Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Effect of thermal annealing on the properties of transparent conductive In–Ga–Zn oxide thin films

Amorphous In–Ga–Zn oxide (IGZO) thin films were prepared using radio frequency magnetron sputtering at room temperature. Upon thermal annealing at temperatures even up to 500 °C, the amorphous characteristics were still maintained, but the electronic properties could be considerably enhanced. This could be ascribed to the increased optical band gap and the increased oxygen vacancies, as corroborated by the microstructure characterizations. In addition, the surface became smoother upon thermal annealing, guaranteeing good interface contact between electrode and a-IGZO. The optical transmittance at 400–800 nm exceeded 90% for all samples. All in all, thermal annealing at appropriate temperatures is expected to improve the performances of relevant a-IGZO thin film transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Durability of Polymer Electrolyte Membrane Fuel Cells Operated at Subfreezing Temperatures

The structure, composition, and interfaces of membrane electrode assemblies (MEA) and gas-diffusion layers (GDLs) have a significant effect on the performance of single-proton-exchange-membrane (PEM) fuel cells operated isothermally at subfreezing temperatures. During isothermal constant-current operation at subfreezing temperatures, water forming at the cathode initially hydrates the membrane, then forms ice in the catalyst layer and/or GDL. This ice formation results in a gradual decay in voltage. High-frequency resistance initially decreases due to an increase in membrane water content and then increases over time as the contact resistance increases. The water/ice holding capacity of a fuel cell decreases with decreasing subfreezing temperature (-10°C vs. -20°C vs. -30°C) and increasing current density (0.02 A cm -2 vs. 0.04 A cm -2 ). Ice formation monitored using in-situ high-resolution neutron radiography indicated that the ice was concentrated near the cathode catalyst layer at low operating temperatures (≈-20°C) and high current densities (0.04 A cm -2 ). Significant ice formation was also observed in the GDLs at higher subfreezing temperatures (≈-10°C) and lower current densities (0.02 A cm -2 ). These results are in good agreement with the long-term durability observations that show more severe degradation at lower temperatures (-20°C and -30°C).

30 DIRECT ENERGY CONVERSION↗

Electrochemically-Driven Phase Transformations in Battery Compounds (Final Technical Report)

Ion-insertion compounds for advanced batteries frequently exhibit phase transformations as the concentration of the working ion varies. Under the large electrochemical driving forces inherent to practical use, systems are often driven far from equilibrium and exhibit phase transition behavior not seen in other materials. An improved understanding of phase transformation pathways in electrode materials upon cycling will lead to new materials design concepts and electrochemical duty cycle management strategies that improve capacity utilization at high charge/discharge rates, reduce voltage and capacity hysteresis, and extend battery life. The main goal of this project is to develop a predictive understanding of the phase transition behavior of battery compounds when electrochemically driven far from equilibrium through a combined experimental- theoretical approach. Research focuses on elucidating how the phase transition behaviors in a diverse group of selected model systems (olivines, lithium metal, etc.) are regulated by various factors including transformation strains, plasticity, metastable transformation pathways, electrode microstructure, surface reaction and ion diffusion kinetics, and what are the unique features of phase transitions in battery compounds. To this end, operando X-ray-based characterization techniques are applied to interrogate the structure and composition evolution of electrode materials and interfaces at nano- and meso-scales. Mesoscale modeling techniques such as phase-field simulation are employed to shed light on the experimental observations and establish a unified framework for describing phase transition behaviors in battery compounds.

25 ENERGY STORAGE↗

Wide Band-Gap Perovskites for Tandem Photovoltaics

This research was aimed at development of a mechanically-stacked, perovskite Multi-Junction Solar Cell in which (1) at least one Junction is made of metal-halide perovskite and (2) the Junctions are manufactured in parallel and then stacked to create the final module. This technology presented significant advanced manufacturing challenges and opportunities in getting to scale, including materials scale-up and the development of novel roll-to-roll processing and encapsulation methods. Research conducted was also applicable to a monolithically-integrated perovskite Multi-Junction Solar Cell, in which the two or more Junctions are integrated and electrically connected. The project explored the following technical opportunities in conjunction with the Cyclotron Road mentored entrepreneurial research experience: Fabrication of inorganic heterojunction layers on both sides of a perovskite semiconductor, and modification of interfaces; developed transparent electrode layers on both sides of a perovskite semiconductor; and developed a prototype and optimized perovskite Junction Solar Cell.

14 SOLAR ENERGY↗

Modeling and simulation of electron transport at the nanoscale: illustrations in low-dimensional carbon nanostructures

This chapter showcases a few selected illustrations of various manifestations of nanoscale and molecular electronic effects as investigated by quantum mechanical methods. The examples include results demonstrating (1) how graphitic nanoribbons can be assembled into multi-terminal networks and the influence on electron transport; (2) how the position of a single embedded molecule can be modified to change the overall conduction state of a nanowire; (3) how quantum chemical modeling can lead to the design of electrodes with enhanced interface for molecular coupling; (4) how carbon nanotubes can be assembled into complex covalent arrays and how these can be obtained experimentally; (5) how quantum interference can be understood as emerging from the presence of multiple level of confinements in carbon nanorings; and (6) how new functionality can emerge at the nanoscale due the the interplay of magnetic, electronic, and structural properties of individual graphitic nanoribbons assembled into wiggly-like structures.

Meunier, V.↗

Advanced Characterization Techniques for Sodium-Ion Battery Studies

Sodium (Na)-ion batteries (NIBs) are considered promising alternative candidates to the well-commercialized lithium-ion batteries, especially for applications in large-scale energy storage systems. The electrochemical performance of NIBs such as the cyclability, rate capability, and voltage profiles are strongly dependent on the structural and morphological evolution, phase transformation, sodium-ion diffusion, and electrode/electrolyte interface reconstruction during charge–discharge cycling. Therefore, in-depth understanding of the structure and kinetics of electrode materials and the electrode/electrolyte interfaces is essential for optimizing current NIB systems and exploring new materials for NIBs. Recently, rapid progress and development in spectroscopic, microscopic, and scattering techniques have provided extensive insight into the nature of structural evolution, morphological changes of electrode materials, and electrode/electrolyte interface in NIBs. Here in this review, a comprehensive overview of both static (ex situ) and real-time (in situ or in operando) techniques for studying the NIBs is provided. Lastly, special focus is placed on how these techniques are applied to the fundamental investigation of NIB systems and what important results are obtained.

25 ENERGY STORAGE↗

Contact resistance improvement using interfacial silver nanoparticles in amorphous indium-zinc-oxide thin film transistors

We describe an approach to reduce the contact resistance at compositional conducting/semiconducting indium-zinc-oxide (IZO) homojunctions used for contacts in thin film transistors (TFTs). By introducing silver nanoparticles (Ag NPs) at the homojunction interface between the conducting IZO electrodes and the amorphous IZO channel, we reduce the specific contact resistance, obtained by transmission line model measurements, down to ∼10{sup −2 }Ω cm{sup 2}, ∼3 orders of magnitude lower than either NP-free homojunction contacts or solid Ag metal contacts. The resulting back-gated TFTs with Ag NP contacts exhibit good field effect mobility of ∼27 cm{sup 2}/V s and an on/off ratio >10{sup 7}. We attribute the improved contact resistance to electric field concentration by the Ag NPs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio modeling of transport and thermodynamic stability for hafnia memristive devices

HfO 2 -based memristive switching devices are currently under intensive investigation due to their high performance and mature fabrication techniques. However, several critical issues have to be addressed to bring them from lab to market. We have recently looked into two important issues with the use of density functional theory methods. One is the wide distribution of device resistance in off-states. We have modeled the switching process of a Pt-HfO 2 -Pt structure for which quantized conductance was observed. Oxygen atoms moving inside a conductive oxygen vacancy filament divide the filament into several quantum wells. Device conductance changes exponentially when one oxygen atom moves away from interface into filament. We propose that the high sensitivity of device conductance to the position of oxygen atoms results in the large variation of device off-state resistance. Another issue that we have recently addressed is the poor switching performance of devices based on a TiN-HfO 2 -TiN structure. While recent experiments have shown that by inserting an "oxygen scavenger" metal between positive electrode and oxide significantly improves device performance, the fundamental understanding of the improvement is lacking.We provide detailed understanding how scavenger layers improve device performance. First, we show that Ta insertion facilitates formation of on-states by reducing the formation energy. Second, the inserted Ta layer reduces the Schottky barrier height in the off-states by changing interface electric dipole at the oxide electrode interface. Nevertheless, the device maintains a high on/off resistance ratio. Finally, with Ta insertion the on-state conductance becomes much less sensitive to the specific location from which the oxygen was removed from the oxide. In conclusion, our studies provide fundamental understanding needed for enabling realization of a non-volatile memory technology with reduced energy consumption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-Layer Engineering of La 2-x Sr x CuO 4 —La 2-x Sr x ZnO 4 Heterostructures

The fabrication of trilayer superconductor-insulator-superconductor (SIS) Josephson junctions with high-temperature superconductor (HTS) electrodes requires atomically perfect interfaces. Therefore, despite great interest and efforts, this remained a challenge for over three decades. Here, we report the discovery of a new family of metastable materials, La 2-x Sr x ZnO 4 (LSZO), synthesized by atomic-layer-by-layer molecular beam epitaxy (ALL-MBE). We show that LSZO is insulating and epitaxially compatible with an HTS compound, La 2-x Sr x CuO 4 (LSCO). Since the “parent” compound La 2-x Sr x ZnO 4 (LZO) is easier to grow, here we focus on this material as our insulating layer. Growing LZO at very low temperatures to reduce cation interdiffusion makes LSCO/LZO interfaces atomically sharp. We show that in LSCO/LZO/LSCO trilayers, the superconducting properties of the LSCO electrodes remain undiminished, unlike in previous attempts with insulator barriers made of other materials. This opens prospects to produce high-quality HTS tunnel junctions.

36 MATERIALS SCIENCE↗

Characterizing electronic and atomic structures for amorphous and molecular metal oxide catalysts at functional interfaces by combining soft X-ray spectroscopy and high-energy X-ray scattering

Amorphous thin film materials and heterogenized molecular catalysts supported on electrode and other functional interfaces are widely investigated as promising catalyst formats for applications in solar and electrochemical fuels catalysis. However the amorphous character of these catalysts and the complexity of the interfacial architectures that merge charge transport properties of electrode and semiconductor supports with discrete sites for multi-step catalysis poses challenges for probing mechanisms that activate and tune sites for catalysis. This minireview discusses advances in soft X-ray spectroscopy and high-energy X-ray scattering that provide opportunities to resolve interfacial electronic and atomic structures, respectively, that are linked to catalysis. This review discusses how these techniques can be partnered with advances in nanostructured interface synthesis for combined soft X-ray spectroscopy and high-energy X-ray scattering analyses of thin film and heterogenized molecular catalysts. Further, these combined approaches enable opportunities for the characterization of both electronic and atomic structures underlying fundamental catalytic function, and that can be applied under conditions relevant to device applications.

14 SOLAR ENERGY↗

Effect of electrode manufacturing defects on electrochemical performance of lithium-ion batteries: Cognizance of the battery failure sources

During LIB electrode manufacturing, it is difficult to avoid the certain defects that diminish LIB performance and shorten the life span of the batteries. This study provides a systematic investigation correlating the different plausible defects (agglomeration/blisters, pinholes/divots, metal particle contamination, and non-uniform coating) in a LiNi 0.5 Mn 0.3 Co 0.2 O 2 positive electrode with its electrochemical performance. Additionally, an infrared thermography technique was demonstrated as a nondestructive tool to detect these defects. The findings show that cathode agglomerates aggravated cycle efficiency, and resulted in faster capacity fading at high current density. Electrode pinholes showed substantially lower discharge capacities at higher current densities than baseline NMC 532 electrodes. Metal particle contaminants have an extremely negative effect on performance, at higher C-rates. The electrodes with more coated and uncoated interfaces (non-uniform coatings) showed poor cycle life compared with electrodes with fewer coated and uncoated interfaces. Further, microstructural investigation provided evidence of presence of carbon-rich region in the agglomerated region and uneven electrode coating thickness in the coated and uncoated interfacial regions that may lead to the inferior electrochemical performance. In conclusion, this study provides the importance of monitoring and early detection of the electrode defects during LIB manufacturing processes to minimize the cell rejection rate after fabrication and testing.

25 ENERGY STORAGE↗

A comparative study about electronic structures at rubrene/Ag and Ag/rubrene interfaces

The contact between the electrode and the organic semiconductor is one of the most crucial factors in determining the organic device performance. The development and production technology of different organic devices require the understanding of different types of metal/organic semiconducting thin film interfaces. Comparisons about the electronic structures at Rubrene/Ag and Ag/Rubrene interfaces have been studied using photoemission spectroscopy. The Ag on rubrene interfaces is found to show more interesting and complex natures than its counterpart. The vacuum level (VL) was shifted about 0.51 eV from push back effect for deposition of 5 Å rubrene onto Ag film whereas the electronic features of silver was only suppressed and no energy shift was resulted. While the deposition of 5 Å Ag onto rubrene film leads to the diffusion of the Ag atoms, as a cluster with quantum size effect, inside the film. Angle dependent XPS measurement indicates that diffused metal clusters were present at entire probed depth of the film. Moreover these clusters dope the uppermost surface of the rubrene film which consequences a shift of the electronic states of thick organic film towards higher binding energy. The VL was found to shift about 0.31 eV toward higher binding energy whereas the shift was around 0.21 eV for the electronic states of rubrene layer.

36 MATERIALS SCIENCE↗

Defect redistribution along grain boundaries in SrTiO 3 by externally applied electric fields

During thermal annealing at 1425 °C nominal electric field strengths of 50 V/mm and 150 V/mm were applied along the grain boundary planes of a near 45° (100) twist grain boundary in SrTiO 3 . Electron microscopy characterization revealed interface expansions near the positive electrode around 0.8 nm for either field strength. While the interface width decreased to roughly 0.4 nm after annealing at 50 V/mm, the higher field strength caused decomposition of the boundary structure close to the negative electrode. Electron energy-loss and X-ray photoelectron spectroscopies demonstrated an increased degree of oxygen sublattice distortion at the negative electrode side, and enhanced concentrations of Ti 3+ and Ti 2+ compared to bulk for both single crystals and bicrystals annealed with an external electric field, respectively. Oxygen migration due to the applied electric field causes the observed alteration of grain boundary structures. At sufficiently high field strength the agglomeration of anion vacancies may lead to the decomposition of the grain boundary.

36 MATERIALS SCIENCE↗

Evaluating the solid electrolyte interphase formed on silicon electrodes: A comparison of ex situ X-ray photoelectron spectroscopy and in situ neutron reflectometry

This work details the in situ characterization of the interface between a silicon electrode and an electrolyte using a linear fluorinated solvent molecule, 0.1 M lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in deuterated dimethyl perfluoroglutarate (d6-PF5M 2 ) (1.87 x 10 -2 mS/cm -1 ). The solid electrolyte interphase (SEI) composition and thickness determined via in situ neutron reflectometry (NR) and ex situ X-ray photoelectron spectroscopy (XPS) were compared. The data show that SEI expansion and contraction (breathing) during electrochemical cycling was observed via both techniques; however, ex situ XPS suggests that the SEI thickness increases during Si lithiation and decreases during delithiation, while in situ NR suggests the opposite. The most likely cause of this discrepancy is the selective removal of SEI components (top 20 nm of the SEI) during the electrode rinse process, required to remove electrolyte residue prior to ex situ analysis, demonstrating the necessity of performing SEI characterizations in situ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Electric Double Layer Effects on Charge Transfer at Flow Battery Electrode/Electrolyte Interfaces

The proposal aims to model interfacial processes associated with redox flow batteries (RFB) for grid/stationary storage, with the ultimate goal of helping design new electrolytes, electrodes, redox species, and interfaces. It addresses the linked problems of electric double layer (EDL) structure and electron transfer at model electrode/electrolyte interfaces. Fast electron transfer partly determines which redox species are viable for flow batteries (along with solubility, viscosity, etc.). Commercial systems apply aqueous, vanadium-based complexes, but other choices and organic electrolytes with larger voltage windows are the subject of active research at Sandia and elsewhere. The high salt concentration present in flow battery electrolytes yields non-trivial EDL consisting of solvents, counter-ions, co-ions, and redox species (at different charge states at the charging voltage threshold). EDL strongly influences electron transfer, especially when redox “mediators” are used. Modeling this key missing information is the main challenge. Our proposal seeks to apply Sandia’s LAMMPS molecular dynamics code. As a proof of principle, we study minimal model systems (graphite electrode, with ferrocene and fluornone as redox-active species). These model "catholyte" and "anolyte" molecules exhibit low reorganization energies (in the sense of Marcus theory) and are most amenable to EDL simulations which involve switching of redox states to mimic electron transfer. This study will enable future modeling and design of redox species relevant to flow batteries and redox mediators used at Sandia for other purposes.

25 ENERGY STORAGE↗