Search NASA⌕ Search

SEARCH · Search NASA

Results for “height estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Electronic measurement of microchannel plate pulse height distributions

Microchannel plates are a central component of the x-ray framing cameras used as analog imagers in many plasma experiment diagnostic systems. The microchannel plate serves as an amplifying element, increasing the electronic signal from incident radiation by factors of 10{sup 3}-10{sup 5}, with a broad pulse-height distribution. Seeking to optimize the photon-to-electron conversion efficiency and noise distribution of x-ray cameras, we will characterize the pulse-height distribution of the electron output from a single microchannel plate. Replacing the framing camera's phosphor-coated fiber optic screen with a charge-collection plate and coupling to a low-noise multichannel analyzer, we quantified the distribution in the total charge generated per photon event. The electronically measured pulse height distribution is used to estimate the signal-to-noise ratio of radiographic images from framing cameras.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electrical conductivity in Langmuir-Blodgett films of n-alkyl cyanobiphenyls using current sensing atomic force microscope

We report our studies on the nanoscale electrical conductivity in monolayers of n-alkyl cyanobiphenyl materials deposited on solid surface. Initially, the 8CB, 9CB, and 10CB monolayer films were prepared by the Langmuir technique at air-water interface and characterized by surface manometry and Brewster angle microscopy. The monolayer films were transferred on to solid substrates by the Langmuir-Blodgett (L-B) technique. The 8CB, 9CB, and 10CB monolayer L-B films were deposited on freshly cleaved mica and studied by atomic force microscope (AFM), thereby measuring the film thickness as ∼1.5 nm. The electrical conductivity measurements were carried out on 9CB and 10CB monolayer L-B films deposited onto highly ordered pyrolytic graphite using current sensing AFM. The nanoscale current-voltage (I-V) measurements show a non-linear variation. The nature of the curve indicates electron tunneling to be the mechanism for electrical conduction. Furthermore, analysis of the I-V curve reveals a transition in the electron conduction mechanism from direct tunneling to injection tunneling. From the transition voltage, we have estimated the values of barrier height for 9CB and 10CB to be 0.71 eV and 0.37 eV, respectively. For both 9CB and 10CB, the effective mass of electron was calculated to be 0.021 m{sub e} and 0.065 m{sub e}, respectively. These parameters are important in the design of molecular electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MICROWAVE BURSTS WITH FINE STRUCTURES IN THE DECAY PHASE OF A SOLAR FLARE

This paper presents the microwave bursts with fine structures (FSs) at 1.10-1.34 GHz in the decay phase of a solar flare observed by the Chinese Solar Broadband Radio Spectrometer in Huairou, which show a peak-to-peak correlation with 25-50 keV hard X-ray (HXR) bursts observed by RHESSI. In the microwave spectra, we have identified stripe-like bursts such as lace bursts, fiber structures, zebra patterns (ZPs), and quasi-periodic pulsations. We also have detected short narrowband bursts such as dots, type III, and spikes. The lace bursts had rarely been reported, but in this event they are observed to occur frequently in the decay phase of the flare. The similarity between 25 and 50 keV HXR light curve and microwave time profiles at 1.10-1.34 GHz suggests that these microwave FSs are related to the properties of electron acceleration. The electron velocity inferred from the frequency drift rates in short narrowband bursts is in the range of 0.13c-0.53c and the corresponding energy is about 10-85 keV, which is close to the energy of HXR-emitting electrons. From the Alfven soliton model of fiber structures, the double plasma resonance model of ZPs, and the Bernstein model of the lace bursts, we derived a similar magnetic field strength in the range of 60-70 G. Additionally, the physical conditions of the source regions such as height, width, and velocity are estimated.

79 ASTRONOMY AND ASTROPHYSICS↗

On the Mechanism of Turbulent Shear Flows

As a result of our analysis of some facts of turbulent flows, whose explanation is beyond the scope of existing semiempirical theories, in particular, our estimate of the effective roughness height in pipes with distributed roughness characterized by two or more length scales, we present a version of the theory of turbulent flows in channels with smooth and rough walls with a unified mechanism of the dynamic interaction (friction mechanism) of a turbulent flow with its boundaries—the channel walls or external laminar flow. We have derived the expressions for a generalized law of friction that describe a turbulent flow at all admissible Reynolds numbers from the regime of flow with smooth walls to the regime with a complete manifestation of roughness elements and for sand roughness consistent with Nikuradse’s experimental data. One of the conclusions of the theory is the assertion that the only source of turbulence for turbulent flows in channels and jets are the vortices forming near the walls of channels and at the free boundaries of turbulent jets, and only through these vortices is the kinetic energy from the mean flow converted to the energy of turbulent pulsations. The difference between the mechanisms of the laminar and turbulent flow regimes can be clearly represented by Eq. (24).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Floating Photovoltaic System Cost Benchmark: Q1 2021 Installations on Artificial Water Bodies

In this report, we conduct a bottom-up analysis of the installed costs for FPV systems deployed on artificial water bodies under average site conditions (wind load of about 40 m/s, snow load of 20 psf, water depth of 50 m, water level variation of 10 m, and swell height of 1 m). We estimate an installed system cost premium of $\$0.26$/WDC (25%) for 10-MWDC fixed-tilt FPV systems, compared with ground-mounted, fixed-tilt PV installed over bare ground. Higher structural costs related to the floats and anchoring system are the largest contributors to this premium. Currently, site investigation costs are also higher for FPV because of the additional effort needed to plan and design these more complex installations. Our preliminary sensitivity analysis shows that the installed cost of FPV systems is most sensitive to float costs, wind and snow loading, and module efficiency. FPV deployment is in an early stage, and additional experience, best practice development, and new configurations and technologies could help reduce the costs of FPV systems over time.

14 SOLAR ENERGY↗

KELT-18b: Puffy Planet, Hot Host, Probably Perturbed

We report the discovery of KELT-18b, a transiting hot Jupiter in a 2.87-day orbit around the bright (V = 10.1), hot, F4V star BD+60 1538 (TYC 3865-1173-1). We present follow-up photometry, spectroscopy, and adaptive optics imaging that allow a detailed characterization of the system. Our preferred model fits yield a host stellar temperature of 6670±120 K and a mass of 1.524{sub −0.068}{sup +0.069} M{sub ⊙}, situating it as one of only a handful of known transiting planets with hosts that are as hot, massive, and bright. The planet has a mass of 1.18±0.11 M{sub J}, a radius of 1.570{sub −0.036}{sup +0.042} R{sub J}, and a density of 0.377±0.040 g cm{sup −3}, making it one of the most inflated planets known around a hot star. We argue that KELT-18b’s high temperature and low surface gravity, which yield an estimated ∼600 km atmospheric scale height, combined with its hot, bright host, make it an excellent candidate for observations aimed at atmospheric characterization. We also present evidence for a bound stellar companion at a projected separation of ∼1100 au, and speculate that it may have contributed to the strong misalignment we suspect between KELT-18's spin axis and its planet’s orbital axis. The inferior conjunction time is 2457542.524998 ± 0.000416 (BJD{sub TDB}) and the orbital period is 2.8717510 ± 0.0000029 days. We encourage Rossiter–McLaughlin measurements in the near future to confirm the suspected spin–orbit misalignment of this system.

79 ASTRONOMY AND ASTROPHYSICS↗

Density waves in Saturn's rings

Certain radial brightness variations in the outer Cassini division of Saturn's rings may be spiral density waves driven by Saturn's large moon Iapetus, in which case a value of approximately 16 g/sq cm for the surface density is calculated in the region where the waves are seen. The kinematic viscosity in the same region is approximately 170 sq cm/s and the vertical scale height of the ring is estimated to be a maximum of approximately 40 m.

Cuzzi, J. N.↗

Analysis of a resistance-energy balance method for estimating daily evaporation from wheat plots using one-time-of-day infrared temperature observations

Accurate estimates of evaporation over field-scale or larger areas are needed in hydrologic studies, irrigation scheduling, and meteorology. Remotely sensed surface temperature might be used in a model to calculate evaporation. A resistance-energy balance model, which combines an energy balance equation, the Penman-Monteith (1981) evaporation equation, and van den Honert's (1948) equation for water extraction by plant roots, is analyzed for estimating daily evaporation from wheat using postnoon canopy temperature measurements. Additional data requirements are half-hourly averages of solar radiation, air and dew point temperatures, and wind speed, along with reasonable estimates of canopy emissivity, albedo, height, and leaf area index. Evaporation fluxes were measured in the field by precision weighing lysimeters for well-watered and water-stressed wheat. Errors in computed daily evaporation were generally less than 10 percent, while errors in cumulative evaporation for 10 clear sky days were less than 5 percent for both well-watered and water-stressed wheat. Some results from sensitivity analysis of the model are also given.

Choudhury, B. J.↗

Rainfall index over oceans derived from SSM/I data

Ths Special Sensor Microwave/Imager radiometer on board the DMSP satellite measured microwave radiation at 19.35, 22.235, 37.0, and 85.5 GHz with a swath width of 1400 km, providing an opportunity to study global precipitation distributions. A monthly averaged rainfall index was derived using only the 19.35 GHz data. It covers the + or - 50 deg portion of the world with a 5 deg x 5 deg grid. The brightness temperature histogram is analyzed to derive the rainfall distribution. Estimates of the freezing level heights and the water vapor contents are utilized to understand the rainfall distribution better. Log normal and gamma distribution functions are fitted to the data and the derived monthly rainfall index compares favorably with historical precipitation patterns.

Chang, A. T. C.↗

A proposed microburst nowcasting procedure using single-Doppler radar

Thirty-one microburst-producing storms from northweast Colorado were studied using single and multiple Doppler radar for the purpose of identifying radar signatures that indicated the development of a downdraft capable of producing a microburst. Descending reflectivity cores, increasing radial convergence within cloud, rotation, and reflectivity notches, were found to be microburst precursors, appearing typically 2-6 min prior to initial surface outflow. Three conceptual models have been drawn, based on the 31 events, to summarize the radar signatures of importance in low, moderate, and high-reflectivity microburst-producing storms. A forecaster-computer environment is proposed to allow the forecaster to readily view radar reflectivity and Doppler velocity information in both unprocessed and analyzed form. Use of multiimage radar displays and time-height profiles of quantitative radar estimates of reflectivity and radial shear are suggested to provide an environment where rapid progress can be made in developing techniques to nowcast microbursts.

Roberts, Rita D.↗

The importance of non-quasigeostrophic forcing during the development of a blocking anticyclone

This study examines the impact of non-quasigeostrophic (NQG) processes during the development of a blocking anticyclone (January 21, 1979 over the southern tip of Greenland) and a precursor, upstream intense cyclone (January 18, 1979). Energy quantities and height tendencies determined from quasigeostrophic estimates are compared with the same quantities obtained from more general formulations. GLA FGGE Level III-b analysis on a 4 deg lat by 5 deg long grid was used to obtain energetics results. It is concluded that NQG processes strengthened the intensity of the block and a precursor explosive cyclone and that a portion of this increase resulted from enhanced baroclinic conversion of eddy potential to eddy kinetic energy and reduced barotropic energy conversion from eddy to zonal flow. It is suggested that NQG vorticity advection, instead of moderating wave developments, enhanced the block development, and it is also suggested that QG forcing might not have been adequate to produce the observed block development.

Tsou, Chih-Hua↗

The Io sulfur torus in 1981

Io torus spectrometry obtained in the S II and S III forbidden lines during February-March 1981 indicate that these emissions are correlated in the warm torus, and possess similar scale heights along the magnetic field lines. The observed emission scale heights can be used to estimate the ion temperature parallel to the magnetic field, given the effective ion mass. Attention is also given to simultaneous measurements of the S II forbidden 6731 line profile obtained on one night with a Fabry-Perot scanning spectrophotometer.

Oliversen, Ronald J.↗

On the estimation of climatological Z-R relationships

A statistical framework for climatological Z-R parameter estimation is developed and simulation experiments are conducted to examine sampling properties of the estimators. Both parametric and nonparametric models are considered. For parametric models, it is shown that Z-R parameters can be estimated by maximum likelihood, a procedure with optimal large sample properties. A general nonparametric framework for climatological Z-R estimation is also developed. Nonparametric procedures are attractive because of their flexibility in dealing with certain types of measurement errors common to radar data. Simulation experiments show that even under favorable assumptions on error characteristics of radar and raingages, large datasets are required to obtain accurate Z-R parameter estimates. Another important conclusion is that estimation results are generally quite sensitive to radar and raingage measurement thresholds. For fixed sample size, the simulation results can be used to provide quantitative assessments of the accuracy of Z-R model parameter estimates. These results are particularly useful for error analysis of precipitation products that are derived using climatological Z-R relations. One example is the large-area rainfall estimates derived using the height-area rainfall threshold (HART) technique.

Krajewski, Witold F.↗

Implications of Large Scale Shifts in Tropospheric NO(x) Levels in the Remote Tropical Pacific

A major observation recorded during NASA's western Pacific Exploratory Mission (PEM-West B) was the large shift in tropical NO levels as a function of geographical location. High-altitude NO levels exceeding 100 pptv were observed during portions of tropical flights 5-8, while values almost never exceeded 20 pptv during tropical flights 9 and 10. The geographical regions encompassing these two flight groupings are here labeled "high" and "low" NOx regimes. A comparison of these two regimes, based on back trajectories and chemical tracers, suggests that air parcels in both were strongly influenced by deep convection. The low NO(x) regime appears to have been predominantly impacted by marine convection, whereas the high NO(x) regime shows evidence of having been more influenced by deep convection over a continental land mass. DMSP satellite observations point strongly toward lightning as the major source of NOx in the latter regime. Photochemical ozone formation in the high NOx regime exceeded that for low NO(x) by factors of 2 to 6, whereas O3 destruction in the low NO(x)regime exceeded that for high NOx by factors of up to 3. Taking the tropopause height to be 17 km, estimates of the net photochemical effect on the O3 column revealed that the high NO(x) regime led to a small net production. By contrast, the low NOx regime was shown to destroy O3 at the rate of 3.4 % per day. One proposed mechanism for off-setting this projected large deficit would involve the transport of 03 rich midlatitude air into the tropics. Alternatively, it is suggested that O3 within the tropics may be overall near self-sustaining with respect to photochemical activity. This scenario would require that some tropical regions, unsampled at the time of PEM-B, display significant net column O3 production, leading to an overall balanced budget for the "greater" tropical Pacific basin. Details concerning the chemical nature of such regimes are discussed.

Crawford, J. H.↗

Deep Ocean Warming Assessed from Altimeters, GRACE, 3 In-situ Measurements, and a Non-Boussinesq OGCM

Observational surveys have shown significant oceanic bottom water warming, but they are too spatially and temporally sporadic to quantify the deep ocean contribution to the present-day sea level rise (SLR). In this study, altimetry sea surface height (SSH), Gravity Recovery and Climate Experiment (GRACE) ocean mass, and in situ upper ocean (0-700 m) steric height have been assessed for their seasonal variability and trend maps. It is shown that neither the global mean nor the regional trends of altimetry SLR can be explained by the upper ocean steric height plus the GRACE ocean mass. A non-Boussinesq ocean general circulation model (OGCM), allowing the sea level to rise as a direct response to the heat added into the ocean, is then used to diagnose the deep ocean steric height. Constrained by sea surface temperature data and the top of atmosphere (TOA) radiation measurements, the model reproduces the observed upper ocean heat content well. Combining the modeled deep ocean steric height with observational upper ocean data gives the full depth steric height. Adding a GRACE-estimated mass trend, the data-model combination explains not only the altimetry global mean SLR but also its regional trends fairly well. The deep ocean warming is mostly prevalent in the Atlantic and Indian oceans, and along the Antarctic Circumpolar Current, suggesting a strong relation to the oceanic circulation and dynamics. Its comparison with available bottom water measurements shows reasonably good agreement, indicating that deep ocean warming below 700 m might have contributed 1.1 mm/yr to the global mean SLR or one-third of the altimeter-observed rate of 3.11 +/- 0.6 mm/yr over 1993-2008.

sea level↗

Reply to Comment by Cole-dai Et Al. on "Climatic Impact of the Long-lasting Laki Eruption: Inapplicability of Mass-independent Sulfur Isotope Composition Measurements"

Here we respond to the comments by Cole-Dai et al. [2014] on our article Schmidt et al. [2012]. Specifically, in response to section 2 of their reply, we argued in Schmidt et al. [2012] that based on previously published estimates of the volatile release height during the 1783-1784 C.E. Laki eruption, the lack of a sulfur massindependent fractionation (MIF) anomaly is expected. In other words, no previous study on Laki ever argued that this eruption emitted SO2 into altitudes >13-15 km. In section 2.3, Cole-Dai et al. [2014] argue that the nonzero Δ33S value of their Laki sample 1 may be explained by a short-lived explosive phase at Laki during which volatiles reached the stratosphere. In Schmidt et al. [2012] in section 2, we argued in agreement with Cole-Dai et al. [2014] (section 3.1) that for a MIF anomaly to be preserved, the Laki volatiles would have had to be emitted in >20 km altitude. Our main point is that eruption column heights >20 km are unlikely based on the historical accounts and plume-rise modeling for the Laki eruption [Stothers et al., 1986; Woods, 1993; Thordarson and Self, 2003]. In Schmidt et al. [2012], we argued that to deduce a short-lived climatic impact of the Laki eruption based on the lack of a MIF anomaly and the length of the sulfate deposition in Greenland ice cores may be misleading because the climatic impact will outlast the radiative forcing of the Laki aerosol cloud. Cole-Dai et al. [2014] acknowledge the latter in their reply in section 4.2. We agreewith Cole-Dai et al. [2014] in that themagnitude and length of the climatic impact during the winter of 1783-1784 depends on the altitude of the volatile release during the eruption (sections 2.3 and 4.2). However, even if we assumed that during Laki all sulfur dioxide (SO2) would have been released in the troposphere, then the aerosol cloud would still be present in the upper troposphere during March 1784, as is evident from independent model simulations of this "tropospheric-only" scenario [Stevenson et al., 2003]. We acknowledge that there is uncertainty on the volatile release height for Laki; however, it is worth considering that those climate model simulations that used an injection altitude between 9 km and 13 km for the Laki SO2 [Highwood and Stevenson, 2003; Oman et al., 2006a, 2006b; Schmidt et al., 2012] best match the observed temperature changes during summer of 1783 [Angell and Korshover, 1985; Brázdil et al., 2010; Briffa et al., 1998; D'Arrigo and Jacoby, 1999; Jacoby et al., 1999; Kington, 1988; Manley, 1974; Parker et al., 1992; Thordarson and Self, 2003]. Based on these model simulations, a climatic impact during the winter of 1783-1784, albeit weaker than during the climactic phases of Laki, is expected (and our argument here does not exclude the role of natural variability in contributing to the cold winter of 1783-1784 as discussed in Schmidt et al. [2012]). Therefore, we continue to argue that for high-latitude eruptions such as Laki, the applicability of sulfur isotopic measurements to interpret the climatic relevance has yet to be demonstrated. Itmay transpire that the interpretation of MIF signals for the climate-relevance of an eruption is valid and unambiguous only for short-lived explosive eruptions in the tropics. In terms of the processes producing a MIF anomaly (section 3.3 in Cole-Dai et al. [2014]), the works by Hattori et al. [2013] and Ono et al. [2013] suggest that there are remaining issues not discussed by Cole-Dai et al. [2014], for instance, self-shielding of SO2 due to high column densities typical for eruptions of Pinatubo-scale and greater, and the preservation of the MIF signature in general.

general circulation model↗

Building a Real-Time Flood Prediction Model for Improving Early Warning Systems in Ellicott City, Maryland

As flood events in the United States grow in frequency and intensity, the use of applied remote sensing analyses is increasingly necessary for effective flood monitoring and warning systems. The NASA DEVELOP National Program partnered with the local government of Howard County, Maryland, to investigate the use of machine learning for advanced flood risk detection, and to test the feasibility of integrating this approach into the county’s flood early warning system. To strengthen the efforts of the Howard County Office of Emergency Management (OEM), the project developed a statistical model capable of hindcasting the two severe flash flood events that devastated Ellicott City and transitioned to a ‘Long Short-Term Memory’ based sequence-to-sequence deep learning model with 8-hour forecast capability. The team combined data inputs from public sources including river and precipitation gauges, NASA and NOAA Earth observations, and numerical weather model products using scripts written in the Google Colaboratory Python scripting environment. In addition to designing the deep learning architecture, the team trained and tested the model, and evaluated its performance using Nash-Sutcliffe Efficiency. The final product, the Sequentially Trained Real-time EstimAted Model (STREAM) predicts stage height for the Hudson Branch gauge in Ellicott City using data products available in near real-time, including the High-Resolution Rapid Refresh model’s accumulated precipitation forecasts supplemented by stream gauge data from the OEM and the U.S. Geological Survey. STREAM was incorporated into an online dashboard in a user-friendly interface capable of triggering the alarms that initiate emergency response protocols up to 8 hours in advance of a predicted severe flood event. The project demonstrated the potential for the integration of open data and Earth observations into a flood risk forecasting tool capable of informing near real-time decision making.

NASA DEVELOP↗

Building a Real-Time Predictive Flood Model for Improving Early Warning Systems in Ellicott City, Maryland

As flood events in the United States grow in frequency and intensity, the use of applied remote sensing analyses is increasingly necessary for effective flood monitoring and warning systems. The NASA DEVELOP National Program partnered with the Howard County government in Maryland to investigate the use of machine learning for advanced flood risk detection, and to test the feasibility of integrating this approach into the county’s flood early warning system. To strengthen the efforts of the Howard County Office of Emergency Management (OEM), the project developed a prediction model capable of hindcasting the two severe flash flood events that devastated Ellicott City, and transitioned to an Long Short-Term Memory (LSTM) based sequence-to-sequence deep learning model with 8-hour forecast capability. The team combined data inputs from public sources including river and precipitation gauges, NASA and NOAA Earth observations, and numerical weather model products using scripts written in the Google Colaboratory Python scripting environment. In addition to designing the deep learning architecture, the team trained and tested the model, and evaluated its performance using the Nash-Sutcliffe Efficiency (NSE). The final product, called the Sequentially Trained Real-time EstimAted Model (STREAM), predicts stage height for the Hudson Branch gauge in Ellicott City using data products available in near real-time, including the High-Resolution Rapid Refresh (HRRR) model’s accumulated precipitation forecasts supplemented by stream gauge data from the OEM and the U.S. Geological Survey. STREAM was incorporated into an online dashboard in a user-friendly interface capable of triggering the alarms that initiate the OEM’s emergency response protocols up to 8 hours in advance of a predicted severe flood event. The project demonstrated the potential for the integration of open data and Earth observations into a flood risk forecasting tool capable of informing near real-time decision making.

Ryan Hammock↗