Search NASA⌕ Search

SEARCH · Search NASA

Results for “model diagnostics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Technical note: AQMEII4 Activity 1: evaluation of wet and dry deposition schemes as an integral part of regional-scale air quality models

We present in this technical note the research protocol for phase 4 of the Air Quality Model Evaluation International Initiative (AQMEII4). This research initiative is divided into two activities, collectively having three goals: (i) to define the current state of the science with respect to representations of wet and especially dry deposition in regional models, (ii) to quantify the extent to which different dry deposition parameterizations influence retrospective air pollutant concentration and flux predictions, and (iii) to identify, through the use of a common set of detailed diagnostics, sensitivity simulations, model evaluation, and reduction of input uncertainty, the specific causes for the current range of these predictions. Activity 1 is dedicated to the diagnostic evaluation of wet and dry deposition processes in regional air quality models (described in this paper), and Activity 2 to the evaluation of dry deposition point models against ozone flux measurements at multiple towers with multiyear observations (to be described in future submissions as part of the special issue on AQMEII4). The scope of this paper is to present the scientific protocols for Activity 1, as well as to summarize the technical information associated with the different dry deposition approaches used by the participating research groups of AQMEII4. In addition to describing all common aspects and data used for this multi-model evaluation activity, most importantly, we present the strategy devised to allow a common process-level comparison of dry deposition obtained from models using sometimes very different dry deposition schemes. The strategy is based on adding detailed diagnostics to the algorithms used in the dry deposition modules of existing regional air quality models, in particular archiving diagnostics specific to land use–land cover (LULC) and creating standardized LULC categories to facilitate cross-comparison of LULC-specific dry deposition parameters and processes, as well as archiving effective conductance and effective flux as means for comparing the relative influence of different pathways towards the net or total dry deposition. This new approach, along with an analysis of precipitation and wet deposition fields, will provide an unprecedented process-oriented comparison of deposition in regional air quality models. Examples of how specific dry deposition schemes used in participating models have been reduced to the common set of comparable diagnostics defined for AQMEII4 are also presented.

54 ENVIRONMENTAL SCIENCES↗

A NEW DIAGNOSTIC OF MAGNETIC FIELD STRENGTHS IN RADIATIVELY COOLED SHOCKS

We show that it is possible to measure Alfvénic Mach numbers, defined as the shock velocity in the flow divided by the Alfvén velocity, for low-velocity (V{sub shock} ≲ 100 km s{sup −1}) radiative shocks. The method combines observations of bright forbidden lines with a measure of the size of the cooling zone, the latter typically obtained from spatial separation between the Balmer emission lines and the forbidden lines. Because magnetic fields become compressed as gas in the postshock region cools, even relatively weak preshock magnetic fields can be detected with this method. We derive analytical formulae that explain how the spatial separations relate to emission-line ratios, and compute a large grid of radiatively cooled shock models to develop diagnostic diagrams that can be used to derive Alfvénic Mach numbers in flows. Applying the method to existing data for a bright knot in the HH 111 jet, we obtain a relatively low Alfvénic Mach number of ∼2, indicative of a magnetized jet that has super-magnetosonic velocity perturbations within it.

79 ASTRONOMY AND ASTROPHYSICS↗

The effect of shock dynamics on compressibility of ignition-scale National Ignition Facility implosions

The effects of shock dynamics on compressibility of indirect-drive ignition-scale surrogate implosions, CH shells filled with D{sup 3}He gas, have been studied using charged-particle spectroscopy. Spectral measurements of D{sup 3}He protons produced at the shock-bang time probe the shock dynamics and in-flight characteristics of an implosion. The proton shock yield is found to vary by over an order of magnitude. A simple model relates the observed yield to incipient hot-spot adiabat, suggesting that implosions with rapid radiation-power increase during the main drive pulse may have a 2× higher hot-spot adiabat, potentially reducing compressibility. A self-consistent 1-D implosion model was used to infer the areal density (ρR) and the shell center-of-mass radius (R{sub cm}) from the downshift of the shock-produced D{sup 3}He protons. The observed ρR at shock-bang time is substantially higher for implosions, where the laser drive is on until near the compression bang time (“short-coast”), while longer-coasting implosions have lower ρR. This corresponds to a much larger temporal difference between the shock- and compression-bang time in the long-coast implosions (∼800 ps) than in the short-coast (∼400 ps); this will be verified with a future direct bang-time diagnostic. This model-inferred differential bang time contradicts radiation-hydrodynamic simulations, which predict constant 700–800 ps differential independent of coasting time; this result is potentially explained by uncertainties in modeling late-time ablation drive on the capsule. In an ignition experiment, an earlier shock-bang time resulting in an earlier onset of shell deceleration, potentially reducing compression and, thus, fuel ρR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stabilized FE simulation of prototype thermal-hydraulics problems with integrated adjoint-based capabilities

A critical aspect of applying modern computational solution methods to complex multiphysics systems of relevance to nuclear reactor modeling, is the assessment of the predictive capability of specific proposed mathematical models. In this respect the understanding of numerical error, the sensitivity of the solution to parameters associated with input data, boundary condition uncertainty, and mathematical models is critical. Additionally, the ability to evaluate and or approximate the model efficiently, to allow development of a reasonable level of statistical diagnostics of the mathematical model and the physical system, is of central importance. In this study we report on initial efforts to apply integrated adjoint-based computational analysis and automatic differentiation tools to begin to address these issues. The study is carried out in the context of a Reynolds averaged Navier–Stokes approximation to turbulent fluid flow and heat transfer using a particular spatial discretization based on implicit fully-coupled stabilized FE methods. Initial results are presented that show the promise of these computational techniques in the context of nuclear reactor relevant prototype thermal-hydraulics problems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

FORWARD MODELING CAVITY DENSITY: A MULTI-INSTRUMENT DIAGNOSTIC

The thermodynamic properties of coronal prominence cavities present a unique probe into the energy and mass budget of prominences. Using a three-dimensional morphological model, we forward model the polarization brightness and extreme-ultraviolet (EUV) emission of a cavity and its surrounding streamer. Using a genetic algorithm, we find the best-fit density model by comparing the models to Mauna Loa Solar Observatory MK4 and Hinode EUV Imaging Spectrometer data. The effect of temperature variations on the derived density is also measured. We have measured the density inside a cavity down to 1.05 R{sub sun} with height-dependent error bars. Our forward modeling technique compensates for optically thin projection effects. This method provides a complementary technique to traditional line ratio diagnostics that is useful for diffuse off-limb coronal structures.

79 ASTRONOMY AND ASTROPHYSICS↗

Summary Report of Working Group 1: Laser-Plasma Acceleration

Advances in and physics of the acceleration of particles using underdense plasma structures driven by lasers were the topics of presentations and discussions in Working Group 1 of the 2010 Advanced Accelerator Concepts Workshop. Such accelerators have demonstrated gradients several orders beyond conventional machines, with quasi-monoenergetic beams at MeV-GeV energies, making them attractive candidates for next generation accelerators. Workshop discussions included advances in control over injection and laser propagation to further improve beam quality and stability, detailed diagnostics and physics models of the acceleration process, radiation generation as a source and diagnostic, and technological tools and upcoming facilities to extend the reach of laser-plasma accelerators.

43 PARTICLE ACCELERATORS↗

Radiative transfer in circumstellar 1612 MHz OH masers

A detailed investigation of radiative transfer in the 1612 MHz OH maser in the expanding envelopes around evolved stars is made in the context of the standard model in which the mass outflow is windlike. The most sensitive diagnostic of the models is the maser emission at the velocity of the star for which VLA and MERLIN data exist. Fully saturated models are analytically eliminated. Detailed numerical modeling also eliminates partially saturated models. The need to examine alternative models for the mass outflow is suggested by this conclusion. A model for the mass outflow from these stars is advocated in which all mass is lost by the ejection of blobs of material. These blobs, acted on by radiation pressure on grains, evolve into platelike structures in the OH maser region. It is shown that the peculiar difficulties of the standard model for the OH masers do not occur in this picture.

Alcock, C.↗

Summary Report of Working Group 1: Laser-Plasma Acceleration

Advances in and physics of the acceleration of particles using underdense plasma structures driven by lasers were the topics of presentations and discussions in Working Group 1 of the 2010 Advanced Accelerator Concepts Workshop. Such accelerators have demonstrated gradients several orders beyond conventional machines, with quasi-monoenergetic beams at MeV-GeV energies, making them attractive candidates for next generation accelerators. Workshop discussions included advances in control over injection and laser propagation to further improve beam quality and stability, detailed diagnostics and physics models of the acceleration process, radiation generation as a source and diagnostic, and technological tools and upcoming facilities to extend the reach of laser-plasma accelerators.

43 PARTICLE ACCELERATORS↗

An architecture for the development of real-time fault diagnosis systems using model-based reasoning

Presented here is an architecture for implementing real-time telemetry based diagnostic systems using model-based reasoning. First, we describe Paragon, a knowledge acquisition tool for offline entry and validation of physical system models. Paragon provides domain experts with a structured editing capability to capture the physical component's structure, behavior, and causal relationships. We next describe the architecture of the run time diagnostic system. The diagnostic system, written entirely in Ada, uses the behavioral model developed offline by Paragon to simulate expected component states as reflected in the telemetry stream. The diagnostic algorithm traces causal relationships contained within the model to isolate system faults. Since the diagnostic process relies exclusively on the behavioral model and is implemented without the use of heuristic rules, it can be used to isolate unpredicted faults in a wide variety of systems. Finally, we discuss the implementation of a prototype system constructed using this technique for diagnosing faults in a science instrument. The prototype demonstrates the use of model-based reasoning to develop maintainable systems with greater diagnostic capabilities at a lower cost.

Hall, Gardiner A.↗

FY2018 Report on Fission Chamber Development at LANL

This report provides a description of a subset of FY18 activities conducted by Los Alamos National Laboratory (LANL) as part of the Nuclear Physics: Cumulative Fission Product Yields (Fission R-values) task of the NA-22 sponsored F2016 Venture Project. Specifically, this report describes the design, fabrication and testing of the Mark II fission chamber that was fielded as part of fission R-value measurements on the Flattop critical assembly located at the National Criticality Experiments Research Center (NCERC). Historically, fission product R-value measurements were performed by chemical separation and beta counting of samples from carefully controlled fission chamber experiments. These measurements form the basis for reporting data used in debris diagnostics and subsequent modeling. It was also the means to extract absolute cumulative fission product yields (yield per fission or $Y_i/f$ for the $i_{th}$ fission product) that are included in the international nuclear data libraries, and ultimately used in diagnostic evaluations and device modeling. The challenge for this effort was to design a functional fission chamber given the harsh neutron and gamma fields and severe space limitations of the Flattop critical assembly.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluating cloud feedbacks and rapid responses in the ACCESS model

A cloud feedback diagnostic package is implemented in the Australian Community Climate and Earth-System Simulator General Circulation Model, based on the methodology of “cloud radiative kernels.” Using separate increased sea surface temperature and CO 2 experiments, both the “rapid response” cloud contribution to forcing and temperature-mediated cloud feedbacks are analyzed. Under increased temperature and CO 2 changes, temperature-mediated cloud radiative feedback dominates over the rapid response in the final radiative response. Cloud feedback is positive in both long and short wave, with short wave dominating global values. Contributing most to this are low to mid-level clouds, of medium-to-high optical thickness. As a means of illustration of the methodology, a number of key parameters related to clouds, precipitation, and convection that are typically used in “tuning” in the model are modified. These changes result in substantial impacts on the model's current climate, but only modest changes to rapid response and feedbacks occur globally, regionally, and as a function of cloud optical thickness and height. This limited set of experiments shows that cloud adjustments and feedbacks in this model are robust under these changes, lending confidence that both model climate change projections and the conclusions of attribution studies are not overly sensitive to such parameterization tuning. Of course, a considerably larger set of experiments would be needed to demonstrate that feedbacks and rapid response are robust under the wider set of tuning adjustments commonly undertaken.

54 ENVIRONMENTAL SCIENCES↗

Exploratory Precipitation Metrics: Spatiotemporal Characteristics, Process-Oriented, and Phenomena-Based

Abstract Precipitation sustains life and supports human activities, making its prediction one of the most societally relevant challenges in weather and climate modeling. Limitations in modeling precipitation underscore the need for diagnostics and metrics to evaluate precipitation in simulations and predictions. While routine use of basic metrics is important for documenting model skill, more sophisticated diagnostics and metrics aimed at connecting model biases to their sources and revealing precipitation characteristics relevant to how model precipitation is used are critical for improving models and their uses. This paper illustrates examples of exploratory diagnostics and metrics including 1) spatiotemporal characteristics metrics such as diurnal variability, probability of extremes, duration of dry spells, spectral characteristics, and spatiotemporal coherence of precipitation; 2) process-oriented metrics based on the rainfall–moisture coupling and temperature–water vapor environments of precipitation; and 3) phenomena-based metrics focusing on precipitation associated with weather phenomena including low pressure systems, mesoscale convective systems, frontal systems, and atmospheric rivers. Together, these diagnostics and metrics delineate the multifaceted and multiscale nature of precipitation, its relations with the environments, and its generation mechanisms. The metrics are applied to historical simulations from phases 5 and 6 of the Coupled Model Intercomparison Project. Models exhibit diverse skill as measured by the suite of metrics, with very few models consistently ranked as top or bottom performers compared to other models in multiple metrics. Analysis of model skill across metrics and models suggests possible relationships among subsets of metrics, motivating the need for more systematic analysis to understand model biases for informing model development.

54 ENVIRONMENTAL SCIENCES↗

2D full wave modeling for a synthetic Doppler backscattering diagnostic

Doppler backscattering (DBS) is a plasma diagnostic used in tokamaks and other magnetic confinement devices to measure the fluctuation level of intermediate wavenumber (k{sub {theta}}{rho}{sub s}{approx} 1) density fluctuations and the lab frame propagation velocity of turbulence. Here, a synthetic DBS diagnostic is described, which has been used for comparisons between measurements in the DIII-D tokamak and predictions from nonlinear gyrokinetic simulations. To estimate the wavenumber range to which a Gaussian beam would be sensitive, a ray tracing code and a 2D finite difference, time domain full wave code are used. Experimental density profiles and magnetic geometry are used along with the experimental antenna and beam characteristics. An example of the effect of the synthetic diagnostic on the output of a nonlinear gyrokinetic simulation is presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A quasi-Lagrangian diagnostic case study of the effect of satellite sounding data assimilation on model cyclone prediction

A quasi-Lagrangian diagnostic study was performed to compare weather forecast accuracy with and without use of satellite data. Attention was focused on the mass and angular momentum budgets of the cyclone. The diagnostic study isolated the effects of physical processes within a cyclone and the effects of transport processes moving with the cyclone. Satellite data furnished different initialization values for horizontal mass and eddy angular momentum. Colder temperatures and weaker stabilities in the NW quadrant lower layers in the budget volume and increased stability in the middle and lower layers of another quadrant were obtained when the satellite data were considered. The addition of satellite data was concluded to have enhanced the accuracy of the forecast.

Vergin, J. M.↗

Diagnosis of the Marine Low Cloud Simulation in the NCAR Community Earth System Model (CESM) and the NCEP Global Forecast System (GFS)-Modular Ocean Model v4 (MOM4) coupled model

We present a diagnostic analysis of the marine low cloud climatology simulated by two state-of-the-art coupled atmosphere-ocean models: the NCAR Community Earth System Model (CESM) and the NCEP Global Forecasting System (GFS). In both models, the shallow convection and boundary layer turbulence parameterizations have been recently updated: both models now use a mass-flux scheme for the parameterization of shallow convection, and a turbulence parameterization capable of handling Stratocumulus (Sc)-topped Planetary Boundary Layers (PBLs). For shallow convection, both models employ a convective trigger function based on the concept of convective inhibition and both include explicit convective overshooting/penetrative entrainment formulation. For Sc-topped PBL, both models treat explicitly turbulence mixing and cloud-top entrainment driven by cloud-top radiative cooling. Our focus is on the climatological transition from Sc to shallow Cumulus (Cu)-topped PBL in the subtropical eastern oceans. We show that in the CESM the coastal Sc-topped PBLs in the subtropical Eastern Pacific are well-simulated but the climatological transition from Sc to shallow Cu is too abrupt and happens too close to the coast. By contrast, in the GFS coupled simulation the coastal Sc amount and PBL depth are severely underestimated while the transition from Sc to shallow Cu is ³delayed² and offshore Sc cover is too extensive in the subtropical Eastern Pacific. We discuss the possible connections between such differences in the simulations and differences in the parameterizations of shallow convection and boundary layer turbulence in the two models.

Xiao, Heng↗