Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrogenation process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Wind enhanced planetary escape - Collisional modifications

Effects of collisions and finite winds characteristic of a highly perturbed atmosphere on the thermal escape of terrestrial hydrogen and helium are investigated using a Monte Carlo approach. The limiting cases of vertical and horizontal winds are considered, and the relaxation layer between the collisionless exosphere and the collision-dominated thermosphere is modeled as a plane-parallel slab of given column density, depth, and atmospheric density. For both gases, the upwardly injected flux at the base of the relaxation layer is compared with the returning downward flux distribution at the same location; the technique is also applied to the atmosphere of Titan. The results show that inclusion of collisions in the escape model for terrestrial hydrogen with winds effectively throttles the escape process, that collisional throttling is negligible for helium when the exobase temperature is at least 5000 K, and that the escape of a planetary-atmosphere constituent depends on the ratio of its gravitational and kinetic energies as well as on the ratio of its mass to that of the background gas.

Curtis, S. A.↗

Stability of the equilibrium for atomic H in solid H2

The previously reported phenomenological rate process theory for the storage of atomic hydrogen free radicals in a tritium-impregnated crystalline molecular hydrogen solid is used to determine the dynamical stability of the constant uniform equilibrium solution. The analysis indicates that the equilibrium is unstable (thus, unattainable experimentally) for storage temperatures in a certain range (specifically between 0.134 and 0.80 K for 0.03% tritium by weight, and between 0.165 and 0.80 K for 1.20% tritium by weight), while being absolutely stable with respect to arbitrary small-amplitude perturbations for all storage temperatures below and above this range. The theory also predicts the maximum size for a stable H/H2 sample with an appreciable concentration of trapped H and a net excess rate of volumetric heating due to the tritium decay.

Rosen, G.↗

Low-temperature condensates in comets

Recent observational data on the volatile fraction of comets are confronted with a model based on the fractional condensation, in the 80-100 K range, of a higher-temperature equilibrium obtained from a solar mixture, more or less depleted in oxygen and in hydrogen. It is possible to almost duplicate the observational data, only by assuming that the solar ratio of C/O is at least as large as 0.66 and that the hydrogen was drastically depleted by an unknown process in the primitive solar nebula. Although none of these two assumptions is at variance with present knowledge, the latter is sufficiently exotic to propose a simpler explanation, namely that comets could be made of interstellar grains relatively unprocessed by heat.

Delsemme, A. H.↗

Meridional circulation and CNO anomalies in red giant stars

The possibility is investigated that meridional circulation driven by internal rotation might lead to the mixing of CNO-processed material from the vicinity of the hydrogen shell into the envelope of a red giant star. This theory of meridional mixing is found to be generally consistent with available data and to be capable of explaining a number of observational results without invoking a radical departure from the standard physics of stellar interiors. It is suggested that meridional circulation must be a normal characteristic of a rotating star and that meridional mixing provides a reasonable framework for understanding many of the CNO anomalies exhibited by weak-G-band and CN-strong stars as well as the low C-12/C-13 ratios measured among field red giants.

Sweigart, A. V.↗

'Bottleneck' calculation of ion-electron recombination coefficients for lithium-like ions

The ion-electron recombination coefficients for the lithium-like ions C IV, O VI, Ne VIII, Si XII and Ar XVI are computed by the bottleneck method of Byron et al. (1962). In this method, the minimum rate of transitions down the ladder of energy level is taken as the limiting recombination rate, and the particular energy level corresponding to the minimum transition rate is found. The partial collisional radiative recombination coefficient is obtained in terms of the equilibrium population, the rate of collisional de-excitation, the mean radiative transition probability from the bottleneck level and the total transition probability from a level above the bottleneck level to all levels below it. The full collisional-radiative recombination is then obtained by the addition of the values of the radiative recombination coefficient and the three-body recombination coefficient to the ground level. Results of the calculation are shown to be in good agreement with those of Drawin and Emard (1975) for the case of hydrogen. It is also noted that the process of dielectronic recombination, which is not accounted for here, may be significant at lower densities.

Kastner, S. O.↗

Low-temperature Positron Annihilation

For a satisfactory understanding of astrophysical annihilation radiation, especially that observed from the galactic center direction, the interaction of positrons with the ambient medium must be carefully investigated. Although hot, ionized regions may be important sources of annihilation radiation, the simpler processes occurring in low-temperature neutral hydrogen gas are mainly addressed. The goal is to set limits on conditions in the annihilation region by using the predictions of atomic theory compared with the observed gamma-ray line width, continuum strength and time dependence.

Drachman, R. J.↗

Response of earth's atmosphere to increases in solar flux and implications for loss of water from Venus

A one-dimensional radiative-convective model is used to compute temperature and water vapor profiles as functions of solar flux for an earthlike atmosphere. The troposphere is assumed to be fully saturated, with a moist adiabatic lapse rate, and changes in cloudiness are neglected. Predicted surface temperatures increase monotonically from -1 to 111 C as the solar flux is increased from 0.81 to 1.45 times its present value. The results imply that the surface temperature of a primitive water-rich Venus should have been at least 80-100 C and may have been much higher. Water vapor should have been a major atmospheric constituent at all altitudes, leading to the rapid hydrodynamic escape of hydrogen. The oxygen left behind by this process was presumably consumed by reactions with reduced minerals in the crust.

Kasting, J. F.↗

Process Research on Polycrystalline Silicon Material (PROPSM)

Results of hydrogen-passivated polycrysalline silicon solar cell research are summarized. The short-circuit current of solar cells fabricated from large-grain cast polycrystalline silicon is nearly equivalent to that of single-crystal cells, which indicates long bulk minority-carrier diffusion length. Treatments with molecular hydrogen showed no effect on large-grain cast polycrystalline silicon solar cells.

Culik, J. S.↗

Response of Earth's Atmosphere to Increases in Solar Flux and Implications for Loss of Water from Venus

A one dimensional radiative convective model is used to compute temperature and water vapor profiles as functions of solar flux for earthlike atmosphere. The troposphere is assumed to be fully saturated with a moist adiabatic lapse rate, and changes in cloudiness are neglected. Predicted surface temperatures increase monotonically from -1 to 111 C as the solar flux is increased from 0.81 to 1.45 times its present value. The results imply that the surface temperature of a primitive water rich Venus should have been at least 80-100 C and may have been much higher, water vapor should have been a major atmospheric constituent at all altitudes, leading to the rapid hydrodynamic escape of hydrogen. The oxygen left behind by this process was presumably consumed by reactions with reduced minerals in the crust.

Kasting, J. F.↗

Low-temperature positron annihilation

For a satisfactory understanding of astrophysical annihilation radiation, especially that observed from the Galactic center direction, the interaction of positrons with the ambient medium must be carefully investigated. Although hot, ionized regions may be important sources of annihilation radiation, the simpler processes occurring in low-temperature neutral hydrogen gas are mainly addressed. The goal is to set limits on conditions in the annihilation region by using the predictions of atomic theory compared with the observed gamma-ray line width, continuum strength and time dependence.

Drachman, R. J.↗

Effects of test facility contaminants on supersonic hydrogen-air diffusion flames

Results are presented from an analytical assessment of the effects of NO and H2O in air on the ignition and reaction of hydrogen. Three flow models of the burning process were used, each including a 32 reaction chemistry mechanism. These models were a plug flow reactor to determine ignition and reaction times; a well-stirred reactor to assess flame stability or blow-off; and a parabolic Navier-Stokes code to examine the diffusion flame combustion. The diffusion flame was computed for a cold supersonic H2 jet coaxial with a supersonic air stream at a static temperature of 1100 K and a pressure of 1 atmosphere.

Rogers, R. Clayton↗

Effects of test facility contaminants on supersonic hydrogen-air diffusion flames

Results are presented from an analytical assessment of the effects of NO and H2O in air on the ignition and reaction of hydrogen. Three flow models of the burning process were used, each including a 32 reaction chemistry mechanism. These models were a plug flow reactor to determine ignition and reaction times; a well-stirred reactor to assess flame stability or blow-off, and a parabolic Navier Stokes code to examine the diffusion flame combustion. The diffusion flame was computed for a cold supersonic H2 jet coaxial with a supersonic air stream at a static temperature of 1100 K and a pressure of 1 atmosphere.

Rogers, R. Clayton↗

The modeling of gas phase permeation through iron and nickel membranes

The gas phase permeation of hydrogen through metal membranes encompasses many kinetic processes. This paper reviews a permeation model which incorporates second order gas-surface reaction kinetics with simple bulk diffusion. The model is used to investigate the effect of this particular surface reaction of steady-state permeation. The dependence of the steady-state permeation flux on temperature, pressure, and thickness of the membrane has been calculated. The model predicts that the bulk controlled steady-state flux will change to a surface limited steady-state flux as either the temperature or thickness of the membrane is reduced. Finally, using independently derived parameters, the model is compared with permeation measurements on iron and nickel membranes.

Kuhn, David K.↗

Numerical study of shock-wave/boundary layer interactions in premixed hydrogen-air hypersonic flows

A computational study of shock wave/boundary layer interactions involving premixed combustible gases, and the resulting combustion processes is presented. The analysis is carried out using a new fully implicit, total variation diminishing (TVD) code developed for solving the fully coupled Reynolds-averaged Navier-Stokes equations and species continuity equations in an efficient manner. To accelerate the convergence of the basic iterative procedure, this code is combined with vector extrapolation methods. The chemical nonequilibrium processes are simulated by means of a finite-rate chemistry model for hydrogen-air combustion. Several validation test cases are presented and the results compared with experimental data or with other computational results. The code is then applied to study shock wave/boundary layer interactions in a ram accelerator configuration. Results indicate a new combustion mechanism in which a shock wave induces combustion in the boundary layer, which then propagates outwards and downstream. At higher Mach numbers, spontaneous ignition in part of the boundary layer is observed, which eventually extends along the entire boundary layer at still higher values of the Mach number.

Yungster, Shaye↗

Design of a lunar oxygen production plant

To achieve permanent human presence and activity on the moon, oxygen is required for both life support and propulsion. Lunar oxygen production using resources existing on the moon will reduce or eliminate the need to transport liquid oxygen from earth. In addition, the co-products of oxygen production will provide metals, structural ceramics, and other volatile compounds. This will enable development of even greater self-sufficiency as the lunar outpost evolves. Ilmenite is the most abundant metal-oxide mineral in the lunar regolith. A process involving the reaction of ilmenite with hydrogen at 1000 C to produce water, followed by the electrolysis of this water to provide oxygen and recycle the hydrogen has been explored. The objective of this 1990 Summer Faculty Project was to design a lunar oxygen-production plant to provide 5 metric tons of liquid oxygen per year from lunar soil. The results of this study describe the size and mass of the equipment, the power needs, feedstock quantity and the engineering details of the plant.

Radhakrishnan, Ramalingam↗

Electrolytic production of oxygen from lunar resources

Oxygen is a valuable commodity in space. Substantial savings have been projected for future missions if oxygen could be produced on the moon from local resources. Some of the most promising approaches to extract oxygen from lunar resources involve electrochemical oxygen generation. In a straight-forward concept called "magma electrolysis", suitable oxides (silicates) are molten at 1300-1500 °C and the melt electrolyzed. Residual melt can be discarded after partial electrolysis. Alternatively, lunar soil may be dissolved in a molten salt and electrolyzed. In this approach, temperatures are lower and melt conductances higher, but electrolyte constituents need to be preserved. Both possibilities are being studied in the laboratory. In a different approach, ilmenite is reduced by hydrogen and the resulting water electrolyzed (Carbotek Process TM). Although know-how from terrestrial technology can be applied, the process task is unconventional and requires many innovative solutions. Time and effort needed for successful development should not be underestimated.

Rudolf Keller↗

Numerical study of shock-wave/boundary layer interactions in premixed hydrogen-air hypersonic flows

A computational study of shock wave/boundary layer interactions involving premixed combustible gases, and the resulting combustion processes is presented. The analysis is carried out using a new fully implicit, total variation diminishing (TVD) code developed for solving the fully coupled Reynolds-averaged Navier-Stokes equations and species continuity equations in an efficient manner. To accelerate the convergence of the basic iterative procedure, this code is combined with vector extrapolation methods. The chemical nonequilibrium processes are simulated by means of a finite-rate chemistry model for hydrogen-air combustion. Several validation test cases are presented and the results compared with experimental data or with other computational results. The code is then applied to study shock wave/boundary layer interactions in a ram accelerator configuration. Results indicate a new combustion mechanism in which a shock wave induces combustion in the boundary layer, which then propagates outwards and downstream. At higher Mach numbers, spontaneous ignition in part of the boundary layer is observed, which eventually extends along the entire boundary layer at still higher values of the Mach number.

Yungster, Shaye↗