Search NASA⌕ Search

SEARCH · Search NASA

Results for “remote sensors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

A Microwave Pressure Sounder

An instrument to measure atmospheric pressure at the earth's surface from an orbiting satellite would be a valuable addition to the expanding inventory of remote sensors. The subject of this report is such an instrument - the Microwave Pressure Sounder (MPS). It is shown that global-ocean coverage is attainable with sufficient accuracy, resolution and observational frequency for meteorological, oceanographic and climate research applications. Surface pressure can be deduced from a measurement of the absorption by an atmospheric column at a frequency in the wing of the oxygen band centered on 60 GHz. An active multifrequency instrument is needed to make this measurement with sufficient accuracy. The selection of optimum operating frequencies is based upon accepted models of surface reflection, oxygen, water vapor and cloud absorption. Numerical simulation using a range of real atmospheres defined by radiosonde observations were used to validate the frequency selection procedure. Analyses are presented of alternative system configurations that define the balance between accuracy and achievable resolution.

Flower, D. A.↗

Surveying the earth's environment from space - Spectral, areal, temporal coverage trends

Attention is given to various areas of satellite applications to monitoring the earth's environment. These trends primarily concern spectral, areal, and temporal coverage. Various environmental monitors are discussed in terms of derived economic benefits. Several types of remote sensors for earth applications are described, noting spectral channels, resolution cell size, swath width, and data rate. A sample environmental monitoring system is presented which includes five geostationary satellites, and three or four low earth orbit spacecraft

Nagler, R. G.↗

Ionospheric Doppler sounder as remote sensing for detection and prediction of severe storms

Atmospheric acoustic-gravity waves associated with severe storms are detected by a ground-based ionospheric sounding array, and the location of the severe storms responsible for the wave generation is determined by group ray path computation. Computations based on six events during the extreme tornado outbreak of April 3, 1974, and five single tornado events show that the wave sources are located near the location where tornadoes touchdown more than one hour later. In the hurricane case, the results indicate that waves were generated along the storm track more than 3 hours ahead of the actual location of the storm. The possibility of the development of the present system as a remote sensor for the detection and prediction of severe storms is discussed.

Hung, R. J.↗

Remote sensing data handbook

A digest of information on remote sensor data systems is given. It includes characteristics of spaceborne sensors and the supportive systems immediately associated therewith. It also includes end-to-end systems information that will assist the user in appraising total data system impact produced by a sensor. The objective is to provide a tool for anticipating the complexity of systems and potential data system problems as new user needs are generated. Materials in this handbook span sensor systems from the present to those planned for use in the 1990's. Sensor systems on all planned missions are presented in digest form, condensed from data as available at the time of compilation. Projections are made of anticipated systems.

Source record↗

Multispectral data acquisition and classification - Statistical models for system design

In this paper we relate the statistical processes that are involved in multispectral data acquisition and classification to a simple radiometric model of the earth surface and atmosphere. If generalized, these formulations could provide an analytical link between the steadily improving models of our environment and the performance characteristics of rapidly advancing device technology. This link is needed to bring system analysis tools to the task of optimizing remote sensing and (real-time) signal processing systems as a function of target and atmospheric properties, remote sensor spectral bands and system topology (e.g., image-plane processing), radiometric sensitivity and calibration accuracy, compensation for imaging conditions (e.g., atmospheric effects), and classification rates and errors.

Huck, F. O.↗

Remote sensing of the atmosphere from environmental satellites

The paper outlines the basis of remote sensing in satellite meteorology, the evolution of remote sensors, examples of practical applications, and a prospectus of future developments. The meteorological satellites use instrumentation sensitive to different regions of the electromagnetic spectrum to observe and measure atmospheric and surface properties. In the ultraviolet, solar variability is measured and total atmospheric ozone determined. In the visible, imagery of cloud systems provides better location of storms in data-sparse areas, observes ice and snow boundaries, and monitors floods. Capabilities of microwave imagery are discussed along with successful uses of geosynchronous satellites. Future environmental satellite programs are discussed in some detail, including GARP, TIROS-N and CLIMSAT.

Allison, L. J.↗

Remote sensing using solid-state array technology

The paper describes the design features and capabilities of a remote sensor that uses solid-state linear arrays and operates in a 'pushbroom' scan mode to provide the required performance. Pushbroom scanning is a term describing the technique of using the forward motion of a satellite platform to sweep a linear array of detectors oriented perpendicular to the ground track across a scene being imaged. One array is typically used for each spectral channel. Satellite motion provides one direction of scan and electronic sampling of the detectors in the crosstrack dimension provides the orthogonal scan component to form an image. The detector array is sampled at the appropriate rate so that contiguous lines are produced. The performance of a pushbroom system is discussed relative to radiometric sensitivity, detector array geometric fidelity, and radiometric correction. System advantages are precision geometric positioning of the detectors, very high sensitivity and favorable SNR, low power consumption, and no moving optics.

Thompson, L. L.↗

Measurement of chlorophyll a fluorescence with an airborne fluorosensor

Phytoplankton biomass and diversity among various algal species are important for marine productivity assessments. The spatial heterogeneity of phytoplankton in coastal and estuarine environments complicates estimates of total biomass using conventional surface sampling techniques. Since synoptic or near-synoptic data can be quite useful in these studies, this area is a natural focal point for development of remote sensors. However, it is very difficult to sense phytoplankton density and diversity with spacecraft-borne passive sensors primarily because modulation in the signal due to phytoplankton is of the same order as that of atmospheric effects. The same sensors mounted on aircraft may be able to detect and quantify high concentrations of phytoplankton (blooms), but the current lack of knowledge about the spectral reflectance signatures of the major phytoplankton color groups rules out any diversity measurements by this type of sensor. An active fluorosensor mounted on a low-flying aircraft or helicopter is not limited by any of these constraints. A brief survey of the four currently active systems is presented.

Jarrett, O., Jr.↗

Modulation of centimetric waves by long gravity waves - Progress report on field and laboratory results

Results are presented from laboratory and field experiments on the modulation of short waves by long waves. The field study employed a wave follower capable of tracking ocean waves with frequencies less than 1.0 Hz and heights less than 2.0 m. A high-response laser-optical system was used to detect upwind-downwind and cross-wind slopes of short waves. The laboratory study was conducted with wind over periodic long waves. The laboratory findings are discussed and compared with laboratory radar measurements and also short wave measurements obtained in the field. It is found that long waves significantly modulate the short wave dispersion by their orbital velocity, and that demodulation is necessary if the data collected by remote sensors are to be compared to surface penetrating devices. The modulation level is weak for wavelengths in the range 2.76-3.30 cm. Other relevant results are also presented.

Shemdin, O. H.↗

Visual observations over oceans

Important factors in locating, identifying, describing, and photographing ocean features from space are presented. On the basis of crew comments and other findings, the following recommendations can be made for Earth observations on Space Shuttle missions: (1) flyover exercises must include observations and photography of both temperate and tropical/subtropical waters; (2) sunglint must be included during some observations of ocean features; (3) imaging remote sensors should be used together with conventional photographic systems to document visual observations; (4) greater consideration must be given to scheduling earth observation targets likely to be obscured by clouds; and (5) an annotated photographic compilation of ocean features can be used as a training aid before the mission and as a reference book during space flight.

Terry, R. D.↗

Radiative transfer modeling applied to sea water constituent determination

Optical radiation from the sea is influenced by pigments dissolved in the water and contained in discrete organisms suspended in the sea, and by pigmented and unpigmented inorganic and organic particles. The problem of extracting the information concerning these pigments and particulates from the optical properties of the sea is addressed and the properties which determine characteristics of the radiation that a remote sensor will detect and measure are considered. The results of the application of the volume scattering function model to the data collected in the Gulf of Mexico and its environs indicate that the size distribution of the concentrations of particles found in the sea can be predicted from measurements of the volume scattering function. Furthermore, with the volume scattering function model and knowledge of the absorption spectra of dissolved pigments, the radiative transfer model can compute a distribution of particle sizes and indices of refraction and concentration of dissolved pigments that give an upwelling light spectrum that closely matches measurements of that spectrum at sea.

Faller, K. H.↗

Program of research in severe storms

Two modeling areas, the development of a mesoscale chemistry-meteorology interaction model, and the development of a combined urban chemical kinetics-transport model are examined. The problems associated with developing a three dimensional combined meteorological-chemical kinetics computer program package are defined. A similar three dimensional hydrostatic real time model which solves the fundamental Navier-Stokes equations for nonviscous flow is described. An urban air quality simulation model, developed to predict the temporal and spatial distribution of reactive and nonreactive gases in and around an urban area and to support a remote sensor evaluation program is reported.

Source record↗

Turbid water measurements of remote sensing penetration depth at visible and near-infrared wavelength

Remote sensing of water quality is dicussed. Remote sensing penetration depth is a function both of water type and wavelength. Results of three tests to help demonstrate the magnitude of this dependence are presented. The water depth to which the remote-sensor data was valid was always less than that of the Secchi disk depth, although not always the same fraction of that depth. The penetration depths were wavelength dependent and showed the greatest variation for the water type with largest Secchi depth. The presence of a reflective plate, simulating a reflective subsurface, increased the apparent depth of light penetration from that calculated for water of infinite depth.

Morris, W. D.↗

Influence of gravity wave activity on lower thermospheric photochemistry and composition

The wind and temperature oscillations of internal gravity waves can cause horizontal variations of a factor of two in minor gas number densities in the lower thermosphere over length scales of several hundred kilometers. The variations are due both to vertical transport of constituents whose lifetimes are long compared to the wave period and to chemical activity driven by temperature dependent reaction rate coefficients. The nightglow emission of the hydroxyl radical provides a remote sensor of wave activity between 80 and 90 km. Theoretical calculations show that the horizontal variations in the atomic hydrogen distribution are the largest single contributor to wave structure in the nightglow followed by the effects of temperature fluctuations on the rate coefficient of the reaction H + O3 yields O2 + OH (nu prime is greater than 0).

Frederick, J. E.↗

A regression technique for evaluation and quantification for water quality parameters from remote sensing data

The paper attempts to define optical physics and/or environmental conditions under which the linear multiple-regression should be applicable. It is reported that investigation of the signal response shows that the exact solution for a number of optical physics conditions is of the same form as a linearized multiple-regression equation, even if nonlinear contributions from surface reflections, atmospheric constituents, or other water pollutants are included. Limitations on achieving this type of solution are defined. Laboratory data are used to demonstrate that the technique is applicable to water mixtures which contain constituents with both linear and nonlinear radiance gradients. Finally, it is concluded that instrument noise, ground-truth placement, and time lapse between remote sensor overpass and water sample operations are serious barriers to successful use of the technique.

Whitlock, C. H.↗

Seasonal variations in high-latitude ozone and metastable molecular oxygen emissions - A theoretical interpretation

Comparison of photochemical calculations of atmospheric ozone between 40 and 55 km with measurements from a satellite-borne remote sensor shows agreement in the high-latitude summer hemisphere. However, in the sunlit high-latitude winter, the available data imply either a smaller water vapor mixing ratio than generally accepted or a temperature 15 - 20 K colder than contained in published model atmospheres. As with the ozone data the infrared emission in winter implies an odd oxygen loss rate smaller than predicted on the basis of standard water vapor and temperature models. The magnitude of the 1.27 micron signals and their consistency with upper stratospheric ozone data cast doubt on the large mesospheric ozone abundances deduced in independent experiments.

Frederick, J. E.↗

Adaptive and learning control of large space structures

The paper describes the adaptive learning system for space operations which assumes that structural testing can be conducted during deployment and assembly. Simulation results using the solar electric propulsion array and a novel remote sensor are presented; they involve faster scan television coverage of the motions of the array from four cameras on the corners of the Space Shuttle payload bay. The description of the simulation, the filtering algorithm for processing the TV data, the parameter extraction algorithm, and the simulation results are presented.

Montgomery, R. C.↗