Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Control of multiple resonant power processors in a multi-source system

Analysis and test results show that phasor-regulated, Mapham-derived resonant inverters can be paralleled to provide standardizing interfaces for multiple sources on a utility-type, aerospace power distribution bus. The basic sources do not require matching in any way, and may have grossly different characteristics. Fully stable system architectures with multiple sources, parallel/redundant distribution buses, and a wide variety of loads can be easily constructed and controlled. The commands and parameters available for system control allow for tight tolerance bus voltage control, and absolute power-sharing control from the various sources over the full range of possible source and load variations. That level of control enables simplified load power processing hardware and the distribution of losses to optimally load the source thermal control system. Positive control of all system performance and allocation of losses are not required by all missions or vehicles, and overall vehicle considerations do not always require the loads on vehicle energy sources and thermal control systems to be balanced. In those cases, power system control can be simplified, and a hierarchical set of defaults can be substituted for computer-generated or supervisory input commands to allow for stable, fully autonomous system operation.

Mildice, James↗

Multiple vs single scattering - Assessment of magnitudes

All orders of scattering are analyzed for two artifical canopies. The SHL canopy consists of Small Horizontal Leaves that are much smaller than the leaf-to-leaf spacing. The IHL canopy consists of Infinite Horizontal Layers, where each leaf is of infinite extent (a horizontal plane). Hemispheric leaf reflectances and transmittances independent of the direction of illumination lead to exact solutions for these models. Sunlight that penetrates to a given leaf area index level is much stronger in an SHL canopy than that in IHL; but the difference becomes muted when leaf transmittance is large. Multiple scattering enhances the hemispheric canopy reflectance more strongly in SHL than it does in IHL. The enhancement depends linearly on leaf transmittance in SHL and on the transmittance squared in IHL. Comparison with measured reflectances indicates that IHL model grossly underestimates multiple scattering in soybean canopies.

Otterman, Joseph↗

A description of the correlated k distributed method for modeling nongray gaseous absorption, thermal emission, and multiple scattering in vertically inhomogeneous atmospheres

A radiative transfer method for treating nongray gaseous absorption and thermal emission in vertically inhomogeneous multiple scattering atmospheres is described. Probability density distributions of absorption coefficient strength are derived from line-by-line calculations to construct line-by-line and band model based k distributions. The monotonic ordering of absorption coefficient strengths in these k distributions implicitly preserves the monochromatic structure of the atmosphere at different pressure levels, thus simulating monochromatic spectral integration at a fraction of the line-by-line computing cost. The k distribution approach also permits accurate modeling of overlapping absorption by different atmospheric gases and accurate treatment of nongray absorption in multiple scattering media. It is shown that the correlated k distribution method is capable of achieving numerical accuracy to within 1 percent of cooling rates obtained with line-by-line calculations throughout the troposphere and most of the stratosphere.

Lacis, Andrew A.↗

Far-infrared properties of Markarian galaxies with multiple nuclei - Warm dust emission in mergers

An investigation of coadded IRAS data is performed on 187 Markarian galaxies where distinguishing morphological characteristics or multiple optical nuclei are present. The far-IR properties of Markarian galaxies are compared to the IRAS Bright Galaxy Sample, and a much higher median dust temperature is found in the multiple nucleus galaxies, suggesting that more far-IR luminosity results from active star formation. Both optical/UV and far-IR selection techniques are necessary to extract complete samples of AGNs since the far-IR two-color plane can miss up to 50 percent of the galaxies. A systematic increase in the contribution of warm dust emission due to active star formation and AGNs is found in a statistical comparison of merger candidates and other galaxy samples. The assumed nature of precursor galaxies determines the assumed enhancement of far-IR luminosity caused by galaxy collisions. A model is presented which describes the properties of the Markarian galaxies in terms of enhanced OB star formation and different grain size distributions. The results of the investigation are shown to be consistent with a 'subdued' interpretation of merging galaxies with high luminosities.

Mazzarella, Joseph M.↗

A general analysis of propagation along multiple-layer superconducting stripline and microstrip transmission lines

A rigorous spectral-domain formulation for a superconducting stripline or microstrip transmission line with a multiple-layer dielectric substrate is presented. The formulation models the strip conductor as a surface current with an equivalent surface impedance, where the surface impedance is approximated in closed form when the strip is either much thinner or much thicker than a penetration depth. In either case the surface impedance is related to the complex conductivity of the material, which is calculated from a two-fluid model. Results are presented to show the slow-wave propagation and attenuation along both microstrip and stripline packages in a realistic multiple-layer configuration, which accounts for the field penetration into the superconducting ground planes.

Nghiem, David↗

Multiple-Ring Digital Communication Network

Optical-fiber digital communication network to support data-acquisition and control functions of electric-power-distribution networks. Optical-fiber links of communication network follow power-distribution routes. Since fiber crosses open power switches, communication network includes multiple interconnected loops with occasional spurs. At each intersection node is needed. Nodes of communication network include power-distribution substations and power-controlling units. In addition to serving data acquisition and control functions, each node acts as repeater, passing on messages to next node(s). Multiple-ring communication network operates on new AbNET protocol and features fiber-optic communication.

Kirkham, Harold↗

A non-isotropic multiple-scale turbulence model

A newly developed non-isotropic multiple scale turbulence model (MS/ASM) is described for complex flow calculations. This model focuses on the direct modeling of Reynolds stresses and utilizes split-spectrum concepts for modeling multiple scale effects in turbulence. Validation studies on free shear flows, rotating flows and recirculating flows show that the current model perform significantly better than the single scale k-epsilon model. The present model is relatively inexpensive in terms of CPU time which makes it suitable for broad engineering flow applications.

Chen, C. P.↗

Multiple-access phased array antenna simulator for a digital beam forming system investigation

Future versions of data relay satellite systems are currently being planned by NASA. Being given consideration for implementation are on-board digital beamforming techniques which will allow multiple users to simultaneously access a single S-band phased array antenna system. To investigate the potential performance of such a system, a laboratory simulator has been developed at NASA's Lewis Research Center. This paper describes the system simulator, and in particular, the requirements, design, and performance of a key subsystem, the phased array antenna simulator, which provides realistic inputs to the digital processor including multiple signals, noise, and nonlinearities.

Kerczewski, Robert J.↗

Liquid hydrogen mass flow through a multiple orifice Joule-Thomson device

Liquid hydrogen mass flow rate, pressure drop, and temperature drop data were obtained for a number of multiple orifice Joule-Thomas devices known as visco jets. The present investigation continues a study to develop an equation for predicting two phase flow of cryogens through these devices. The test apparatus design allowed isenthalpic expansion of the cryogen through the visco jets. The data covered a range of inlet and outlet operating conditions. The mass flow rate range single phase or two phase was 0.015 to 0.98 lbm/hr. The manufacturer's equation was found to overpredict the single phase hydrogen data by 10 percent and the two phase data by as much as 27 percent. Two modifications of the equation resulted in a data correlation that predicts both the single and two phase flow across the visco jet. The first modification was of a theoretical nature, and the second strictly empirical. The former reduced the spread in the two phase data. It was a multiplication factor of 1 - X applied to the manufacturer's equation. The parameter X is the flow quality downstream of the visco jet based on isenthalpic expansion across the device. The latter modification was a 10 percent correction term that correlated 90 percent of the single and two phase data to within +/- 10 percent scatter band.

Papell, S. Stephen↗

A satellite mobile communication system based on Band-Limited Quasi-Synchronous Code Division Multiple Access (BLQS-CDMA)

Discussed here is a new approach to code division multiple access applied to a mobile system for voice (and data) services based on Band Limited Quasi Synchronous Code Division Multiple Access (BLQS-CDMA). The system requires users to be chip synchronized to reduce the contribution of self-interference and to make use of voice activation in order to increase the satellite power efficiency. In order to achieve spectral efficiency, Nyquist chip pulse shaping is used with no detection performance impairment. The synchronization problems are solved in the forward link by distributing a master code, whereas carrier forced activation and closed loop control techniques have been adopted in the return link. System performance sensitivity to nonlinear amplification and timing/frequency synchronization errors are analyzed.

Degaudenzi, R.↗

Multiple access capacity trade-offs for a Ka-band personal access satellite system

System capability is critical to the economic viability of a personal satellite communication system. Ka band has significant potential to support a high capacity multiple access system because of the availability of bandwidth. System design tradeoffs are performed and multiple access schemes are compared with the design goal of achieving the highest capacity and efficiency. Conclusions regarding the efficiency of the different schemes and the achievable capacities are given.

Dessouky, Khaled↗

Measurement of multiple scattering effects with a polarization Raman elastic-backscatter lidar

A new method for the determination of multiple scattering effects is described. A polarization Raman elastic backscatter lidar is used, which allows the measurement of the depolarization of both the elastically backscattered light and the light Raman scattered from nitrogen molecules. With this technique the depolarization effect due to multiple scattering can be separated from single scattering polarization. Presented here are a short discussion of the idea and a measurement example.

Wandinger, Ulla↗

Multiple scattering wavelength dependent backscattering of kaolin dust in the IR: Measurements and theory

Knowing the optical properties of aerosol dust is important for designing electro-optical systems and for modeling the effect on propagation of light in the atmosphere. As CO2 lidar technology becomes more advanced and is used for multiwavelength measurements, information on the wavelength dependent backscattering of aerosol dust particles is required. The volume backscattering coefficient of aerosols in the IR is relatively small. Thus, only a few field measurements of backscattering, usually at only a few wavelengths, are reported in the literature. We present spectral field measurements of backscattering of kaolin dust in the 9-11 micron wavelength range. As the quantity of dust increases, multiple scattering contributes more to the measured backscattered signal. The measurements show the effect of the dust quantity of the spectral backscatter measurements. A simple analytical two stream radiative transfer model is applied to confirm the measurements and to give insight to the multiple scattering spectra of backscattering.

Ben-David, Avishai↗

The multiple-function multi-input/multi-output digital controller system for the AFW wind-tunnel model

A real time multiple-function digital controller system was developed for the Active Flexible Wing (AFW) Program. The digital controller system (DCS) allowed simultaneous execution of two control laws: flutter suppression and either roll trim or a rolling maneuver load control. The DCS operated within, but independently of, a slower host operating system environment, at regulated speeds up to 200 Hz. It also coordinated the acquisition, storage, and transfer of data for near real time controller performance evaluation and both open- and closed-loop plant estimation. It synchronized the operation of four different processing units, allowing flexibility in the number, form, functionality, and order of control laws, and variability in the selection of the sensors and actuators employed. Most importantly, the DCS allowed for the successful demonstration of active flutter suppression to conditions approximately 26 percent (in dynamic pressure) above the open-loop boundary in cases when the model was fixed in roll and up to 23 percent when it was free to roll. Aggressive roll maneuvers with load control were achieved above the flutter boundary. The purpose here is to present the development, validation, and wind tunnel testing of this multiple-function digital controller system.

Hoadley, Sherwood T.↗

Multiple Stokes wavelength generation in H2, D2, and CH4 for lidar aerosol measurements

Experimental results are reported of multiple Stokes generation of a frequency-doubled Nd:YAG laser in H2, D2, and CH4 in a focusing geometry. The energies at four Stokes orders were measured as functions of pump energy and gas pressure. The characteristics of the Stokes radiation generated in these gases are compared for optical production of multiple wavelengths. The competition between Raman components is analyzed in terms of cascade Raman scattering and four-wave mixing. The results indicate the possibility of using these generation processes for atmospheric aerosol measurements by means of multiwavelength lidar systems. Also, this study distinguishes between the gases, as regards the tendency to produce several wavelengths (H2,D2) versus the preference to produce mainly first Stokes radiation (CH4).

Chu, Zhiping↗

Multiple resonant scattering in the Compton upscatter model of gamma-ray bursts

Resonant Compton scattering, an increasingly popular mechanism for suppressing X-rays and producing gamma rays, must be treated as a multiple-scattering process for conditions thought characteristic of gamma-ray bursts. Photons that multiply scatter with a beamed power-law electron distribution in a uniform magnetic field produce a flat spectrum between the cyclotron frequency and an optical-depth-dependent critical energy; this critical energy ranges between several hundred keV and several MeV. Above this critical energy, the gamma-ray spectrum has a shape determined by the electron distribution and described by a single-scattering model. Only electron distributions that are nearly proportional to the electron momentum are able to simultaneously suppress X-rays and produce a single-scattering spectrum. As the Thomson optical depth approaches unity, photons that experience multiple scatterings often spawn additional photons at a rate that makes the model unphysical.

Brainerd, J. J.↗

Electrostatic turbulence in the earth's central plasma sheet produced by multiple-ring ion distributions

Attention is given to a mechanism to generate a broad spectrum of electrostatic turbulence in the quiet time central plasma sheet (CPS) plasma. It is shown theoretically that multiple-ring ion distributions can generate short-wavelength (less than about 1), electrostatic turbulence with frequencies less than about kVj, where Vj is the velocity of the jth ring. On the basis of a set of parameters from measurements made in the CPS, it is found that electrostatic turbulence can be generated with wavenumbers in the range of 0.02 and 1.0, with real frequencies in the range of 0 and 10, and with linear growth rates greater than 0.01 over a broad range of angles relative to the magnetic field (5-90 deg). These theoretical results are compared with wave data from ISEE 1 using an ion distribution function exhibiting multiple-ring structures observed at the same time. The theoretical results in the linear regime are found to be consistent with the wave data.

Huba, J. D.↗

Orbit determination by solving for gravity parameters with multiple arc data

The orbit of a satellite that repeats in the earth fixed coordinates is determined by combining GPS tracking data from multiple arcs. The satellite dynamics are modeled with the epoch state and a set of parameters, called the bin parameters, that account for the effect of the local gravitational field on the satellite current state. The epoch state is specific to each arc, and the bin parameters are common to all repeat arcs. The estimation algorithm is based on the Square Root Information Filter. It involves partitioning of the measurement matrix and use of the Householder transformation to combine multiple arc data and solve for the epoch states and the bin parameters. The bin parameters can then be converted into the earth's gravitational field with a modest amount of computation.

Wu, Jiun-Tsong↗