Search NASA⌕ Search

SEARCH · Search NASA

Results for “protons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Strategy and performance of the CMS long-lived particle trigger program in proton-proton collisions at $\sqrt{s}$ = 13.6 TeV

In the physics program of the CMS experiment during the CERN LHC Run 3, which started in 2022, the long-lived particle triggers have been improved and extended to expand the scope of the corresponding searches. These dedicated triggers and their performance are described in this paper, using several theoretical benchmark models that extend the standard model of particle physics. The results are based on proton-proton collision data collected with the CMS detector during 2022$-$2024 at a center-of-mass energy of 13.6 TeV, corresponding to integrated luminosities of up to 123 fb$^{-1}$.

FOS: Physical sciences↗

A measurement of the Higgs boson mass in the diphoton decay channel in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A measurement of the Higgs boson mass in the diphoton decay channel is performed using proton-proton collision data at a center-of-mass energy of 13 TeV. The data set recorded with the CMS detector between 2016 and 2018 is used, corresponding to an integrated luminosity of 138 fb$^{-1}$. A refined detector calibration and new analysis techniques are employed to improve the precision of the results compared to earlier measurements. The Higgs boson mass is measured to be $m_\mathrm{H}$ = 125.13 $\pm$ 0.15 GeV = 125.13 $\pm$ 0.10 (stat) $\pm$ 0.12 (syst) GeV. In addition, a combination with the mass measurement at center-of-mass energies of 7 and 8 TeV in the diphoton final state is performed resulting in $m_\mathrm{H}$ = 125.06 $\pm$ 0.14 GeV = 125.06 $\pm$ 0.09 (stat) $\pm$ 0.11 (syst) GeV.

FOS: Physical sciences↗

Beam-beam effects in the Super Proton-Proton Collider

The Supper Proton-Proton Collider is a next-generation hadron collider that is now being designed. A baseline design aims for a peak luminosity of about 1*10^35 cm^-2 s^-1. The focus of this article is the effect of beam-beam interactions which are expected to strongly influence stability in the beams. We start with a discussion of a scheme to generate the crossing angles at the interaction points while also correcting the dispersion thus created. The optics constraints on the achievable \b{eta}* were studied. Weak-strong simulations were performed to study single particle dynamics via tune footprints, frequency map analysis and dynamic aperture calculations. The long-range interactions with the smallest separations are shown to determine the dynamic aperture. Empirical scaling laws for the dependence of the dynamic aperture on the transverse separations and on the number of long-range interactions are found. A tune scan shows several alternative working points with slightly better dynamic aperture than the baseline choice. Finally an option to significantly increase the dynamic aperture by increasing the crossing angle for different choices of \b{eta}* was studied.

43 PARTICLE ACCELERATORS↗

Measurement of the Higgs boson production via vector boson fusion and its decay into bottom quarks in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A measurement of the Higgs boson (H) production via vector boson fusion (VBF) and its decay into a bottom quark-antiquark pair ($\mathrm{b\bar{b}}$) is presented using proton-proton collision data recorded by the CMS experiment at $\sqrt{s}$ = 13 TeV and corresponding to an integrated luminosity of 90.8 fb$^{-1}$. Treating the gluon-gluon fusion process as a background and constraining its rate to the value expected in the standard model (SM) within uncertainties, the signal strength of the VBF process, defined as the ratio of the observed signal rate to that predicted by the SM, is measured to be $\mu^\text{qqH}_\mathrm{Hb\bar{b}}$ = 1.01$^{+0.55}_{-0.46}$. The VBF signal is observed with a significance of 2.4 standard deviations relative to the background prediction, while the expected significance is 2.7 standard deviations. Considering inclusive Higgs boson production and decay into bottom quarks, the signal strength is measured to be $\mu^\text{incl.}_\mathrm{Hb\bar{b}}$ = 0.99$^{+0.48}_{-0.41}$, corresponding to an observed (expected) significance of 2.6 (2.9) standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Protonic ceramic materials for clean and sustainable energy: advantages and challenges

In recent years, the hydrogen economy has been strongly favoured by governmental and industrial bodies worldwide. A tremendous number of papers are published every year on different aspects of protonic ceramic electrochemical cells (PCECs) due to their lower operation temperature, easier reversible operation, and brighter prospects for further development. While new progress is being made continuously, many critical challenges remain. The effort on PCEC investigation could be more aligned for greater collective impact, e.g. the academic community could devote more effort to overdue critical problems but less to incremental improvements. This review aims to provide some insightful perspectives on critical challenges facing the development of PCECs, to sort out priorities in future effort, and to suggest promising directions to pursue. In this way, it is hoped that the technical readiness level of PCECs might advance more quickly, toward field demonstrations and commercialization for a clean and sustainable energy era.

36 MATERIALS SCIENCE↗

Halide Substitution Effects on Lithium-Ion Diffusion in Protonated Antiperovskites

Solid-state electrolytes (SSEs) for all-solid-state lithium-ion batteries are generating intense interest because these batteries can improve the safety and performance compared with devices fabricated with conventional, flammable liquid electrolytes. In these SSEs, it has been suggested that Li + ion diffusion in the grain boundaries is hindered and is a critical determinant of the overall ionic conductivity (σ). However, Li + ion diffusivities in the grain (D G ) and the grain boundary (D GB ) are difficult to determine experimentally, with few techniques capable of distinguishing the individual contributions. Here, we distinguished the D G and D GB for the protonated lithium antiperovskites (pLiAPs) SSEs: Li 2 OHCl, Li 2 OHBr, Li 2 OHF 0.1 Cl 0.9 , Li 2 OHF 0.1 Br 0.9 , and Li 2 OHCl 0.3 7Br 0.63 . The measurements were obtained directly from 7 Li pulsed-field gradient nuclear magnetic resonance (PFG-NMR) at 353 K. The 7 Li PFG-NMR echo profiles were composed of two primary components with additional secondary oscillatory components – the so-called NMR diffraction phenomenon. The length scale separating the two main components corresponds to a diffusion length of ~1.7 µm, which is thought to be the average grain size (by diameter). The short-range (≤ 1.7 µm) diffusion component associated with D G (≈10 -11 m 2 /s) varied minimally with halide substitution, while the long-range (≥ 1.7 µm) component D GB (≈10 -12 to 10 -15 m 2 /s) was highly sensitive to the substitution of halides and closely correlated with s. In addition, from the comparison of the ratio D GB /D G to D t (the Li + ion diffusion coefficient estimated from the rotational correlation time, t c ), it was determined that the contribution of D G to σ is negligible; 0.01 ~ 0.04 in the pLiAPs studied here. Finally, these insights provide fundamental understanding of the halide substitution effects on Li + ion grain versus grain boundary diffusion, and suggest that careful engineering of the grain boundaries at the microscopic level is necessary to achieve high-performance pLiAP SSEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser-to-proton conversion efficiency studies for proton fast ignition

We assess the conversion efficiency from intense picosecond laser pulses to multi-MeV ion beams for a wide range of laser and target parameters, using 2D kinetic particle-in-cell simulations. Scalings are addressed in a quasi-one-dimensional geometry, leaving out beam divergence. Then, we study the conversion efficiency into a narrow spatial band along the laser axis for flat and hemispherical targets in large-scale 2D simulations. Combining these findings allows us to calculate the energy requirements for ignition of a compressed ICF target with an intense proton beam in a fast-ignition scenario.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final SeaQuest Results on the Flavor Asymmetry of the Proton Light-Quark Sea with Proton-Induced Drell-Yan Process

The Fermilab E906/SeaQuest collaboration performed measurements of the Drell-Yan process using 120 GeV proton beams bombarding liquid hydrogen and liquid deuterium targets. A combined analysis of all collected data was performed to obtain the final results for the 𝜎 𝑝⁢𝑑 /2⁢𝜎 𝑝⁢𝑝 Drell-Yan cross section ratio covering the kinematic region of 0.13 < 𝑥 <0.45. The 𝑥 dependencies of $\bar{d}$(𝑥)/$\bar{𝑢}$⁡(𝑥) and $\bar{d}$(𝑥) $-$ $\bar{𝑢}$⁡(𝑥) are extracted from these cross section ratios. It is found that $\bar{d}$(𝑥) is greater than $\bar{𝑢}$⁡(𝑥) over the entire measured 𝑥 range, with improved statistical accuracy compared to previous measurements. The new results on $\bar{d}$(𝑥)/$\bar{𝑢}$⁡(𝑥) and $\bar{d}$(𝑥) $-$ $\bar{𝑢}$⁡(𝑥) are compared to various parton distribution functions and theoretical calculations.

Leung, C. H. [University of Illinois at Urbana-Cha↗

Hard color-singlet exchange in dijet events in proton-proton collisions at $\sqrt{s} = 13$ TeV

We present a measurement of events with two jets separated by a pseudorapidity gap (jet-gap-jet). The signature is expected from hard color-singlet exchange. The jets are reconstructed with the CMS detector. The highest p_\text{T} p T jets have p_\text{T}^\text{jet1,2} > 40 p T jet1,2 > 40 GeV, with 1.4 < |\eta^\text{jet1,2}| < 4.7 1.4 < | η jet1,2 | < 4.7 and \eta^\text{jet1} \eta^\text{jet2} < 0 η jet1 η jet2 < 0 . We measure the fraction of color-singlet exchange dijet events, f_\text{CSE} f CSE , and compare it to previous measurements and to predictions. We also study jet-gap-jet events where the colliding protons remain intact and are detected with the Roman pots of TOTEM. A larger fraction f_\text{CSE} f CSE is found in the latter subsample.

Baldenegro Barrera, Cristian↗