Search NASA⌕ Search

SEARCH · Search NASA

Results for “distributed inference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Distribution and size of elements of Saturn's rings as inferred from 12-cm radar observations

A 64m radar antenna was used to observe Saturn's rings at 12.6 cm wavelength, with reduced Doppler spread. The results show a positive radar return corresponding to about a 60 percent return from an isotropic scatterer with the projected area of the rings, allowing for the Cassini division. A radar spectrogram of the rings is shown with power density plotted against Doppler frequency shift.

Morris, G. A., Jr.↗

Multivariate normality

Sets of experimentally determined or routinely observed data provide information about the past, present and, hopefully, future sets of similarly produced data. An infinite set of statistical models exists which may be used to describe the data sets. The normal distribution is one model. If it serves at all, it serves well. If a data set, or a transformation of the set, representative of a larger population can be described by the normal distribution, then valid statistical inferences can be drawn. There are several tests which may be applied to a data set to determine whether the univariate normal model adequately describes the set. The chi-square test based on Pearson's work in the late nineteenth and early twentieth centuries is often used. Like all tests, it has some weaknesses which are discussed in elementary texts. Extension of the chi-square test to the multivariate normal model is provided. Tables and graphs permit easier application of the test in the higher dimensions. Several examples, using recorded data, illustrate the procedures. Tests of maximum absolute differences, mean sum of squares of residuals, runs and changes of sign are included in these tests. Dimensions one through five with selected sample sizes 11 to 101 are used to illustrate the statistical tests developed.

Crutcher, H. L.↗

A turbulent origin for the rotation of molecular clouds

The observed rotational properties of dark clouds are shown to be consistent with the turbulent character of the interstellar medium. The turbulent flow is easily maintained by the shearing action of differential galactic rotation. The size distribution of molecular clouds inferred from observations is found to closely resemble a Kolmogorov turbulent spectrum. These findings suggest that the processes leading to the formation and evolution of such clouds may depend strongly on the properties and characteristics of interstellar turbulence.

Fleck, R. C., Jr.↗

Propagation and nucleosynthesis of ultraheavy cosmic rays

The observed fluxes of cosmic ray (C.R.) ultraheavy elements depend on their charge and mass spectrum at the sources and on the propagation effects, on the distribution of path lengths traversed by the particles on their way from the sources to the observation point. The effect of different path length distributions (p.l.d.) on the infered source abunances is analyzed. It seems that it is rather difficult to fit a reasonable p.l.d. so that the obtained source spectrum coincides with the Solar System (SS) abundances in more detail. It suggests that the nucleosynthesis conditions for c.r. nuclei may differ from that for SS matter. The nucleosynthesis of ultraheavy elements fitting its parameters to get the c.r. source abundances is calculated. It is shown that it is possible to get a very good agreement between the predicted and the observed source abundance.

Giler, M.↗

On the relationship between scatterometer-derived convergences and atmospheric moisture

Fields of divergence calculated from the Seasat-A Satellite Scatterometer winds and fields of integrated water vapor and rainrate from the Scanning Multichannel Microwave Radiometer on Seasat are constructed for three different midlatitude cyclones. These storms include an explosively deepening cyclone that occurred in the North Atlantic (also known as the Queen Elizabeth II cyclone), a storm that occurred in the North Pacific, and a Southern Ocean storm. In all three cases, the regions of convergence and atmospheric water (vapor and rain) are consistent with each other and help to define features of each storm. The vertical distribution of moisture is inferred for one case using both the convergence pattern and the integrated water vapor field. In another, interpretation of the convergence field in a data gap region is aided by the water vapor field. In all three cases, surface low pressure centers, fronts, and even frontal waves are clearly evident as areas of convergence, and increased water vapor and rainrate.

Mcmurdie, Lynn A.↗

Aspects of interplanetary plasma turbulence

Data acquired in the free solar wind by the ISEE 1 and ISEE 2 propagation experiment were used to obtain the power spectra of fluctuations in electron density; a maximum-entropy technique has made it possible to exploit fully the intrinsic precision of the in situ measurements. The results have led to a new determination of the anisotropy of density fluctuations in the solar wind, which is in conflict with certain expectations based on the propagation of Langmuir waves, but is in agreement with multistation interplanetary-scintillation measurements: it could well be that Langmuir wave growth rates during type III solar bursts are much larger than has been inferred from the electron distribution function, whose measurement involves averaging over relatively long time intervals. The relation between the fluctuation level and the mean density is studied, and tentative evidence for a correlation between the relative fluctuation level and proton temperature is presented.

Celnikier, L. M.↗

Laboratory measurements of the 7.5-9.38-mm absorption of gaseous ammonia (NH3) under simulated Jovian conditions

An attempt is made to infer the abundance and distribution of ammonia from RF emission measurements more accurately than heretofore, on the basis of the results of laboratory measurements for the mm-wave opacity of gaseous ammonia under simulated Jovian atmosphere conditions. The measurements were conducted at various frequencies in the 32-40 GHz range at 2 atm and 203 K; the atmospheric mixture was 88.34 percent H2, 9.81 percent He, and 1.85 percent NH3. Experimental results are found to be readily modeled by the Gross (1955) line-shape factor, rather than that of Van Vleck and Weisskopf (1945).

Joiner, Joanna↗

A CO and far-infrared study of the S254-S258 region

The molecular cloud associated with compact radio and bright optical H II regions is studied from observations of (C-12)O, (C-13)O, HCN J = 1-0 emission. The far-infrared and millimeter molecular line emission from the S254-S258 molecular cloud is analyzed, using co-added survey data from IRAS, to investigate the coupling between the dust and gas components and the internal energetics associated with molecular clouds. The dust component is analyzed by fitting model intensities, derived from a dust mass column density temperature relation, to the observed far-infrared emission. Such modeling is shown to provide a more complete description of the cold dust component which comprises most of the dust mass than can be determined from the standard single temperature analysis. Local heating of the dust component by newborn massive stars associated with the H II regions of the cloud is inferred from the spatial distribution of temperatures of grains which make the largest contributions to the observed 60 and 100 micron emission.

Heyer, Mark H.↗

Observations of VHF emissions from 50-mA electron beam injections in the ionosphere that are associated with beam-induced discharges

Results are presented of observations of strong VHF plasma waves with amplitudes in excess of 0.1 mV/m (Hz)1/2 associated with 50 mA electron beam injections in the ionosphere. Data from three swept-frequency receivers carried on two daughter payloads are analyzed to determine the emission spectra of the electron beam for various energies and currents. These results were obtained from the rocket-borne experiment SCEX 3, NASA flight 39.002 UE, launched February 1, 1990. The accelerator payload also carried photometers, which measured luminosity at wavelengths of 391.4 and 380.5 nm. Several times during electron gun activity the measured luminosity increased much faster than proportional to the beam current. This nonlinear increase is evidence that a discharge is occurring in the vicinity of the accelerator payload. It is inferred from the uniform distribution of the luminosity around the accelerator payload that the observed discharge extends significantly outside the beam cylinder.

Goerke, R. T.↗

Backscattering by nonspherical hydrometeors as calculated by the coupled-dipole method - An application in radar meteorology

The severest test of a theory of scattering by particles is how well it calculates scattering in the backward direction. The coupled-dipole method can be used for accurately calculating backscattering at 94 GHz by hexagonal ice crystals. Backscattering by columns is markedly different from that by plates, which indicates that it might be possible to infer size and shape distributions of ice crystals using recently developed millimeter wave radar.

Dungey, Clifton E.↗

Properties and decay of stratospheric aerosols in the Arctic following the 1991 eruptions of Mount Pinatubo

Sunphotometer observations made from an aircraft several months after the June 1991 eruptions of Mount Pinatubo are used to quantify the spectral opacity of the Arctic stratosphere. Ancillary surface-based measurements are presented in support of the aircraft data that show large increases in stratospheric optical depth attributed to the presence of volcanic aerosols. Visible optical depths greater than 0.2 were observed during flight segments flown above the tropopause. An inversion algorithm and the optical depth data are used to infer effective aerosol size distributions. The distributions tend to be bimodal, having a large-partical mode radius of about 0.50 micron and a small-particle mode of higher concentration with radii less than 0.18 micron. Surface measurements made during spring 1992 and 1993 are also used to estimate a time constant (e-folding time) of about 13.5 months assuming that the Arctic stratosphere's opacity decays exponentially; this estimate is larger than decay times observed following other major volcanic eruptions. Our results suggest that any climate perturbations in the Arctic caused by eruptions of Pinatubo may be significant and will very likely persist longer than any volcanically-induced changes observed there during the past century.

Stone, Robert S.↗

Goddard Cumulus Ensemble (GCE) Model: Application for Understanding Preciptation Processes

The global hydrological cycle is central to climate system interactions and the key to understanding their behavior. Rainfall and its associated precipitation processes are a key link in the hydrologic cycle. Fresh water provided by tropical rainfall and its variability can exert a large impact upon the structure of the upper ocean layer. In addition, approximately two-thirds of the global rain falls in the Tropics, while the associated latent heat release accounts for about three-fourths of the total heat energy for the Earth's atmosphere. Precipitation from convective cloud systems comprises a large portion of tropical heating and rainfall. Furthermore, the vertical distribution of convective latent-heat releases modulates large-scale tropical circulations (e.g., the 30-60-day intraseasonal oscillation), which, in turn, impacts midlatitude weather through teleconnection patterns such as those associated with El Nino. Shifts in these global circulations can result in prolonged periods of droughts and floods, thereby exerting a tremendous impact upon the biosphere and human habitation. And yet, monthly rainfall over the tropical oceans is still not known within a factor of two over large (5 degrees latitude by 5 degrees longitude) areas. Hence, the Tropical Rainfall Measuring Mission (TRMM), a joint U.S./Japan space project, can provide a more accurate measurement of rainfall as well as estimate the four-dimensional structure of diabatic heating over the global tropics. The distributions of rainfall and inferred heating can be used to advance our understanding of the global energy and water cycle. In addition, this information can be used for global circulation and climate models for testing and improving their parameterizations.

Tao, Wei-Kuo↗

Heating Structures Derived from Satellite

Rainfall is a key link in the hydrologic cycle and is a primary heat source for the atmosphere. The vertical distribution of latent-heat release, which is accompanied by rainfall, modulates the large-scale circulations of the tropics and in turn can impact midlatitude weather. This latent heat release is a consequence of phase changes between vapor, liquid, and solid water. The Tropical Rainfall Measuring Mission (TRMM), a joint U.S./Japan space project, was launched in November 1997. It provides an accurate measurement of rainfall over the global tropics which can be used to estimate the four-dimensional structure of latent heating over the global tropics. The distributions of rainfall and inferred heating can be used to advance our understanding of the global energy and water cycle. This paper describes several different algorithms for estimating latent heating using TRMM observations. The strengths and weaknesses of each algorithm as well as the heating products are also discussed. The validation of heating products will be exhibited. Finally, the application of this heating information to global circulation and climate models is presented.

Tao, W.-K.↗

Lunar and Planetary Science XXXV: Chondrules: The Never-Ending Story

The session "Chondrules: The Never-Ending Story" included the following reports:Dust Size Distribution in Solar Nebula Inferred from Shock-Wave Heating Model for Chondrule Formation; Collisional Destruction of Chondrules in Shock Waves and Inferred Dust to Gas Mass Ratio; Evaporation and Accompanying Isotopic Fractionation of Sulfur from Fe-S Melt During Shock Wave Heating ; Evaporation During Chondrule Formation, Recondensation as Fine Particles, and the Condensation of S and Other Volatile Elements; Fe Isotopes and the Formation of Chondrules; Pristine and Processed Metal in CR Chondrites: Condensation in the Solar Nebula and Partial Reequilibration During Chondrule Formation; Variation of the Condensation Path of Supercooled Silicate Melt; Volatile and Moderately Volatile Trace Element Composition of Chondrules and Matrix from CM Chondrites: Implications for Chondrule Formation; Opaque Mineral Assemblages at Chondrule Boundaries in the Vigarano CV Chondrite: Evidence for Gas-Solid Reactions Following Chondrule Formation; Forsterite and Olivine in Sahara-97210 (LL3.2) and Chainpur (LL3.4) Chondrules: Compositional Evolution and the Influence of Melting; The Vaguries of Pyroxene Nucleation and the Resulting Chondrule Textures; Contemporaneous Formation of Chondrules in the Al-26-Mg-26 System for Ordinary and CO Chondrites; and Al-Mg Isotopic Systematics in Ferromagnesian Chondrules from the Unequilibrated Ordinary Chondrite.

Source record↗

Shuttle Return To Flight Experimental Results: Protuberance Effects on Boundary Layer Transition

The effect of isolated roughness elements on the windward boundary layer of the Shuttle Orbiter has been experimentally examined in the Langley Aerothermodynamic Laboratory in support of an agency-wide effort to prepare the Shuttle Orbiter for return to flight. This experimental effort was initiated to provide a roughness effects database for developing transition criteria to support on-orbit decisions to repair damage to the thermal protection system. Boundary layer transition results were obtained using trips of varying heights and locations along the centerline and attachment lines of 0.0075-scale models. Global heat transfer images using phosphor thermography of the Orbiter windward surface and the corresponding heating distributions were used to infer the state of the boundary layer (laminar, transitional, or turbulent). The database contained within this report will be used to formulate protuberance-induced transition correlations using predicted boundary layer edge parameters.

Liechty, Derek S.↗

Aerothermodynamic Testing and Boundary Layer Trip Sizing of the HIFiRE Flight 1 Vehicle

An experimental wind tunnel test was conducted in the NASA Langley Research Center s 20-Inch Mach 6 Air Tunnel in support of the Hypersonic International Flight Research Experimentation Program. The information in this report is focused on the Flight 1 configuration, the first in a series of flight experiments. This report documents experimental measurements made over a range of Reynolds numbers and angles of attack on several scaled ceramic heat transfer models of the Flight 1 payload. Global heat transfer was measured using phosphor thermography and the resulting images and heat transfer distributions were used to infer the state of the boundary layer on the vehicle windside and leeside surfaces. Boundary layer trips were used to force the boundary layer turbulent, and a brief study was conducted to determine the effectiveness of the trips with various heights. The experimental data highlighted in this test report were used to size and place the boundary layer trip for the flight test vehicle.

Berger, Karen T.↗

Effect of Protuberance Shape and Orientation on Space Shuttle Orbiter Boundary-Layer Transition

This document describes an experimental study conducted to examine the effects of protuberances on hypersonic boundary-layer transition. The experiment was conducted in the Langley 20-Inch Mach 6 Tunnel on a series of 0.9%-scale Shuttle Orbiter models. The data were acquired to complement the existing ground-based boundary-layer transition database that was used to develop Version 1.0 of the boundary-layer transition RTF (return-to-flight) tool. The existing ground-based data were all acquired on 0.75%-scale Orbiter models using diamond-shaped ( pizza-box ) trips. The larger model scale facilitated in manufacturing higher fidelity protuberances. The end use of this experimental database will be to develop a technical basis (in the form of a boundary-layer transition correlation) to assess representative protrusion shapes, e.g., gap fillers and protrusions resulting from possible tile repair concepts. The primary objective of this study is to investigate the effects of protuberance-trip location and geometry on Shuttle Orbiter boundary-layer transition. Secondary goals are to assess the effects of gap-filler orientation and other protrusion shapes on boundary-layer transition. Global heat-transfer images using phosphor thermography of the Orbiter windward surface and the corresponding streamwise and spanwise heating distributions were used to infer the state of the boundary layer, i.e., laminar, transitional, or turbulent.

King, RUdolph A.↗

Aerothermodynamic Testing and Boundary Layer Trip Sizing of the HIFiRE Flight 1 Vehicle

An experimental wind tunnel test was conducted in the NASA Langley Research Center s 20-Inch Mach 6 Air Tunnel in support of the Hypersonic International Flight Research Experimentation Program. The information in this article is focused on the Flight 1 configuration, the first in a series of flight experiments. The article documents experimental measurements made over a Reynolds numbers range of 2.1x10(exp 6)/ft to 5.6x10(exp 6)/ft and angles of attack of -5 to +5 deg on several scaled ceramic heat transfer models of the Flight 1 configuration. Global heat transfer was measured using phosphor thermography and the resulting images and heat transfer distributions were used to infer the state of the boundary layer on the vehicle windside and leeside surfaces. Boundary layer trips were used to force the boundary layer turbulent and the experimental data highlighted in this article were used to size and place the boundary layer trip for the flight vehicle. The required height of the flight boundary layer trip was determined to be 0.079 in and the trip was moved from the design location of 7.87 in to 20.47 in to ensure that augmented heating would not impact the laminar side of the vehicle. Allowable roughness was selected to be 3.2x10(exp -3) in.

Berger, Karen T.↗