Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamics reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

CFD Analysis in Advance of the NASA Juncture Flow Experiment

NASA through its Transformational Tools and Technologies Project (TTT) under the Advanced Air Vehicle Program, is supporting a substantial effort to further investigate the formation and origin of separation bubbles found on wing-body juncture zones. The flow behavior in these regions is highly complex, difficult to measure experimentally, and challenging to model numerically. Multiple wing configurations were designed and evaluated using Computational Fluid Dynamics (CFD), and a series of wind tunnel risk reduction tests were performed to further down-select the candidates for the final experiment. This paper documents the CFD analysis done in conjunction with the 6 percent scale risk reduction experiment performed in NASA Langley’s 14- by 22-Foot Subsonic Tunnel. The combined CFD and wind tunnel results ultimately help the Juncture Flow committee select the wing configurations for the final experiment.

Lee, H. C.↗
DOE OSTI2020

High-Fidelity Large-Signal Order Reduction Approach for Composite Load Model

With the increasing penetration of electronic loads and distributed energy resources, conventional load models cannot capture their dynamics. Therefore, a new comprehensive composite load model is developed by Western Electricity Coordinating Council (WECC). However, this model is a complex high-order non-linear system with multi-time-scale property, which poses challenges on power system studies with heavy computational burden. In order to reduce the model complexity, the authors firstly develop a large-signal order reduction (LSOR) method using singular perturbation theory. In this method, the fast dynamics are integrated into the slow ones to preserve transient characteristics of the former. Then, accuracy assessment conditions are proposed and embedded into the LSOR to improve and guarantee the accuracy of reduced-order model. Finally, the reduced-order WECC composite load model is derived by using the proposed algorithm. Overall, simulation results show that the reduced-order large-signal model significantly alleviates the computational burden while maintaining similar dynamic responses as the original composite load model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1981

Pursuit tracking and higher levels of skill development in the human pilot

A model of the human pilot is offered for pursuit tracking tasks; the model encompasses an existing model for compensatory tracking. The central hypothesis in the development of this model states that those primary structural elements in the compensatory model responsible for the pilot's equalization capabilities remain intact in the pursuit model. In this latter case, effective low-frequency inversion of the controlled-element dynamics occurs by feeding-forward derived input rate through the equalization dynamics, with low-frequency phase droop minimized. The sharp reduction in low-frequency phase lag beyond that associated with the disappearance of phase droop is seen to accompany relatively low-gain feedback of vehicle output. The results of some recent motion cue research are discussed and interpreted in terms of the compensatory-pursuit display dichotomy. Tracking with input preview is discussed in a qualitative way. In terms of the model, preview is shown to demand no fundamental changes in structure or equalization and to allow the pilot to eliminate the effective time delays that accrue in the inversion of the controlled-element dynamics. Precognitive behavior is discussed, and a model that encompasses all the levels of skill development outlined in the successive organizations of perception theory is finally proposed.

Hess, R. A.↗
DOE OSTI2025

Temporally-consistent koopman autoencoders for forecasting dynamical systems

Absence of sufficiently high-quality data often poses a key challenge in data-driven modeling of high-dimensional spatio-temporal dynamical systems. Koopman Autoencoders (KAEs) harness the expressivity of deep neural networks (DNNs), the dimension reduction capabilities of autoencoders, and the spectral properties of the Koopman operator to learn a reduced-order feature space with simpler, linear dynamics. However, the effectiveness of KAEs is hindered by limited and noisy training datasets, leading to poor generalizability. To address this, we introduce the Temporally-Consistent Koopman Autoencoder (tcKAE), designed to generate accurate long-term predictions even with limited and noisy training data. This is achieved through a consistency regularization term that enforces prediction coherence across different time steps, thus enhancing the robustness and generalizability of tcKAE over existing models. We provide analytical justification for this approach based on Koopman spectral theory and empirically demonstrate tcKAE’s superior performance over state-of-the-art KAE models across a variety of test cases, including simple pendulum oscillations, kinetic plasma, and fluid flow data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2019

Influence of Strain-Gage Balance Characteristics on the Precision Error of the Drag Coefficient

Improvements and results of a new method are presented that computes a pre-test estimate of the precision error of the drag coefficient of a wind tunnel model. The error estimate is defined as the part of the drag coefficient's precision error that is primarily associated with the precision error of the angle of attack measurement and physical characteristics of the chosen strain-gage balance. The method indirectly describes the precision error of the angle of attack measurement by using an assumed balance gage output variation of one microV/V. The physical characteristics of the balance, on the other hand, are described by partial derivatives of the axial and normal forces with respect to the strain-gage outputs. These derivatives can directly be obtained from the data reduction matrix of the balance. The precision error estimate itself is calculated by applying a simple explicit equation that uses the model reference area, the dynamic pressure, the angle of attack, the coefficients of the linear terms of the data reduction matrix, and the electrical output variation of one microvolt per volt as input. Precision errors at constant angle of attack may be visualized as contour plots by plotting them, for example, versus the Mach number and the total pressure. Characteristics of NASA's MC60E balance are used in combination with the reference area of a generic wind tunnel model in order to demonstrate that error estimates are independent of both the balance load format and the units chosen for the description of balance loads, model reference area, and the dynamic pressure. Finally, experimental data from a wind tunnel test of the Ames Check Standard Model in the NASA Ames 11-foot Transonic Wind Tunnel illustrates the application of the method to real-world test data.

precision error↗
NASA NTRS2001

Fluid Dynamics of a Pressure Reducing Inlet

Instruments for the monitoring of hazardous gases in and near the space shuttle collect sample gas at pressures on the order of one atmosphere and analyze their properties in an ultra-high vacuum by means of a quadrupole-mass-spectrometer partial pressure transducer. Sampling systems for such devices normally produce the required pressure reduction through combinations of vacuum pumps, fluid Tees and flow restrictors (e.g. orifices, sintered metal frits or capillaries). The present work presents an analytical model of the fluid dynamics of such a pressure reduction system which enables the calculation of the pressure in the receiver vessal in terms of system parameters known from the specifications for a given system (e.g. rated pumping speeds of the pumping hardware and the diameters of two orifices situated in two branches of a fluid Tee). The resulting formulas will expedite the fine tuning of instruments now under development and the design of later generations of such devices.

Russell, John M.↗
DOE OSTI2022

Scout Benchmark Scenarios for U.S. Building Energy and CO2 Emissions to 2050

Overview and Intended Use Cases: These scenarios establish a range of futures for U.S. buildings sector energy use and CO2 emissions to 2050 using Scout (scout.energy.gov), a reproducible and granular model of U.S. building energy use, emissions, and consumer costs developed by the U.S. national labs for the U.S. Department of Energy's Building Technologies Office (BTO). Scout benchmark scenario data are suitable for the following example use cases: setting high-level policy goals for the U.S. buildings sector to 2050 (e.g., X% building CO2 emissions reductions vs. 2005 levels by 2030, Y% reductions vs. 2005 levels by 2050); exploring the effects of key dynamics driving U.S. buildings sector energy and CO2 emissions to 2050 that could be affected by policy levers (e.g., raising minimum technology performance levels; accelerating electrification and/or retrofit rates; introducing breakthrough technologies to the market); determining priority segments (regions, building types, and end use/technology types) and sequencing of U.S. buildings sector energy and CO2 emissions reductions to 2050 under a given set of assumptions; and/or identifying the energy and emissions impacts or cost effectiveness of specific technologies or operational approaches of interest—in isolation or after considering competition with other measures in a scenario portfolio. Scenario Summary: A total of 8 scenarios explore the effects of changes across both the demand- and supply-side of building energy use on annual U.S. building energy use and CO2 emissions from 2022–2050. Scenarios are organized into three groups representing low, moderate, and best-case potentials for building decarbonization, respectively.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Beyond PCA: Additional Dimension Reduction Techniques to Consider in the Development of Climate Fingerprints

Abstract Dimension reduction techniques are an essential part of the climate analyst’s toolkit. Due to the enormous scale of climate data, dimension reduction methods are used to identify major patterns of variability within climate dynamics, to create compelling and informative visualizations, and to quantify major named modes such as El Niño–Southern Oscillation. Principal components analysis (PCA), also known as the method of empirical orthogonal functions (EOFs), is the most commonly used form of dimension reduction, characterized by a remarkable confluence of attractive mathematical, statistical, and computational properties. Despite its ubiquity, PCA suffers from several difficulties relevant to climate science: high computational burden with large datasets, decreased statistical accuracy in high dimensions, and difficulties comparing across multiple datasets. In this paper, we introduce several variants of PCA that are likely to be of use in climate sciences and address these problems. Specifically, we introduce non-negative , sparse , and tensor PCA and demonstrate how each approach provides superior pattern recognition in climate data. We also discuss approaches to comparing PCA-family results within and across datasets in a domain-relevant manner. We demonstrate these approaches through an analysis of several runs of the E3SM climate model from 1991 to 1995, focusing on the simulated response to the Mt. Pinatubo eruption; our findings are consistent with a recently identified stratospheric warming fingerprint associated with this type of stratospheric aerosol injection.

Weylandt, Michael↗
DOE OSTI2021

Mechanistic Insights into CO 2 Electroreduction on Ni 2 P: Understanding Its Selectivity toward Multicarbon Products

Recently, nickel phosphides (Ni x P y ) have been reported to enable selective electrochemical formation of multicarbon products (C 3 and C 4 ) via the CO 2 reduction reaction (CO 2 RR); nevertheless, their activities remain low. In order to understand the roots of their high selectivity and low activity and to direct the design of more active Ni x P y -based CO 2 RR catalysts, we investigate the CO 2 RR mechanism on Ni 2 P using density functional theory (DFT) calculations. Iin this work, we reveal that the reaction proceeds through the formate pathway, followed by formaldehyde (H 2 CO*) formation and self-condensation. Moreover, we demonstrate that surface hydride transfer steps, along with surface-mediated C–C coupling, are essential in order to avoid C 1 product formation and boost selectivity toward multicarbon products. In addition, we find that the thermal surface hydride transfer from the surface to the physisorbed CO 2 is one of the key rate-limiting steps, and since it is not electroactive, it cannot be accelerated by applying an overpotential. Finally, our results also show that the hydrogen affinity of the surface and the dynamic surface reconstruction via H adsorption facilitate selective CO 2 reduction and C–C coupling on Ni 2 P. These findings provide an impetus for exploring materials design space to identify the physical principles that govern the thermodynamics of rate-limiting thermal steps in electrocatalytic processes.

36 MATERIALS SCIENCE↗
NASA NTRS2013

Integrated Model Reduction and Control of Aircraft with Flexible Wings

This paper presents an integrated approach to the modeling and control of aircraft with exible wings. The coupled aircraft rigid body dynamics with a high-order elastic wing model can be represented in a nite dimensional state-space form. Given a set of desired output covariance, a model reduction process is performed by using the weighted Modal Cost Analysis (MCA). A dynamic output feedback controller, which is designed based on the reduced-order model, is developed by utilizing output covariance constraint (OCC) algorithm, and the resulting OCC design weighting matrix is used for the next iteration of the weighted cost analysis. This controller is then validated for full-order evaluation model to ensure that the aircraft's handling qualities are met and the uttering motion of the wings suppressed. An iterative algorithm is developed in CONDUIT environment to realize the integration of model reduction and controller design. The proposed integrated approach is applied to NASA Generic Transport Model (GTM) for demonstration.

AEROELASTIC↗
DOE OSTI2025

High-pressure reduction of carbon dioxide in reactive liquid mixtures

Density-functional theory based molecular-dynamics simulations were used to investigate high-pressure chemical reactions in liquid mixtures of CO 2 with several elements (Si, Mn, and Fe) at high temperatures of 2000-3000 K. Our ab initio simulations indicate that these reactant elements can reduce CO 2 to C at high pressures (20 GPa) leading to the formation of C-C chains, with Si by far the most effective carbon-reducing agent. A combined chemical analysis using Bader charge analysis and Crystal Orbital Hamilton Population (COHP) on simulation snapshots shows that significant charge transfer from the reducing element to the C atoms creates instability in the C-O covalent bonds. COHP analysis further shows that Mn/Fe-O and Mn/Fe-C bonding interactions are weaker compared to the Si counterparts. These results further our understanding of the redox chemistry of CO 2 at conditions relevant to planetary mantle interiors and demonstrate the effectiveness of high pressure in the reduction of CO 2 directly to solid carbon.

Ab initio molecular dynamics↗
NASA NTRS1986

Application of computational fluid mechanics to atmospheric pollution problems

One of the most noticeable effects of air pollution on the properties of the atmosphere is the reduction in visibility. This paper reports the results of investigations of the fluid dynamical and microphysical processes involved in the formation of advection fog on aerosols from combustion-related pollutants, as condensation nuclei. The effects of a polydisperse aerosol distribution, on the condensation/nucleation processes which cause the reduction in visibility are studied. This study demonstrates how computational fluid mechanics and heat transfer modeling can be applied to simulate the life cycle of the atmosphereic pollution problems.

Hung, R. J.↗
DOE OSTI2022

GANISP: A GAN-Assisted Importance Splitting Probability Estimator: Preprint

To reduce the variance of rare event probability estimator, genealogical importance splitting marches towards a rare event by iteratively selecting and replicating realizations that are headed towards a rare event. The replication step is made difficult when applied to deterministic systems as the initial conditions of the offspring realizations need to be modified. Typically, a random perturbation is applied to the offspring to differentiate their trajectory from the parent realization. It is shown that a random perturbation strategy may be effective for some systems but may also fail for others, thereby preventing variance reduction in the probability estimate. To address this limitation, it is proposed to use a generative model such as a Generative Adversarial Network (GAN) to generate perturbations that are consistent with the attractor of the dynamical system. The GAN-assisted Importance SPlitting method (GANISP) improves the variance reduction for the system targeted. An implementation of the method is available in a companion repository (https://github.com/NREL/GANISP).

generative adversarial network↗
NASA NTRS1989

Minimal complexity control law synthesis

A paradigm for control law design for modern engineering systems is proposed: Minimize control law complexity subject to the achievement of a specified accuracy in the face of a specified level of uncertainty. Correspondingly, the overall goal is to make progress towards the development of a control law design methodology which supports this paradigm. Researchers achieve this goal by developing a general theory of optimal constrained-structure dynamic output feedback compensation, where here constrained-structure means that the dynamic-structure (e.g., dynamic order, pole locations, zero locations, etc.) of the output feedback compensation is constrained in some way. By applying this theory in an innovative fashion, where here the indicated iteration occurs over the choice of the compensator dynamic-structure, the paradigm stated above can, in principle, be realized. The optimal constrained-structure dynamic output feedback problem is formulated in general terms. An elegant method for reducing optimal constrained-structure dynamic output feedback problems to optimal static output feedback problems is then developed. This reduction procedure makes use of star products, linear fractional transformations, and linear fractional decompositions, and yields as a byproduct a complete characterization of the class of optimal constrained-structure dynamic output feedback problems which can be reduced to optimal static output feedback problems. Issues such as operational/physical constraints, operating-point variations, and processor throughput/memory limitations are considered, and it is shown how anti-windup/bumpless transfer, gain-scheduling, and digital processor implementation can be facilitated by constraining the controller dynamic-structure in an appropriate fashion.

Bernstein, Dennis S.↗
DOE OSTI2023

The Dynamics of Megafire Smoke Plumes in Climate Models: Why a Converged Solution Matters for Physical Interpretations

As the climate system warms, megafires have become more frequent with devastating effects. A byproduct of these events is the creation of smoke plumes that can rise into the stratosphere and spread across the globe where they reside for many months. To gain a deeper understanding of the plume dynamics, global climate simulations of a megafire were performed at a wide range of grid spacings from 2.0° down to 7 km, including a 7 km nonhydrostatic experiment. The analysis focuses on how the resolved dynamics affects the specification of the plume characteristics such as injection height and black carbon (BC) mass. Prior studies initialize the smoke plume at one or a few grid points and this is shown here to produce severely dissipative dynamics. In order to validate such simulations with observations, enhancements of the plume characteristics to offset the dissipation is necessary. Using a numerically converged simulation, sensitivity tests show that to approximate the observed stratospheric lifetime, a reduction in BC fraction by 50% is necessary for external mixtures. The vorticity dynamics of the plume is also analyzed with a Lagrangian budget to understand the mechanisms responsible for the evolution of a collocated anticyclonic vortex. The results can be distilled down into a simple conceptual model. As the plume rises, the air diverges at the top of the updraft where the largest concentrations of smoke are found. This divergence induces a dilution of the background cyclonic absolute vorticity producing an anticyclonic vortex. Vortex decay occurs from opposite arguments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Redox poise in R. rubrum phototrophic growth drives large-scale changes in macromolecular pathways

During photoheterotrophic growth on organic substrates, purple nonsulfur photosynthetic bacteria like Rhodospirillum rubrum can acquire electrons by multiple means, including oxidation of organic substrates, oxidation of inorganic electron donors (e.g., H 2 ), and by reverse electron flow from the photosynthetic electron transport chain. These electrons are stored as reduced electron-carrying cofactors (e.g., NAD(P)H and ferredoxin). The overall ratio of oxidized to reduced cofactors (e.g., NAD(P)+:NAD(P)H), or ’redox poise’, is difficult to understand or predict, as are the cellular processes for dissipating these reducing equivalents. Using physics-based models that capture mass action kinetics consistent with the thermodynamics of reactions and pathways, a range of redox conditions for heterophototrophic growth are evaluated, from conditions in which the NADP+/NADPH levels approach thermodynamic equilibrium to conditions in which the NADP+/NADPH ratio is far above the typical physiological values. Modeling predictions together with experimental measurements indicate that the redox poise of the cell results in large-scale changes in the activity of biosynthetic pathways and, thus, changes in cell macromolecule levels (DNA, RNA, proteins, and fatty acids). Furthermore, modeling predictions indicate that during phototrophic growth, reverse electron flow from the quinone pool is a minor contributor to the production of reduced cofactors (e.g., NAD(P)H) compared to other oxidative processes (H 2 and carbon substrate oxidation). Instead, the quinone pool primarily operates to aid ATP production. The high level of ATP, in turn, drives reduction processes even when NADPH levels are relatively low compared to NADP+ by coupling ATP hydrolysis to the reductive processes. The model, in agreement with experimental measurements of macromolecule ratios of cells growing on different carbon substrates, indicates that the dynamics of nucleotide versus lipid and protein production is likely a significant mechanism of balancing oxidation and reduction in the cell.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Redox Poise during Rhodospirillum rubrum Phototrophic Growth Drives Large-scale Changes in Macromolecular Synthesis Pathways

During photoheterotrophic growth on organic substrates, purple nonsulfur photosynthetic bacteria like Rhodospirillum rubrum can acquire electrons by multiple means, including oxidation of organic substrates, oxidation of inorganic electron donors (e.g., H2), and by reverse electron flow from the photosynthetic electron transport chain. These electrons are stored as reduced electron-carrying cofactors (e.g., NAD(P)H and ferredoxin). The overall ratio of oxidized to reduced cofactors (e.g., NAD(P)+:NAD(P)H), or ’redox poise’, is difficult to understand or predict, as are the cellular processes for dissipating these reducing equivalents. Using physics-based models that capture mass action kinetics consistent with the thermodynamics of reactions and pathways, a range of redox conditions for heterophototrophic growth are evaluated, from conditions in which the NADP+/NADPH levels approach thermodynamic equilibrium to conditions in which the NADP+/NADPH ratio is far above the typical physiological values. Modeling predictions together with experimental measurements indicate that the redox poise of the cell results in large-scale changes in the activity of biosynthetic pathways and, thus, changes in cell macromolecule levels (DNA, RNA, proteins, and fatty acids). Furthermore, modeling predictions indicate that during phototrophic growth, reverse electron flow from the quinone pool is a minor contributor to the production of reduced cofactors (e.g., NAD(P)H) compared to other oxidative processes (H2 and carbon substrate oxidation). Instead, the quinone pool primarily operates to aid ATP production. The high level of ATP, in turn, drives reduction processes even when NADPH levels are relatively low compared to NADP+ by coupling ATP hydrolysis to the reductive processes. The model, in agreement with experimental measurements of macromolecule ratios of cells growing on different carbon substrates, indicates that the dynamics of nucleotide versus lipid and protein production is likely a significant mechanism of balancing oxidation and reduction in the cell.

59 BASIC BIOLOGICAL SCIENCES↗