Search NASA⌕ Search

SEARCH · Search NASA

Results for “high modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Degradation of tensile and shear properties of composites exposed to fire or high temperature

The decrease in ultimate tensile strength, shear strength, tensile modulus, and shear modulus of fiber reinforced composites exposed to fire or to high temperature was investigated. A simple model was developed for calculating the mass loss of the material and the thickness of the char layer. The mass loss as well as the degradation in tensile and shear properties of Fiberite T300/1034 and Hercules AS/3501-6 graphite epoxy composites exposed to fire were measured. A correlation between the degradation in properties and the calculated mass loss and the char layer thickness was developed. A technique was proposed for predicting material damage through the use of such correlations.

Pering, G. A.↗

Direct Ink Writing of 3D Zn Structures as High‐Capacity Anodes for Rechargeable Alkaline Batteries

The relationship between structure and performance in alkaline Zn batteries is undeniable, where anode utilization, dendrite formation, shape change, and passivation issues are all addressable through anode morphology. While tailoring 3D hosts can improve the electrode performance, these practices are inherently limited by scaffolds that increase the mass or volume. Herein, a direct write strategy for producing template‐free metallic 3D Zn electrode architectures is discussed. Concentrated inks are customized to build designs with low electrical resistivity (5 × 10 −4 Ω cm), submillimeter sizes (200 μm filaments), and high mechanical stability (Young's modulus of 0.1–0.5 GPa at relative densities of 0.28–0.46). A printed Zn lattice anode versus NiOOH cathode with an alkaline polymer gel electrolyte is then demonstrated. This Zn||NiOOH cell operates for over 650 cycles at high rates of 25 mA cm −2 with an average areal capacity of 11.89 mAh cm −2 , a cumulative capacity of 7.8 Ah cm −2 , and a volumetric capacity of 23.78 mAh cm −3 . A thicker Zn anode achieves an ultrahigh areal capacity of 85.45 mAh cm −2 and a volumetric capacity of 81.45 mAh cm −3 without significant microstructural changes after 50 cycles.

25 ENERGY STORAGE↗

Static Indentation Load Capacity of the Superelastic 60NiTi for Rolling Element Bearings

The nickel-rich, binary nickel-titanium alloys, such as 60NiTi (60Ni-40Ti by wt%), are emerging as viable materials for use in mechanical components like rolling element bearings and gears. 60NiTi is a superelastic material that simultaneously exhibits high hardness and a relatively low elastic modulus (approx.100 GPa). These properties result in the potential to endure extremely high indentation loads such as those encountered in bearings, gears and other mechanical components. In such applications, quantifying the load that results in permanent deformation that can affect component performance and life is important. In this paper, the static load capacity is measured by conducting indentation experiments in which 12.7 mm diameter balls made from the ceramic Si3N4 are pressed into highly polished, hardened 60NiTi flat plates. Hertz stress calculations are used to estimate contact stress. The results show that the 60NiTi surface can withstand an approximately 3400 kN load before significant denting (>0.6 microns deep) occurs. This load capacity is approximately twice that of high performance bearing steels suggesting that the potential exists to make highly resilient bearings and components from such materials.

DellaCorte, Christopher↗

Ultrahigh strength, modulus, and conductivity of graphitic fibers by macromolecular coalescence

Theoretical considerations suggest that the strength of carbon nanotube (CNT) fibers be exceptional; however, their mechanical performance values are much lower than the theoretical values. To achieve macroscopic fibers with ultrahigh performance, we developed a method to form multidimensional nanostructures by coalescence of individual nanotubes. The highly aligned wet-spun fibers of single- or double-walled nanotube bundles were graphitized to induce nanotube collapse and multi-inner walled structures. These advanced nanostructures formed a network of interconnected, close-packed graphitic domains. Their near-perfect alignment and high longitudinal crystallinity that increased the shear strength between CNTs while retaining notable flexibility. The resulting fibers have an exceptional combination of high tensile strength (6.57 GPa), modulus (629 GPa), thermal conductivity (482 W/m·K), and electrical conductivity (2.2 MS/m), thereby overcoming the limits associated with conventional synthetic fibers.

36 MATERIALS SCIENCE↗

Toughened Matrix SiC Fiber Reinforced Composites

First matrix cracking stress is a critical parameter for application of Sic fiber reinforced composites in highly stressed, environmentally demanding applications such as turbine blades. High matrix fracture toughness is a key property that contributes to high composite fracture stress. Silicon nitride offers reduced matrix elastic modulus, lower coefficient of thermal expansion, and potentially high fracture toughness compared to Sic matrices. All of these factors can be used to advantage to increase matrix fracture stress. As a first model system we are pursuing toughened silicon nitride matrix composites reinforced with SCS-9 fibers. Fabrication is by tape casting the matrix plies and tape lay-up with fiber plies followed by hot pressing at 1800 C. Progress toward this end will be reported.

Levine, Stanley R.↗

The cosmological moduli problem and naturalness

Nowadays, the cosmological moduli problem (CMP) comes in three parts: 1. potential violation of Big-Bang nucleosynthesis (BBN) constraints from late decaying moduli fields, 2. the moduli-induced gravitino problem wherein gravitinos are overproduced and their decays violate BBN or dark matter overproduction bounds and 3. the moduli-induced lightest SUSY particle (LSP) overproduction problem. Also, the CMP may be regarded as either a problem or else a solution to scenarios with dark matter over- or under-production. We examine the cosmological moduli problem and its connection to electroweak naturalness. We calculate the various two-body decay widths of a light modulus field into MSSM particles and gravitinos within general supersymmetric models. We include both phase space and mixing effects. We examine cases without and with helicity suppression of modulus decays to gravitinos (cases 1 & 2) and/or gauginos (cases A & B). For case B1, we evaluate regions of gravitino mass m 3/2 vs. modulus mass mΦ parameter space constrained by BBN, by overproduction of gravitinos and by overproduction of neutralino dark matter, along with connections to naturalness. For this case, essentially all of parameter space is excluded unless mΦ ≳ 2.5 × 10 3 TeV with mΦ< 2m 3/2 For a potentially most propitious case B2 with Φ decay to Higgs and matter turned off, then modulus branching fractions to SUSY and to gravitinos become highly suppressed at large m Φ . But since the modulus number density increases faster than the branching fractions decrease, there is still gross overproduction of neutralino dark matter. We also show that in this scenario the thermally produced gravitino problem is fixed by huge entropy dilution, but non-thermal gravitino production from moduli decay remains a huge problem unless it is kinematically suppressed with m Φ < 2m 3/2 . In a pedagogical appendix, we present detailed calculations of modulus field two-body decay widths.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-pressure high-temperature synthesis and thermal equation of state of high-entropy transition metal boride

High-entropy transition metal boride (Hf 0.2 Ti 0.2 Zr 0.2 Ta 0.2 Mo 0.2 )B 2 sample was synthesized under high-pressure and high-temperature starting from ball-milled oxide precursors (HfO 2 , TiO 2 , ZrO 2 , Ta 2 O 5 , MoO 3 ) mixed with graphite and boron-carbide. Experiments were conducted in a large-volume Paris Edinburgh press combined with an in-situ Energy Dispersive X-ray Diffraction. The hexagonal AlB 2 phase with an ambient pressure volume V 0 = 27.93 ± 0.03 Å 3 was synthesized at a pressure of 0.9 GPa and temperatures above 1373K. High-pressure high-temperature studies on the synthesized high-entropy transition metal boride sample were performed to 7.6 GPa and 1873 K. The thermal equation of state fitted to the experimental data resulted in an ambient pressure bulk-modulus K 0 = 344 ± 39 GPa, dK/dT = –0.108 ± 0.027 GPa/K, and a temperature dependent volumetric thermal expansion coefficient α = α 0 + α 1 T + α 2 T –2 . The thermal stability combined with a high bulk-modulus establishes this high-entropy transition metal boride as an ultrahard high-temperature ceramic material.

36 MATERIALS SCIENCE↗

Tensile and tribological properties of high-crystallinity radiation crosslinked UHMWPE

Osteolysis due to particulate wear debris associated with ultrahigh molecular weight polyethylene (UHMWPE) components of total joint replacement prostheses has been a major factor determining their in vivo lifetime. In recent years, radiation crosslinking has been employed to decrease wear rates in PE components, especially in acetabular cups of total hip replacement prostheses. A drawback of radiation crosslinking is that it leads to a crosslinked PE (or XPE) with lower mechanical properties compared with uncrosslinked PE. In contrast, high-crystallinity PEs are known to have several mechanical properties higher than conventional PE. In this study, we hypothesized that increasing the crystallinity of radiation crosslinked and remelted XPE would result in an increase in tensile properties without compromising wear resistance. High-pressure crystallization was performed on PE and XPE and analyzed for the resulting morphological alterations using differential scanning calorimeter, low voltage scanning electron microscopy, and ultrasmall angle X-ray scattering. Uniaxial tensile tests showed that high-pressure crystallization increased the tensile modulus and yield stress in both PE and XPE, decreased the ultimate strain and ultimate stress in PE but had no significant effect on ultimate strain or ultimate stress in XPE. Multidirectional wear tests demonstrated that high-pressure crystallization decreased the wear resistance of PE but had no effect on the wear resistance of XPE. In conclusion, this study shows that high-pressure crystallization can be effectively used to increase the crystallinity and modulus of XPE without compromising its superior wear resistance compared with PE.

59 BASIC BIOLOGICAL SCIENCES↗

The Effect of Indenter Ball Radius on the Static Load Capacity of the Superelastic 60NiTi for Rolling Element Bearings

Static load capacity is a critical design parameter for rolling element bearings used in space mechanisms because of the potential for Brinell (surface dent) damage due to shock and vibration loading events during rocket launch. Brinell damage to bearing raceways can lead to torque variations (noise) and reduced bearing life. The growing use of ceramic rolling elements with high stiffness in hybrid bearings exacerbates the situation. A new family of hard yet resilient materials based upon nickel-titanium is emerging to address such bearing challenges. 60NiTi is a superelastic material that simultaneously exhibits high hardness and a relatively low elastic modulus (~100GPa) and has been shown to endure higher indentation loads than conventional and high performance steel. Indentation load capacity has been reported for relatively large (12.7mm diameter) ceramic (Si3N4) indenter balls pressed against flat plates of 60NiTi. In order to develop damage load threshold criteria applicable to a wide range of bearing designs and sizes, the effects of indenter ball radius and the accuracy of interpolation of the Hertz contact stress relations for 60NiTi must be ascertained. In this paper, results of indentation tests involving ceramic balls ranging from 6.4 to 12.7mm in diameter and highly polished 60NiTi flat plates are presented. When the resulting dent depth data for all the indenter ball sizes are normalized using the Hertz equations, the data (dent depth vs. stress) are comparable. Thus when designing bearings made from 60NiTi, the Hertz stress relations can be applied with relative confidence over a range of rolling element sizes and internal geometries.

bearings↗

Experimental evaluation of shear modulus scaling of dynamic strength at extreme pressures

Recent progress in the development of dynamic strength experimental platforms is allowing for unprecedented insight into the assumptions used to construct constitutive models operating in extreme conditions. In this work, we make a quantitative assessment of how tantalum strength scales with its shear modulus to pressures of hundreds of gigapascals through a cross-platform examination of three dynamic strength experiments. Specifically, we make use of Split–Hopkinson pressure bar and Richtmyer–Meshkov instability experiments to assess the low-pressure strain and strain rate dependence. Concurrent examination of magnetically driven ramp-release experiments up to pressures of 350GPa allows us to examine the pressure dependence. In this work, using a modern description of the shear modulus, validated against both ab initio theory and experimental measurements, we then assess how the experimentally measured pressure dependence scales with shear modulus. Furthermore, we find that the common assumption of scaling strength linearly with the shear modulus is too soft at high pressures and offer discussion as to how descriptions of slip mediated plasticity could result in an alternative scaling that is consistent with the data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First evidence of P2{sub 1}/n to P2{sub 1}/c structural transformation in pyroxene-type LiAlGe{sub 2}O{sub 6} under high-pressure conditions

The high-pressure behavior of the pyroxene-type compound LiAlGe{sub 2}O{sub 6}, the unique representative of a P2{sub 1}/n-pyroxene, was investigated by in-situ X-ray diffraction and Raman spectroscopy on single-crystal samples hydrostatically pressurized in a diamond-anvil cell. The structure was found to undergo a first-order phase transition on compression, with a critical transition at 5.23±0.02 GPa. Together with a strong volume discontinuity of −ΔV/V{sub 0}=−4.1% the transition shows a remarkable hysteresis loop over at least 0.70 GPa pressure interval. The bulk modulus of the low- and high-pressure polymorphs corresponds to K{sub 0}=114(1) and 123(2) GPa, respectively, as described by a 2{sup nd} order Birch–Murnaghan equation of state. Based on the systematic extinctions the transition was identified as a P2{sub 1}/n-to-P2{sub 1}/c transformation. The mechanism of structural transformation was identified to be controlled by the stereochemistry of the Li atoms at the M2 site, which changes its coordination number from 5 to 6. The formation of new Li–O bonds involves the co-operative folding of Ge{sub 2}O{sub 6}-chains, which explains the anisotropy of axial elasticities and the spontaneous strain across the transformation. Simultaneously the distortion correction of AlO{sub 6} units associated with the transition further explains the preference of the P2{sub 1}/c structure under pressure. - Graphical abstract: Detail of the crystal structures of LP-LAG at 3.48 GPa (left) and HP-LAG at 4.51 GPa (right). Li on M2 are green; AlO{sub 6} octahedra (Al at M1) are orange; tetrahedra sites in LP-LAG: T1 (yellow) and T2 (blue); tetrahedra sites in HP-LAG: A-chains (yellow), B-chains (blue). - Highlights: • A new high-pressure phase transition P2{sub 1}/n–P2{sub 1}/c was found for LaAlGe{sub 2}O{sub 6}. • The transition was also followed by micro-Raman spectroscopy. • The high-pressure polymorph shows a higher bulk modulus. • The structural evolution of the two symmetries was determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion conduction and relaxation in PEO-LiTFSI-Al{sub 2}O{sub 3} polymer nanocomposite electrolytes

Ion conduction and relaxation in PEO-LiTFSI-Al{sub 2}O{sub 3} polymer nanocomposite electrolytes have been studied for different concentrations of Al{sub 2}O{sub 3} nanoparticles. X-ray diffraction and differential scanning calorimetric studies show that the maximum amorphous phase of PEO is observed for PEO-LiTFSI embedded with 5 wt. % Al{sub 2}O{sub 3}. The maximum ionic conductivity ∼3.3 × 10{sup −4} S cm{sup −1} has been obtained for this composition. The transmission electron microscopic image shows a distribution of Al{sub 2}O{sub 3} nanoparticles in all compositions with size of <50 nm. The temperature dependence of the ionic conductivity follows Vogel-Tamman-Fulcher nature, indicating a strong coupling between ionic and polymer chain segmental motions. The scaling of the ac conductivity implies that relaxation dynamics follows a common mechanism for different temperatures and Al{sub 2}O{sub 3} concentrations. The imaginary modulus spectra are asymmetric and skewed toward the high frequency sides of the maxima and analyzed using Havriliak-Negami formalism. The temperature dependence of the relaxation time obtained from modulus spectra also exhibits Vogel-Tamman-Fulcher nature. The values of the stretched exponent obtained from Kohlrausch-Williams-Watts fit to the modulus data are fairly low, suggesting highly non-exponential relaxation for all concentrations of Al{sub 2}O{sub 3} in these electrolytes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polyimides From a-BPDA and Aromatic Diamines

Polymers having low color and a favorable combination of other properties, including high glass-transition temperature (Tg) and high mechanical properties (strength, tensile modulus, and toughness) will find use in a variety of terrestrial and space applications. Some of the space applications will be in thin films used as membranes on antennas, solar concentrators, coatings on second-surface mirrors, solar sails, sunshades, thermal and optical coatings, and multi-layer thermal insulation blankets. Depending upon the application, the film will be required to exhibit a unique combination of such properties as resistance to degradation by ultraviolet light, visible light, and electrons; low color and/or low solar absorptivity; resistance to tearing and/or wrinkling during packaging and deployment; and high mechanical properties (e.g. high strength, stiffness, and toughness).

Hergenrother, Paul M.↗

Machine learning elastic constants of multi-component alloys

The present manuscript explores application of machine learning methods for determining elastic constants and other derived mechanical properties of multi-component alloys. Here, a number of machine learning models, including linear regression, neural network and random forest based models, are trained and tested on a dataset of binary alloys generated using density functional theory (DFT) calculations and spanning over a large number of elemental species in the periodic table. Starting with a wide range of simple and easily accessible compositionally-averaged elemental features, a correlation-based feature selection strategy was used to systematically down-select a set of most relevant features towards the prediction of the elasticity tensor components. The true predictive performance and the associated uncertainties of the models were established by testing on unseen data and bootstrapping, respectively. A single and pair-wise feature partial dependence analysis was performed to visualize the average property trends in the multi-dimensional feature space in order to further understand the achieved predictive performance. The utility of the trained model is further demonstrated by obtaining sufficiently accurate yet highly efficient approximations for bulk modulus, Young’s modulus, shear modulus and Poisson’s ratio for alloys beyond the binary space (i.e., two-component alloys) on which the model was originally trained. More importantly, we test and validate the predictive performance of the developed model directly against the experimentally measured elastic constants of technologically relevant multi-component alloys (such as, Ni- and Ti-based alloys). Finally, utility of such a data-enabled route is demonstrated by predicting the possible range of various elastic properties for vast composition space available within the five component Ni-Cr-Fe-Mo-W alloy system in a high-throughput manner.

36 MATERIALS SCIENCE↗

Experimental Assessment of Elastic Modulus vs. Relative Density for Stretch- and Bend-Dominated Lattices

This project was designed to study the possibility of using structural properties of lattices to replicate the material properties of certain hard to manufacture designs and use topology optimization to determine the lattice type and density required to mimic these properties. The integration of additively manufactured lattice structures with topology optimization highlights the need for well characterized mechanical properties and uncertainty analyses to insure these optimized structures respond as predicted. Stereolithographically printed octet and rhombic dodecahedron lattices were manufactured at 10%, 25% and 65% density by volume. As a separate task, yet integrated into this work, finite element analysis (FEA) was used to predict the printed lattice’s mechanical properties, which were then compared to our experimental results. After comparing FEA and experimentallymeasured elastic moduli, it was determined that the FEA provides highly reliable predictions for the modulus of these printed lattice structures. These lattices also exhibited greater tensile stiffness than that of the solid material demonstrating the flexibility that lattices provide to designing parts with designer structural properties. The accurate printing and reliable modeling of these lattices will enable topology optimization of complex parts from well-characterized rhombic dodecahedron and octet lattice structures of varying densities.

36 MATERIALS SCIENCE↗

Highly Deformable Rigid Glassy Conjugated Polymeric Thin Films

Wearable devices benefit from the use of stretchable conjugated polymers (CPs). Traditionally, the design of stretchable CPs is based on the assumption that a low elastic modulus (E) is crucial for achieving high stretchability. However, this research, which analyzes the mechanical properties of 65 CP thin films, challenges this notion. It is discovered that softness alone does not determine stretchability; rather, it is the degree of entanglement that is critical. This means that rigid CPs can also exhibit high stretchability, contradicting conventional wisdom. To inverstigate further, the mechanical behavior, electrical properties, and deformation mechanism of two model CPs: a glassy poly(3-butylthiophene-2,5-diyl) (P3BT) with an E of 2.2 GPa and a viscoelastic poly(3-octylthiophene-2,5-diyl) (P3OT) with an E of 86 MPa, are studied. Ex situ transmission X-ray scattering and polarized UV–vis spectroscopy revealed that only the initial strain (i.e., <20%) exhibits different chain alignment mechanisms between two polymers, while both rigid and soft P3ATs showed similarly behavior at larger strains. In conclusion, by challenging the conventional design metric of low E for high stretchability and highlighting the importance of entanglement, it is hoped to broaden the range of CPs available for use in wearable devices.

36 MATERIALS SCIENCE↗

Synthesis and characterization of biobased copolyesters based on pentanediol: (2) Poly(pentylene adipate–co–terephthalate)

Traditionally, most flexible food packaging is made of linear low-density polyethylene (LLDPE) which cannot easily be recycled, nor will it degrade in a reasonable timescale. In this work, a biobased biodegradable polyester alternative was investigated as a possible replacement for LLDPE. High molecular weight poly (pentylene adipate-co-terephthalate) with a 40/60 adipic acid/terephthalic acid mole ratio was synthesized using direct esterification and polycondensation. Glycerol and hexane-1,2,5,6-tetrol were added as branching agents to better match the structure of the LLDPE which in turn might help the ability of these materials in film-blowing. Thermal, mechanical, and rheological properties of the copolyesters were thoroughly investigated. All copolyesters had a weight-average molecular weight of over 140,000 g/mol, which is necessary for proper rheology, and were thermally stable up to 350°C. Here, the addition of branching agents led to a slight decrease in crystallinity, d-spacing, melting temperature, enthalpy of melting, stress at break, and elongation at break. However, an increase in Young's modulus and complex viscosity at high frequency were observed compared to PPeAT60 without branching agent added. Although the improved crystallinity and mechanical properties of the copolyesters made them viable for film-blowing, the slow crystallization rate creates a major challenge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supramolecular Arene‐Perfluoroarene Assembly Enhances Photoiniferter Polymerization Kinetics

Ultra-high-molecular-weight (UHMW, >106 Da) polymers have unique thermomechanical properties due to their large number of physical entanglements. Producing UHMW styrenic polymers is challenging because of their prohibitively slow homopolymerization kinetics. In this report, we show that alternating photoiniferter copolymerization between methoxy-functionalized styrenic monomers and pentafluorostyrene can circumvent this limitation under conditions where arene–perfluoroarene (AP) interactions contribute to favorable monomer association and accelerate copolymerization. Increasing methoxy substitution on the styrene arene ring leads to pronounced rate enhancements that correlate with electronic complementarity between the styrenic comonomers. Density functional theory calculations reveal increasingly favorable AP interaction energies across the series, consistent with monomer association contributing to faster propagation. The result is up to 2000% enhancement in propagation rate in copolymerizations compared to styrene homopolymerization. Despite these rate enhancements, the resulting materials retain broadly similar glass-transition temperatures and network-like thermomechanical behavior, with only modest softening across the series. Here, we then leverage the approach to produce UHMW trialkoxystyrene copolymers bearing sterically encumbered pendants, which are ultrasoft (Young's modulus of 8 kPa) and highly extensible (560%). These results establish that designed supramolecular association between styrenics is a powerful tool for controlling reactivity in radical polymerization and generating otherwise difficult-to-obtain materials.

Marquez, Joshua D. [University of Florida, Gainesv↗