Search NASA⌕ Search

SEARCH · Search NASA

Results for “mobility simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Turbulent Mixing of Multiphase Flow

Thus we conduct numerical simulations of multiphase fluids stirred by two-dimensional turbulence to assess the possibility of self-similar drop size distribution in turbulence. In our turbulence simulations, we also explore the non-diffusive limit, where molecular mobility for the interface is vanishing. Special care is needed to transport the non-diffusive interface. Numerically, we use the particle level set method to evolve the interface. Instead of using the usual methods to calculate the surface tension force from the level set function, we reconstruct the interface based on phase- field modeling, and calculate the continuum surface tension forcing from the reconstructed interface.

Young, Y.-N.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-12833-DND

A field test on a 3-microphone array at NASA Langley Research Center was conducted using a mobile controlled infrasonic source. A Helmholtz resonator, used to provide a simulated point source for infrasonic propagation studies, had an output SPL of 99 dB (at 1 m) at its resonance frequency of 9.45 Hz. The 3-microphone array was arranged as an equilateral triangle with microphones spacing of 30.48 m (100 ft) and at a distance of more than 85.3 m (280 ft) from the source. The signal level was 40 dB above the background noise in a 1-Hz band. Measurements of the acoustical response for each of the array microphones were recorded and the received signal was measured at the nearest microphone to be 60 dB (6 dB per doubling of distance).

Qamar A Shams↗
DOE OSTI2025

Incorporating Elevation in Traffic-Vehicle CO-Simulation: Issues, Impacts, and Solutions

Traffic-vehicle co-simulation couples microscopic traffic simulation with full-body vehicle dynamics to assess system-level impacts on mobility, energy, and safety with greater realism. Incorporating elevation is critical for accurately modeling vehicle behavior and energy use, especially for gradient-sensitive vehicles such as electric and heavy-duty trucks. However, raw elevation data often contain noise, discontinuities, and inconsistencies. While such issues may be negligible in traditional traffic simulations, they significantly affect traffic-vehicle co-simulations where vehicle dynamics are sensitive to road grade variations. This paper investigates the impact of unprocessed elevation data on vehicle behavior and energy consumption using a 42-mile simulation along Interstate 81. We propose an elevation processing workflow that can mitigate the effects stem from elevation data issues, improving the realism and stability of traffic-vehicle co-simulation. Results show that the method effectively removes noise and abrupt elevation transitions while preserving roadway geometry.

Xu, Guanhao [ORNL] (ORCID:0000000214326357)↗
DOE OSTI2022

Multiscale Experiments and Multiphysics Simulation of Multiphase Flow for Transportable Small Modular Reactors

A new type of safe, small, transportable nuclear reactor would address the intense and ever-growing global demand for energy produced via a resilient, carbon-free energy source. In this regard, transportable small modular reactors (SMRs) are being designed and developed for electricity generation within small/micro-grid/off-grid isolated systems, as well as for heat generation in industrial/residential applications. These reactors feature the capability to be fully factory fabricated and then directly transported to utilities’ sites as “plug-and-play” systems. Research and development (R&D) programs are underway at Idaho National Laboratory (INL) to successfully design, develop, and demonstrate such safe-by-design mobile reactor technologies, in collaboration with partner organizations. Multiscale experimental facilities and multiphysics simulation tools are required for reactor design verification and validation (V&V), and licensing. These advanced reactors are intended to feature passive safety systems such as passive containment cooling systems (PCCS), which consist of multiphase flows and multispecies distributions. This seminar talk will focus on designing and analyzing transportable SMR PCCS by using multiscale experiments and multiphysics computational fluid dynamics (CFD) simulations to support reactor licensing and safety. The corresponding research challenges are addressed via supportive verification and validation results generated by the models and simulation tools in combination with selective parametric and uncertainty analysis. This solution approach could blaze the trail for commercial adoption of such technologies. The facilities, simulation capabilities, and research opportunities available at INL in regard to such reactors and the integrated energy systems with which they go hand in hand are also discussed briefly, and may spark interest in deeper research as well as new collaborative projects.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1987

Effect of wave localization on plasma instabilities

The Anderson model of wave localization in random media is involved to study the effect of solar wind density turbulence on plasma processes associated with the solar type III radio burst. ISEE-3 satellite data indicate that a possible model for the type III process is the parametric decay of Langmuir waves excited by solar flare electron streams into daughter electromagnetic and ion acoustic waves. The threshold for this instability, however, is much higher than observed Langmuir wave levels because of rapid wave convection of the transverse electromagnetic daughter wave in the case where the solar wind is assumed homogeneous. Langmuir and transverse waves near critical density satisfy the Ioffe-Reigel criteria for wave localization in the solar wind with observed density fluctuations -1 percent. Numerical simulations of wave propagation in random media confirm the localization length predictions of Escande and Souillard for stationary density fluctations. For mobile density fluctuations localized wave packets spread at the propagation velocity of the density fluctuations rather than the group velocity of the waves. Computer simulations using a linearized hybrid code show that an electron beam will excite localized Langmuir waves in a plasma with density turbulence. An action principle approach is used to develop a theory of non-linear wave processes when waves are localized. A theory of resonant particles diffusion by localized waves is developed to explain the saturation of the beam-plasma instability. It is argued that localization of electromagnetic waves will allow the instability threshold to be exceeded for the parametric decay discussed above.

Levedahl, William Kirk↗
NASA NTRS2024

Evaluation of Initial and Midterm Air Traffic Procedures for Urban Air Mobility Operations

This paper describes a follow-on joint human-in-the loop (HITL) simulation effort by NASA and Joby Aviation that builds on the results of these previous studies. It extends that work by comparing the LOA condition for Initial UAM operations to Midterm operations that includes corridor airspace structures and some other changes to the operating environment. This is the first reported air traffic controller-in-the-loop evaluation of the corridor condition in a high-fidelity simulation environment. The following sections describe the routes, scenarios, and operating conditions along with metrics used to evaluate feasibility from the air traffic controllers’ perspectives. The results section presents the traffic levels that were feasible in each condition and concludes with recommendations for extending the scope and applicability of evaluations like this one in the future.

Savvy Verma↗
NASA NTRS1988

A case study of mobilization and transport of Saharan dust

The mobilization and transport of the Saharan dust over the West Africa and the tropical Atlantic Ocean during the days of August 23-28, 1974, were investigated using the data set developed by GFDL, together with numerical models of the atmosphere and aerosol. It was found that the mobilization of dust during this period was related to the passage of a shallow easterly wave; mobilization was effected by dry convective mixing of low-level jets associated with the easterly wave. Model simulations show that the aerosol at any one point can be a complicated mixture of particles lifted at different times and different places; bimodal size distributions developed when dust was mobilized within a dust plume that was generated on a previous day.

Westphal, Douglas L.↗
NASA NTRS1974

Performance evaluation of a second-generation elastic loop mobility system

Tests were conducted to evaluate the mobility performance of a second-generation Elastic Loop Mobility System (ELMS II). Performance on level test lanes and slopes of lunar soil simulant (LSS) and obstacle-surmounting and crevasse-crossing capabilities were investigated. In addition, internal losses and contact pressure distributions were evaluated. To evaluate the soft-soil performance, two basic soil conditions were tested: loose (LSS1) and dense (LSS5). These conditions embrace the spectrum of soil strengths tested during recent studies for NASA related to the mobility performance of the LRV. Data indicated that for the tested range of the various performance parameters, performance was independent of unit load (contact pressure) and ELMS II drum angular velocity, but was influenced by soil strength and ELMS pitch mode. Power requirements were smaller at a given system output for dense soil than for loose soil. The total system output in terms of pull developed or slope-climbing capability was larger for the ELMS II operating in restrained-pitch mode than in free-pitch mode.

Melzer, K. J.↗
NASA NTRSDate not supplied

Parametric Optimization of Rigid Wheels for Planetary Surface Mobility Applications

Design-Build-Test approaches for spaceflight hardware are time and cost intensive, which can result in suboptimal mechanism designs. Optimization-based approaches that utilize high-fidelity models and physics simulation could overcome these limitations while simultaneously speeding up the mechanical design process and reducing cost. In this work, we present a toolchain that enables the multi-objective optimization of rigid rover wheels for planetary surface mobility applications. The toolchain uses Chrono’s Continuous Representation Model (CRM) functionality to simulate granular soil and performs multi-objective parametric optimization on candidate rover wheels to meet a desired performance criterion. The resulting wheel design is then evaluated experimentally using a single-wheel testbed. We end with a discussion of how the toolchain can be extended to simultaneously co-optimize other system parameters, such as system power consumption and feedback control gains.

Optimization↗
DOE OSTI2020

Ion Conductivity and Correlations in Model Salt-Doped Polymers: Effects of Interaction Strength and Concentration

Correlated anion and cation motion can greatly reduce the overall ion conductivity in electrolytes versus the ideal conductivity calculated based on the diffusion constants alone. Using coarse-grained molecular dynamics simulations, we calculate conductivity and the degree of uncorrelated ion motion in salt-doped homopolymers and block copolymers as a function of concentration and interaction strengths. Calculating conductivity from ion mobility under an applied electric field increases accuracy versus the typical use of fluctuation dissipation relationships in equilibrium simulations. In typical electrolytes, correlation in cation-anion motion is often expected to be reduced at low ion concentrations. Yet, for these polymer electrolytes with strong ion-polymer and ion-ion interactions, we find cation-anion motion is more correlated at lower concentrations when other variables are held constant. We show this phenomenon is related to the slower ion cluster relaxation rate at low concentrations rather than the static spatial state of ion aggregation or the fraction of free ions.

36 MATERIALS SCIENCE↗
NASA NTRS2014

Demonstration of Prognostics-Enabled Decision Making Algorithms on a Hardware Mobile Robot Test Platform

Prognostics-enabled Decision Making (PDM) is an emerging research area that aims to integrate prognostic health information and knowledge about the future operating conditions into the process of selecting subsequent actions for the system. Previous work developing and testing PDM algorithms has been done in simulation; this paper describes the effort leading to a successful demonstration of PDM algorithms on a hardware mobile robot platform. The hardware platform, based on the K11 planetary rover prototype, was modified to allow injection of selected fault modes related to the rover’s electrical power subsystem. The PDM algorithms were adapted to the hardware platform, including development of a software module framework, a new route planner, and modifications to increase the algorithms’ robustness to sensor noise and system timing issues. A set of test scenarios was chosen to demonstrate the algorithms’ capabilities. The modifications to run with a hardware platform, the test scenarios, and the test results are described in detail. The results show a successful use of PDM algorithms on a hardware test platform to optimize mission planning in the presence of electrical system faults.

Prognosis↗
DOE OSTI2025

Exploring the relation between transonic dislocation glide and stacking fault width in FCC metals

Theory predicts limiting gliding velocities that dislocations cannot overcome. Computational and recent experiments have shown that these limiting velocities are soft barriers and dislocations can reach transonic speeds in high rate plastic deformation scenarios. In this paper we systematically examine the mobility of edge and screw dislocations in several face centered cubic (FCC) metals (Al, Au, Pt, and Ni) in the extreme large-applied-stress regime using molecular dynamics simulations. Our results show that edge dislocations are more likely to move at transonic velocities due to their high mobility and lower limiting velocity than screw dislocations. Importantly, among the considered FCC metals, the dislocation core structure determines the dislocation’s ability to reach transonic velocities. This is likely due to the variation in stacking fault width due to relativistic effects near the limiting velocities.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Airspace Performance Observations of Scalable Autonomous Operations in a High Density Vertiplex Simulation

The National Aeronautics and Space Administration’s (NASA’s) High Density Vertiplex (HDV) subproject aims to develop and demonstrate progressive automation technologies that contribute to the Advanced Air Mobility (AAM) concept. Using Human-and-Hardware-In-TheLoop (HHITL) techniques, HDV demonstrates initial vertiport automation services at vertiports with increased air traffic volume in both simulated and live test environments. In 2023, the Scalable Autonomous Operations (SAO) simulation was conducted in which prototype vertiport, airspace, and ground control station technologies were assessed on technical performance. During the SAO simulation, an observational study captured an initial impression of the HDV airspace performance, potential disruptions to the airspace, and highlighted some capability and procedural gaps. Observations took place in two parts. In the first part, five scenario use cases (Nominal, Missed Approach, Speed Change, Divert, and MultiAircraft Divert) were conducted with three human operator roles (Vertiport Manager, Fleet Manager, and Ground Control Station Operator). Researchers collected metrics on throughput, closest point of approach, and airborne delay. In the second part of the study, the Missed Approach scenario was observed under three traffic density levels (20, 40, and 60 operations per hour) to challenge the automation to correctly identify slots in the vertiport arrival schedule. The results showed that the automation successfully found a slot for the Missed Approach vehicle in the 20 operations per hour condition, after some delay it found one in the 40 condition, and it did not find one in the 60 condition. The observations of technical and human performance throughout the five scenario use cases and the Missed Approach case study indicated that for HDV to increase traffic density and maintain or increase throughput, airspace monitoring services should be able to detect and resolve conflicts between aircraft. Furthermore, the roles and responsibilities of human operators need additional definition when it comes to responding to vehicle conflicts.

Advanced Air Mobility↗
DOE OSTI2021

N-Doping improves charge transport and morphology in the organic non-fullerene acceptor O-IDTBR

Molecular doping has been shown to improve the performance of various organic (opto)electronic devices. When compared to p-doped systems, research into n-doped organic small-molecules is relatively limited, primarily due to the lack of suitable dopants and the often encountered unfavourable microstructural effects. These factors have prevented the use of n-doping in a wider range of existing materials, such as non-fullerene acceptors (NFAs), that have already shown great promise for a range of (opto)electronic applications. Here, we show that several different molecular n-dopants, namely [1,2-b:2',1'-d]benzo[i][2.5]benzodiazocine potassium triflate adduct (DMBI-BDZC), tetra-n-butylammonium fluoride (TBAF) and 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI), can be used to n-dope the molecular semiconductor O-IDTBR, a promising NFA, and increase the electron field-effect mobility to >1 cm 2 V -1 s -1 . By combining complementary experimental techniques with computer simulations of doping and charge carrier dynamics, we show that improved charge transport arises from synergistic effects of n-type doping and morphological changes. Specifically, a new, previously unreported dopant-induced packing orientation results in one of the highest electron mobility values reported to-date for an NFA molecule. Overall, this work highlights the importance of dopant–semiconductor interactions and their impact on morphology, showing that dopant-induced molecular packing motifs may be generic and a key element of the charge transport enhancement observed in doped organics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Real-time control of connected vehicles in signalized corridors using pseudospectral convex optimization

Recent advances in Connected and Automated Vehicle (CAV) technologies have opened up new opportunities to enable safe, efficient, and sustainable transportation systems. However, developing reliable and rapid speed control algorithms in highly dynamic environments with complex inter-vehicle interactions and nonlinear vehicle dynamics is still a daunting task. In this paper, we develop a novel speed control method for CAVs to produce optimal speed profiles that minimize the fuel consumption and avoid idling at signalized intersections. To this end, an optimal control problem is formulated using the information of the upcoming traffic signal to adapt vehicles' speeds to avoid frequent stop-and-go driving patterns. Here, by applying the pseudospectral discretization method and the sequential convex programming method, the computational efficiency is greatly improved, enabling potential real-time on-vehicle applications. In addition, the algorithm is implemented under a model predictive control framework to ensure online control with instant response for collision avoidance and robust vehicle coordination. The proposed algorithm is verified through numerical simulations of three different traffic scenarios. The convergence and accuracy of the proposed approach are demonstrated by comparing with a popular nonlinear solver. Furthermore, the benefit of the proposed method in both traffic mobility and fuel efficiency is validated using the speed profile determined from a traffic following model in a simulation software as the baseline.

42 ENGINEERING↗
NASA NTRSDate not supplied

Hazard Perception & Avoidance (HPA), Assured Vehicle Automation 1 Simulation (AVA-1h) Results Outbrief

In late 2022, the Human Autonomy Teaming Lab (NASA Ames Research Center) conducted a manned, human-in-the-loop (HITL) simulation. This HITL was the lab’s second Hazard Perception and Avoidance (HPA) technical work under NASA’s Advanced Air Mobility (AAM), Automated Flight and Contingency Management (AFCM) Sub-Project. The goals were to assess detect and avoid technology for manned, electric vertical takeoff and landing (eVTOL) aircraft. This simulation tested Resolution Advisory (RA) responses and return-to-course (RTC) maneuvers for the second version of the Airborne Collision Avoidance System’s (ACAS) rotary-wing (Xr) variant. This was conducted at the center's Vertical Motion Simulator (VMS), on a motion-based platform, and was configured to fly eVTOL aircraft while maneuvering for intruding traffic. Variables for this study included ACAS Xr modes (i.e., TA/RA and DAA) and phases of flight (i.e., Cruise, Hover, and Approach). The data collected included response times, losses of well clear, and pilots' noncompliances to alerts and guidance as well as subjective ratings like acceptability and perceived workload. Additional details and future anticipations are also discussed.

ACAS Xr↗
DOE OSTI2022

Effect of differently oriented interlayer phases on the radiation damage of Inconel-$\mathrm{Ni}$ multimetallic layered composite

Multimetallic layered composites (MMLCs) have shown an excellent potential for application under extreme environments, e.g., accident-tolerant fuel cladding, because of their low oxidation tendency and high corrosion resistance. Interfacial phases or complexions in nanocrystalline materials accelerate the annihilation of defects and enhance the radiation resistance of materials, making MMLCs with engineered interlayer phases compelling to deploy in extreme conditions. However, implementation of MMLCs in full capacity remained a challenge due to a lack of fundamental understanding of the underlying mechanisms governing the characteristics of the interface between the metallic layers. The precise role of interlayer phases in MMLCs and their interaction with defects, specifically under extreme conditions, is still unexplored. Pursuing atomistic simulations for various Inconel-Ni MMLCs model materials, we revealed accelerated defect mobility in interlayers with larger crystalline misorientation and the inverse relationship between the interface sink strength to the misorientation angle. Furthermore, we found a linear relation between interlayer misorientation angle with the density of radiation-induced defects and radiation enhanced displacements. So, our results indicate that radiation-induced material degradation is accelerated by the higher defect formation tendency of MMLCs with a high-angle interlayer interface.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Interfacial Hydrogen-Bond Dynamics in Transition Metal Compounds

Understanding how water behaves when confined within atomic layers of active transition-metal carbides, nitrides, and carbonitrides is essential for uncovering the fundamental principles needed to engineer solid–liquid interfaces at the atomic scale. Yet, how lattice element chemistry and surface termination groups collectively regulate the structure and mobility of such interlayer water remains poorly understood. Here, we present a composition-controlled investigation of interlayer water dynamics in layered transition-metal nitride, carbide, and carbonitride systems using a systematic integration of quasi-elastic neutron scattering (QENS), ab initio molecular dynamics (AIMD) simulations, and density functional theory (DFT) calculations. QENS measurements show that nitride-rich systems host mobile, translationally diffusing water with thermally activated self-diffusion coefficients on the order of 10 –10 m 2 s –1 , whereas mixed C/N lattices confine water to localized, nontranslational motion that is insensitive to temperature. AIMD and DFT reveal that lattice C/N chemistry and surface functional group composition reshape the first hydration layer by modulating the surface electronic structure and termination-dependent hydrogen-bond networks, leading to pronounced differences in water ordering and thermal resilience. On the other hand, fully carbide systems exhibit intermediate behavior, highlighting that water mobility is not primarily controlled by the hydration level alone but by the coupling between lattice composition and surface chemistry. Overall, this study establishes how surface chemistry and lattice composition jointly control interfacial hydrogen bond dynamics, offering a mechanistic framework for designing transition-metal layered materials with tailored interfacial transport properties.

Hydration↗