Search NASA⌕ Search

SEARCH · Search NASA

Results for “gridded data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

[Low-Frequency Flow Oscillation

The results of the research conducted under this grant are presented in detail in three Master theses, by Heinrich, Balow, and Broeren. Additional analysis of the experimental data can be found in two AIAA Journal articles and two conference papers. Citations for all of the studies' publications can be found in the bibliography which is attached. The objective of Heinrich's study was to document the low-frequency flow oscillation on the LRN-1007 airfoil, which had been previously observed at low Reynolds number, to determine its origin, and explore the phenomenon at higher Reynolds number. Heinrich performed detailed flow visualization on the airfoil using surface fluorescent oil and laser-sheet off-body visualization. A large leading-edge separation bubble and trailing-edge separation was identified on the airfoil just prior to the onset of the unsteady stall flow oscillation. From the laser-sheet data, the unsteady flow appeared as a massive boundary-layer separation followed by flow reattachment. Hot-wire data were taken in the wake to identify the presence of the flow oscillation and the dominant frequency. The oscillation was found in the flow from a Reynolds number of 0.3 to 1.3 x 10 exp 6. The Strouhal number based on airfoil projected height was nominally 0.02 and increased slightly with increasing Reynolds number and significantly with increasing airfoil angle of attack. Balow focused his research on the leading-edge separation bubble which was hypothesized to be the origin of the low-frequency oscillation. Initially, experimental measurements in the bubble at the onset of the low-frequency oscillation were attempted to study the characteristics of the bubble and explain possible relationships to the shear-layer-flapping phenomena. Unfortunately, the bubble proved to be extremely sensitive to the probe interference and it drastically reduced the size of the bubble. These detailed measurements were then abandoned by Balow. However, this led to a series of tests where the leading-edge bubble and trailing-edge separation were altered and the affect on the flow-oscillation studied. Balow found that by tripping the airfoil boundary-layer with "zigzag" tape ahead of bubble separation, the bubble was effectively eliminated mid the oscillation suppressed. Wake survey drag measurements showed a drastic reduction in airfoil drag when the bubble and oscillation were eliminated. Using the "zigzag" tape, the trailing-edge separation was moved downstream approximately 5 percent chord. This was found to reduce the amplitude of the oscillation, particularly in the onset stage at low angle of attack (around 14 degrees). Through detailed analysis of the wake behind the airfoil during the unsteady flow oscillation, Balow provided a better understanding of the wake flowfield. Broeren studied the oscillating flowfield in detail at Reynolds number equal 3 x 10 exp 5 and an angle of attack of 15 degrees using laser Doppler velocimetry (LDV). Two-dimensional LDV data were acquired at 687 grid points above the model upper surface while hot-wire data were taken simultaneously in the wake. Using the hot-wire signal, the LDV data were phase averaged into 24 bins to represent a single ensemble average of one oscillation cycle. The velocity data showed a flowfield oscillation that could be divided into three flow regimes. In the first regime, the flow over the airfoil was completely separated initially, the flowfield reattached from the leading edge and the reattachment point moved downstream with increasing time or phase. Broeren referred to this as the reattachment regime. The bubble development regime followed, where a leading-edge separation bubble formed at the leading edge and grew with increasing time. During the initial part of this regime the trailing-edge separation continued to move downstream. However, during the last 30 degrees of phase the trailing-edge separation moved rapidly forward and appeared to merge with the leading-edge bubble. During the third regime, the separation regime, the flow was segmented from the airfoil leading edge and did not reattach to the airfoil surface. The reverse flow was seen to grow in vertical extent up from the model surface as the phase increased. Next reattachment began again at the leading edge signaling the start of the reattachment regime, and so the cycle continued. From Broeren's work, the details of the unsteady flowfield over the airfoil were seen for the first time. From this research a great deal has been learned about the low-frequency flow oscillation which naturally occurs on the LRN-1007 airfoil near stall. The oscillation was seen to persist at higher Reynolds number, the dependence of the Strouhal number on angle of attack and Reynolds number were discovered, the critical role played by the laminar bubble was shown and the entire upper surface flowfield during a flow oscillation cycle was measured and analyzed. What still eludes understanding is the scaling of the flow oscillation and why certain airfoils, such as the LRN, have a very strong low-frequency mode and other airfoils exhibit no organized low-frequency oscillation at all.

Bragg, Michael B.↗
NASA NTRS2001

The State of NASA's Information Power Grid

This viewgraph presentation transfers the concept of the power grid to information sharing in the NASA community. An information grid of this sort would be characterized as comprising tools, middleware, and services for the facilitation of interoperability, distribution of new technologies, human collaboration, and data management. While a grid would increase the ability of information sharing, it would not necessitate it. The onus of utilizing the grid would rest with the users.

Johnston, William E.↗
NASA NTRS2011

Jitter Controller Software

Sinusoidal jitter is produced by simply modulating a clock frequency sinusoidally with a given frequency and amplitude. But this can be expressed as phase jitter, frequency jitter, or cycle-to-cycle jitter, rms or peak, absolute units, or normalized to the base clock frequency. Jitter using other waveforms requires calculating and downloading these waveforms to an arbitrary waveform generator, and helping the user manage relationships among phase jitter crest factor, frequency jitter crest factor, and cycle-to-cycle jitter (CCJ) crest factor. Software was developed for managing these relationships, automatically configuring the generator, and saving test results documentation. Tighter management of clock jitter and jitter sensitivity is required by new codes that further extend the already high performance of space communication links, completely correcting symbol error rates higher than 10 percent, and therefore typically requiring demodulation and symbol synchronization hardware to operating at signal-to-noise ratios of less than one. To accomplish this, greater demands are also made on transmitter performance, and measurement techniques are needed to confirm performance. It was discovered early that sinusoidal jitter can be stepped on a grid such that one can connect points by constant phase jitter, constant frequency jitter, or constant cycle-cycle jitter. The tool automates adherence to a grid while also allowing adjustments off-grid. Also, the jitter can be set by the user on any dimension and the others are calculated. The calculations are all recorded, allowing the data to be rapidly plotted or re-plotted against different interpretations just by changing pointers to columns. A key advantage is taking data on a carefully controlled grid, which allowed a single data set to be post-analyzed many different ways. Another innovation was building a software tool to provide very tight coupling between the generator and the recorded data product, and the operator's worksheet. Together, these allowed the operator to sweep the jitter stimulus quickly along any of three dimensions and focus on the response of the system under test (response was jitter transfer ratio, or performance degradation to the symbol or codeword error rate). Additionally, managing multi-tone and noise waveforms automated a tedious manual process, and provided almost instantaneous decision- making control over test flow. The code was written in LabVIEW, and calls Agilent instrument drivers to write to the generator hardware.

Lansdowne, Chatwin↗
NASA NTRS2018

Development of Gridded Innovations and Observations Supplement to MERRA-2

Atmospheric reanalysis have become an important source of data for weather and climate research, owing to the continuity of the data, but especially because of the multitude of observational data included (radiosondes, commercial aircraft, retrieved data products and radiances). However, the presence of assimilated observations can vary based on numerous factors, and so it is difficult or impossible for a researcher to say with any degree of certainty how many and what type of observations contributed to the reanalysis data they are using at any give point in time or space, or their contribution to the eventual analyzed fields. For example, quality control, transmission interruptions, and station outages can occasionally affect data availability. While orbital paths are known, drift in certain instruments, cloud clearing, and the large number of available instruments makes it challenging to know which satellite is observing any region at any point in the diurnal cycle. Furthermore, there is information from the statistics generated by the data assimilation that can help understand the model and the quality of the reanalysis. Typically, the assimilated observations and their innovations are saved in observation-space data formats and are not easily made available to reanalysis users.Here, we present an early version of a data set has been developed to make the MERRA-2 assimilated observations available for rapid and general use, by simplifying the data format. The observations are binned to a grid similar as MERRA-2 and saved as netCDF. This data collection includes the mean and number of observations in the bin as well as its variance. The data will also include the innovations from the data assimilation, the forecast departure and the analysis increment, as well as bias correction (for satellite radiances). In this paper, we present the data format (called MERRA-2 Gridded Innovations and Observations or GIO) and its strengths and limitations with some initial testing and validation of the methodology.

Bosilovich, Michael G.↗
NASA NTRS1992

Enhancing control of grid distribution in algebraic grid generation

Three techniques are presented to enhance the control of grid-point distribution for a class of algebraic grid generation methods known as the two-, four- and six-boundary methods. First, multidimensional stretching functions are presented, and a technique is devised to construct them based on the desired distribution of grid points along certain boundaries. Second, a normalization procedure is proposed which allows more effective control over orthogonality of grid lines at boundaries and curvature of grid lines near boundaries. And third, interpolating functions based on tension splines are introduced to control curvature of grid lines in the interior of the spatial domain. In addition to these three techniques, consistency conditions are derived which must be satisfied by all user-specified data employed in the grid generation process to control grid-point distribution. The usefulness of the techniques developed in this study was demonstrated by using them in conjunction with the two- and four-boundary methods to generate several grid systems, including a three-dimensional grid system in the coolant passage of a radial turbine blade with serpentine channels and pin fins.

Steinthorsson, E.↗
NASA NTRS1984

Flow prediction for propfan configurations using Euler equations

An Euler code has been developed for the analysis of a wing-mounted propfan configuration. Surface-fitted grids are used to represent the wing, fuselage, and nacelle geometry. The propeller is simulated by an actuator disk along a computational plane. A grid embedding technique is employed to capture detailed flow field resolution in the vicinity of the engine exhaust plume. Results of a NASA turboprop configuration are compared with test data. Specific issues on grid embedding and methods of resolving them are discussed.

Yu, N. J.↗
NASA NTRS2002

Propulsion Simulations with the Unstructured-Grid CFD Tool TetrUSS

A computational investigation has been completed to assess the capability of the NASA Tetrahedral Unstructured Software System (TetrUSS) for simulation of exhaust nozzle flows. Three configurations were chosen for this study: (1) a fluidic jet effects model, (2) an isolated nacelle with a supersonic cruise nozzle, and (3) a fluidic pitchthrust- vectoring nozzle. These configurations were chosen because existing data provided a means for measuring the ability of the TetrUSS flow solver USM3D for simulating complex nozzle flows. Fluidic jet effects model simulations were compared with structured-grid CFD (computational fluid dynamics) data at Mach numbers from 0.3 to 1.2 at nozzle pressure ratios up to 7.2. Simulations of an isolated nacelle with a supersonic cruise nozzle were compared with wind tunnel experimental data and structured-grid CFD data at Mach numbers of 0.9 and 1.2, with a nozzle pressure ratio of 5. Fluidic pitch-thrust-vectoring nozzle simulations were compared with static experimental data and structured-grid CFD data at static freestream conditions and nozzle pressure ratios from 3 to 10. A fluidic injection case was computed with the third configuration at a nozzle pressure ratio of 4.6 and a secondary pressure ratio of 0.7. Results indicate that USM3D with the S-A turbulence model provides accurate exhaust nozzle simulations at on-design conditions, but does not predict internal shock location at overexpanded conditions or pressure recovery along a boattail at transonic conditions.

Deere, Karen A.↗
NASA NTRS1976

Aerodynamic results of a separation effects test on a 0.010-scale model (52-OTS) of the integrated SSV in the AEDC/VKF 40-by-40 inch supersonic wind tunnel A (IA111), volume 1

Graphical data obtained during experimental wind tunnel aerodynamic investigations of a 0.010 scale model (52-OTS) of the integrated space shuttle vehicle was presented. The purpose of this investigation was to obtain data with the solid rocket booster (SRB) in proximity to the orbiter/external tank (O/ET), over a large O/ET initial angle of attack and sideslip range, as well as data on the SRB alone (greatly separated from the O/ET). A captive trajectory system, which supported the SRB, was used with the tunnel primary sector (supporting the O/ET) to obtain grid type separation effects data. One symmetrical SRB model was used interchangeably to obtain right-hand and left-hand SRB data. The entire investigation was conducted at a free-stream Mach number of 4.5 at unit Reynolds number of 3.95 and 5.9 million per foot.

Chee, E.↗
NASA NTRS1976

Aerodynamic results of a separation effects test on a 0.010-scale model (52-OTS) of the integrated SSV in the AEDC/VKF 40-by-40 inch supersonic wind tunnel A (IA111), volume 2

Tabular data obtained during experimental wind tunnel aerodynamic investigations of a 0.010 scale model (52-OTS) of the integrated space shuttle vehicle was presented. The purpose of this investigation was to obtain data with the solid rocket booster (SRB) in proximity to the orbiter/external tank (O/ET), over a large O/ET initial angle of attack and sideslip range, as well as data on the SRB alone (greatly separated from the O/ET). A captive trajectory system, which supported the SRB, was used with the tunnel primary sector (supporting the O/ET) to obtain grid type separation effects data. One symmetrical SRB model was used interchangeably to obtain right-hand and left-hand SRB data. The entire investigation was conducted at free-stream Mach number of 4.5 at unit Reynolds number of 3.95 and 5.9 million per foot.

Chee, E.↗
NASA NTRS1982

Characteristics of ageostrophic flow in the vicinity of a severe weather outbreak - AVE-SESAME I

GOES satellite data was used to examine the ageostrophic flow in the vicinity of severe weather outbreaks along the Red River between Texas and Oklahoma in April 1979. The observations were part of the NASA AVE-SESAME I data on atmospheric states close to severe weather conditions. The Barnes Objective Analysis Technique was employed to analyze the data on a 100 km grid. The ageostrophic wind was defined on a regional scale from satellite data on different levels of cloud wind vectors, with a height change signalling a short-wave system in a long-wave trough. The percentage of deviation of the subgeostrophic winds from the geostrophic wind was calculated, and maximum departure corresponded with the region of greatest storm development. Time cross sections of additions to the ageostrophic flow were made as a function of pressure at 100 mb intervals from 900-100 mb. The ageostrophic acceleration was consistently twice the geostrophic acceleration.

Arnold, J. E.↗
NASA NTRS1992

GridMan: A grid manipulation system

GridMan is an interactive grid manipulation system. It operates on grids to produce new grids which conform to user demands. The input grids are not constrained to come from any particular source. They may be generated by algebraic methods, elliptic methods, hyperbolic methods, parabolic methods, or some combination of methods. The methods are included in the various available structured grid generation codes. These codes perform the basic assembly function for the various elements of the initial grid. For block structured grids, the assembly can be quite complex due to a large number of clock corners, edges, and faces for which various connections and orientations must be properly identified. The grid generation codes are distinguished among themselves by their balance between interactive and automatic actions and by their modest variations in control. The basic form of GridMan provides a much more substantial level of grid control and will take its input from any of the structured grid generation codes. The communication link to the outside codes is a data file which contains the grid or section of grid.

Eiseman, Peter R.↗
NASA NTRS1994

Regional-scale flows in mountainous terrain. Part 1: A numerical and observational comparison

This study uses observed data and a numerical simulation to examine the generation of thermally driven flows across the Colorado mountain barrier on meso-beta to meso-alpha scales. The observations were collected from remote surface observing systems at exposed mountaintop locations throughout the state of Colorado, over the summers of 1984-88, as part of the Rocky Mountain Peaks Experiment (ROMPEX). The data show the development of a recurrent circulation system across the Colorado mountain barrier, operating on a diurnal timescale. From the observations, the basic structure of the flow system appears as a daytime inflow toward the highest terrain, and a nocturnal outflow away from it. However, when examined in detail, the flow system exhibits more unusual behavior, especially west of the barrier crest. Here, winds in the early evening are occasionally observed to onset abruptly from an easterly direction, generally counter to the upper-level winds. Observations from ROMPEX for 26 August 1985 are used to provide comparison data for a numerical simulation with the Regional Atmospheric Modeling System (RAMS). This three-dimensional case study experiment is initialized with data from the National Meteorological Center and incorporates two-way interactive grid nesting. From the observed data and case study simulation, four distinct phases of the regional-scale circulation system have been identified. In the development phase, a deep mountain-plains solenoid is generated through terrain heating along the Front Range. This circulation system transforms in the late afternoon transition phase into a westward-propagating density current (WPDC). The third phase, called the 'density-current propagation phase,' occurs as the WPDC moves westward across the mountains, leaving in its wake strong southeasterly flow at the mountaintop level. This current appears to be the cause of the peculiar easterly component winds found in the ROMPEX mountaintop observations along the western slope. In the final late-night adjustment phase, the WPDC dissipates near the western edge of the Colorado mountains and steady southerly flow evolves over the high mountain terrain. This southerly flow is the steady response to the differential heating that develops between the low-lying plains and the intermountain region.

Bossert, James E.↗
NASA NTRS2000

Global Precipitation at One-Degree Daily Resolution From Multi-Satellite Observations

The One-Degree Daily (1DD) technique is described for producing globally complete daily estimates of precipitation on a 1 deg x 1 deg lat/long grid from currently available observational data. Where possible (40 deg N-40 deg S), the Threshold-Matched Precipitation Index (TMPI) provides precipitation estimates in which the 3-hourly infrared brightness temperatures (IR T(sub b)) are thresholded and all "cold" pixels are given a single precipitation rate. This approach is an adaptation of the Geostationary Operational Environmental Satellite (GOES) Precipitation Index (GPI), but for the TMPI the IR Tb threshold and conditional rain rate are set locally by month from Special Sensor Microwave/Imager (SSM/I)-based precipitation frequency and the Global Precipitation Climatology Project (GPCP) satellite-gauge (SG) combined monthly precipitation estimate, respectively. At higher latitudes the 1DD features a rescaled daily Television Infrared Observation Satellite (TIROS) Operational Vertical Sounder (TOVS) precipitation. The frequency of rain days in the TOVS is scaled down to match that in the TMPI at the data boundaries, and the resulting non-zero TOVS values are scaled locally to sum to the SG (which is a globally complete monthly product). The time series of the daily 1DD global images shows good continuity in time and across the data boundaries. Various examples are shown to illustrate uses. Validation for individual grid -box values shows a very high root-mean-square error but, it improves quickly when users perform time/space averaging according to their own requirements.

Huffman, George J.↗
NASA NTRS2005

Simulation of Unsteady Flows Using an Unstructured Navier-Stokes Solver on Moving and Stationary Grids

We apply an unsteady Reynolds-averaged Navier-Stokes (URANS) solver for unstructured grids to unsteady flows on moving and stationary grids. Example problems considered are relevant to active flow control and stability and control. Computational results are presented using the Spalart-Allmaras turbulence model and are compared to experimental data. The effect of grid and time-step refinement are examined.

Biedron, Robert T.↗
NASA NTRS1993

Bgridi - Interactive three-dimensional turbomachinery grid generation system with applications

An interactive, graphics-based grid generation system for 3D turbomachinery geometries has been developed. The system consists of separate modules for geometry modeling and grid generation. The grid generation method generates a series of 2D grids in the blade-to-blade passage to build up the 3D grid. A Poisson equation with forcing functions selected to control orthogonality and spacing on all boundaries is solved to generate the grid. Interactive definition of Bezier curves and surfaces as internal boundaries is used to improve control of grid quality. A multi-block data structure simpifies the creation of structured H-grids about complex turbomachinery geometries. The multi-block strategy facilitates the creation of a grid in the tip flow region, which is an important contributor to losses within the passage. The grid generation system is applied to several complex geometries including a simple radial impeller, a conventional turbine rotor, the SSME LOX turbine rotor with and without a tip flow grid, a multi-passage inducer-impeller, and a tip-flow cascade. In addition, a calculation of the tip-flow cascade flow field is shown.

Shoemaker, J. M.↗
NASA NTRS1999

Data Structure and Parallel Decomposition Considerations on a Fibonacci Grid

The Fibonacci grid, proposed by Swinbank and Purser (see companion abstract), provides attractive properties for global numerical atmospheric prediction by offering an optimally homogeneous, geometrically regular, and approximately isotropic discretization, with only the polar regions requiring special numerical treatment. It is a mathematical idealization, applied to the sphere, of the multi-spiral patterns often found in botanical structures, such as in pine cones and sunflower heads. Computationally, it is natural to organize the domain, into zones, in each of which the same pair, or triple, of "Fibonacci spirals" dominate. But the further subdivision of such zones into "tiles" of a shape and size suitable for distribution to the processors of a massively parallel computer requires very careful consideration if the subsequent spatial computations along the respective spirals, especially those computations (such as compact differencing schemes) that involve recursion, can be implemented in an efficient "load-balanced "manner without requiring excessive amounts of inter-processor communications. In this paper we show how certain "number theoretic" properties of the Fibonacci sequence (whose numbers prescribe the multiplicity of successive spirals) may be exploited in the decomposition of grid zones into tidy arrangements of triangular grid tiles, each tile possessing one side approximately parallel to the constant-latitude zone boundary. We also describe how the spatially recursive processes may be decomposed across such a tiling, and the directionality of the recursions reversed on alternate grid lines, to ensure a very high degree of load balancing throughout the execution of the computations required for one time step of a global model.

Michalakes, John↗
NASA NTRS2005

Chimera Grid Tools

Chimera Grid Tools (CGT) is a software package for performing computational fluid dynamics (CFD) analysis utilizing the Chimera-overset-grid method. For modeling flows with viscosity about geometrically complex bodies in relative motion, the Chimera-overset-grid method is among the most computationally cost-effective methods for obtaining accurate aerodynamic results. CGT contains a large collection of tools for generating overset grids, preparing inputs for computer programs that solve equations of flow on the grids, and post-processing of flow-solution data. The tools in CGT include grid editing tools, surface-grid-generation tools, volume-grid-generation tools, utility scripts, configuration scripts, and tools for post-processing (including generation of animated images of flows and calculating forces and moments exerted on affected bodies). One of the tools, denoted OVERGRID, is a graphical user interface (GUI) that serves to visualize the grids and flow solutions and provides central access to many other tools. The GUI facilitates the generation of grids for a new flow-field configuration. Scripts that follow the grid generation process can then be constructed to mostly automate grid generation for similar configurations. CGT is designed for use in conjunction with a computer-aided-design program that provides the geometry description of the bodies, and a flow-solver program.

Chan, William M.↗
NASA NTRS2012

A Linear Programming Approach to the Development of Contrail Reduction Strategies Satisfying Operationally Feasible Constraints

A class of strategies has been proposed to reduce contrail formation in the United States airspace. A 3D grid based on weather data and the cruising altitude level of aircraft is adjusted to avoid the persistent contrail potential area with the consideration to fuel-efficiency. In this paper, the authors introduce a contrail avoidance strategy on 3D grid by considering additional operationally feasible constraints from an air traffic controller's aspect. First, shifting too many aircraft to the same cruising level will make the miles-in-trail at this level smaller than the safety separation threshold. Furthermore, the high density of aircraft at one cruising level may exceed the workload for the traffic controller. Therefore, in our new model we restrict the number of total aircraft at each level. Second, the aircraft count variation for successive intervals cannot be too drastic since the workload to manage climbing/descending aircraft is much larger than managing cruising aircraft. The contrail reduction is formulated as an integer-programming problem and the problem is shown to have the property of total unimodularity. Solving the corresponding relaxed linear programming with the simplex method provides an optimal and integral solution to the problem. Simulation results are provided to illustrate the methodology.

Wei, Peng↗