Search NASA⌕ Search

SEARCH · Search NASA

Results for “gravity data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

The Magellan mission to Venus

The Magellan mission will be the next NASA mission to Venus. This paper describes the mission as it is currently planned, showing how the design of the science payload, the spacecraft, and the mission satisfies the science objectives and requirements as well as other programmatic constraints. The Magellan mission is dedicated to obtaining SAR images of at least 70 percent of the surface of Venus at a resolution of 1 km per line-pair, or better, which is comparable to the coverage and resolution of the Mars Mariner 9 mission. Other investigations will study the geophysical characteristics of the planet using altimetric data and gravity field measurements, and measurements to determine global surface emissivity.

Dallas, S. S.↗

Space Shuttle to deploy Magellan planetary science mission

The objectives of Space Shuttle Mission STS-30 are described along with major flight activities, prelaunch and launch operations, trajectory sequence of events, and landing and post-landing operations. The primary objective of STS-30 is to successfully deploy the Magellan spacecraft into low earth orbit. Following deployment, Magellan will be propelled to its Venus trajectory by an Inertial Upper Stage booster. The objectives of the Magellan mission are to obtain radar images of more than 70 percent of Venus' surface, a near-global topographic map, and near-global gravity field data. Secondary STS-30 payloads include the Fluids Experiment Apparatus (FEA) and the Mesoscale Lightning Experiment (MLE).

Source record↗

Mapping of Landsat satellite and gravity lineaments in west Tennessee

The analysis of earthquake fault lineament patterns within the alluvial valley of west Tennessee, which is often made difficult by the presence of unconsolidated sediments, is presently undertaken through a synergistic use of Landsat satellite images in conjunction with gravity anomaly data, which were quantitatively analyzed and compared by means of two-dimensional histograms and rose diagrams. The northeastern trend revealed for the lineaments corresponds to faults and is in keeping with reactivation of the Reelfoot rift near the Mississippi River; this suggests that deeper features, perhaps at earthquake focal depth, may extend to the land surface as Landsat-detectable lineaments.

Argialas, Demetre P.↗

Orbit determination by solving for gravity parameters with multiple arc data

The orbit of a satellite that repeats in the earth fixed coordinates is determined by combining GPS tracking data from multiple arcs. The satellite dynamics are modeled with the epoch state and a set of parameters, called the bin parameters, that account for the effect of the local gravitational field on the satellite current state. The epoch state is specific to each arc, and the bin parameters are common to all repeat arcs. The estimation algorithm is based on the Square Root Information Filter. It involves partitioning of the measurement matrix and use of the Householder transformation to combine multiple arc data and solve for the epoch states and the bin parameters. The bin parameters can then be converted into the earth's gravitational field with a modest amount of computation.

Wu, Jiun-Tsong↗

Magellan in transition

Aerobraking Magellan would provide the possibility of obtaining gravity field data for Venus all the way to the poles. Attempts to accomplish aerobraking, which began on May 25, 1993 in the Magellan Transition Experiment, are discussed.

Doody, Dave↗

Gravity Fields from CHAMP Mission Data

The CHAMP mission, launched in July 2000, is the first in a series of missions that will revolutionize our ability to model the Earth s geopotential. The CHAMP spacecraft is equipped for precision tracking by the Global Positioning System (GPS) and Satellite Laser Ranging (SLR) along with a precision accelerometer to provide measurements of the surface forces. Preliminary satellite-only geopotential solutions with only 30 days of CHAMP data are, by some criteria, as strong as solutions made from tracking data collected over the previous 30 years of the space age. Compared to EGM96, CHAMP makes notable contributions in regions where the terrestrial data (surface gravimetry and altimetry) were weak, for example in the polar regions, in the Amazon and the Himalayas. The CHAMP data allow us to separate the geoid from the dynamic ocean topography (DOT) up to at least degree 25 rather than just under degree 20 as in EGM96. We report on satellite-only and combination models that incorporate up to 100 days of CHAMP data as well as other satellite data. We report on our updated processing of the CHAMP tracking and accelerometer data and evaluate the performance of the geopotential models using a variety of tests.

Lemoine, Frank G.↗

Field Effects of Buoyancy on a Premixed Turbulent Flame Studied by Particle Image Velocimetry

Typical laboratory flames for the scientific investigation of flame/turbulence interactions are prone to buoyancy effects. Buoyancy acts on these open flame systems and provides upstream feedbacks that control the global flame properties as well as local turbulence/flame interactions. Consequently the flame structures, stabilization limits, and turbulent reaction rates are directly or indirectly coupled with buoyancy. The objective of this study is to characterize the differences between premixed turbulent flames pointing upwards (1g), pointing downwards (-1g), and in microgravity (mg). The configuration is an inverted conical flame stabilized by a small cone-shaped bluff body that we call CLEAN Flames (Cone-Stabilized Lean Flames). We use two laser diagnostics to capture the velocity and scalar fields. Particle image velocimetry (PIV) measures the mean and root mean square velocities and planar imaging by the flame fronts method outlines the flame wrinkle topology. The results were obtained under typical conditions of small domestic heating systems such as water heaters, ovens, and furnaces. Significant differences between the 1g and -1g flames point to the need for including buoyancy contributions in theoretical and numerical calculations. In Earth gravity, there is a complex coupling of buoyancy with the turbulent flow and heat release in the flame. An investigation of buoyancy-free flames in microgravity will provide the key to discern gravity contributions. Data obtained in microgravity flames will provide the benchmark for interpreting and analyzing 1g and -1g flame results.

Cheng, Robert K.↗

Interiors of Enceladus and Rhea

Measurement method and data set: Gravity field parameters determined by means of range rate measurements over multiple arcs across flyby. Optical imaging not required when reliable a priori estimates of spacecraft state vector are available. Interior of Enceladus: Density of 1605 +/-14 kg/cu m, higher than pre-Cassini estimates, requires a substantial amount of rock to warmer interior to enhance likelihood of differentiation of water from rock-metal. Assume no porosity. Assuming Io s mean density for the rock-metal component, one finds its fractional mass to be 0.52+/-0.06. There is evidence that Enceladus may be differentiated: a) Areas devoid of craters must be geologically young. b) Systems of ridges, fractures, and groove indicate that the surface has been tectonically altered. c) Viscous relaxation of craters has occurred, and d) The plumes near the South pole indicate venting of subsurface volatiles.

gravity fields↗

Fluid Merging Viscosity Measurement (FMVM) Experiment on the International Space Station

The concept of using low gravity experimental data together with fluid dynamical numerical simulations for measuring the viscosity of highly viscous liquids was recently validated on the International Space Station (ISS). After testing the proof of concept for this method with parabolic flight experiments, an ISS experiment was proposed and later conducted onboard the ISS in July, 2004 and subsequently in May of 2005. In that experiment a series of two liquid drops were brought manually together until they touched and then were allowed to merge under the action of capillary forces alone. The merging process was recorded visually in order to measure the contact radius speed as the merging proceeded. Several liquids were tested and for each liquid several drop diameters were used. It has been shown that when the coefficient of surface tension for the liquid is known, the contact radius speed can then determine the coefficient of viscosity for that liquid. The viscosity is determined by fitting the experimental speed to theoretically calculated contact radius speed for the same experimental parameters. Experimental and numerical results will be presented in which the viscosity of different highly viscous liquids were determined, to a high degree of accuracy, using this technique.

Antar, Basil N.↗

Comparison of Polar Motion Excitation Series Derived from GRACE and from Analyses of Geophysical Fluids

Three sets of degree-2, order-1 harmonics of the gravity field, derived from the Gravity Recovery and Climate Experiment (GRACE) data processed at the Center for Space Research (CSR), Jet Propulsion Laboratory (JPL) and GeoforschungsZentrum (GFZ), are used to compute polar motion excitation functions X1 and X2. The GFZ and JPL excitations and the CSR X2, excitation compare generally well with geodetically observed excitation after removal of effects of oceanic currents and atmospheric winds. The agreement considerably exceeds that from previous GRACE data releases. For the JPL series, levels of correlation with the geodetic observations and the variance explained are comparable to, but still lower than, those obtained independently from available models and analyses of the atmosphere, ocean, and land hydrology. Improvements in data quality of gravity missions are still needed to deliver even tighter constraints on mass-related excitation of polar motion.

Nastula, J.↗

Viscosity Measurement via Drop Coalescence: A Space Station Experiment

The concept of using low gravity experimental data together with CFD simulations for measuring the viscosity of highly viscous liquids was recently validated on onboard the International Space Station (ISS). A series of microgravity tests were conducted for this purpose on the ISS in July, 2004 and in May of 2005. In these experiments two liquid drops were brought manually together until they touched and were allowed to coalesce under the action of the capillary force alone. The coalescence process was recorded photographically from which the contact radius speed of the merging drops was measured. The liquid viscosity was determined by fitting the measured data with accurate numerical simulation of the coalescence process. Several liquids were tested and for each liquid several drop diameters were employed. Experimental and numerical results will be presented in which the viscosity of several highly viscous liquids were determined using this technique.

Antar, Basil↗

Estimating Small-Body Gravity Field from Shape Model and Navigation Data

This paper presents a method to model the external gravity field and to estimate the internal density variation of a small-body. We first discuss the modeling problem, where we assume the polyhedral shape and internal density distribution are given, and model the body interior using finite elements definitions, such as cubes and spheres. The gravitational attractions computed from these approaches are compared with the true uniform-density polyhedral attraction and the level of accuracies are presented. We then discuss the inverse problem where we assume the body shape, radiometric measurements, and a priori density constraints are given, and estimate the internal density variation by estimating the density of each finite element. The result shows that the accuracy of the estimated density variation can be significantly improved depending on the orbit altitude, finite-element resolution, and measurement accuracy.

Covariance Analysis↗

Interplanetary Trajectory Design for NASA's Common Probe Study

The Galileo Probe, Pioneer-Venus probes, and SPRITE concept all share a number of common characteristics. They all follow a similar entry and descent sequence, using an aeroshell to protect against entry environments, and parachutes to aid in extrusion and descent speed control of the descent vehicle containing the science instruments. The descent vehicles all contained similar instruments (e.g. mass spectrometers and atmosphere structure sensors), and data was either relayed back to a carrier spacecraft (Galileo Probe, SPRITE) or transmitted direct to Earth (Pioneer-Venus). Based on these similar characteristics, NASA initiated a study to investigate a “common probe' that might be designed to perform similar science in a variety of planetary environments. This concept would leverage a common aeroshell design, and descent vehicle designs that could be made as similar as possible (the primary exception being that Venus will require a pressure vessel due to the extreme pressures and temperatures seen in the lower portion of the descent). To support the Common Probe study, GSFC and JPL performed a series of interplanetary trajectory analyses to help develop the mission designs for Venus, Jupiter, Saturn, Uranus, and Neptune. Primary considerations in the trajectory modeling included: a maximum of 12-year time of flight (for outer planet destinations), generation of both steep and shallow entry trajectories to each destination (where steep and shallow resulted in approximately 150 g and 50 g peak deceleration during entry at each location), and consideration of the data relay. Gravity assists and trajectories with low delta-V requirements (typically much less than 500 m/s) were also incorporated into the design process to enable launch on existing vehicles such as the Atlas V.

Hughes, Kyle M.↗

Orbital Collector Concept

This is a concept for a system that can perform most aspects of recycling/manufacturing in zero-g & low-g space environments. The system consists primarily of a rotating arm that provides artificial gravity, power, data, and mechanical connections to different modules designed for individual aspects of recycling/manufacturing. The modules are designed to contain the materials being processed, thereby preventing the system from generating external debris during recycling/manufacturing. This system is designed to complement the abilities of the Orbital Workshop (see NTR 1662994822).

manufacturing↗

New error calibration tests for gravity models using subset solutions and independent data - Applied to GEM-T3

A new method has been developed to provide a direct test of the error calibrations of gravity models based on actual satellite observations. The basic approach projects the error estimates of the gravity model parameters onto satellite observations, and the results of these projections are then compared with data residual computed from the orbital fits. To allow specific testing of the gravity error calibrations, subset solutions are computed based on the data set and data weighting of the gravity model. The approach is demonstrated using GEM-T3 to show that the gravity error estimates are well calibrated and that reliable predictions of orbit accuracies can be achieved for independent orbits.

Lerch, F. J.↗

First tsunami gravity wave detection in ionospheric radio occultation data

After the 11 March 2011 earthquake and tsunami off the coast of Tohoku, the ionospheric signature of the displacements induced in the overlying atmosphere has been observed by ground stations in various regions of the Pacific Ocean. We analyze here the data of radio occultation satellites, detecting the tsunami-driven gravity wave for the first time using a fully space-based ionospheric observation system. One satellite of the Constellation Observing System for Meteorology, Ionosphere and Climate (COSMIC) recorded an occultation in the region above the tsunami 2.5 h after the earthquake. The ionosphere was sounded from top to bottom, thus providing the vertical structure of the gravity wave excited by the tsunami propagation, observed as oscillations of the ionospheric Total Electron Content (TEC). The observed vertical wavelength was about 50 km, with maximum amplitude exceeding 1 total electron content unit when the occultation reached 200 km height. We compared the observations with synthetic data obtained by summation of the tsunami-coupled gravity normal modes of the Earth/Ocean/atmosphere system, which models the associated motion of the ionosphere plasma. These results provide experimental constraints on the attenuation of the gravity wave with altitude due to atmosphere viscosity, improving the understanding of the propagation of tsunami-driven gravity waves in the upper atmosphere. They demonstrate that the amplitude of the tsunami can be estimated to within 20% by the recorded ionospheric data.

58 GEOSCIENCES↗