SEARCH · Search NASA

Results for “linked data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

DOE OSTI2016

Concentrations and Sources of Airborne Particles in a Neonatal Intensive Care Unit

Premature infants in neonatal intensive care units (NICUs) have underdeveloped immune systems, making them susceptible to adverse health consequences from air pollutant exposure. Little is known about the sources of indoor airborne particles that contribute to the exposure of premature infants in the NICU environment. In this study, we monitored the spatial and temporal variations of airborne particulate matter concentrations along with other indoor environmental parameters and human occupancy. The experiments were conducted over one year in a private-style NICU. The NICU was served by a central heating, ventilation and air-conditioning (HVAC) system equipped with an economizer and a high-efficiency particle filtration system. The following parameters were measured continuously during weekdays with 1-min resolution: particles larger than 0.3 μm resolved into 6 size groups, CO 2 level, dry-bulb temperature and relative humidity, and presence or absence of occupants. Altogether, over sixteen periods of a few weeks each, measurements were conducted in rooms occupied with premature infants. In parallel, a second monitoring station was operated in a nearby hallway or at the local nurses’ station. The monitoring data suggest a strong link between indoor particle concentrations and human occupancy. Detected particle peaks from occupancy were clearly discernible among larger particles and imperceptible for submicron (0.3–1 μm) particles. The mean indoor particle mass concentrations averaged across the size range 0.3–10 μm during occupied periods was 1.9 μg/m 3 , approximately 2.5 times the concentration during unoccupied periods (0.8 μg/m 3 ). Contributions of within-room emissions to total PM10 mass in the baby rooms averaged 37–81%. Near-room indoor emissions and outdoor sources contributed 18–59% and 1–5%, respectively. Airborne particle levels in the size range 1–10 μm showed strong dependence on human activities, indicating the importance of indoor-generated particles for infant’s exposure to airborne particulate matter in the NICU.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2021

Development of Efficient Process for Manufacturing of Thermoplastic Composites with Tailored Properties (CRADA 511)

This is a collaborative effort between Battelle Memorial Institute as manager and operator of Pacific Northwest National Laboratory (PNNL) and ESI North America Inc. (“ESI” or “Participant”) to apply computation and data analytics to the challenge of light weighting with a focus on the battery enclosures of electric vehicles (EVs). EVs use heavy batteries to increase range and power. A complex-shaped battery enclosure is required to meet a host of challenging performance requirements. The ability to virtually develop composite parts such as battery enclosure with tailored properties to meet required performance will be highly valuable to the automotive industry. However, efficient simulation of composite-manufacturing processes remains a challenging issue since simulation involves multiscale models in space and time, highly non-linear and anisotropic behavior, strongly coupled multi-physics, and complex geometries. This work will advance the state of the art by reducing the computational burden of composite optimization by using simulation data from a limited number of configurations off-line and then developing a reduced order model (ROM) using data analytics and machine learning (ML). Develop a data driven approach to link features of the material and manufacturing processes to the mechanical properties of thermoplastic composite parts.

42 ENGINEERING↗

DOE OSTI2024

Core Model Proposal #377: Breaking out food processing sector in GCAM

Purpose: This Core Model Proposal (CMP) expands the representation of detailed industry (CMP-326) in GCAM by separating the food processing sector from the aggregate “other industry sector”. Historical energy use is calibrated to IEA data for food processing, with some infilling for regions with limited IEA data. Food processing is linked to the GCAM food demand module, setting the energy demand for food processing in future periods based on food demand. While the direct price feedback is currently muted and the linkage is represented at the aggregated regional level, this CMP establishes the groundwork for a more detailed connection between the agrifood sectors and energy sectors in future work.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2026

Advancing SiC clad fuel performance model: bridging micro- and macro-scale models and experimental validation

This report presents a workflow for advancing fuel performance modeling of SiC composite cladding for light-water reactors by linking microscale, experimental data-informed finite element analysis with rod-scale fuel performance codes such as BISON. The workflow uses X-ray computed tomography (XCT) to capture the actual geometry and processing-induced defects of as-fabricated SiC composite tube specimens, particularly porosity and wall-thickness variations, and converts the segmented XCT volumes into image-based finite element meshes for high fidelity structural analysis.

Koyanagi, Takaaki [Oak Ridge National Laboratory (↗

DOE OSTI2019

SPRUCE Ground Observations of Phenology in Experimental Plots, 2018

This data set consists of phenological transition dates, as derived from direct observations of vegetative and reproductive phenology recorded by a human observer, from the SPRUCE experiment during 2018, the third full year of whole-ecosystem warming (Hanson et al. 2017). Both spring and autumn phenological events are included. Since April 2016, human observers have been directly tracking the phenology of both woody and herbaceous species on a weekly schedule within the SPRUCE experimental chambers. The observed date report here is the first survey date on which an event/phenophase was definitively observed. The SPRUCE experiment is located within the S1 peat bog at the Marcell Experimental Forest, approximately 40 km north of Grand Rapids in north-central Minnesota, USA. User note: Ground observations of phenology from 2016-2020 are available. See SPRUCE Ground Observations of Phenology in Experimental Plots, 2021 https://doi.org/10.25581/spruce.094/1874936 for the most recent data as well as links to all other ground phenology datasets.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

SPRUCE Ground Observations of Phenology in Experimental Plots, 2019

This data set consists of phenological transition dates, as derived from direct observations of vegetative and reproductive phenology recorded by a human observer, from the SPRUCE experiment during 2019, the third full year of whole-ecosystem warming (Hanson et al. 2017). Both spring and autumn phenological events are included. Since April 2016, human observers have been directly tracking the phenology of both woody and herbaceous species on a weekly schedule within the SPRUCE experimental chambers. The observed date report here is the first survey date on which an event/phenophase was definitively observed. The SPRUCE experiment is located within the S1 peat bog at the Marcell Experimental Forest, approximately 40 km north of Grand Rapids in north-central Minnesota, USA. User note: Ground observations of phenology from 2016-2021 are available. See SPRUCE Ground Observations of Phenology in Experimental Plots, 2021 https://doi.org/10.25581/spruce.094/1874936 for the most recent data as well as links to all other ground phenology datasets.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

SPRUCE Ground Observations of Phenology in Experimental Plots, 2020

This data set consists of one comma separated (*.csv) file containing phenological transition dates, as derived from direct observations of vegetative and reproductive phenology recorded by a human observer, from the SPRUCE experiment during 2020, the fifth full year of whole-ecosystem warming (Hanson et al. 2017). Both spring and autumn phenological events are included. Since April 2016, human observers have been directly tracking the phenology of both woody and herbaceous species on a weekly schedule within the SPRUCE experimental chambers, these data are reported in annual ground observations data sets (see Related Data Sets). The observed date reported here is the first survey date in 2020 on which an event/phenophase was definitively observed. This data set also contains a companion file in HTML (*.html) format containing figures showing the relationship between the day of year and temperature treatment for different phenological phases by species for 2020. User note: Ground observations of phenology from 2016-2021 are available. SPRUCE Ground Observations of Phenology in Experimental Plots 2021, https://doi.org/10.25581/spruce.099/1874936 for the most recent data as well as links to all other ground phenology datasets.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

SPRUCE Ground Observations of Phenology in Experimental Plots, 2016-2017

This data set consists of phenological transition dates, as derived from direct observations of vegetative and reproductive phenology recorded by a human observer, from the SPRUCE experiment during the 2+ years (August 2015 through December 2017) of whole-ecosystem warming. For 2016, only springtime (April - June) phenological events are included. For 2017 (April - December), spring and autumn events are included. Beginning in April 2016, human observers have been directly tracking the phenology of both woody and herbaceous species on a weekly schedule within the SPRUCE experimental chambers. The observed date reported here is the first survey date on which an event/phenophase was definitively observed. User note: Ground observations of phenology from 2016-2021 are available. See SPRUCE Ground Observations of Phenology in Experimental Plots, 2021 https://doi.org/10.25581/spruce.094/1874936 for the most recent data as well as links to all other ground phenology datasets.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

An Approach to Estimate Atmospheric Greenhouse Gas Total Columns Mole Fraction from Partial Column Sampling

This paper presents a new conceptual approach to estimate total column mole fractions of CO 2 and CH 4 using partial column data. It provides a link between airborne in situ and remote sensing observations of greenhouse gases. The method relies on in situ observations, external ancillary sources of information (e.g., atmospheric transport models), and a regression kriging framework. We evaluate our new approach using National Oceanic and Atmospheric Administration's (NOAA's) AirCore program-in situ vertical profiles of CO 2 and CH 4 collected from weather balloons. Our paper shows that under the specific conditions of this study and assumption of unbiasedness, airborne observations up to 6500-9500maltitude are required to achieve comparable total column CO 2 mole fraction uncertainty as the Total Carbon Column Observing Network (TCCON) network provides, given as a precision of the ratio between observed and true total column-integrated mole fraction, assuming 400 ppm XCO 2 (2σ, e.g., 0.8 ppm). If properly calibrated, our approach could be applied to vertical profiles of CO 2 collected from aircraft using a few flask samples, while retaining similar uncertainty level. Our total column CH 4 estimates, by contrast, are less accurate than TCCON's. Aircrafts are not as spatially constrained as TCCON ground stations, so our approach adds value to aircraft-based vertical profiles for evaluating remote sensing platforms.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

IM3 Phase 2 Official Simulations: GCAM-Demeter-SELECT Annualized Land Use and Land Cover, Wood Harvest and Fertilization Data with Dynamic Urbanization Harmonized to CLM Land Definitions at 0.125 Degrees

Annualized land use land cover data, including wood harvest and fertilizer use data from the Global Change Analysis Model (GCAM) downscaled to 0.125 degrees for couping with the Community Land Model (CLM). GCAM here refers to GCAM-USA v5.3.im3 which has an enhanced electricity sector and an updated data system needed to represent regional to local scale dynamics. Data is also harmonized with future urbanization projections from the Spatially-Explicit, Long-term, Empirical City developmenT (SELECT) model. Projections/Data are generated using the demeter land use and land cover downscaling model. Original projections were generated at 0.05 degrees before being aggregared to 0.125 degrees. Projections are available for 8 alternative scenarios. Two versions of final data are included- one with managed forests or harvested forest area per pixel broken out and one with the same aggregated into total forests. Following folders are included: demeter_78_PFT_output:This is the final output of dynamic land use land cover change for 78 PFTs as required by CLM raw_outputs_incl_managed_forest: This is the final output but with managed forests broken out as a different PFT. Essentially a 79th PFT is added. wood_harvest_outputs: Wood harvest output per pixel in gC/m2 fertilization_outputs: Fertilizer use per pixel in gN/m2 Each NetCDF file in each folder represents a projection for a separate year, scenario. Land use outputs are organized as PFT level data saved as subdata. Link to GCAM version used- https://data.msdlive.org/records/yb23g-44274 Link to SELECT documentation -https://www.sciencedirect.com/science/article/pii/S1364815219301707 Link to CLM documentation- - https://www.cesm.ucar.edu/models/clm In case of questions contact- kanishka.narayan@pnnl.gov

GCAM-USA↗

DOE OSTI2013

Zone routing in a torus network

A system for routing data in a network comprising a network logic device at a sending node for determining a path between the sending node and a receiving node, wherein the network logic device sets one or more selection bits and one or more hint bits within the data packet, a control register for storing one or more masks, wherein the network logic device uses the one or more selection bits to select a mask from the control register and the network logic device applies the selected mask to the hint bits to restrict routing of the data packet to one or more routing directions for the data packet within the network and selects one of the restricted routing directions from the one or more routing directions and sends the data packet along a link in the selected routing direction toward the receiving node.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2013

Security of Classic PN-Spreading Codes for Hybrid DS/FH Spread-Spectrum Systems

Hybrid direct sequence/frequency hopping (DS/FH) spread-spectrum communication systems have recently received considerable interest in commercial applications in addition to their use in military communications because they accommodate high data rates with high link integrity, even in the presence of significant multipath effects and interfering signals. The security of hybrid DS/FH systems strongly depends on the choice of PN-spreading code employed. In this paper, we examine the security, in terms of unicity distance, of linear maximal-length, Gold, and Kasami PN-spreading codes for DS, FH, and hybrid DS/FH spread-spectrum systems without additional encryption methods. The unicity distance is a measure of the minimum amount of ciphertext required by an eavesdropper to uniquely determine the specific key used in a cryptosystem and hence break the cipher. Numerical results are presented to compare the security of the considered PN-spreading codes under known-ciphertext attacks.

direct sequence↗

DOE OSTI2016

Falcon: A Temporal Visual Analysis System

Flexible visible exploration of long, high-resolution time series from multiple sensor streams is a challenge in several domains. Falcon is a visual analytics approach that helps researchers acquire a deep understanding of patterns in log and imagery data. Falcon allows users to interactively explore large, time-oriented data sets from multiple linked perspectives. Falcon provides overviews, detailed views, and unique segmented time series visualizations with multiple levels of detail. These capabilities are applicable to the analysis of any quantitative time series.

Steed, Chad A.↗

DOE OSTI2017

System for estimating fatigue damage

In one aspect, a system for estimating fatigue damage in a riser string is provided. The system includes a plurality of accelerometers which can be deployed along a riser string and a communications link to transmit accelerometer data from the plurality of accelerometers to one or more data processors in real time. With data from a limited number of accelerometers located at sensor locations, the system estimates an optimized current profile along the entire length of the riser including riser locations where no accelerometer is present. The optimized current profile is then used to estimate damage rates to individual riser components and to update a total accumulated damage to individual riser components. The number of sensor locations is small relative to the length of a deepwater riser string, and a riser string several miles long can be reliably monitored along its entire length by fewer than twenty sensor locations.

47 OTHER INSTRUMENTATION↗

DOE OSTI2017

Effect of Additional Incentives for Aviation Biofuels: Results from the Biomass Scenario Model

The National Renewable Energy Laboratory supported the Department of Energy, Bioenergy Technologies Office, with analysis of alternative jet fuels in collaboration with the U.S. Department of Transportation, Federal Aviation Administration. Airlines for America requested additional exploratory scenarios within FAA analytic framework. Airlines for America requested additional analysis using the same analytic framework, the Biomass Scenario Model. The results were presented at a public working meeting of the California Air Resources Board on including alternative jet fuel in the Low Carbon Fuel Standard on March 17, 2017 (https://www.arb.ca.gov/fuels/lcfs/lcfs_meetings/lcfs_meetings.htm). This presentation clarifies and annotates the slides from the public working meeting, and provides a link to the full data set. NREL does not advocate for or against the policies analyzed in this study.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2017

Effect of Additional Incentives for Aviation Biofuels: Results from the Biomass Scenario Model

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2018

Quantum Link: Building the U.S. Quantum Superhighway

The Quantum Link is an ambitious project by Argonne, Fermilab and the University of Chicago to bring the property of entanglement into the real world. Entangling objects 30 miles apart, between Argonne and Fermi, the Quantum Link seeks to answer questions like, “What is the meaning of entanglement?” and “Can you use entangled states, separated 30 miles apart, as a type of superhighway to transfer information from one point to the other?” Using an optical fiber network built 12 years ago by the state of Illinois to link hi-speed data centers, the project gives researchers a real-world view of what a quantum network might look like.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2015

Investigation of P(VDF-TrFE)/ZrO{sub 2}-MMA polymer composites applied to radiation shielding

Exposure to high radiation dose in medical diagnostic imaging procedures can lead patients to suffer tissue damaging. However, there are several studies that identify significant dose reduction with the use of radiation protective attenuators, minimizing the delivered dose in the region that covers the main beam, while preserving the diagnostic quality of the generated image. Most radiation attenuator materials are produced from shielding metal containing composites, whose efficiency is the goal of investigations around the world. In this context, polymeric materials were chosen for this investigation in order to provide light-weighted and flexible protective composites, a must in personal protective shielding. Therefore, this work is concerned to the investigation of poly(vinylidene fluoride - try-fluor-ethylene) [P(VDF-TrFE)] copolymers mixed with zirconia nanoparticles. The resulting polymer composites, prepared with 1, 2, 3, 5 and 10 at.% of ZrO{sub 2} nanoparticles, were investigated for application as protective shielding in some interventional radiology procedures. Two variety of composites were produced, one using pure ZrO{sub 2} nanoparticles and the other using sol-gel route with zirconium butoxide as the precursor for zirconium oxide nano-clusters. The P(VDFTrFE)/ ZrO2-MMA polymer composites produced by sol-gel route have provided a much better dispersion of the pure ZrO{sub 2} material into the P(VDF-TrFE) host matrix. UV-Vis and FTIR spectrometry and differential scanning calorimetry (DSC) were used to characterize the composite samples. FTIR data reveal a possible link between the MMA monomers with the P(VDF-TrFE) chain through shared C=O bonds. The radiation shielding characterization was conducted by using a 70 kV x-rays beam which is applicable, for instances, in catheter angiography. The results demonstrate that composites with 10% of ZrO{sub 2}, and only 1.0 mm thick, can attenuate 60% of the x-rays beam. The composite density was evaluated to be 2.20 g/cm{sup 3}. The results indicate that P(VDF-TrFE)/ZrO{sub 2}-MMA polymer composites have potential to be investigated as light-weighted and flexible protective shielding for application in some radiological procedures that uses low kilovoltage x-ray beams. (authors)

36 MATERIALS SCIENCE↗