Search NASA⌕ Search

SEARCH · Search NASA

Results for “orthogonal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

The stability of motion of satellites with flexible appendages

The mathematical formulation associated with the problem of stability of motion of a satellite consisting of a main rigid body and three (or less) pairs of flexible rods is presented. The rods are capable of flexure in two orthogonal directions. Whereas the rotational motion of the body is described by generalized coordinates depending on time alone, the elastic displacements of the rods depend both on spatial position and time. Assuming no external torques, there exist motion integrals in the form of momentum integrals. These integrals can be regarded as constraint equations relating the system velocities, and used to reduce the number of variables describing the motion. The stability analysis has been carried out by means of an extension of the Liapunov direct method. Since the elastic vibrations result in energy dissipation, it is shown that the equilibrium position is asymptotically stable if the Hamiltonian is positive definite and unstable if it can take negative values in the neighborhood of the equilibrium. Determining the sign definiteness of the Hamiltonian is complicated by the fact that it contains spatial derivatives of the elastic displacements. Two methods are presented to cope with this problem. The first, the standard modal analysis in conjunction with series truncation, develops criteria in terms of infinite series associated with the natural modes and frequencies of the elastic rods. The second, the method of integral coordinates, yields closed-form stability criteria involving the system parameters, such as the body moments of inertia, the length and mass distribution of the rods, the lowest natural frequencies of the rods, and the satellite spin velocity.

Meirovitch, L.↗

Superconducting rock magnetometer system

A three axis magnetometer system intended for use in the magnetic measurement of lunar rock samples was designed, fabricated and delivered to NASA Manned Spacecraft Center. The system has a four inch diameter room temperature sample access region and is fitted with three orthogonal magnetic field sensors enclosing this region. Two superconducting magnetic shields are incorporated, which are designed to eliminate external magnetic noise from the sense coils. A superconducting solenoid is mounted coaxially with the sample region and this provides axial magnetic fields up to 1,000 gauss. The system was designed for measuring magnetic moments of geophysical samples, especially remanent moments of lunar samples. The sensitivity of the system in all three axes is about 2 x 10 to the -7th power EMU square root HZ peak to peak, measured in the 0 to 1 Hz bandwidth.

Source record↗

A stellar tracking reference system

A stellar attitude reference system concept for satellites was studied which promises to permit continuous precision pointing of payloads with accuracies of 0.001 degree without the use of gyroscopes. It is accomplished with the use of a single, clustered star tracker assembly mounted on a non-orthogonal, two gimbal mechanism, driven so as to unwind satellite orbital and orbit precession rates. A set of eight stars was found which assures the presence of an adequate inertial reference on a continuous basis in an arbitrary orbit. Acquisition and operational considerations were investigated and inherent reference redundancy/reliability was established. Preliminary designs for the gimbal mechanism, its servo drive, and the star tracker cluster with its associated signal processing were developed for a baseline sun-synchronous, noon-midnight orbit. The functions required of the onboard computer were determined and the equations to be solved were found. In addition detailed error analyses were carried out, based on structural, thermal and other operational considerations.

Klestadt, B.↗

Characterization of impulse noise and analysis of its effect upon correlation receivers

A noise model is formulated to describe the impulse noise in many digital systems. A simplified model, which assumes that each noise burst contains a randomly weighted version of the same basic waveform, is used to derive the performance equations for a correlation receiver. The expected number of bit errors per noise burst is expressed as a function of the average signal energy, signal-set correlation coefficient, bit time, noise-weighting-factor variance and probability density function, and a time range function which depends on the crosscorrelation of the signal-set basis functions and the noise waveform. A procedure is established for extending the results for the simplified noise model to the general model. Unlike the performance results for Gaussian noise, it is shown that for impulse noise the error performance is affected by the choice of signal-set basis functions and that Orthogonal signaling is not equivalent to On-Off signaling with the same average energy.

Houts, R. C.↗

A symmetrical laser Doppler velocity meter and its application to turbulence characterization

A symmetrical method of optical heterodyning of the Doppler shifted scattered laser radiation developed for velocity measurements with a minimal instrumental spectral broadening and a high signal-to-noise ratio. The method employs two laser beams incident on the moving scatterer and does not use any reference beam for heterodyning. The Doppler signal frequency is independent of the scattering angle and the signal possesses no receiving aperture broadening. Optical alignment is simple. Typical values of the instrumental spectral broadening were approximately 0.8 percent of the center frequency of the Doppler signal, and the signal-to-noise ratio was approximately 25 dB, obtained from an air flow system using submicron dioctylphthalate scattering aerosol. Experimental and theoretical studies were made on the characteristics of the Doppler signal and the effect of system parameters in turbulent flow measurement. The optimization process involved in the beam optics and in the use of a spatial filter is described. For localized flow measurement in any direction of the three-dimensional orthogonal coordinates, the system, using uncorrected optical components, had a sensing volume which can be described by a sensitive length of 600 microns and a diameter of 100 microns.

Mazumder, M. K.↗

Attitude stability of spinning flexible spacecraft

The stability of spinning flexible satellites in a force-free environment was analyzed. The satellite was modeled as a rigid core having attached to it a flexible appendage idealized as a collection of particles (point masses) interconnected by springs. Both Liapunov and Routh-Hurwitz stability procedures are used. In the former, the Hamiltonian of the system, constrained through the angular momentum integral so as to admit complete damping, is used as a testing function. Equations of motion are written using the hybrid coordinate formulation, which readily accepts a modal coordinate transformation ultimately allowing truncation to a level amenable to literal stability analysis. Closed form stability criteria are generated for the first mode of a restricted appendage model lying in a plane containing the system center of mass and orthogonal to the spin axis. The effects of spin on flexible bodies are discussed by considering a very elementary particle model. Control of passively unstable spacecraft is briefly considered.

Likins, P. W.↗

Performance of convolution coding concatenated with MFSK modulation in a Gaussian channel

The improvement in db due to concatenation over conventional M-ary coding is studied to reduce the probability of a bit error and to increase the available bit rate for the same system parameters of error rate, transmitter power, and range. The results of calculations for orthogonal modulation with noncoherent detection and Q-level correlator quantization are presented. It is shown that the correlator outputs are quantized to one of the Q levels, and the receiver output is a vector consisting of a list of the M correlator quantum levels. The channel has Q(M) possible outputs and M possible inputs. Optimum output is approached by increasing fine quantization

Choudhury, A. K.↗

Development of a collapsible reinforced cylindrical space observation window

Existing material technology was applied to the development of a collapsible transparent window suitable for manned spacecraft structures. The effort reported encompasses the evaluation of flame retardants intended for use in the window matrix polymer, evaluation of reinforcement angle which would allow for a twisting pantographing motion as the cylindrical window is mechanically collapsed upon itself, and evaluation of several reinforcement embedment methods. A fabrication technique was developed to produce a reinforced cylindrical space window of 45.7 cm diameter and 61.0 cm length. The basic technique involved the application of a clear film on a male-section mold; winding axial and girth reinforcements and vacuum casting the outer layer. The high-strength transparent window composite consisted of a polyether urethane matrix reinforced with an orthogonal pattern of black-coated carbon steel wire cable. A thin film of RTV silicone rubber was applied to both surfaces of the urethane. The flexibility, retraction system, and installation system are described.

Khan, A. Q.↗

Spherical balloon response to three-dimensional time-dependent flows

The concept of the Lagrangian displacement of a balloon is introduced. It is shown that the general balloon response problem is extremely complicated because the wind-forcing functions in the balloon equations of motion are functions of the wind velocity vector and its Eulerian first derivatives evaluated at the location of the balloon. The linear perturbation equations for a spherical balloon are derived by perturbing the components of velocity of the balloon about a terminal velocity state which is in equilibrium with a space-time invariant mean horizontal flow. The atmospheric flow is also perturbed such that the resulting equations can be used to analyze the responses of spherical balloons to three-dimensional time-dependent flows. The wind field is represented in terms of a four-fold Fourier integral that involves three orthogonal wave numbers and a frequency, while the balloon components of velocity are represented as Fourier integrals involving a frequency which, in turn, is a function of the wind field wave numbers and frequency and the unperturbed flow components of velocity.

Fichtl, G. H.↗

Shear free, twisting Einstein-Maxwell metrics in the Newman-Penrose formalism

The problem of finding algebraically special solutions to the vacuum Einstein-Maxwell equations was investigated using a spin coefficient formalism. The general case in which the degenerate null vectors are not hypersurface orthogonal is reduced to a problem of solving five coupled differential equations that are no longer dependent on the affine parameter along the degenerate null directions. It is shown that the most general regular, shear-free, nonradiating solution to these equations is the Kerr-Newman metric.

Lind, R. W.↗

Dynamic characteristics of a two-stage variable-mass flexible missile with internal flow

A general formulation of the dynamical problems associated with powered flight of a two stage flexible, variable-mass missile with internal flow, discrete masses, and aerodynamic forces is presented. The formulation comprises six ordinary differential equations for the rigid body motion, 3n ordinary differential equations for the n discrete masses and three partial differential equations with the appropriate boundary conditions for the elastic motion. This set of equations is modified to represent a single stage flexible, variable-mass missile with internal flow and aerodynamic forces. The rigid-body motion consists then of three translations and three rotations, whereas the elastic motion is defined by one longitudinal and two flexural displacements, the latter about two orthogonal transverse axes. The differential equations are nonlinear and, in addition, they possess time-dependent coefficients due to the mass variation.

Meirovitch, L.↗

Delta launch vehicle isogrid structure NASTRAN analysis

Structural analysis applications of NASTRAN to the isogrid structure of the Delta launch vehicle are discussed. Isogrid is a method employed to stiffen the booster cylindrical shell surface by integrally machining ribs and skin from one piece of metal. The ribs are arranged in a repetitive equilateral triangular pattern; this results in a structural surface whose stiffness is orthogonally isotopic. For that structure, both static and general instability buckling analyses are described and the theoretical results are compared to test data. One of the parameters included in the analysis is the effect of pressure loadings on the buckling allowable load. In addition, a description of a supplementary computer program is presented.

Knighton, D. J.↗

Creep of CoO single crystals.

The crystals were creep tested in compression over ranges of temperature, stress, and oxygen pressure. The creep curves were S-shaped, and only the inflection creep rate was analyzed. A formula is presented for the inflection creep rate in the range from 1000 to 1200 C, 850 to 1700 psi, and 0.001 to 1 atm oxygen. Slip was found to occur on two orthogonal slip systems. The presence of subboundaries was observed by optical and transmission electron microscopy. It is suggested that the creep rate is controlled by oxygen diffusion.

Clauer, A. H.↗

Gyroscopic stimulation of the semicircular canals during sensory deprivation.

A static object revolving at a constant velocity is stationary with respect to that environment. When the object is rotated outside the plane of spin, a gyroscopic or cross-coupled acceleration is produced orthogonal to the two planes of rotation. In this situation, a man feels himself moving in a direction other than that which his visual or proprioceptive sensors perceive. The conflict in spatial orientation is the cross-coupled acceleration imposed on the semicircular canals. This perceptual conflict and the thresholds involved were studied by partial isolation of the physiological stimuli through sensory deprivation. Subjects weighted to neutral buoyancy were submerged in 94 F water in the dark. The subjects were then rotated while being revolved about a displaced axis. Thresholds for detection of angular acceleration were higher than those reported in the literature for detection of acceleration of a single plane. This discrepancy may be attributable to the length of time the stimuli are imposed to each of the canals and the cupular response periods.

Newsom, B. D.↗

High-frequency electromagnetic response of the moon.

It is shown that the contribution of higher harmonics to the lunar transfer functions for the tangential components of the surface magnetic field is significant at frequencies greater than 0.01 Hz. The inclusion of the higher harmonics shows that there are two distinct transfer functions corresponding to the components of the tangential surface magnetic field perpendicular and parallel to the direction of the wave vector of the external disturbance forcing the lunar induction. The dependences of these transfer functions on frequency and location are determined. The effects of the higher harmonics can (1) account for a hitherto unexplained feature in the Apollo 12 and Explorer 35 transfer functions, namely the rolloff at high frequencies, and (2) offer a possible explanation for the frequency dependence of the difference between the transfer functions for the two orthogonal components of the surface magnetic field.

Schubert, G.↗

Radio-auroral aspect sensitivity and the two-stream instability.

The possibility is explored that the auroral electrojet current motions may be sufficiently great not only to introduce some distortion in the magnetic field, but also to substantially increase the maximum deviation from orthogonality permitted by Farley's mechanism. These two effects are then combined to give an approximate indication of how the aspect sensitivity should vary with current strength and direction.

Moorcroft, D. R.↗

A cavity type absorption cell for double resonance microwave spectroscopy.

Description of an experimental dual resonant cavity absorption cell for observing microwave spectroscopic double-resonance effects. The device is composed of two Fabry-Perot interferometers excited by independent microwave sources and mounted at right angles in a suitable vacuum enclosure. The pumping transition is modulated by one source and the modulation induced on the rf absorption in the orthogonal cavity is detected.

Lee, M. C.↗