepheline phase.

Durability testing↗

Electrochemical Behavior of Cerium at an Indium Tin-Doped Oxide Electrode in Acidic Media

The redox behavior and speciation of cerium at mesoporous thin films composed of nanoparticles of indium tin-doped oxide (nITO) electrodes were characterized in pH 4.8, 0.1 M acetate buffer and both 0.1 and 1 M HNO 3 using electrochemical techniques and X-ray photoelectron spectroscopy. Anodic deposition of ceria species from Ce(III) to the nITO electrode was achieved under all solvent conditions via spontaneous condensation of electrochemically generated ceric hydroxide species. In 1 M nitric acid, the rate of CeO 2 dissolution is on the same order as CeO 2 deposition, resulting in negligible amounts of CeO 2 electrodeposited at the nITO surface. The cathodic stripping of CeO 2 from the nITO substrate deposited in 0.1 M nitric acid or pH 4.8 acetate buffer follows a 2-step process where Ce(IV)-oxide is initially reduced to an unstable Ce(III)-oxide species that rapidly undergoes acid catalyzed dissolution to yield soluble Ce(III) (aq) . These findings provide a foundation for the pH and anodic potential controlled deposition of CeO 2 thin films to ITO substrates, which can aid in the development of materials composed of ceria. As a result, they can also be used to infer likely analogous actinide redox behavior and speciation at these electrodes.

Cerium↗

Broader Impacts and Outreach Videos on Ocean Physics and Biogeochemistry

This is just a preliminary NF1676 in advance of filming for a project....A convergent team of experts in biology, chemistry, physics, engineering, mathematics, and computational modeling examine how dynamic and coupled phytoplankton-pathogen-particle-predator linkages coalesce to explain the observed high spatial variability in the efficiency of the export of particulate organic carbon (POC) to the deep ocean. They elucidate and quantify the linkages between viruses and ballast minerals to increase understanding of carbon cycling in the oceanic biological carbon pump and the impact of viruses within it. By providing knowledge than can be used to improve the parameterization of carbon export in Earth system models, the project will help reduce uncertainty in regional marine biogeochemical projections, potentially improving marine ecosystem and fisheries management on timescales from seasons to decades. The project includes activities that provide teaching resources and hands-on training to educators within a ‘Tools of Science’ program that provides a simple and succinct way to communicate the process of scientific research to students in a way that is useful to teachers. The project couples laboratory-based experiments on model host-virus-grazer systems with extensive field based observational and manipulative studies on natural populations of diatoms and coccolithophores, the two phytoplankton groups that account for most of the estimated particulate organic matter flux to the deep ocean. Experiments and measurements integrate diagnostic biological and chemical controls on infection and particle coagulation theory with microscale physics and grazing to quantify links to each hypothesized export mechanism under field-relevant turbulent conditions. Cutting-edge engineering and analytical tools are used to diagnose and track infection dynamics while characterizing and quantifying particle aggregation and disaggregation, mineral dissolution, sinking dynamics, grazing rates, and fecal pellet production at unprecedented resolution and under well-defined, microscale physical regimes. Field campaigns elucidate the relative efficiency of hypothesized mechanisms in stimulating POC export in natural blooms, while providing bulk and size-resolved estimates of POC flux.

Daniel B Whitt↗

Developing Soret Transport Coefficients for Lanthanides from Experimental Results

Understanding the nature of lanthanide transport in metallic fuels and its relation to fuel clad chemical interaction (FCCI) has been has been a topic that is long on interest and short on data. Recent experiments have shown a strong temperature-gradient based diffusion (Soret diffusion) and have thus provided vitally important information for modelers. However, details about the actual coefficients and many of the relevant processes that crucially participate in the cerium migration and precipitation process have not yet been disclosed. Using a combination of computing tools (primarily python and BISON) we are exploring methods that may extract useful information from visual data. In this specific example, we are using what is formally called 'blob detection' algorithms to analyzed the precipitate distribution of cerium in a U-Zr metal that has had a fixed temperature gradient enforced upon it for a specified period of time. These algorithms, once properly adapted to the problem at hand, may be useful at extracting information from radial and axial scans of metallic fuels which are much more abundant than direct measurements of lanthanides. We have developed a model that qualitatively works to move mass along a temperature gradient and precipitate heavily in the cold regions. Additionally, we have observed that the solubility of cerium in U-Zr held under this kind of temperature gradient is subject to some amount of U-Zr constituent redistribution. Our results predict movement of the Zr toward the hot end of the rod followed by a U-rich layer with the cooler 3/5 of the rod staying close the the initial U-Zr distribution. A more complete analysis will define groups of correlated parameters that correctly simulate the resulting distribution of precipitates. This restricted parameters space will give smaller bounds to modelers and will expedite the analysis of future works as new and more accurate data are made available. A follow-up experiment that started with 1/10 of the initial concentration of cerium may provide valuable additional information with regard to the effect of the rates of precipitation and dissolution as well as demonstrating the potential rapidity of migration in a lower burnup scenario. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Presence and Impact of Surface Films formed on Mg in Chloroaluminate Electrolytes.

The impact of surface film formation on Mg is explored during electrodeposition and electrodissolution in two high activity, aprotic electrolytes: the all phenyl complex (APC) and the magnesium aluminum chloride complex (MACC). Where past studies have argued such films are benign, results show that interfacial films are responsible for controlling the Mg deposit structure when deposition and dissolution are conducted at the rates required for practical Mg batteries. Chronopotentiometry is shown to provide clear signatures of the impact of interfacial films on deposition and dissolution. The particular combination of cycling punctuated by periods of open circuit equilibration is shown to yield a noticeable decrease in coulombic efficiency over a 50 cycle sequence. High resolution electron imaging shows that cycling results in porosity development and accumulation of electrolyte constituents within the deposit. Reduced coulombic efficiency signaling Mg loss appears related to progressive isolation of a fraction of the deposit. Mg and electrolyte loss must be compensated for in a practical cell through the introduction of excess inventory and resulting in a reduced energy density of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiolysis and Radiation-Driven Dynamics of Boehmite Dissolution Observed by In Situ Liquid-Phase TEM

We report over the last several decades, there have been several studies examining the radiation stability of boehmite and other aluminum oxyhydroxides, yet less is known about the impact of radiation on boehmite dissolution. Here, we investigate radiation effects on the dissolution behavior of boehmite by employing liquid-phase transmission electron microscopy (LPTEM) and varying the electron flux on the samples consisting of either single nanoplatelets or aggregated stacks. We show that boehmite nanoplatelets projected along the [010] direction exhibit uniform dissolution with a strong dependence on the electron dose rate. For nanoplatelets that have undergone oriented aggregation, we show that the dissolution occurs preferentially at the particles at the ends of the stacks that are more accessible to bulk solution than at the others inside the aggregate. In addition, at higher dose rates, electrostatic repulsion and knock-on damage from the electron beam causes delamination of the stacks and dissolution at the interfaces between particles in the aggregate, indicating that there is a threshold dose rate for electron-beam enhancement of dissolution of boehmite aggregates.

54 ENVIRONMENTAL SCIENCES↗