Search NASA⌕ Search

SEARCH · Search NASA

Results for “interrupt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Estimates of the maximum time required to originate life

Fossils of the oldest microorganisms exist in 3.5 billion year old rocks and there is indirect evidence that life may have existed 3.8 billion years ago (3.8 Ga). Impacts able to destroy life or interrupt prebiotic chemistry may have occurred after 3.5 Ga. If large impactors vaporized the oceans, sterilized the planets, and interfered with the origination of life, life must have originated in the time interval between these impacts which increased with geologic time. Therefore, the maximum time required for the origination of life is the time that occurred between sterilizing impacts just before 3.8 Ga or 3.5 Ga, depending upon when life first appeared on earth. If life first originated 3.5 Ga, and impacts with kinetic energies between 2 x 10 the the 34th and 2 x 10 to the 35th were able to vaporize the oceans, using the most probable impact flux, it is found that the maximum time required to originate life would have been 67 to 133 million years (My). If life originated 3.8 Ga, the maximum time to originate life was 2.5 to 11 My. Using a more conservative estimate for the flux of impacting objects before 3.8 Ga, a maximum time of 25 My was found for the same range of impactor kinetic energies. The impact model suggests that it is possible that life may have originated more than once.

Oberbeck, Verne R.↗
NASA NTRS1990

On the possibility of life on early Mars

Prebiotic reactants, liquid water, and temperatures low enough for organic compounds to be stable are requirements for the origination of life as we know it. Prebiotic reactants and sufficiently low temperatures were present on Mars before liquid water vanished. Early in this time period, however, large planetesimal impacts may have periodically sterilized Mars, pyrolyzed organic compounds, and interrupted chemical origination of life. However, the calculated time interval between such impacts on Mars was larger just before liquid water vanished 3.8 Gyr (billion years) ago than it was on earth just before life originated. Therefore, there should have been sufficient time for life to originate on Mars. Ideal sites to search for microfossils are in the heavily cratered terrain of Upper Noachian age. Craters and channels in this terrain may have been the sites of ancient lakes and streams that could have provided habitats for the first microorganisms.

Oberbeck, V. R.↗
NASA NTRS1989

Hubble Space Telescope six-battery nickel-cadmium mission simulation test

A simulation test of the six-battery nickel-cadmium mission to determine battery life and electrical power system (EPS) performance characteristics for the Hubble Space Telescope (HST) program, is described. The basic HST power system requirements are to provide power generation, energy storage, and EPS control and distribution for 2.5 years with the nickel-cadmium (NiCd) batteries at an end of life solar array of 2 years. Mission simulation life testing begain in April of 1986, and the batteries have completed their 2.5 year mission requirement. Conditions as close as practical to the actual predicted mission profiles were used. These included solar array degradation, load variations, beta angle changes, temperature changes (with excursions to 10 C), battery reconditioning, safemode simulations, and off-normal roll activities. Discounting system cycling interruptions caused by hardware, software, human error, and periodic updates and revisions, the HST EPS breadboard hardware operated continuously for 30 months and demonstrated the power system's ability to meet the HST requirement.

Jackson, Lorna G.↗
NASA NTRS1990

Chaotic rhythms of a dripping faucet

An experiment was conducted which showed that a leaky faucet can offer valuable insights on predicting fluid flow. In this experiment, a flow control and drop detector were connected to the printer port of an IBM PC, which computed and saved the time intervals using a program for droptime compiled with Turbo C. It is noted that the time intervals change from periodic to doubly periodic as the flow rate is increased and then to various forms of chaos, interrupted by windows of periodicity. A number of two- and three-dimensional plots are displayed and discussed. Attention is focused on one of the simpler plots which is approximately parabolic, where each successive time interval is a quadratic function of the preceding interval, with a steepness which depends upon the flow rate. It is shown that a single past analog can predict a dripping faucet with reasonable accuracy 7-10 drops ahead. While such methods are more difficult to apply in higher-dimensional systems, this experiment aids in understanding how fluid flow may be predicted even under conditions of unstable flows caused by increase in velocity.

Cahalan, Robert F.↗
NASA NTRS1990

Mechanisms of nocturnal exchange between the rain forest and the atmosphere

A number of events that lead to nocturnal turbulent mixing between the Amazon rain forest and the atmosphere were observed. Two mechanisms that weaken the stable nocturnal thermal inversion at canopy top are identified with nocturnal release of carbon dioxide and concurrent heat flux into and moisture flux out of the Amazon forest canopy. In the first mechanism, abrupt onset of cloudiness interrupts nocturnal radiative cooling, leading to a period with lowered Richardson number and enhanced heat, moisture, and carbon dioxide fluxes. Significant exchange between the forest canopy and the atmosphere can also occur even on totally clear nights. On these nights, occasional nocturnal increases in the wind speed above the canopy stimulate vertical oscillations in the canopy layer that are both amplitude- and frequency-modulated during the event. A simple model is presented to support the postulate that these oscillations result from a resonant interaction, hypothesized to be a consequence of a vertically fluctuating pressure gradient force operating on a deepening stable layer near canopy top. Model results indicate that the recovery of the layer takes approximately twice as long as the period of enhanced wind that produced the event.

Fitzjarrald, David R.↗
NASA NTRS1991

Simulating Dynamics Of The Gamma-Ray Observatory Satellite

GRODY developed alongside GROSS computer program (GSC-13147), a FORTRAN dynamics-simulator program performing same functions. GRODY conceived for use in case study to assess feasibility and effectiveness of Ada programming language for development of flight-dynamics software. Designed for those familiar with analysis of attitudes of spacecraft. Supports planning of maneuvers as well as analytical testing and evaluation of attitude-determination and -control system used on board Gamma-Ray Observatory (GRO) satellite. Simulates computer and control processor electronics aboard GRO satellite. Enables analyst to check and update commands sent from ground and values of parameters, obtain displays of status of simulation, interrupt simulation, analyze previous runs, and obtain printed output of simulation runs. Written mainly in Ada (99 percent) with remainder in FORTRAN.

Stark, M.↗
NASA NTRS1991

Preventing Aim At An Undesired Target

Electronic system controls changes in orientation of optical instrument. Slew-control system includes avoidance-control logic, which overrides slew-control error generator when line of sight of instrument comes within cone of avoidance around line of sight to Sun. Normal slewing trajectory interrupted by avoidance-control logic, which computes actuator torques taking line of sight around cone of avoidance. Used to protect delicate photodetectors in servocontrolled infrared spectrometer or imaging instrument against damage occurring if instrument aimed at Sun or another excessively bright object.

Goodzeit, Neil E.↗
NASA NTRS1990

Data transmission networks

A task order was written by the High Resolution, High Frame Rate Video Technology (HHVT) project engineers to investigate data compression techniques that could be applied to the HHVT system, and both existing and planned downlink/uplink capabilities of the Space Shuttle and Space Station Freedom. The following tasks were included: (1) Investigate signal channel availability and determine both the maximum possible data rate and the average data rate; (2) Identify time blocks for HHVT video transmission assuming time sharing and interruptions in the communication links; (3) Determine the bit error rates to be expected; and (4) Define the transmit and receive interfaces. A summary chart of the data transmission capabilities for Tracking and Data Relay Satellite System (TDRSS), the Space Shuttle, Space Station Freedom, Spacelab, and USLab are also presented.

Alexovich, Robert↗
NASA NTRS1990

Fluid Phase Separation (FPS) experiment for flight on the shuttle in a Get Away Special (GAS) canister: Design and fabrication

The separation of fluid phases in microgravity environments is of importance to environmental control and life support systems (ECLSS) and materials processing in space. A successful fluid phase separation experiment will demonstrate a proof of concept for the separation technique and add to the knowledge base of material behavior. The phase separation experiment will contain a premixed fluid that will be exposed to a microgravity environment. After the phase separation of the compound has occurred, small samples of each of the species will be taken for analysis on Earth. By correlating the time of separation and the temperature history of the fluid, it will be possible to characterize the process. The phase separation experiment is totally self-contained, with three levels of containment on all fluids, and provides all necessary electrical power and control. The controller regulates the temperature of the fluid and controls data logging and sampling. An astronaut-activated switch will initiate the experiment and an unmaskable interrupt is provided for shutdown. The experiment has been integrated into space available on a manifested Get Away Special (GAS) experiment, CONCAP 2, part of the Consortium for Materials Complex Autonomous Payload (CAP) Program, scheduled for STS 42 in April 1991. Presented here are the design and the production of a fluid phase separation experiment for rapid implementation at low cost.

Source record↗
NASA NTRS1990

Analysis of routine communication in the air traffic control system

The present project has three related goals. The first is to describe the organization of routine controller-pilot communication. This includes identifying the basic units of communication and how they are organized into discourse, how controllers and pilots use language to achieve their goals, and what topics they discuss. The second goal is to identify the type and frequency of problems that interrupt routine information transfer and prompt pilots and controllers to focus on the communication itself. The authors analyze the costs of these problems in terms of communication efficiency, and the techniques used to resolve these problems. Third, the authors hope to identify factors associated with communication problems, such as deviations from conventional air traffic control procedures.

Clark, Herbert H.↗
NASA NTRS1991

A preliminary investigation of acousto-ultrasonic NDE of metal matrix composite test specimens

Acousto-ultrasonic (AU) measurements were performed on a series of tensile specimens composed of 8 laminated layers of continuous, SiC fiber reinforced Ti-15-3 matrix. The following subject areas are covered: AU signal analysis; tensile behavior; AU and interrupted tensile tests; AU and thermally cycled specimens; AU and stiffness; and AU and specimen geometry.

Kautz, Harold E.↗
NASA NTRS1991

Fiber Optic Tactical Local Network (FOTLAN)

A 100 Mbit/s FDDI (fiber distributed data interface) network interface unit is described that supports real-time data, voice and video. Its high-speed interrupt-driven hardware architecture efficiently manages stream and packet data transfer to the FDDI network. Other enhancements include modular single-mode laser-diode fiber optic links to maximize node spacing, optic bypass switches for increased fault tolerance, and a hardware performance monitor to gather real-time network diagnostics.

Bergman, L. A.↗
NASA NTRS1989

The effect of hydrogen on the deformation behavior of a single crystal nickel-base superalloy

The effect of hydrogen on the tensile deformation behavior of PWA 1480 is presented. Tensile tests were interrupted at different plastic strain levels to observe the development of the dislocation structure. Transmission electron microscopy (TEM) foils were cut perpendicular to the tensile axis to allow the deformation of both phases to be simultaneously observed as well as parallel to zone axes (III) to show the superdislocations on their slip planes. Similar to other nickel-base superalloys, hydrogen was detrimental to the room temperature tensile properties of PWA 1480. There was little effect on strength, however the material was severely embrittled. Even without hydrogen, the elongation-to-failure was only approximately 3 percent. The tensile fracture surface was made up primarily of ductile voids with regions of cleavage fracture. These cleavage facets are the eutectic (gamma') in the microstructure. It was shown by quantitative fractography that hydrogen embrittles the eutectic (gamma') and causes the crack path to seek out and fracture through the eutectic (gamma'). There was two to three times the amount of cleavage on the fracture surface of the hydrogen-charged samples than on the surface of the uncharged samples. The effect of hydrogen can also be seen in the dislocation structure. There is a marked tendency for dislocation trapping in the gamma matrix with and without hydrogen at all plastic strain levels. Without hydrogen there is a high dislocation density in the gamma matrix leading to strain exhaustion in this region and failure through the matrix. The dislocation structure at failure with hydrogen is slightly different. The TEM foils cut parallel to zone axes (III) showed dislocations wrapping around gamma precipitates. Zone axes (001) foils show that there is a lower dislocation density in the gamma matrix which can be linked to the effects of hydrogen on the fracture behavior. The primary activity in the gamma precipitates is in the form of superlattice intrinsic stacking faults (SISFs). These faults have also been reported in other ordered alloys and superalloys.

Walston, W. S.↗
NASA NTRS1991

Tensile deformation damage in SiC reinforced Ti-15V-3Cr-3Al-3Sn

The damage mechanisms of a laminated, continuous SiC fiber reinforced Ti-15V-3Cr-3Al-3Sn (Ti-15-3) composite were investigated. Specimens consisting of unidirectional as well as cross-ply laminates were pulled in tension to failure at room temperature and 427 C and subsequently examined metallographically. Selected specimens were interrupted at various strain increments and examined to document the development of damage. When possible, a micromechanical stress analysis was performed to aid in the explanation of the observed damage. The analyses provide average constituent microstresses and laminate stresses and strains. It was found that the damage states were dependent upon the fiber architecture.

Lerch, Bradley A.↗
NASA NTRS1990

Shuttle rendezvous and proximity operations

Shuttle rendezvous and proximity operations trajectory control techniques are reviewed and it is noted that they have been affected by many factors including Shuttle system design constraints such as limited forward RCS and single point radar failures. Crew training requirements and mission operations constraints such as large launch windows, flexibility, and contingency profile interrupts are also integral factors. The resulting trajectory control design primarily uses ground support for the launch and orbit adjust phases, standardized crew techniques utilizing onboard software for the relative navigation flight phase, and mission unique manual control for a flexible proximity operations phase.

Pearson, Don J.↗
NASA NTRS1990

The Tracking and Data Relay Satellite System - The next decade

As currently envisioned, NASA's Tracking and Data Relay Satellite System (TDRSS) will support the tracking and telecommunications requirements of LEO user satellites until the late 1990s, when existing TDRSS satellites will reach the end of their service lives. Spacecraft replacement is conceived as inseparable from network expansion for the accommodation of user population growth and the improvement of user services. The objective is to achieve a cost-effective/low-risk transition from TDRSS to Advanced TDRSS without interruption of user support. Attention is presently given to Advanced TDRSS architectural candidates studied and the choices which have emerged through technical tradeoff assessments.

Guion, William S.↗
NASA NTRS1991

Address tracing for parallel machines

Recently implemented parallel system address-tracing methods based on several metrics are surveyed. The issues specific to collection of traces for both shared and distributed memory parallel computers are highlighted. Five general categories of address-trace collection methods are examined: hardware-captured, interrupt-based, simulation-based, altered microcode-based, and instrumented program-based traces. The problems unique to shared memory and distributed memory multiprocessors are examined separately.

Stunkel, Craig B.↗
NASA NTRS1991

MOCVD manifold switching effects on growth and characterization

A combined modeling and experimental approach is used to quantify the effects of various manifold components on the switching speed in metalorganic chemical vapor deposition (MOCVD). In particular, two alternative vent-run high-speed switching manifold designs suitable for either continuous or interrupted growth have been investigated. Both designs are incorporated in a common manifold, instrumented with a mass spectrometer. The experiments have been performed using nitrogen as the transport gas and argon as the simulated source gas. The advantages and limitations of two designs are discussed. It is found that while constant flow manifold switching systems may have fluid dynamic advantages, care must be taken to minimize sections of the supply manifold with low flow rates if rapid changes in alloy composition are required.

Clark, Ivan O.↗