Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Cavity-Modulation Autotuner For Hydrogen Maser

Cavity-modulation tuning system maintains resonance of hydrogen-maser cavity automatically, stabilizing maser frequency, without introducing undesirable frequency modulation. System tunes maser cavity rapidly by modulating one of physical characteristics of cavity affecting resonant frequency. Frequency-controlling components of tuning system placed at maser cavity, within maser vacuum. Thermal environment well controlled, and device insensitive to driving signal. Features contribute to stability of maser frequency.

Dick, G. J.↗
NASA NTRS1991

Solid-state lasers for coherent communication and remote sensing

Work in the stabilization of monolithic Nd:YAG lasers and the application of these lasers to nonlinear optical frequency conversion is discussed. The intrinsic stability of semiconductor diode laser pumped solid state lasers has facilitated a number of demonstration in external resonant cavity harmonic generation and stable optical parametric oscillation. Relative laser frequency stabilization of 0.3 Hz was achieved, and absolute stability of a few hundred hertz is anticipated. The challenge is now to reproduce this frequency stability in the output of tunable nonlinear optical devices. Theoretical and experimental work toward this goal are continuing.

Byer, Robert L.↗
NASA NTRSDate not supplied

Advancements in Frequency Domain Analysis of Dual Centerline Propellant Tanks for Space Vehicle Stability and Design

This paper presents advancements in the frequency domain stability analysis for landing and ascent vehicle configurations with dual centerline propellant tanks, developed in support of Guidance, Navigation, and Control (GNC) insight activities for the Human Landing System project. The study focuses on the impact of axial thrust on the dual tank slosh danger zone solution. The frequency domain stability analysis tool is developed within the GeneraLized Aerospace Simulation in Simulink® (GLASS) framework at NASA Marshall Space Flight Center. The frequency domain stability analysis tool is used to determine slosh damping and control systems design requirements. The accuracy of the tool’s instability predictions is validated against time-domain outcomes within the GLASS simulation environment, showing consistent and anticipated results. Additionally, the method is validated by comparing its results with Frequency Domain Analysis and Comparison Tool Assuming Linearity (FRACTAL), a frequency domain analysis tool with extensive heritage and rigorous verification and validation using NASA Ares I-X and SLS flight data. The findings of this paper contribute to a better understanding of dual-tank slosh instability and support improved design and operation margins of space vehicles.

Han Woong (Brian) Bae↗
NASA NTRSDate not supplied

Advancements in Frequency Domain Analysis of Dual Centerline Propellant Tanks for Space Vehicle Stability and Design

This paper presents advancements in the frequency domain stability analysis for landing and ascent vehicle configurations with dual centerline propellant tanks, developed in support of Guidance, Navigation, and Control (GNC) insight activities for the Human Landing System project. The study focuses on the impact of axial thrust on the dual tank slosh danger zone solution. The frequency domain stability analysis tool is developed within the GeneraLized Aerospace Simulation in Simulink® (GLASS) framework at NASA Marshall Space Flight Center. The frequency domain stability analysis tool is used to determine slosh damping and control systems design requirements. The accuracy of the tool’s instability predictions is validated against time-domain outcomes within the GLASS simulation environment, showing consistent and anticipated results. Additionally, the method is validated by comparing its results with Frequency Domain Analysis and Comparison Tool Assuming Linearity (FRACTAL), a frequency domain analysis tool with extensive heritage and rigorous verification and validation using NASA Ares I-X and SLS flight data. The findings of this paper contribute to a better understanding of dual-tank slosh instability and support improved design and operation margins of space vehicles.

Han Woong (Brian) Bae↗
NASA NTRSDate not supplied

CFD-Based Frequency Domain Method for Dynamic Stability Derivative Estimation with Application to Transonic Truss-Braced Wing

This paper presents a dynamic stability estimation technique obtained from high-fidelity CFD simulations of the Mach 0.8 Transonic Truss-Braced Wing (TTBW). A series of unsteady RANS CFD simulations in FUN3D is performed on the TTBW in pitch and plunge oscillations at various reduced frequencies. The time-domain data are transformed into the frequency-domain data by Fourier series. Transfer functions of the dynamic stability derivatives are then estimated by a frequency-domain regression. The dynamic stability derivatives with respect to the angle of attack are determined by the regression of the unsteady aerodynamic coefficients for the plunge motion. The dynamic stability derivatives with respect to the pitch rate are deter-mined by the regression of the differential unsteady aerodynamic coefficients for the pitch motion upon the removal of the angle of attack contribution by the plunge motion. The steady-state stability derivatives are then compared to the results obtained from a stability analysis code VSPAERO as well as steady-state FUN3D simulations. The comparison of the steady-state stability derivatives shows excellent agreement.

Dynamic Stability Derivatives↗
NASA NTRS1972

Theory of two coupled lasers.

A transmitting window is used to weakly couple two resonant optical cavities. When active medium is placed in one cavity, the system describes a laser coupled to a resonant cavity, while active medium in both cavities describes two coupled lasers. Equations of motion for the fields in the two cavities are found. These equations are solved in the steady state when the cavities are sufficiently closely tuned that the lasers in the two cavities oscillate with the same frequency. In the locked situation, the second cavity tends to stabilize the frequency of operation against changes in length of the first cavity. When there is no active medium in the second cavity, and that cavity becomes very long, the laser acts as if it were looking into free space.

Spencer, M. B.↗
NASA NTRS1992

Diode laser stabilization

Center-frequency drift in diode lasers can be reduced by stabilizing the laser to an optical cavity with a low bandwidth feedback loop that acts on the injection current. Resonant optical feedback from a confocal or ring cavity can reduce high frequency noise, yielding linewidths in the 10 kHz range. With either an optical or an electronic lock to a cavity, the laser's wavelength is restricted to those regions that can be reached by temperature and current tuning of the solitary diode; this can be extended to full coverage by means of an extended cavity with a frequency-selective component, such as a diffraction grating.

Fox, R. W.↗
NASA NTRS2000

Wave Driven Non-Linear Flow Oscillator for the 22-Year Solar Cycle

We propose that waves generate an oscillation in the Sun to account for the 22-year magnetic cycle. The mechanism we envision is analogous to that driving the Quasi Biennial Oscillation (QBO) observed in the terrestrial atmosphere, which is well understood in principal. Planetary waves and gravity waves deposit momentum in the background atmosphere and accelerate the flow under viscous dissipation. Analysis shows that such a momentum source represents a non-linearity of third or generally odd order, which generates also the fundamental frequency/period so that an oscillation is maintained without external time dependent forcing. For the Sun, we propose that the wave driven oscillation would occur just below the convection region, where the buoyancy frequency or convective stability becomes small to favor wave breaking and wave mean flow interaction. Using scale analysis to extrapolate from terrestrial to solar conditions, we present results from a simplified analytical model, applied to the equator, that incorporates Hines'Doppler Spread Parameterization for gravity waves (GW). Based on a parametric study, we conclude: (1) Depending on the adopted horizontal wavelengths of GW's, wave amplitudes < 10 m/s can be made to produce oscillating zonal winds of about 25 m/s that should be large enough to generate a corresponding oscillation in the main poloidal magnetic field; (2) The oscillation period can be made to be 22 years provided the buoyancy frequency (stability) is sufficiently small, which would place the oscillating wind field near the base of the convection region; (3) In this region, the turbulence associated with wave processes would be enhanced by low stability, and this also helps to produce the desired oscillation period and generate the dynamo currents that would produce the reversing magnetic field. We suggest that the above mechanism may also drive other long-period metronomes in planetary and stellar interiors.

Mayr, H. G.↗
NASA NTRS1980

Stability boundaries for systems with frequency-model feedback and complacency filter

General parameter-plane equations were derived to generate boundaries for a class of systems characterized by a feedback loop that contains a complementary filter and a model for either the low- or high-frequency portion of the plant. This combination allows those frequencies of the part of the plant that is modeled to be fed back for control while suppressing other frequencies. For all specific examples considered, the stability regions obtained using the complementary filter and frequency model were larger (and in some cases, considerably larger) than those obtained using a low pass filter in the feedback of the system output. Furthermore, higher gain control was possible.

Barker, L. K.↗
NASA NTRS1990

Noise in laser oscillator systems

The aim of the SUNLITE program is to demonstrate the performance of ultra-stable laser systems in the environment of space. The program uses Non-Planar Ring Oscillators (NPRO) which have shown great promise for time and frequency standards with unprecedented resolution and stability. An immediate goal is to test NPRO oscillators in orbital free fall by 1994. During the past year there was remarkable progress in the design and pre-flight testing of the SUNLITE test package. Current theoretical studies are investigating the possible effects of various noise sources on the linewidth and linecenter frequency stability of servocontrolled NPRO lasers. The frequency control system is reviewed and the potential impact on frequency stability of noise sources in the control system and in the environment is considered.

Hafele, Joseph C.↗
NASA NTRS2003

Stabilized Fiber-Optic Distribution of Reference Frequency

An optoelectronic system distributes a reference signal of low noise and highly stabilized phase and frequency (100 MHz) from an atomic frequency standard to a remote facility at a distance up to tens of kilometers. The reference signal is transmitted to the remote station as amplitude modulation of an optical carrier signal propagating in an optical fiber. The stabilization scheme implemented in this system is intended particularly to suppress phase and frequency fluctuations caused by vibrations and by expansion and contraction of the optical fiber and other components in diurnal and seasonal heating and cooling cycles. The system (see figure) comprises several subsystems, the main one being (1) a hydrogen-maser or linear-ion-trap frequency standard in an environmentally controlled room in a signal-processing center (SPC), (2) a stabilized fiber-optic distribution assembly (SFODA), (3) a compensated sapphire oscillator (CSO) in an environmentally controlled room in the remote facility, (4) thermally stabilized distribution amplifiers and cabling from the environmentally controlled room to end users, and (5) performance- measuring equipment.

Calhoun, Malcolm↗
NASA NTRS1990

Measurement and analysis of a microwave oscillator stabilized by a sapphire dielectric ring resonator for ultra-low noise

Phase-noise measurements are presented for a microwave oscillator whose frequency is stabilized by a whispering-gallery sapphire ring resonator with Q of 200,000. This mode involves little metallic conduction and allows nearly full use of the very low dielectric loss in sapphire. Several mode families have been identified, in good agreement with frequency calculations. For a 5-cm wheel resonator in a 7.6-cm container, Q values above 100,000 were found at room temperature for all of the modes in this sequence. Coupling Q-values for these same modes ranged from 10,000 (n = 5) to 100,000 (n = 10) for a WR112 waveguide port at the center of the cylinder wall of the containing can. Phase noise measurements for a transistor oscillator locked to the n = 10 (7.84-GHz) mode showed a 1/f cubed dependence for low offset frequencies, and a value of L(f) = -55 dB/Hz at an offset of 10 Hz from the carrier.

Dick, G. John↗
NASA NTRS1990

Fiber-Optic Frequency-Transfer Link

System for distribution of 100-MHz reference signal features transmission through optical fiber to station 22 km away and stabilization of frequency by radio frequency phase-conjugation method. Compensates for variations in phase (caused mostly by changes in temperature along optical fiber) of signal arriving at remote station. Involves measurement and control of phases of transmitted and reflected signals at reference station to obtain reference phase at remote station.

Primas, L. E.↗
NASA NTRS2005

Test Frame for Gravity Offload Systems

Advances in space telescope and aperture technology have created a need to launch larger structures into space. Traditional truss structures will be too heavy and bulky to be effectively used in the next generation of space-based structures. Large deployable structures are a possible solution. By packaging deployable trusses, the cargo volume of these large structures greatly decreases. The ultimate goal is to three dimensionally measure a boom's deployment in simulated microgravity. This project outlines the construction of the test frame that supports a gravity offload system. The test frame is stable enough to hold the gravity offload system and does not interfere with deployment of, or vibrations in, the deployable test boom. The natural frequencies and stability of the frame were engineered in FEMAP. The test frame was developed to have natural frequencies that would not match the first two modes of the deployable beam. The frame was then modeled in Solidworks and constructed. The test frame constructed is a stable base to perform studies on deployable structures.

Murray, Alexander R.↗
NASA NTRS1993

LOX/hydrocarbon rocket engine analytical design methodology development and validation. Volume 2: Appendices

This final report includes a discussion of the work accomplished during the period from Dec. 1988 through Nov. 1991. The objective of the program was to assemble existing performance and combustion stability models into a usable design methodology capable of designing and analyzing high-performance and stable LOX/hydrocarbon booster engines. The methodology was then used to design a validation engine. The capabilities and validity of the methodology were demonstrated using this engine in an extensive hot fire test program. The engine used LOX/RP-1 propellants and was tested over a range of mixture ratios, chamber pressures, and acoustic damping device configurations. This volume contains time domain and frequency domain stability plots which indicate the pressure perturbation amplitudes and frequencies from approximately 30 tests of a 50K thrust rocket engine using LOX/RP-1 propellants over a range of chamber pressures from 240 to 1750 psia with mixture ratios of from 1.2 to 7.5. The data is from test configurations which used both bitune and monotune acoustic cavities and from tests with no acoustic cavities. The engine had a length of 14 inches and a contraction ratio of 2.0 using a 7.68 inch diameter injector. The data was taken from both stable and unstable tests. All combustion instabilities were spontaneous in the first tangential mode. Although stability bombs were used and generated overpressures of approximately 20 percent, no tests were driven unstable by the bombs. The stability instrumentation included six high-frequency Kistler transducers in the combustion chamber, a high-frequency Kistler transducer in each propellant manifold, and tri-axial accelerometers. Performance data is presented, both characteristic velocity efficiencies and energy release efficiencies, for those tests of sufficient duration to record steady state values.

Niiya, Karen E.↗
DOE OSTI2024

Results and Limits of Time-Division Multiplexing for the BICEP Array High-Frequency Receivers

Time-division multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high-frequency receivers, observing at 150 GHz and 220/270 GHz, will have 7776 TES detectors tiled on the focal plane. The constraints set by these two receivers required a redesign of the warm readout electronics. The new version of the standard multichannel electronics, developed and built at the University of British Columbia, is presented here for the first time. BICEP Array operates time-division multiplexing readout technology to the limits of its capabilities in terms of multiplexing rate, noise and cross talk, and applies them in rigorously demanding scientific application requiring extreme noise performance and systematic error control. Finally, future experiments like CMB-S4 plan to use TES bolometers with time-division/SQUID-based readout for an even larger number of detectors.

47 OTHER INSTRUMENTATION↗