Search NASA⌕ Search

SEARCH · Search NASA

Results for “preforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Binder jet printed WC infiltrated with pre-made melt of WC and Co

WC-Co was made via binder jet additive manufacturing of tungsten carbide followed by melt infiltration with a Co-WC infiltrant. The goal of the study was to achieve fully densified parts in near-net shape with minimal shrinkage while keeping the Co content low. The exact amount of infiltrant was determined in order to fully densify with minimum shrinkage based on the actual volume taken up by WC powder in the preform based on theoretical density, the bounding volume of prints after shrinkage, and the volume from the infiltrant. The eutectic nature of the infiltrant enabled melting at much lower temperature compared to the melting temperature of pure Co. The density, microstructure, grain size, hardness, and fracture toughness were characterized. The shrinkage and net shaping were assessed with light scans. A detailed look at the fracture mechanics was assessed. Here, this approach achieved highly dense WC-Co parts in net-shape with Co vol% of near 29 (Co wt% ~19), density of 96.2% theoretical, hardness of 8.34 GPa, grain size of 7.7 μm, magnetic saturation of 0.5 T, room temperature thermal conductivity of 125 W/mK, and fracture toughness of 24.7 = MPa·m 1/2 .

36 MATERIALS SCIENCE↗

Chrome-free qandilite (Mg 2 TiO 4 ) refractory aggregates: Role of titania source and evaluation of thermal expansion coefficient

As used chrome-based refractories may contain toxic Cr 6+ , the chrome-free Mg 2 TiO 4 phase is being considered which is known to improve hot strength and resistance to thermal shock and slag corrosion. As in situ Mg 2 TiO 4 formation generates porosity, preformed aggregates are desirable. Dilatometric studies revealed that when dead burned magnesia is combined with industrial anatase instead of rutile, it expanded less (1% versus 7.2%) and the reaction occurred earlier (965°C compared to 1120°C). After sintering at 1,600°C, rutile produced an aggregate with 3.8% open porosity, whereas anatase led to 0 % porosity and a bulk density of 3.24g/cm 3 with a thermal expansion coefficient (70–1,600°C) of 13.5×10 -6 K -1 . Moreover, replacing rutile by anatase eliminates the undesirable MgTiO 3 phase. The anatase-based aggregate consisted of a Mg 2 TiO 4 matrix with residual unreacted MgO and an intergranular, refractory CaTiO 3 phase. In conclusion, the rutile-based aggregate was deemed unsuitable due to a low-melting microstructure of forsterite contiguous with CaTiO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of silicon infiltration conditions on microstructure and mechanical properties in binder jet 3D printed SiC

Atmosphere, temperature, and hold time were varied for silicon infiltrated binder jet 3D printed SiC preforms. A two-step infiltration process optimized infiltration. The first step at 1450 °C under vacuum facilitated improved wetting. The second step at elevated temperature in argon advanced infiltration while suppressing vaporization. Variation of the second-step temperature (1550–1750 °C) and hold time revealed that 1550 °C for 1 h in argon following initial vacuum treatment yielded the highest silicon uptake ratio (∼96 %) with minimal residual porosity and strengths of 150–180 MPa. Flexural strength was either stable or improved with elevated temperatures up to 1000°C. In contrast, higher temperatures or extended hold times led to increased silicon vaporization and pores. The optimized process was applied to formulations with extra carbon to enhance SiC content and interconnectedness through reaction bonding, which corresponded to increased flexural strength. These findings provide guidance for silicon infiltration in additively manufactured SiC.

Yoon, Bola [ORNL] (ORCID:0000000260875373)↗

Pro5 is not essential for the formation of ‘Ni-hook’ in nickel superoxide dismutase

The N-terminus of nickel-dependent superoxide dismutase (NiSOD) forms a structural motif known as the "Ni-hook," where the peptide wraps around the metal to bring cysteine-2 and cysteine-6 into spatial proximity, allowing these residues to coordinate in a cis-geometry. A highly conserved proline-5 residue in the Ni-hook adopts a cis-conformation that is widely considered important for its formation. Herein, we investigate this role by point mutation of Pro5 to alanine. The results obtained show that the variant exhibits wild-type-like redox catalysis and features a Ni(III) center very similar to that found in enzyme. Structural analysis using x-ray absorption spectroscopy of the nickel sites in as-isolated P5A-NiSOD reveals changes in the variant and are consistent with a six-coordinate Ni site with (N/O) 4 S 2 coordination. These changes are attributed to changes in the Ni(II) site structure. Nickel-binding studies using isothermal titration calorimetry reveal two binding events with K d = 25(20) nM, and 250(60) nM. These events are attributed to i) Ni(II) binding to a preformed Ni-hook containing cis-Pro5 and ii) the combination of trans- to cis- isomerization upon Ni(II) binding, respectively. Finally, the higher-affinity binding event is absent in P5A-NiSOD, an observation attributed to the low abundance of the cis-Ala5 isomer in the apo-protein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-sided friction stir riveting by extrusion: A process for joining dissimilar materials

Two-sided friction stir riveting (FSR) by extrusion is an innovative process developed to rapidly, efficiently, and securely join dissimilar materials. This process extends a previously developed one sided friction stir extrusion process to create a strong and robust joint by producing a continuous, rivet-like structure through a preformed hole in one of the materials with a simultaneous, two-sided friction stir spot weld. The two-sided FSR by extrusion process securely joins the dissimilar materials together and effectively locks them in place without the use of any separate materials or fasteners. Lastly, in this paper we demonstrate the process by joining aluminum to steel and illustrate its potential application to automotive and aerospace manufacturing processes.

36 MATERIALS SCIENCE↗

Fast-rate joining of thermoplastic composites using integrated additive manufacturing and compression molding process

The integration of additive manufacturing (AM) technology with compression molding (CM), has emerged as a high-performance composite manufacturing technology in recent years. In the AM-CM process, quickly deposited AM preform on a mold undergoes a rapid compaction cycle to fabricate structurally robust composite parts due to highly controlled fiber alignment (from AM) and reduced porosity (from CM). Currently, AMCM-based part size is limited by the size of the mold volume, thus posing a challenge to manufacture scalable parts. Here, this work focuses on joining techniques developed to enable fast rate joining of short fiber-reinforced thermoplastic composite parts using the AM-CM process. Acrylonitrile butadiene styrene resin reinforced with 20 wt% short carbon fiber composites was printed onto a flat mold and pressed under a hydraulic press. Fabricated panels were joined by the (a) mechanical impression at the joining interface and (b) over-molded continuous carbon fiber (CCF) sheet. Tensile tests were performed to characterize the joining strength of both mechanical impression-based joints and CCF over molded joints. Among the mechanical impression-based joints, a U-shape channel allowed the fibers to flow between two joint parts, and 280 % increased mechanical properties were observed. The continuous carbon fiber-based over molded joint CCF showed 350 % increase in tensile strength compared to the butt joints.

36 MATERIALS SCIENCE↗

Structural Basis for Human PHF2 Jumonji Domain Interaction with Metal Ions

PHF2 belongs to a class of {alpha}-ketoglutarate-Fe{sup 2+}-dependent dioxygenases. PHF2 harbors a plant homeodomain (PHD) and a Jumonji domain. PHF2, via its PHD, binds Lys4-trimethylated histone 3 in submicromolar affinity and has been reported to have the demethylase activity of monomethylated lysine 9 of histone 3 in vivo. However, we did not detect demethylase activity for PHF2 Jumonji domain (with and without its linked PHD) in the context of histone peptides. We determined the crystal structures of PHF2 Jumonji domain in the absence and presence of additional exogenous metal ions. When Fe{sup 2+} or Ni{sup 2+} was added at a high concentration (50 mM) and allowed to soak in the preformed crystals, Fe{sup 2+} or Ni{sup 2+} was bound by six ligands in an octahedral coordination. The side chains of H249 and D251 and the two oxygen atoms of N-oxalylglycine (an analog of {alpha}-ketoglutarate) provide four coordinations in the equatorial plane, while the hydroxyl oxygen atom of Y321 and one water molecule provide the two axial coordinations as the fifth and sixth ligands, respectively. The metal binding site in PHF2 closely resembles the Fe{sup 2+} sites in other Jumonji domains examined, with one important difference -- a tyrosine (Y321 of PHF2) replaces histidine as the fifth ligand. However, neither Y321H mutation nor high metal concentration renders PHF2 an active demethylase on histone peptides. Wild type and Y321H mutant bind Ni{sup 2+} with an approximately equal affinity of 50 {mu}M. We propose that there must be other regulatory factors required for the enzymatic activity of PHF2 in vivo or that perhaps PHF2 acts on non-histone substrates. Furthermore, PHF2 shares significant sequence homology throughout the entire region, including the above-mentioned tyrosine at the corresponding iron-binding position, with that of Schizosaccharomyces pombe Epe1, which plays an essential role in heterochromatin function but has no known enzymatic activity.

59 BASIC BIOLOGICAL SCIENCES↗

Alternative route for the preparation of CoSb{sub 3} and Mg{sub 2}Si derivatives

An alternative manufacturing route has been developed for cobalt triantimonide and magnesium disilicide derivatives. Elemental powders were mixed in stoichiometric proportions, cold pressed into cylindrical preforms and heated in oxygen-free environment to initiate the exothermic reaction. According to DTA/TG measurements and observations under high-temperature microscope, the onset of reaction occurred at a temperature not exceeding the melting point of the more volatile component, i.e. antimony in the case of CoSb{sub 3} and magnesium in the case of Mg{sub 2}Si. The reaction products were additionally heat treated to secure homogenization. Dense sinters were obtained by hot uniaxial pressing of the obtained powders in moderate temperature-and-pressure conditions. Several advantages were identified in the proposed technology: absence of liquid phases, relatively short time of the synthesis, possibility of in-situ or ex-situ doping and grain size control. - Graphical abstract: (1) Manufacturing flow sheet for CoSb{sub 3} (milling included) and Mg{sub 2}Si (no milling). (2) Micrographs of CoSb{sub 3} product. (3) Micrographs of Mg{sub 2}Si product. Highlights: Black-Right-Pointing-Pointer The combustion synthesis followed by HP was used for the manufacturing of CoSb{sub 3} or Mg{sub 2}Si. Black-Right-Pointing-Pointer The time of reaction is shorter compared with many other synthesis methods. Black-Right-Pointing-Pointer The process is scalable and practically wasteless.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and electrical properties of A-site cation ordered BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}

In this paper, we report on a synthesis procedure, structural and electrical properties of BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}, A-site double perovskites having layered arrangement of Ba and Er cations. These materials belong to a family of BaLnMn{sub 2}O{sub 5+δ} oxides, which up to now were successfully synthesized for Ln=Y and La–Ho lanthanides. Up to our knowledge, this is the first report on the successful synthesis of BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}, yielding>95 wt% of the considered compounds. Structural characterization of the materials is given at room temperature, together with in situ XRD studies, performed during oxidation of BaErMn{sub 2}O{sub 5} in air, at elevated temperatures up to 500 °C. A complex structural behavior was observed, with oxidation process of BaErMn{sub 2}O{sub 5} occurring at around 300 °C. The oxidized BaErMn{sub 2}O{sub 6} shows a structural phase transition at about 225 °C. Results of structural studies are supported by thermogravimetric measurements of the oxidation process, performed in air, as well as reduction process, preformed in 5 vol% of H{sub 2} in Ar. Additionally, isothermal oxidation/reduction cycles were measured at 500 °C, showing interesting properties of BaErMn{sub 2}O{sub 5+δ}, from a point of view of oxygen storage technology. Electrical conductivity of BaErMn{sub 2}O{sub 5} is of the order of 10{sup −4} S cm{sup −1} at room temperature and shows activated character on temperature with activation energy E{sub a}=0.30(1) eV. Positive sign of Seebeck coefficient for this material indicates holes as dominant charge carriers. Oxidized BaErMn{sub 2}O{sub 6} possesses much higher electrical conductivity, almost 0.2 S cm{sup −1} at room temperature. Additional, about 10-fold increase of electrical conductivity, occurring in the vicinity of 225 °C for this material, can be associated with phase transition from charge/orbital-ordered insulator COI(CE) to paramagnetic metal PM phase. The highest conductivity for BaErMn{sub 2}O{sub 6} was measured near 500 °C and is almost equal to 40 S cm{sup −1}, while negative sign of Seebeck coefficient can be associated with electrons being dominant charge carriers. - Graphical abstract: Structure and oxygen storage properties of BaErMn{sub 2}O{sub 5+δ}. - Highlights: • Synthesis of BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}. • Structural and transport properties of BaErMn{sub 2}O{sub 5+δ}. • Oxygen storage in BaErMn{sub 2}O{sub 5}–BaErMn{sub 2}O{sub 6} system. • Phase transitions in BaErMn{sub 2}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature

Hot compression tests of 7150 aluminum alloy were preformed on Gleeble-1500 system in the temperature range from 300 deg. C to 450 deg. C and at strain rate range from 0.01 s{sup -1} to 10 s{sup -1}, and the associated structural changes were studied by observations of metallographic and transmission electron microscope. The results show that the true stress-true strain curves exhibit a peak stress at a critical strain, after which the flow stresses decrease monotonically until high strains, showing a dynamic flow softening. The peak stress level decreases with increasing deformation temperature and decreasing strain rate, which can be represented by a Zener-Hollomon parameter in the hyperbolic-sine equation with the hot deformation activation energy of 229.75 kJ/mol. In the deformed structures appear the elongated grains with serrations developed in the grain boundaries, decreasing of Z value leads to more adequate proceeding of dynamic recrystallization and coarser recrystallized grains. The subgrains exhibit high-angle sub-boundaries with a certain amount of dislocations and large numbers of dynamic precipitates in subgrain interiors as increasing Z value. The dynamic recovery and recrystallization are the main reasons for the flow softening at low Z value, but the dynamic precipitates and successive dynamic particles coarsening have been assumed to be responsible for the flow softening at high Z value.

36 MATERIALS SCIENCE↗

Microstructure and XRD analysis of brazing joint for duplex stainless steel using a Ni-Si-B filler metal

Brazing of a nitrogen-containing duplex stainless steel was preformed using a nickel-based filler metal (Ni-4.5wt.%, Si-3.2wt.%, B). The microstructure of the brazed joint was investigated using scanning electron microscopy, energy dispersive spectrometry, electron probe microanalyzer, and layer-by-layer X-ray diffraction analysis. The results indicated that before completion of isothermal solidification, BN, Ni{sub 3}B and Ni{sub 3}Si precipitates formed at the interface, in the athermally solidified zone and isothermally solidified zone, respectively. After isothermal solidification, only {gamma}-Ni phase appeared in the brazed interlayer. The appearance of hardness peak values in the athermally solidified zone and the interface most probably corresponded to the formation of Ni{sub 3}B and BN, respectively.

36 MATERIALS SCIENCE↗

Anisotropy in thermal conductivity of graphite flakes–SiC{sub p}/matrix composites: Implications in heat sinking design for thermal management applications

Within the frame of heat dissipation for electronics, a very interesting family of anisotropic composite materials, fabricated by liquid infiltration of a matrix into preforms of oriented graphite flakes and SiC particles, has been recently proposed. Aiming to investigate the implications of the inherent anisotropy of these composites on their thermal conductivity, and hence on their potential applications, materials with matrices of Al–12 wt.% Si alloy and epoxy polymer have been fabricated. Samples have been cut at a variable angle with respect to the flakes plane and thermal conductivity has been measured by means of two standard techniques, namely, steady state technique and laser flash method. Experimental results are presented and discussed in terms of current models, from which important technological implications for heat sinking design can be derived. - Highlights: • Anisotropy in thermal conductivity of graphite flakes-based composites is evaluated. • Samples are cut in a direction forming a variable angle with the oriented flakes. • For angles 0° and 90°, thermal conductivity does not depend on sample geometry. • For intermediate angles, thermal conductivity strongly depends on sample geometry. • “Thin” samples must be thicker than 600 μm, “thick” samples must be encapsulated.

36 MATERIALS SCIENCE↗

Characterization of the porous structures of the green body and sintered biomedical titanium scaffolds with micro-computed tomography

The present research was aimed at gaining an understanding of the porous structure changes from the green body through water leaching and sintering to titanium scaffolds. Micro-computed tomography (micro-CT) was performed to generate 3D models of titanium scaffold preforms containing carbamide space-holding particles and sintered scaffolds containing macro- and micro-pores. The porosity values and structural parameters were determined by means of image analysis. The result showed that the porosity values, macro-pore sizes, connectivity densities and specific surface areas of the titanium scaffolds sintered at 1200 °C for 3 h did not significantly deviate from those of the green structures with various volume fractions of the space holder. Titanium scaffolds with a maximum specific surface area could be produced with an addition of 60–65 vol% carbamide particles to the matrix powder. The connectivity of pores inside the scaffold increased with rising volume fraction of the space holder. The shrinkage of the scaffolds prepared with > 50 vol% carbamide space holder, occurring during sintering, was caused by the reductions of macro-pore sizes and micro-pore sizes as well as the thickness of struts. In conclusion, the final porous structural characteristics of titanium scaffolds could be estimated from those of the green body. - Highlights: •Porous structures of green body and sintered titanium scaffolds was studied. •Porous structures of both samples were quantitatively characterized with micro-CT. •Porous structures of scaffolds could be controlled from the green body. •Shrinkage mechanisms of titanium scaffolds during sintering was established.

36 MATERIALS SCIENCE↗

Microstructural development of a C/C-ZrC-Cu composite prepared by reactive melt infiltration with Zr/Cu powder mixture

Highlights: • The composite was prepared by reactive melt infiltration with Zr/Cu powder mixture. • Some ZrC particles coalesced into a continuous layer around the pyrolytic carbon. • Nano-sized inclusions of Cu–ZrC were formed inside some ZrC particles. • Cu–rich phase gathered at the interface between the ZrC layer and pyrolytic carbon. - Abstract: Zirconium carbide (ZrC) was introduced into porous carbon/carbon(C/C) preforms by reactive melt infiltration (RMI) using Zr/Cu powder mixture as the infiltrator. Characterization results revealed that ZrC particles were present in the infiltration matrix in two forms, some of which coalesced into a continuous layer around the pyrolytic carbon (PyC) while the others were dispersed within Cu phase which was distributed throughout the matrix. Nano-sized inclusions of Cu-ZrC were detected inside some ZrC particles. Furthermore, Cu-rich phase was observed at the interface between the continuous ZrC layer and PyC. The formation of Cu-ZrC mixture and Cu-rich phase was attributed to the trapping mechanism that some Zr-Cu-based liquid remained during the coalescence of ZrC particles or the formation of the continuous ZrC layer.

36 MATERIALS SCIENCE↗

Process-structure-property considerations for wire-based directed energy deposition of Ti-6Al-4V

Directed energy deposition (DED) is an attractive additive manufacturing (AM) process for large structural components. The rapid solidification and layer-by-layer process associated with DED results in non-ideal microstructures, such as large grains with strong crystallographic textures. These non-ideal microstructures can lead to severe anisotropy in the mechanical properties. Despite these challenges, DED has been identified as a potential solution for the manufacturing of near net shape Ti-6Al-4V preforms, replacing lost casting and forging capabilities. Two popular wire-based directed energy deposition (W-DED) processes were considered for the manufacturing of Ti-6Al-4V with assessments on their respective metallurgical and mechanical properties, as compared to a conventionally processed material. The two W-DED processes explored were wire arc additive manufacturing (WAAM) and electron beam additive manufacturing (EBAM). High throughput inspection and tensile testing procedures were utilized to generate statistically relevant data sets related to each process and sample orientation. The 2 AM technologies produced material with remarkably different microstructures and mechanical properties. Importantly, results revealed key differences in strength and ductility for the two disparate processes which were found to be related to differences in the metallurgical properties.

36 MATERIALS SCIENCE↗

Synthesis of Pt-immobilized on silica and polystyrene-encapsulated silica and their applications as electrocatalysts in the proton exchange membrane fuel cell

Nano sized Pt particles were successfully immobilized onto SiO{sub 2} and polystyrene-encapsulated silica core shell (SiO{sub 2}@PS). To make the immobilization of Pt onto both silica and polystyrene-encapsulated silica core shell, SiO{sub 2} was first functionalized with -NH{sub 2} using 3-amino propyl trimethoxysilane (APTMS) while for core shell, the negatively charged surface of polystyrene (PS) was changed with positive charge by cationic surfactant such as cetyltrimethylammonium chloride (CTACl) to make the formation of SiO{sub 2} shell on preformed PS sphere. Transmission electron micrograph (TEM) images shows that Pt nanoparticles immobilized onto SiO{sub 2} and SiO{sub 2}@PS were to be 3-4 nm without agglomeraiton. The energy dispersive spectroscope (EDS) shows that Pt contents on both SiO{sub 2} and SiO{sub 2}@PS were to be 21.45% and 20.28%, respectively. In case of Pt-SiO{sub 2}@PS, it is believed that Pt should have been immobilized onto PS surface and pore within SiO{sub 2} shell as well as SiO{sub 2} surface. The MEA fabricated with Pt-SiO{sub 2}@PS shows better cell performance than of Pt-SiO{sub 2}.

36 MATERIALS SCIENCE↗

Conformal construction of polyaniline shell on cobalt oxide nanoflake core for enhanced Li ion storage

Highlights: • Construct non-axial polyaniline shell on Co{sub 3}O{sub 4} nanoflake core. • Non-axial core/shell arrays show enhanced Li storage properties. • Ultrathin PANI shell is favorable for fast ion and electron transfer. - Abstract: It is of great importance to controllably synthesize non-axial metal oxide/conducting polymers arrays for construction of high-performance electrochemical devices. In this work, we develop a facile electro-polymerization method to conformally coat interwoven polyaniline (PANI) shell on the preformed porous Co{sub 3}O{sub 4} nanoflakes forming non-axial Co{sub 3}O{sub 4}/PANI core/shell arrays. Uniform conductive PANI network and high porosity are realized in the non-axial core/shell arrays. As active materials for Li ion storage, the Co{sub 3}O{sub 4}/PANI core/shell arrays show superior high-rate performance including lower polarization, higher reactivity and better cycling life, as compared to the unmodified Co{sub 3}O{sub 4} nanoflake arrays. The capacity deterioration of the Co{sub 3}O{sub 4}/PANI arrays is restricted to a very lower level with a capacity of 871 mAh g{sup −1} at 0.25 A g{sup −1} after 100 cycles, better than the Co{sub 3}O{sub 4} counterpart (669 mAh g{sup −1} at 0.25 A g{sup −1}). This non-axial combination opens up a new door for developing advanced composite arrays for energy storage.

36 MATERIALS SCIENCE↗

Facile synthesis of nitrogen-doped porous carbon as robust electrode for supercapacitors

Highlights: • An efficient and facile method is developed to prepare porous N doped carbon. • A high areal capacitance of 682.8 mF cm{sup −2} is achieved by this electrode. • This electrode also exhibit outstanding cycling preformance. - Abstract: Porous carbon nanomaterials are highly attactive as electrode materials for supercapacitors (SCs), but the relatively low capacitance as a result of their intrinsic electric double-layer mechanism severely hinders their practical applications. In addition, the complicated preparation processes of most porous carbon nanomaterials previously reported is less impressive for large-scale application. In this work, we report an efficient and simple method to synthesize porous N doped carbon (PNC) on flexible carbon cloth as high-performance electrode for SCs. Benefiting from the unique porous architecture and high N dopant content, the as-fabricated PNC electrode delivers excellent capacitive performance. A high areal capacitance of 682.8 mF cm{sup −2} at 2 mA cm{sup −2} and outstanding cycling performance (less than 4% capacitance fading after 10,000 cycles) is achieved by this PNC electrode. This work opens up new opportunities in developing advanced carbon-based electrode for energy storage.

36 MATERIALS SCIENCE↗