Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple crystal forms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Crystal structures and functional analysis of the ZnF5-WWE1-WWE2 region of PARP13/ZAP define a distinctive mode of engaging poly(ADP-ribose)

PARP13/ZAP (zinc-finger antiviral protein) acts against multiple viruses by promoting degradation of viral mRNA. PARP13 has four N-terminal zinc (Zn) fingers that bind CG-rich nucleotide sequences, a C-terminal ADP ribosyltransferase fold, and a central region with a fifth Zn finger and tandem WWE domains. The central PARP13 region, ZnF5-WWE1-WWE2, is implicated in binding poly(ADP-ribose); however, there are limited insights into its structure and function. We present crystal structures of ZnF5-WWE1-WWE2 from mouse PARP13 in complex with ADP-ribose and in complex with ATP. The crystal structures and binding studies demonstrate that WWE2 interacts with ADP-ribose and ATP, whereas WWE1 does not have a functional binding site. Binding studies with poly(ADP-ribose) ligands indicate that WWE2 serves as an anchor for preferential binding to the terminal end of poly(ADP-ribose) chains. The composite ZnF5-WWE1-WWE2 structure forms an extended surface to engage ADP-ribose chains, representing a distinctive mode of recognition that provides a framework for investigating the impact of poly(ADP-ribose) on PARP13 function.

59 BASIC BIOLOGICAL SCIENCES↗

Aperiodically ordered nano-graphene on the quasicrystalline substrate

Designing exotic structures in low dimensions is key in today's quest to tailor novel quantum states in materials with unique symmetries. Particularly intriguing materials in this regard are low dimensional aperiodic structures with non-conventional symmetries that are otherwise forbidden in translation symmetric crystals. In our work, we focus on the link between the structural and electronic properties of aperiodically ordered aromatic molecules on a quasicrystalline surface, which has largely been neglected so far. As an exemplary case, we investigate the self-assembly and the interfacial electronic properties of the nano-graphene-like molecule coronene on the bulk truncated icosahedral (i) Al–Pd–Mn quasicrystalline surface using multiple surface sensitive techniques. We find an aperiodically ordered coronene monolayer (ML) film on the i-Al–Pd–Mn surface that is characterized by the same local motifs of the P1 Penrose tiling model as the bare i-Al–Pd–Mn surface. The electronic valence band structure of the coronene/i-Al–Pd–Mn system is characterized by the pseudogap of thebare i-Al–Pd–Mn, which persists the adsorption of coronene confirming the quasiperiodic nature of the interface. In addition, we find a newly formed interface state of partial molecular character that suggests an at least partial chemical interaction between the molecule and the quasicrystalline surface. We propose that this partial chemical molecule–surface interaction is responsible for imprinting the quasicrystalline order of the surface onto the molecular film.

36 MATERIALS SCIENCE↗

NASA Tech Briefs, December 2005

Topics covered include: Video Mosaicking for Inspection of Gas Pipelines; Shuttle-Data-Tape XML Translator; Highly Reliable, High-Speed, Unidirectional Serial Data Links; Data-Analysis System for Entry, Descent, and Landing; Hybrid UV Imager Containing Face-Up AlGaN/GaN Photodiodes; Multiple Embedded Processors for Fault-Tolerant Computing; Hybrid Power Management; Magnetometer Based on Optoelectronic Microwave Oscillator; Program Predicts Time Courses of Human/ Computer Interactions; Chimera Grid Tools; Astronomer's Proposal Tool; Conservative Patch Algorithm and Mesh Sequencing for PAB3D; Fitting Nonlinear Curves by Use of Optimization Techniques; Tool for Viewing Faults Under Terrain; Automated Synthesis of Long Communication Delays for Testing; Solving Nonlinear Euler Equations With Arbitrary Accuracy; Self-Organizing-Map Program for Analyzing Multivariate Data; Tool for Sizing Analysis of the Advanced Life Support System; Control Software for a High-Performance Telerobot; Java Radar Analysis Tool; Architecture for Verifiable Software; Tool for Ranking Research Options; Enhanced, Partially Redundant Emergency Notification System; Close-Call Action Log Form; Task Description Language; Improved Small-Particle Powders for Plasma Spraying; Bonding-Compatible Corrosion Inhibitor for Rinsing Metals; Wipes, Coatings, and Patches for Detecting Hydrazines; Rotating Vessels for Growing Protein Crystals; Oscillating-Linear-Drive Vacuum Compressor for CO2; Mechanically Biased, Hinged Pairs of Piezoelectric Benders; Apparatus for Precise Indium-Bump Bonding of Microchips; Radiation Dosimetry via Automated Fluorescence Microscopy; Multistage Magnetic Separator of Cells and Proteins; Elastic-Tether Suits for Artificial Gravity and Exercise; Multichannel Brain-Signal-Amplifying and Digitizing System; Ester-Based Electrolytes for Low-Temperature Li-Ion Cells; Hygrometer for Detecting Water in Partially Enclosed Volumes; Radio-Frequency Plasma Cleaning of a Penning Malmberg Trap; Reduction of Flap Side Edge Noise - the Blowing Flap; and Preventing Accidental Ignition of Upper-Stage Rocket Motors.

Source record↗

Collective Interatomic Decay of Multiple Vacancies in Clusters

We predict that inner-shell ionization of more than one atom (or molecule) in a cluster, e.g., by intense free-electron laser radiation, can lead to an interatomic decay process in which the formed vacancy states decay simultaneously, while a neighboring neutral species is ionized. This collective decay phenomenon can be regarded as a transfer of two or more virtual photons from the ionized cluster units to a neutral one. Simulations of collective decay in (4s{sup -1}, 4s{sup -1}) (Kr{sup +}){sub 2}Ar show that the two-virtual-photon process can be competitive with the dissociative nuclear dynamics of the doubly ionized cluster. Generality of the collective interatomic decay is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rv2969c, essential for optimal growth in Mycobacterium tuberculosis, is a DsbA-like enzyme that interacts with VKOR-derived peptides and has atypical features of DsbA-like disulfide oxidases

The gene product of M. tuberculosis Rv2969c is shown to be a disulfide oxidase enzyme that has a canonical DsbA-like fold with novel structural and functional characteristics. The bacterial disulfide machinery is an attractive molecular target for developing new antibacterials because it is required for the production of multiple virulence factors. The archetypal disulfide oxidase proteins in Escherichia coli (Ec) are DsbA and DsbB, which together form a functional unit: DsbA introduces disulfides into folding proteins and DsbB reoxidizes DsbA to maintain it in the active form. In Mycobacterium tuberculosis (Mtb), no DsbB homologue is encoded but a functionally similar but structurally divergent protein, MtbVKOR, has been identified. Here, the Mtb protein Rv2969c is investigated and it is shown that it is the DsbA-like partner protein of MtbVKOR. It is found that it has the characteristic redox features of a DsbA-like protein: a highly acidic catalytic cysteine, a highly oxidizing potential and a destabilizing active-site disulfide bond. Rv2969c also has peptide-oxidizing activity and recognizes peptide segments derived from the periplasmic loops of MtbVKOR. Unlike the archetypal EcDsbA enzyme, Rv2969c has little or no activity in disulfide-reducing and disulfide-isomerase assays. The crystal structure of Rv2969c reveals a canonical DsbA fold comprising a thioredoxin domain with an embedded helical domain. However, Rv2969c diverges considerably from other DsbAs, including having an additional C-terminal helix (H8) that may restrain the mobility of the catalytic helix H1. The enzyme is also characterized by a very shallow hydrophobic binding surface and a negative electrostatic surface potential surrounding the catalytic cysteine. The structure of Rv2969c was also used to model the structure of a paralogous DsbA-like domain of the Ser/Thr protein kinase PknE. Together, these results show that Rv2969c is a DsbA-like protein with unique properties and a limited substrate-binding specificity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetic and Structural Analysis of Substrate Specificity in Two Copper Amine Oxidases from Hansenula polymorpha

The structural underpinnings of enzyme substrate specificity are investigated in a pair of copper amine oxidases (CAOs) from Hansenula polymorpha (HPAO-1 and HPAO-2). The X-ray crystal structure (to 2.0 {angstrom} resolution) and steady state kinetic data of the second copper amine oxidase (HPAO-2) are presented for comparison to those of HPAO-1. Despite 34% sequence identity and superimposable active site residues implicated in catalysis, the enzymes vary considerably in their substrate entry channel. The previously studied CAO, HPAO-1, has a narrow substrate channel. In contrast, HPAO-2 has a wide funnel-shaped substrate channel, which also contains a side chamber. In addition, there are a number of amino acid changes within the channels of HPAO-2 and HPAO-1 that may sterically impact the ability of substrates to form covalent Schiff base catalytic intermediates and to initiate chemistry. These differences can partially explain the greatly different substrate specificities as characterized by k{sub cat}/K{sub m} value differences. In HPAO-1, the k{sub cat}/K{sub m} for methylamine is 330-fold greater than for benzylamine, whereas in HPAO-2, it is benzylamine that is the better substrate by 750-fold. In HPAO-2, an inflated {sup D}k{sub cat}/K{sub m}(methylamine) in relation to {sup D}k{sub cat}/K{sub m}(benzylamine) indicates that proton abstraction has been impeded more than substrate release. In HPAO-1, {sup D}k{sub cat}/K{sub m}(S) changes little with the slow substrate and indicates a similar increase in the energy barriers that control both substrate binding and subsequent catalysis. In neither case is k{sub cat}/K{sub m} for the second substrate, O{sub 2}, significantly altered. These results reinforce the modular nature of the active sites of CAOs and show that multiple factors contribute to substrate specificity and catalytic efficiency. In HPAO-1, the enzyme with the smaller substrate binding pocket, both initial substrate binding and proton loss are affected by an increase in substrate size, while in HPAO-2, the enzyme with the larger substrate binding pocket, the rate of proton loss is differentially affected when a phenyl substituent in the substrate is reduced to the size of a methyl group.

36 MATERIALS SCIENCE↗

Structure of Hepatitis C virus envelope glycoprotein E1 antigenic site 314–324 in complex with antibody IGH526

Hepatitis C virus (HCV) is a positive-strand RNA virus within the Flaviviridae family. The viral “spike” of HCV is formed by two envelope glycoproteins, E1 and E2, which together mediate viral entry by engaging host receptors and undergoing conformational changes to facilitate membrane fusion. While E2 can be readily produced in the absence of E1, E1 cannot be expressed without E2 and few reagents, including monoclonal antibodies, are available for study of this essential HCV glycoprotein. A human MAb to E1, IGH526, was previously reported to cross-neutralize different HCV isolates and, therefore, we sought to further characterize the IGH526 neutralizing epitope to obtain information for vaccine design. Here, we found that MAb IGH526 bound to a discontinuous epitope, but with a major component corresponding to E1 residues 314-324. The crystal structure of IGH526 Fab with this E1 glycopeptide at 1.75Å resolution revealed that the antibody binds to one face of an α-helical peptide. Single mutations on the helix substantially lowered IGH526 binding but did not affect neutralization, indicating either that multiple mutations are required or that additional regions are recognized by the antibody in the context of the membrane-associated envelope oligomer. Finally, molecular dynamics simulations indicate the free peptide is flexible in solution, suggesting that it requires stabilization for use as a candidate vaccine immunogen.

59 BASIC BIOLOGICAL SCIENCES↗

Characterisation of weld zone reactions in dissimilar glass-to-aluminium pulsed picosecond laser welds

Precision welded joints, produced between fused silica glass and aluminium by a newly-developed picosecond-pulse laser technique, have been analysed for the first time using a full range of electron microscopy methods. The welds were produced as lap joints by focusing a 1.2 μm diameter laser beam through the transparent glass top sheet, slightly below the surface of the metal bottom sheet. Despite the extremely short interaction time, extensive reaction was observed in the weld zone, which involved the formation of nanocrystalline silicon and at least two transitional alumina phases, γ- and δ-Al{sub 2}O{sub 3}. The weld formation process was found to be complex and involved: the formation of a constrained plasma cavity at the joint interface, non-linear absorption in the glass, and the creation of multiple secondary keyholes in the metal substrate by beam scattering. The joint area was found to expand outside of the main interaction volume, as the energy absorbed into the low conductivity and higher melting point silica glass sheet melted the aluminium surface across a wider contact area. The reasons for the appearance of nanocrystalline Si and transitional alumina reaction products within the welds are discussed. - Highlights: •Pulsed laser welding of dissimilar materials causes extensive chemical reactivity. •Metastable Al{sub 2}O{sub 3} phases form due to laser-induced highly-transient thermal regime. •Fused silica is reduced by Al to form nanocrystalline Si. •Mechanism of joint formation is discussed.

36 MATERIALS SCIENCE↗

Spin–glass transition in La{sub 0.75}Sr{sub 0.25}Mn{sub 0.5}Cr{sub 0.5−x}Al{sub x}O{sub 3−δ} perovskites

Graphical abstract: In-phase and out-of-phase ac susceptibility measurements at the magnetic field 1000 Oe show the shifting of transition temperature with frequency (i.e. spin–glass transition) in La{sub 0.75}Sr{sub 0.25}Mn{sub 0.5}Cr{sub 0.3}Al{sub 0.2}O{sub 3−δ}. - Highlights: • Spin–glass transition at low temperature (around 50 K). • Al-doping decreases the antiferromagnetic transition temperature. • Ferromagnetic around room temperature. - Abstract: The structural and magnetic properties of the Al-doped La{sub 0.75}Sr{sub 0.25}Mn{sub 0.5}Cr{sub 0.5−x}Al{sub x}O{sub 3−δ} (x = 0.0, 0.1, 0.2, 0.3) were investigated by X-ray powder diffraction, neutron powder diffraction and magnetization measurements. Rietveld refinement of the diffraction data confirms that the compounds crystallize in rhombohedral symmetry (space group, R-3C). Unit cell volume decreases with increasing concentration of Al at the B-site. Upon cooling from room temperature, we have observed multiple magnetic phase transitions, i.e. paramagnetic (PM), ferromagnetic (FM), antiferromagnetic (AFM) and spin–glass (SG), in the samples. A low temperature magnetic hysteresis study demonstrates the presence of ferromagnetic domains for all compositions. The antiferromagnetic transition temperature decreases with the Al-doping AC susceptibility measurements at 97 Hz and 1 Oe show SG behaviors with a spin-freezing temperature close to 50 K for all samples. The in-phase ac susceptibility (χ{sup /}) decreases in magnitude and spin–glass transition (T{sub SG}) increase toward higher temperature with increasing frequency. The spin–glass behavior accompanied by the anomalous magnetic transitions is due to the competing interactions between FM and AFM. The results also shows that a part of the samples lose magnetic order to form a SG state accompanied by an AFM state at low temperature.

36 MATERIALS SCIENCE↗

Bacteriochlorin syntheses - Status, problems, and exploration

Bacteriochlorins – Nature’s near-infrared (NIR) chromophores – are distinguished by an intense ([Formula: see text] ∼;10 5 M[Formula: see text]cm[Formula: see text] long-wavelength absorption band in the ∼;700–1000 nm. The development of routes to prepare synthetic, tailorable bacteriochlorins holds promise for multiple disciplines where NIR-light-promoted photoactivity is of interest. A de novo route to bacteriochlorins equipped with a stabilizing gem-dimethyl group in each pyrroline ring was discovered in 2003. Continued development in this arena over 20 years has led to additional routes as well as methods to install substituents at selected positions about the perimeter of the macrocycle. The present paper reports studies that highlight substantial limitations of existing synthetic routes, including stymied access to multi-bacteriochlorin arrays and the inability to install (in a rational way) distinct groups at opposite sides of the macrocycle. The origins of the limitations are traced to particular stages of the chemistry ranging from derivatizing pyrroles, creating pyrrolines, constructing and elaborating dihydrodipyrrins, coupling dihydrodipyrrins, and forming macrocycles. Through exploration of a dozen aspects of bacteriochlorin syntheses, 60 new compounds (and nine known compounds via improved syntheses) have been prepared and characterized; the data include 20 single-crystal X-ray diffraction analyses. The research taken together points to areas of focus to fulfill the promise of this fascinating class of compounds.

Chemistry↗

Optical signatures of low spin Fe 3+ in NAL at high pressure

The iron spin transition directly affects properties of lower mantle minerals and can thus alter geophysical and geochemical characteristics of the deep Earth. While the spin transition in ferropericlase has been documented at P ~60 GPa and 300 K, experimental evidence for spin transitions in other rock–forming minerals, such as bridgmanite and post–perovskite, remains controversial. Multiple valence, spin, and coordination states of iron in bridgmanite and post–perovskite are difficult to resolve with conventional spin probing techniques. Optical spectroscopy, on the other hand, can discriminate between high and low spin and between ferrous and ferric iron at different sites. Here we establish the optical signature of low spin Fe 3+ O 6 , a plausible low spin unit in bridgmanite and post–perovskite, by optical absorption experiments in diamond anvil cells. We show that the optical absorption of Fe 3+ O 6 in new aluminous phase (NAL) is very sensitive to the iron spin state and may represent a model behavior of bridgmanite and post–perovskite across the spin transition. Specifically, an absorption band centered at ~19,000 cm –1 is characteristic of the 2 T 2g → 2 T 1g ( 2 A 2g ) transition in low spin Fe 3+ in NAL at 40 GPa, constraining the crystal field splitting energy of low spin Fe 3+ to ~22,200 cm –1 , which we independently confirm by first–principles calculations. Together with available information on the electronic structure of Fe 3+ O 6 compounds, we show that the spin–pairing energy of Fe 3+ in an octahedral field is ~20,000–23,000 cm –1 . Furthermore, this implies that octahedrally coordinated Fe 3+ in bridgmanite is low spin at P > ~40 GPa.

58 GEOSCIENCES↗

Importance of Microbial Activity On Groundwater Iodate and Organo-Iodine Speciation and Mobility At Two DOE Sites

Iodine (I) occurs in multiple oxidation states in aquatic systems in the form of organic and inorganic species (iodide and iodate). This fact leads to complex biogeochemical cycling of Iodine and its long-lived isotope, 129 I, a major by-product of nuclear fission. Results from our newly developed, sensitive and rapid method for speciated isotopic ratios ( 129 I/ 127 I) via GC-MS, which compare favorably with Accelerator Mass Spectroscopy, demonstrate that the mobility of 129 I species greatly depends on the type of I species and its concentration, pH, and sediment redox state. At ambient concentrations (~10 7 M), I- and IO -3 are significantly retarded by sorption to mineral surfaces and covalent binding to aromatic moieties in natural organic matter (NOM), even when NOM is present at low concentrations such as occur at Hanford. At concentrations traditionally examined in sorption studies (≥ 10 -4 M), I- travels along with the water. Iodate removal can also occur through incorporation into CaCO 3 crystal lattice, e.g., at the Hanford Site. Removal of iodine from the groundwater through interaction with NOM is complicated by the release of mobile organo-I species, as was observed at SRS and Hanford. A small fraction of NOM that is bound to iodine can behave as a mobile organo-I source, a process that we were able to numerically simulate. Field and laboratory studies evaluating the cause for steady increases in 129 I concentrations (up to 1000 pCi L-1) emanating from radiological basins at SRS indicate that an increase of 0.7 pH units in groundwater over 17 years can account for the observed increased groundwater 129 I concentrations. Bacteria from a 129 I-contaminated aerobic aquifer at the F-area of SRS can accumulate I- at environmentally relevant concentrations (10 -7 M), and enzymatically oxidize I-, which together with microbially produced MnO 2 and superoxide or organic acids can significantly contribute to organo-iodine formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge transport through exciton shelves in cadmium chalcogenide quantum dot-DNA nano-bioelectronic thin films

Quantum dot (QD), or semiconductor nanocrystal, thin films are being explored for making solution-processable devices due to their size- and shape-tunable bandgap and discrete higher energy electronic states. While DNA has been extensively used for the self-assembly of nanocrystals, it has not been investigated for the simultaneous conduction of multiple energy charges or excitons via exciton shelves (ES) formed in QD-DNA nano-bioelectronic thin films. Here, we present studies on charge conduction through exciton shelves, which are formed via chemically coupled QDs and DNA, between electronic states of the QDs and the HOMO-LUMO levels in the complementary DNA nucleobases. While several challenges need to be addressed in optimizing the formation of devices using QD-DNA thin films, a higher charge collection efficiency for hot-carriers and our detailed investigations of charge transport mechanism in these thin films highlight their potential for applications in nano-bioelectronic devices and biological transducers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural Changes and Pb Mobility During the Zircon to Reidite Transformation: Implications for Planetary Impact Chronology

Impact events modify and leave behind a complex history of rock metamorphism on terrestrial planets. Evidence for an impact event may be recorded in physical changes to minerals, such as mineral deformation and formation of high P-T polymorphs, but also in the form of chemical fingerprints, such as enhanced elemental diffusion and isotopic mixing. Here we explore laboratory shock-induced physical and chemical changes to zircon and feldspar, the former of which is of interest because its trace elements abundances and isotope ratios are used extensively in geochemistry and geochronology. To this end, a granular mixture of Bishop Tuff sanidine and Kuehl Lake zircon, both with well characterized Pb isotope compositions, was prepared and then shocked via a flat plate accelerator. The peak pressure of the experiment, as calculated by the impedance matching method, was ~24 GPa although a broader range of P-T conditions is anticipated due to starting sample porosity. Unshocked and shocked materials were characterized via scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and Raman spectroscopy. These methods show that the starting zircon material had abundant metamict regions, and the conversion of the feldspar to glass in the post-shock material. Analyses of the shocked product also yielded multiple occurrences of the high-pressure ZrSiO 4 polymorph reidite, with some domains up to 300 μm across. The possibility of U-Pb system disturbance was evaluated via laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) and secondary ion mass spectrometry (SIMS). The isotopic data reveal that disturbance of the U-Pb geochronometer in the reidite was minimal (<2% for the main U-Pb geochronometers). To better constrain the P-T conditions during the shock experiment, we complement impedance matching pressure calculations with iSALE2D impact simulations. The simulated results yield a range of P-T conditions experienced during the experiment and show that much of the sample may have reached >30 GPa, which is consistent with formation of reidite. In the recovered shocked material, we identified lamellae of reidite, some of which interlock with zircon lamellae. Reidite {112} twins were identified, which we interpret to have formed to reduce stress between the crystal structure of the host zircon and reidite. These two findings support the interpretation that shear transformation enabled the transition of zircon to reidite. The size and presence of reidite found here indicate that this phase is probably common in impact-shocked crustal rocks that experienced ~25 to ~35 GPa, especially when the target material has porosity. Additionally, shock loading of the zircon and transformation to reidite at these pressures in porous materials is unlikely to significantly disturb the U-Pb system in zircon and that the reidite inherits the primary U and Pb elemental and isotopic ratios from the zircon.

Bishop Tuff↗

Origins of low-symmetry phases in asymmetric diblock copolymer melts

Cooling disordered compositionally asymmetric diblock copolymers leads to the formation of nearly spherical particles, each containing hundreds of molecules, which crystallize upon cooling below the order–disorder transition temperature (T ODT ). Self-consistent field theory (SCFT) reveals that dispersity in the block degrees of polymerization stabilizes various Frank–Kasper phases, including the C14 and C15 Laves phases, which have been accessed experimentally in low-molar-mass poly(isoprene)-b-poly(lactide) (PI-PLA) diblock copolymers using thermal processing strategies. Heating and cooling a specimen containing 15% PLA above and below the TODT from the body-centered cubic (BCC) or C14 states regenerates the same crystalline order established at lower temperatures. This memory effect is also demonstrated with a specimen containing 20% PLA, which recrystallizes to either C15 or hexagonally ordered cylinders (HEX C ) upon heating and cooling. The process-path–dependent formation of crystalline order shapes the number of particles per unit volume, n/V, which is retained in the highly structured disordered liquid as revealed by small-angle X-ray scattering (SAXS) experiments. We hypothesize that symmetry breaking during crystallization is governed by the particle number density imprinted in the liquid during ordering at lower temperature, and this metastable liquid is kinetically constrained from equilibrating due to prohibitively large free energy barriers for micelle fusion and fission. Ordering at fixed n/V is enabled by facile chain exchange, which redistributes mass as required to meet the multiple particle sizes and packing associated with specific low-symmetry Frank–Kasper phases. Lastly, this discovery exposes universal concepts related to order and disorder in self-assembled soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys

High configurational entropies have been hypothesized to stabilize solid solutions in equiatomic, multi-element alloys which have attracted much attention recently as high-entropy alloys with potentially interesting properties. To evaluate the usefulness of configurational entropy as a predictor of single-phase (solid solution) stability, we prepared five new equiatomic, quinary alloys by replacing individual elements one at a time in a CoCrFeMnNi alloy that was previously shown to be single-phase [1]. An implicit assumption here is that, if any one element is replaced by another, while keeping the total number of elements constant, the configurational entropy of the alloy is unchanged; therefore, the new alloys should also be single-phase. Additionally, the substitute elements that we chose, Ti for Co, Mo or V for Cr, V for Fe, and Cu for Ni, had the same room-temperature crystal structure and comparable size/electronegativity as the elements being replaced to maximize solid solubility consistent with the Hume-Rothery rules. For comparison, the base CoCrFeMnNi alloy was also prepared. After three-day anneals at elevated temperatures, multiple phases were observed in all but the base CoCrFeMnNi alloy suggesting that, by itself, configurational entropy is generally not able to override competing driving forces that also govern phase stability. Thermodynamic analyses were carried out for each of the constituent binaries in the investigated alloys (Co-Cr, Fe-Ni, Mo-Mn, etc,). Experimental results combined with the thermodynamic analyses suggest that, in general, enthalpy and non-configurational entropy have bigger influences on phase stability in equiatomic, multi-component alloys. Only when the alloy microstructure is a single-phase, approximately ideal solid solution does the contribution of configurational entropy to the total Gibbs free energy become dominant. Thus, high configurational entropy provides a way to rationalize, after the fact, why a solid solution forms (if it forms) but it is not a useful a priori predictor of which of the so-called high-entropy alloys will form single-phase solid solutions.

High-entropy alloys↗

Carbon-related donor–acceptor pair transition in the infrared in h-BN

Experimental studies of intentionally doped impurities for the understanding of conductivity control in hexagonal boron nitride (h-BN) ultrawide bandgap (UWBG) semiconductor are limited but are highly desired for emerging applications of h-BN. We report synthesis by hydride vapor phase epitaxy and comparison photoluminescence (PL) emission spectroscopy studies of intentionally carbon (C)-doped and undoped h-BN semi-bulk crystals. In addition to the well-known C-related emission lines observed previously, a C-impurity-related transition near 1.31 eV consisting of multiple phonon replicas has been observed in C-doped h-BN at room temperature. Phonon replicas involved in the 1.31 eV emission have been identified using polarization resolve PL spectroscopy as the transverse acoustic (TA)/longitudinal acoustic (LA) and out-of-plane optical phonon (ZO) modes at the middle point, T, between the Γ- and K-points in the first Brillouin zone. Based on the agreement between the spectral peak position of the observed dominant emission line at 1.31 eV and the calculated energy-level separation between CB donor (carbon replacing boron) and Ci acceptor (carbon interstitial), the observed IR emission line can be decisively assigned to the donor–acceptor pair (DAP) transition involving the CB donor and Ci acceptor assisted by the intervalley (Κ → Μ) scattering processes. The results reinforce the perception that C impurities form deep-level centers and provided an improved understanding of C impurities in h-BN.

Physics↗