SEARCH · Search NASA

Results for “output feedback control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRS1975

An optical/digital processor - Hardware and applications

A real-time two-dimensional hybrid processor consisting of a coherent optical system, an optical/digital interface, and a PDP-11/15 control minicomputer is described. The input electrical-to-optical transducer is an electron-beam addressed potassium dideuterium phosphate (KD2PO4) light valve. The requirements and hardware for the output optical-to-digital interface, which is constructed from modular computer building blocks, are presented. Initial experimental results demonstrating the operation of this hybrid processor in phased-array radar data processing, synthetic-aperture image correlation, and text correlation are included. The applications chosen emphasize the role of the interface in the analysis of data from an optical processor and possible extensions to the digital feedback control of an optical processor.

Casasent, D.↗

NASA NTRS1977

Digital flight control systems

The design of stable feedback control laws for sampled-data systems with variable rate sampling was investigated. These types of sampled-data systems arise naturally in digital flight control systems which use digital actuators where it is desirable to decrease the number of control computer output commands in order to save wear and tear of the associated equipment. The design of aircraft control systems which are optimally tolerant of sensor and actuator failures was also studied. Detection of the failed sensor or actuator must be resolved and if the estimate of the state is used in the control law, then it is also desirable to have an estimator which will give the optimal state estimate even under the failed conditions.

Caglayan, A. K.↗

NASA NTRS1987

A new approach to adaptive control of manipulators

An approach in which the manipulator inverse is used as a feedforward controller is employed in the adaptive control of manipulators in order to achieve trajectory tracking by the joint angles. The desired trajectory is applied as an input to the feedforward controller, and the controller output is used as the driving torque for the manipulator. An adaptive algorithm obtained from MRAC theory is used to update the controller gains to cope with variations in the manipulator inverse due to changes of the operating point. An adaptive feedback controller and an auxiliary signal enhance closed-loop stability and achieve faster adaptation. Simulation results demonstrate the effectiveness of the proposed control scheme for different reference trajectories, and despite large variations in the payload.

Seraji, H.↗

DOE OSTI2020

Preliminary design overview and performance assessment of the ITER low-field side reflectometer

The design of the ITER low-field side reflectometer (LFSR) has matured to a complete end-to-end preliminary design. LFSR will supply three key plasma measurements: (1) electron density profile, (2) electron density fluctuations, and (3) poloidal rotation. Simultaneous measurements of the three quantities are enabled by an array of six monostatic antennas which inject from an equatorial port on the outboard side of the ITER vessel. Low-loss transmission lines, consisting of corrugated, overmoded waveguide and miter bends, transmit the 30–165 GHz, O- and X-mode signals to and from the ITER plasma. Integrated transmission-line components serve a range of purposes, such as protection from high-power stray radiofrequency radiation, accommodation of transmission-line displacement, and simultaneous measurement of reference and plasma phases during the discharge. Broadband transmission signals are realized by full-band microwave transceivers combined with quasi-optical multiplexing. A field-programmable gate array (FPGA) processor demodulates the profile reflectometer signals, enabling real-time density profile measurements for plasma control system feedback. A full-scale transmission line test facility provides an integrated environment to assess the performance of critical LFSR components. Theoretical modeling together with insertion loss measurements provide the basis for a comprehensive power budget, which accounts for transmitted output power, transmission-line losses, antenna coupling, and plasma effects. Results indicate that high signal-to-noise ratios are achievable with the current design. A synthetic reflectometer model, using real design parameters and baseline ITER profiles, has been developed to estimate the return signal. With evolving microwave and data acquisition technologies, full-band, ultrafast sweeps (<1 μs) will be realizable for ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1972

Design of non-interacting multivariable discrete time systems

The theory of decoupling a multivariable system with the help of state variable feedback is applied to discrete time systems. The system differential equations in the continuous time domain are converted to a discrete time representation. A discrete time controller is designed to control the overall input to the system such that a specified desired decoupled output response is obtained. The decoupled system behaves as a set of single-input, single-output systems and state variable techniques can be easily applied to control each output individually. Control is achieved by periodically sampling the inputs and all the states and feeding them back through a controller. For linear time invariant systems the control is time invariant. The basic theory of decoupling involves feeding back all the states twice, first to decouple the system and then to achieve a desired response. The states of the system are computed with the help of a state estimator which calculates all the present states of the system so that on-line control can be applied to real time systems. The theory is applied to a model of a nuclear rocket engine.

Agrawal, B. L.↗

NASA NTRS1976

Linear phase demodulator including a phase locked loop with auxiliary feedback loop

A phase modulated wave that may have no carrier power is demodulated by a phase locked loop including a phase detector for deriving an A.C. data output signal having a magnitude and a phase indicative of the phase of the modulated wave. A feedback loop responsive to the data output signal restores power to the carrier frequency component to the loop. In one embodiment, the feedback loop includes a phase modulator responsive to the phase modulated wave and the data output signal. In a second embodiment, carrier frequency power is restored by differentiating the data output signal and supplying the differentiated signal to an input of a voltage controlled oscillator included in the phase locked loop.

Rippy, R. R.↗

NASA NTRS1988

ARC length control for plasma welding

A control system to be used with a plasma arc welding apparatus is disclosed. The plasma arc welding apparatus includes a plasma arc power supply, a contactor, and an electrode assembly for moving the electrode relative to a work piece. The electrode assembly is raised or lowered by a drive motor. The present apparatus includes a plasma arc adapter connected across the power supply to measure the voltage across the plasma arc. The plasma arc adapter forms a dc output signal input to a differential amplifier. A second input is defined by an adjustable resistor connected to a dc voltage supply to permit operator control. The differential amplifier forms an output difference signal provided to an adder circuit. The adder circuit then connects with a power amplifier which forms the driving signal for the motor. In addition, the motor connects to a tachometor which forms a feedback signal delivered to the adder to provide damping, therby avoiding servo loop overshoot.

William F Iceland↗

NASA NTRS1989

Digital redesign of the control system for the Robotics Research Corporation model K-1607 robot

The analog control system for positioning each link of the Robotics Research Corporation Model K-1607 robot manipulator was redesigned for computer control. In order to accomplish the redesign, a linearized model of the dynamic behavior of the robot was developed. The parameters of the model were determined by examination of the input-output data collected in closed-loop operation of the analog control system. The robot manipulator possesses seven degrees of freedom in its motion. The analog control system installed by the manufacturer of the robot attempts to control the positioning of each link without feedback from other links. Constraints on the design of a digital control system include: the robot cannot be disassembled for measurement of parameters; the digital control system must not include filtering operations if possible, because of lack of computer capability; and criteria of goodness of control system performing is lacking. The resulting design employs sampled-data position and velocity feedback. The criteria of the design permits the control system gain margin and phase margin, measured at the same frequencies, to be the same as that provided by the analog control system.

Carroll, Robert L.↗

NASA NTRS2015

Robust Stability Analysis of the Space Launch System Control Design: A Singular Value Approach

Classical stability analysis consists of breaking the feedback loops one at a time and determining separately how much gain or phase variations would destabilize the stable nominal feedback system. For typical launch vehicle control design, classical control techniques are generally employed. In addition to stability margins, frequency domain Monte Carlo methods are used to evaluate the robustness of the design. However, such techniques were developed for Single-Input-Single-Output (SISO) systems and do not take into consideration the off-diagonal terms in the transfer function matrix of Multi-Input-Multi-Output (MIMO) systems. Robust stability analysis techniques such as H(sub infinity) and mu are applicable to MIMO systems but have not been adopted as standard practices within the launch vehicle controls community. This paper took advantage of a simple singular-value-based MIMO stability margin evaluation method based on work done by Mukhopadhyay and Newsom and applied it to the SLS high-fidelity dynamics model. The method computes a simultaneous multi-loop gain and phase margin that could be related back to classical margins. The results presented in this paper suggest that for the SLS system, traditional SISO stability margins are similar to the MIMO margins. This additional level of verification provides confidence in the robustness of the control design.

Pei, Jing↗

NASA NTRS1982

Feedback stabilization and control of linear neutral systems

The first problem treated here is the realization and stabilization of linear neutral systems with discrete delays. It is shown that any autonomous linear neutral system with discrete delays is zero-state equivalent to an abstract linear system over a local ring of operators. Using the abstract model, the basic existence question for neutral realization is then settled. For general infinite dimensional linear systems, there is no precise analog of the finite dimensional state space isomorphism theorem. Because of this, the notion of spectral minimality must be introduced. For the case of single input-single output systems, realizations are obtained that are both minimal and spectrally minimal. Using the Cruz-Hale theory of stable D-operators, conditions are given that ensure that any poles introduced into the realization are strictly contained in the left half plane and indeed are characterized as characteristic values of the D-operator. The problem of the feedback stabilization of neutral systems is then considered using the abstract model. It is shown that, for neutral systems with commensurable delays and a stable D-operator in the sense of Cruz and Hale, Morses theorem (1976) on pole assignment over a PID implies stabilizability in the reachable case.

Tarn, T. J.↗

NASA NTRS1984

Three-phase power factor controller with induced EMF sensing

A power factor controller for an ac induction motor is provided which is of the type comprising thyristor switches connected in series with the motor, phase detectors for sensing the motor current and voltage and providing an output proportional to the phase difference between the motor voltage and current, and a control circuit, responsive to the output of the phase detector and to a power factor command signal, for controlling switching of the thyristor. The invention involves sensing the induced emf produced by the motor during the time interval when the thyristor is off and for producing a corresponding feedback signal for controlling switching of the thyristor. The sensed emf is also used to enhance soft starting of the motor.

Nola, F. J.↗

NASA NTRS1990

Feedforward/feedback control synthesis for performance and robustness

Both feedforward and feedback control approaches for uncertain dynamical systems are investigated. The control design objective is to achieve a fast settling time (high performance) and robustness (insensitivity) to plant modeling uncertainty. Preshapong of an ideal, time-optimal control input using a 'tapped-delay' filter is shown to provide a rapid maneuver with robust performance. A robust, non-minimum-phase feedback controller is synthesized with particular emphasis on its proper implementation for a non-zero set-point control problem. The proposed feedforward/feedback control approach is robust for a certain class of uncertain dynamical systems, since the control input command computed for a given desired output does not depend on the plant parameters.

Wie, Bong↗

NASA NTRS2001

[ ] or SUCCESS is Not Enough: Current Technology and Future Directions in Proof Presentation

Automated theorem provers for first order logic are now around for several decades. Over the last few years, their deductive power to solve hard problems has increased tremendously. The annual CASC system competitions [Se97] give a clear picture of this situation. However, today's automated theorem provers are restricted "more by general usability than by raw deductive power." As a result of this, there are only very few serious applications of automated theorem provers. There are numerous features which a theorem prover lacks for real-world applicability. An automated theorem prover (as it is currently seen) is nothing more than a fast and elaborate search procedure. In that sense, an ATP can compared to a formulated race car, cool and fast, but virtually unusable for shopping groceries around the corner. Many important features are missing, or are optimized for speed rather than for applicability. [Schol] identifies important features which are needed for practical usability like detection of non-theorems, handling of modal/inductive proof tasks, control of the prover, and proof output. In this paper, we will focus solely on the last point, the presentation of the ATP's result to the user. In the rest of this paper, we will first discuss the general importance of providing feedback to the user, then we will describe the system ExplainIt!, a part of the deductive synthesis system AMPHION/NAV. In the conclusions we will relate proof presentation to other ways of post-processing a proof found by an ATP and stress their role in the future of automated deduction.

Schumann, Johann↗

NASA NTRS1993

The mechanosensory calcium-selective ion channel: key component of a plasmalemmal control centre?

Mechanosensory calcium-selective ion channels probably serve to detect not only mechanical stress but also electrical, thermal, and diverse chemical stimuli. Because all stimuli result in a common output, most notably a shift in second messenger calcium concentration, the channels are presumed to serve as signal integrators. Further, insofar as second messenger calcium in turn gives rise to mechanical, electrical, and diverse chemical changes, the channels are postulated to initiate regulatory feedbacks. It is proposed that the channels and the feedback loops play a wide range of roles in regulating normal plant function, as well as in mediating disturbance of normal function by environmental stressors and various pathogens. In developing evidence for the physiological performance of the channel, a model for a cluster of regulatory plasmalemmal proteins and cytoskeletal elements grouped around a set of wall-to-membrane and transmembrane linkers has proved useful. An illustration of how the model might operate is presented. It is founded on the demonstration that several xenobiotics interfere both with normal channel behaviour and with gravitropic reception. Accordingly, the first part of the illustration deals with how the channels and the control system within which they putatively operate might initiate gravitropism. Assuming that gravitropism is an asymmetric expression of growth, the activities of the channels and the plasmalemmal control system are extrapolated to account for regulation of both rate and allometry of cell expansion. Finally, it is discussed how light, hormones, redox agents and herbicides could in principle affect growth via the putative plasmalemmal control cluster or centre.

NASA Program Space Biology↗

NASA NTRS1987

Multi-input multi-output system control for experimental aircraft

Results from the synthesis of control laws for an advanced short takeoff aircraft in a low-speed approach flight condition are given. Two of four candidate synthesis techniques are reported: direct eigenspace assignment and explicit model following via a linear quadratic regulator (LQR) formulation. A fundamental objective of this work is to obtain low-order feedback compensators, synthesized via the above techniques, and the judicious use of state estimation, thus allowing the use of a reasonable number of sensors for feedback.

Schmidt, David K.↗

NASA NTRS1984

Phase detector for three-phase power factor controller

A phase detector for the three phase power factor controller (PFC) is described. The phase detector for each phase includes an operational amplifier which senses the current phase angle for that phase by sensing the voltage across the phase thyristor. Common mode rejection is achieved by providing positive feedback between the input and output of the voltage sensing operational amplifier. this feedback preferably comprises a resistor connected between the output and input of the operational amplifier. The novelty of the invention resides in providing positive feedback such that switching of the operational amplifier is synchronized with switching of the voltage across the thyristor. The invention provides a solution to problems associated with high common mode voltage and enables use of lower cost components than would be required by other approaches.

Nola, F. J.↗

NASA NTRS1983

Some applications of direct adaptive control to large structural systems

Direct multivariable model reference adaptive control (DMMRAC) applications are considered with a representative example of a large structural system (LSS). Such applications have in the past been shown to be feasible for multivariable systems, provided that there exists a constant feedback gain matrix such that the resulting input-output transfer function is (simply) positive real.

Bar-Kana, I.↗

NASA NTRS1987

Adaptive control of robotic manipulators

The author presents a novel approach to adaptive control of manipulators to achieve trajectory tracking by the joint angles. The central concept in this approach is the utilization of the manipulator inverse as a feedforward controller. The desired trajectory is applied as an input to the feedforward controller which behaves as the inverse of the manipulator at any operating point; the controller output is used as the driving torque for the manipulator. The controller gains are then updated by an adaptation algorithm derived from MRAC (model reference adaptive control) theory to cope with variations in the manipulator inverse due to changes of the operating point. An adaptive feedback controller and an auxiliary signal are also used to enhance closed-loop stability and to achieve faster adaptation. The proposed control scheme is computationally fast and does not require a priori knowledge of the complex dynamic model or the parameter values of the manipulator or the payload.

Seraji, H.↗