Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Accurate determination of ferric iron in garnets

Numerous techniques are available to determine the amount of Fe 2+ and Fe 3+ in minerals. Calculating Fe 2+ and Fe 3+ by charge-balance using electron probe microanalysis (EPMA) data is the most common method, but several studies question the usefulness and accuracy of this approach (Canil and O’Neill 1996; Dyar et al. 1993, 2012; Lalonde et al. 1998; Li et al. 2005; McGuire et al. 1989; Schingaro et al. 2016; Schmid et al. 2003; Sobolev et al. 2011). We compile and compare data for natural garnets that have been analyzed by both EPMA and Mössbauer spectroscopy. Comparison of Fe3+/ΣFe determined by charge-balance vs. Mössbauer spectroscopy shows an approximate 1:1 correlation. The EPMA data set of Dyar et al. (2012) is reexamined and it is shown that disagreement between EPMA and Mössbauer for their data is not nearly as bad as reported. Finally, data for charge-balance vs. Mössbauer spectroscopy are compared and show that the EPMA/charge-balance approach provides a suitable alternative when other methods are not practical.

58 GEOSCIENCES↗

A time-dependent momentum-resolved scattering approach to core-level spectroscopies

While new light sources allow for unprecedented resolution in experiments with X-rays, a theoretical understanding of the scattering cross-section is lacking. In the particular case of strongly correlated electron systems, numerical techniques are quite limited, since conventional approaches rely on calculating a response function (Kramers-Heisenberg formula) that is obtained from a perturbative analysis of scattering processes in the frequency domain. This requires a knowledge of a full set of eigenstates in order to account for all intermediate processes away from equilibrium, limiting the applicability to small tractable systems. In this work, we present an alternative paradigm, recasting the problem in the time domain and explicitly solving the time-dependent Schrödinger equation without the limitations of perturbation theory: a faithful simulation of the scattering processes taking place in actual experiments, including photons and core electrons. We show how this approach can yield the full time and momentum resolved Resonant Inelastic X-Ray Scattering (RIXS) spectrum of strongly interacting many-body systems. We demonstrate the formalism with an application to Mott insulating Hubbard chains using the time-dependent density matrix renormalization group method, which does not require a priory knowledge of the eigenstates and can solve very large systems with dozens of orbitals. This approach can readily be applied to systems out of equilibrium without modification and generalized to other spectroscopies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Novel Hyperbolization Procedure for The Two-Phase Six-Equation Flow Model

We introduce a novel approach for the hyperbolization of the well-known two-phase six-equation flow model. The six-equation model has been frequently used in many two-phase flow applications such as bubbly fluid flows in nuclear reactors. One major drawback of this model is that it can be arbitrarily non-hyperbolic resulting in difficulties such as numerical instability issues. Non-hyperbolic behavior can be associated with complex eigenvalues that correspond to characteristic matrix of the system. Complex eigenvalues are often due to certain flow parameter choices such as the definition of inter-facial pressure terms. In our method, we prevent the characteristic matrix receiving complex eigenvalues by fine tuning the inter-facial pressure terms with an iterative procedure. In this way, the characteristic matrix possesses all real eigenvalues meaning that the characteristic wave speeds are all real therefore the overall two-phase flowmodel becomes hyperbolic. The main advantage of this is that one can apply less diffusive highly accurate high resolution numerical schemes that often rely on explicit calculations of real eigenvalues. We note that existing non-hyperbolic models are discretized mainly based on low order highly dissipative numerical techniques in order to avoid stability issues.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Numerically Tracking Contact Discontinuities with an Introduction for GPU Programming

We review some of the classic numerical techniques used to analyze contact discontinuities and compare their effectiveness. Several finite difference methods (the Lax-Wendroff method, a Multidimensional Positive Definite Advection Transport Algorithm (MPDATA) method and a Monotone Upstream Scheme for Conservation Laws (MUSCL) scheme with an Artificial Compression Method (ACM)) as well as the finite element Streamlined Upwind Petrov-Galerkin (SUPG) method were considered. These methods were applied to solve the 2D advection equation. Based on our results we concluded that the MUSCL scheme produces the sharpest interfaces but can inappropriately steepen the solution. The SUPG method seems to represent a good balance between stability and interface sharpness without any inappropriate steepening. However, for solutions with discontinuities, the MUSCL scheme is superior. In addition, a preliminary implementation in a GPU program is discussed.

97 MATHEMATICS AND COMPUTING↗

PNNL Technical Support to The Implementation of EMTA and EMTA-NLA Models in Autodesk ® Moldflow ® Packages

Under the Predictive Engineering effort, PNNL developed linear and nonlinear property prediction models for long-fiber thermoplastics (LFTs). These models were implemented in PNNL’s EMTA and EMTA-NLA codes. While EMTA is a standalone software for the computation of the composites thermoelastic properties, EMTA-NLA presents a series of nonlinear models implemented in ABAQUS ® via user subroutines for structural analyses. In all these models, it is assumed that the fibers are linear elastic while the matrix material can exhibit a linear or typical nonlinear behavior depending on the loading prescribed to the composite. The key idea is to model the constitutive behavior of the matrix material and then to use an Eshelby-Mori-Tanaka approach (EMTA) combined with numerical techniques for fiber length and orientation distributions to determine the behavior of the as-formed composite. The basic property prediction models of EMTA and EMTA-NLA have been subject for implementation in the Autodesk ® Moldflow ® software packages. These models are the elastic stiffness model accounting for fiber length and orientation distributions, the fiber/matrix interface debonding model, and the elastic-plastic models. The PNNL elastic-plastic models for LFTs describes the composite nonlinear stress-strain response up to failure by an elastic-plastic formulation associated with either a micromechanical criterion to predict failure or a continuum damage mechanics formulation coupling damage to plasticity. All the models account for fiber length and orientation distributions as well as fiber/matrix debonding that can occur at any stage of loading. In an effort to transfer the technologies developed under the Predictive Engineering project to the American automotive and plastics industries, PNNL has obtained the approval of the DOE Office of Vehicle Technologies to provide Autodesk, Inc. with the technical support for the implementation of the basic property prediction models of EMTA and EMTA-NLA in the Autodesk ® Moldflow ® packages. This report summarizes the recent results from Autodesk Simulation Moldlow Insight (ASMI) analyses using the EMTA models and EMTA-NLA/ABAQUS ® analyses for further assessment of the EMTA-NLA models to support their implementation in Autodesk Moldflow Structural Alliance (AMSA). PNNL’s technical support to Autodesk, Inc. included (i) providing the theoretical property prediction models as described in published journal articles and reports, (ii) providing explanations of these models and computational procedure, (iii) providing the necessary LFT data for process simulations and property predictions, and (iv) performing ABAQUS/EMTA-NLA analyses to further assess and illustrate the models for selected LFT materials.

damage analysis↗

Strategy for Multi-Scale Single-Phase Flow Coupling

For practical nuclear engineering applications, multi-scale analysis by adopting the combined use of different scale computational tools, such as system thermal-hydraulics and CFD codes is vital when three-dimensional effects play an important role in the evolution of a given transient or accident scenario. The feasibility of coupling low-fidelity systems codes with higher fidelity CFD tools was demonstrated previously under NEAMS by coupling SAS4A/SASSYS-1 with the commercial CFD code STAR-CD and STAR-CCM+. An “adhoc” coupling strategy was implemented. With the advances in numerical techniques and software engineering, such as the availability of PETSc and MOOSE, modernization of existing systems codes or the development of new system code becomes more compelling. MOOSE (Multi-physics Object Oriented Simulation Environment) is a parallel computational framework developed at INL for enabling the solution of complex, fully-implicit multiphysics systems. It has been utilized in many nuclear applications including the system analysis codes RELAP-7 and the SFR module under current NEAMS Reactor Product Line (RPL). This motivates the development of a coupled scheme for MOOSE-based system analysis code and the commercial CFD code STAR-CCM+. STAR-CCM+ is a generalpurpose commercial CFD code using finite volume formulation for the analysis of compressible and incompressible flows and heat transfer, and it is being included in the toolkit of the NEAMS RPL. This investigation is important for the integration between the MOOSE-based system codes and the high-fidelity advanced simulation capabilities developed under the NEAMS RPL.

Hu, R.↗

Fundamental Studies of Fluid Mechanics: Stability in Porous Media

We summarize our research results in three main areas: coating flows; electrohydrodynamics of drops; and wetting and spreading of drops. Experimental, computational and analytical methods are used to address a variety of issues. Coating flow studies include the effect of roughness, surfactants, and adsorbed particles on the dynamics of dip-coating. Electrohydrodynamic studies include drop deformation in uniform electric fields, shape distortion due to charge convection in sedimenting drops, and driving chaotic advection by either an electric field inclined to the direction of drop motion or time-periodic changes in the direction of the electric field. Heat and mass transport from chaotically mixed droplets exhibit unexpected and remarkable increases in the rates of transport. Finally, we develop an analytical solution to the problem of a static droplet, and use numerical techniques to predict its migration due to surface tension gradients.

02 PETROLEUM↗

Radar Operation in a Hostile Electromagnetic Environment

Radar ISR does not always involve cooperative or even friendly targets. An adversary has numerous techniques available to him to counter the effectiveness of a radar ISR sensor. These generally fall under the banner of jamming, spoofing, or otherwise interfering with the EM signals required by the radar sensor. Consequently mitigation techniques are prudent to retain efficacy of the radar sensor. We discuss in general terms a number of mitigation techniques.

42 ENGINEERING↗

Some Notes on Neutron Up-Scattering and the Doppler-Broadening of High-Z Scattering Resonances

When neutrons are scattered by target nuclei at elevated temperatures, it is entirely possible that the neutron will actually gain energy (i.e., up-scatter) from the interaction. This phenomenon is in addition to the more usual case of the neutron losing energy (i.e., down-scatter). Furthermore, the motion of the target nuclei can also cause extended neutron down-scattering, i.e., the neutrons can and do scatter to energies lower than predicted by the simple asymptotic models. In recent years, more attention has been given to temperature-dependent scattering cross sections for materials in neutron multiplying systems. This has led to the inclusion of neutron up-scatter in deterministic codes like Partisn and to free gas scattering models for material temperature effects in Monte Carlo codes like MCNP and cross section processing codes like NJOY. The free gas scattering models have the effect of Doppler Broadening the scattering cross section output spectra in energy and angle. The current state of Doppler-Broadening numerical techniques used at Los Alamos for scattering resonances will be reviewed, and suggestions will be made for further developments. The focus will be on the free gas scattering models currently in use and the development of new models to include high-Z resonance scattering effects. These models change the neutron up-scattering behavior.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Performance and Reliability of Bonded Interfaces for High-temperature Packaging: Annual Progress Report

As maximum device temperatures approach 200 °Celsius, continuous operation, sintered silver materials promise to maintain bonds at these high temperatures without excessive degradation rates. A detailed characterization of the thermal performance and reliability of sintered silver materials and processes has been initiated for the next year. Future steps in crack modeling include efforts to simulate crack propagation directly using the extended finite element method (X-FEM), a numerical technique that uses the partition of unity method for modeling discontinuities such as cracks in a system.

30 DIRECT ENERGY CONVERSION↗

Numerical simulations of realistic grating compressors

Chirped pulse amplification (CPA), originally proposed by Strickland and Mourou, is a critical enabling technology for creating very short laser pulses with very high peak power. It consists of three optical components: a stretcher, an amplifier, and a compressor. An initial laser pulse of short duration and low energy content is first stretched out in time by the stretcher, resulting in a pulse with longer duration, low energy content, and very low peak power. The pulse is then amplified to increase its energy content without changing its duration in time. The amplified pulse is finally compressed in time in the compressor, resulting in a laser pulse with very short duration and very high peak power. The objective of this work is to develop numerical techniques that enable small-scale grating aberrations in the compressor to be analyzed through high performance computer simulations.

97 MATHEMATICS AND COMPUTING↗

From quarks to the cosmos: ab initio studies in nuclear physics

The study of nuclear physics is a central part of our quest to understand the nature of the Universe around us. At its core, nuclear physics emerges from the Standard Model of particle physics with the most important piece being the strong interaction that is described by Quantum Chromodynamics. However, the complexity of this theory results in severe computational difficulties that currently hinder the calculation of most quantities in nuclear physics directly from this underlying theory. The primary goal of my research is to address these issues by extending the numerical techniques of Lattice Quantum Chromodynamics (LQCD), applied successfully in particle physics, to the more intricate dynamics of nuclear physics, thereby providing an ab initio understanding of nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ROMULIS 1.01.00

The Reduced Order Modeling Unlimited Localized Interface Simulator (ROMULIS) is a set of toolbox scripts in MATLAB designed to perform nonlinear transient integration on a system of reduced order structural models that interact with each other at localized interfaces. ROMULIS is meant to provide a user-friendly interface for applying the latest developments in numerical techniques and modeling in structural dynamics analysis while also giving the freedom to implement new technologies from forthcoming research. This report documents how to use and interpret the toolbox scripts. The theory behind the code is given, followed by a manual for interacting with the scripts to perform simulations. Lastly, a high-level introduction that explains how the scripts interact with each other is given for aspiring developers.

97 MATHEMATICS AND COMPUTING↗

Parallelization and Performance Portability in Hydrodynamics Codes

With the eve of Exascale computing, performance and portability are at the forefront of all scientific codes. Adding more cores and more energy to a system is no longer a sustainable way to achieve performance, and extra effort must now be made to improve performance in all areas of code and code development. Using hydrodynamic codes as a basis, this work explores numerous techniques to achieve performance in different ways. Adaptive mesh refinement (AMR) is a necessary technique to improve memory optimization in mesh-based simulations. However it is invasive and conventionally difficult to integrate into existing applications, so we present a new branch of AMR to create a smooth transition to these optimizations, which not only improves performance, but also greatly reduces developer effort. We introduce the concept of this improvement as Phantom-Cell AMR, and assess theoretically the improvements, as well as present an application of its use. Other work included involves and investigation into an efficient data structure that ensures optimal memory layout for cache performance, with a target of making codes performant and portable across all architectures. All of the work targets both performance and portability, not just on CPU hardware, but specifically across GPU architectures. Parallel performance is key to all of the methods presented, but the research makes a great effort to improve the portability of all applications to prepare for current high performance computing systems and those on the horizon.

97 MATHEMATICS AND COMPUTING↗

Model Evaluation Report for LNG Dispersion on Fire Dynamics Simulator Version 6.5.3

This report is an assessment of the computational fluid dynamics (CFD) code Fire Dynamics Simulator (FDS), version 6.5.3, using the Model Evaluation Protocol (MEP) for Liquefied Natural Gas (LNG). The MEP consists of model validation and a scientific assessment that encompasses model information and model verification activities. Model validation entails comparison against various field and wind-tunnel trials for LNG and other dense gases with and without obstructions. The results indicate that FDS is generally over-predictive for most of the field scale dense gas releases and cases involving obstructions without requiring a safety factor of 2, however, since there are uncertainties in extrapolating to accident scales a safety factor of 2 (1/2 LFL criteria) may be appropriate. The results of this scientific assessment and prior verification efforts demonstrate the soundness of the numerical techniques and robustness of FDS. The validation results indicate that FDS is suitable for modeling dense gas dispersion with and without obstructions.

03 NATURAL GAS↗

Universal Monte Carlo Event Generator

With the Jefferson Lab 12 GeV physics program underway and plans for the future Electron-Ion Collider (EIC), the nuclear physics community is entering a new era of exploration of QCD phenomena involving extensive data taking and event-level processing. This brings with it the potential for unprecedented access to multidimensional particle momentum distributions (PMDs) that can be connected to various theoretical frameworks by unfolding the emergent quantum mechanical properties of QCD using the PMDs. In practice, the PMDs are rendered as discretized histograms (typically one- or two-dimensional projections), and detector effects must be taken into account to unfold the pure detector effect-free PMDs that can be connected with theory. One of the challenges in this new era is obtaining faithful reconstructions of the multidimensional PMDs that preserve all of the inherent particle correlations. In this LDRD project we developed a novel approach using machine learning (ML) that solves this challenge, by avoiding entirely the need to use histograms as the main numerical technique to obtain the detector effect-free PMDs. The new approach is, moreover, scalable to higher dimensional PMDs. The central idea involves training neural networks (NNs) to generate synthetic event-level data (momenta 4-vectors of final state particles) to preserve all correlations among the particles. This is achieved by converting the trial synthetic vertex-level events to detector-level events using detector simulators. The NNs are then tuned using a specialized distance metric between the synthetic detector events and the real detector events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stochastic Modeling in a Multimaterial Continuum Mixture Shock Physics Code

Stochastic modelling approaches are presented to capture random effects at multiple time and length scales. Random processes that occur at the microscale produce nondeterministic effects at the macroscale. Here we present three stochastic modeling approaches that describe random processes at microscopic length scales and map these processes to the macroscopic length scale. The first stochastic modeling approach is based upon a particle based numerical technique to solve a Stochastic Differential Equation (SDE) using an arbitrary diffusion process to capture random processes at the microstructural level. The second approach prescribes a Probability Density Function (PDF) for the drift and diffusion of the random variable derived using the forward and backward Kolmogorov equations. This method requires mean and drift evolution PDF transport equations. The third approach is the coupling of multiple random variables which are dependent on each other. The relationship of the PDFs and a coupling function, known as a copula, produces a Joint Probability Density Function (JPDF). These stochastic modeling approaches are implemented into a Multiple Component (MC) shock physics computational code and used to model statistical fracture and reactive flow applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Implementation of the Glued Sphere Discrete Element Model for Non-Spherical Particles in MFiX Software

To enhance solver capabilities, simulation flexibility and model validation within the MFiX software, the U.S. Department of Energy (DOE) is funding efforts to develop and integrate the glued-sphere discrete element method into the latest version of MFiX as a dedicated computational module. The glued-sphere discrete element method is a numerical technique to depict the behavior of non-spherical particles in granular flows or particulate systems by representing them as a collection of component spheres. These spheres are bonded together to approximate the shape and mechanical/chemical properties of a more complex particle. The method effectively reuses the existing sphere-sphere collision algorithm, interphase momentum and heat transfer calculations utilized in the traditional discrete element method, extending these capabilities to non-spherical particles. Additionally, this method explicitly resolves intra-particle temperature and species distributions. The MFiX glued-sphere computational module includes tools for generating glued sphere configurations, a dedicated solver, and visualization capabilities in post-processing. More specifically within the computational module, collision detection and calculations were first performed on component spheres and then mapped onto non-spherical particles. The linear spring-dashpot model was utilized to simulate the sphere-sphere interactions.

Ke, Renjie↗