Search NASA⌕ Search

SEARCH · Search NASA

Results for “rotating flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

A mechanism to produce a dawn-dusk component of plasma flow during magnetic reconnection in the magnetotail

Magnetic reconnection between antiparallel field lines in the magnetotail is generally thought to produce plasma acceleration in the earthward-tailward direction. However, measurements of the plasma velocity in the magnetotail during substorm activity sometimes reveal a dawn-dusk component of plasma flow. In this paper, we show that a dawn-dusk component of plasma acceleration may be produced during reconnection if the neutral line is not perpendicular to the magnetic field. In this case, Magnetohydrodynamic (MHD) simulations show that reconnection between antiparallel field lines will initially produce plasma acceleration that is nearly parallel to the neutral line because the magnetic tension force is not opposed by a pressure gradient force in this direction. As the magnetic field topology evolves to a steady state, the plasma flow direction rotates until it is nearly parallel to the plane that initially contained the antiparallel magnetic field lines before reconnection (hereafter referred to as the initial field plane). However, the time required to reach a steady state (typically several hundred seconds in the magnetotail region) may be greater than the time during which the reconnection process is active. Consequently, bursts of plasma flow with a dawn-dusk component may occur in the magnetotail. The initial acceleration along the neutral line depends on the angle theta (sub B) between the neutral line and the initial field plane, with the largest burst of plasma flow along the neutral line occuring when theta (s ub B) = 45 degs.

Hawkins, J. G.↗
NASA NTRS2014

Counter-Rotatable Fan Gas Turbine Engine with Axial Flow Positive Displacement Worm Gas Generator

A counter-rotatable fan turbine engine includes a counter-rotatable fan section, a worm gas generator, and a low pressure turbine to power the counter-rotatable fan section. The low pressure turbine maybe counter-rotatable or have a single direction of rotation in which case it powers the counter-rotatable fan section through a gearbox. The gas generator has inner and outer bodies having offset inner and outer axes extending through first, second, and third sections of a core assembly. At least one of the bodies is rotatable about its axis. The inner and outer bodies have intermeshed inner and outer helical blades wound about the inner and outer axes and extending radially outwardly and inwardly respectively. The helical blades have first, second, and third twist slopes in the first, second, and third sections respectively. A combustor section extends through at least a portion of the second section.

Giffin, Rollin George↗
NASA NTRS1990

On oscillatory flow over topography in a rotating fluid

Quasi-geostrophic beta-plane motion of a homogeneous liquid over topography is considered for situations in which there is a time-periodic forcing of a zonal current. Such an oscillatory current generates a topographic Rossby wave response that has a complicated, but periodic, temporal structure. The linear solution grows resonances at all integer values of the beta-parameter. The nonlinear analysis demonstrates that for weak friction and forcing, the resonances are bent and multiple equilibria of the time-dependent Rossby wave states are possible in certain parameter ranges. While the basic forced flow in the absence of topography has no time-mean, the nonlinear amplitude equations show that a mean retrograde (westward) Eulerian zonal flow is generated in the interactions of the forced flow with the topography.

Hart, J. E.↗
NASA NTRS1998

The Role of Marangoni Convection for the FZ-Growth of Silicon

Fluctuations of the electrical resistivity due to inhomogeneous dopant distribution are still a serious problem for the industrial processing yield of doped silicon crystals. In the case of silicon floating-zone growth, the main sources of these inhomogeneities are time- dependent flows in the liquid phase during the growth process. Excluding radio frequency (RF) induced convection, buoyancy and thermocapillary (Marangoni) convection are the two natural reasons for fluid flow. Both originate from temperature/concentration gradients in the melt, buoyancy convection through thermal/concentrational volume expansion, and thermocapillary convection through the temperature/concentration dependence of the surface tension. To improve the properties of grown crystals, knowledge of the strength, the characteristic, and the relation of these two flow mechanisms is essential. By the use of microgravity, the effect and the strength of buoyancy (gravity dependent) and thermocapillary (gravity independent) convection can be separated and clarified. Applying magnetic fields, both convective modes can be influenced: fluid flow can either be damped (static magnetic fields) or overlaid by a regular flow regime (rotating magnetic fields). Two complementary approaches have been pursued: Silicon full zones (experiments on the German sounding rockets TEXUS 7, 12, 22, 29, and 36) with the maximum temperature at half of the zone height and silicon half zones (experiments on the Japanese sounding rockets TR-IA4 and 6) with the maximum temperature at the top of the melt. With the full zone arrangement, the intensity and the frequency of the dopant striations could be determined and the critical Marangoni number could be identified. The half zone configuration is suited to classify the flow pattern and to measure the amplitude and the frequency of temperature fluctuations in the melt by inserting thermocouples or temperature sensors into the melt. All experiments have been carried out in monoellipsoid mirror furnaces. Typical zone geometries are approx. 8 to 14 mm in diameter and height. The crystals grown under microgravity are compared to crystals grown in static axial magnetic fields (B<5 tesla) and in transversal rotating magnetic fields (B<7.5 mT / f=50 Hz). Experimental results are completed by 3D numerical simulations: the obtained temperature and concentration distribution in the melt confirm the damping effect of rotating magnetic fields and explain the change in the radial segregation under static magnetic fields.

Dold, P.↗
NASA NTRS1980

An alternative approach to the numerical simulation of steady inviscid flow

A numerical procedure for the efficient simulation of steady inviscid flow is described and its utility is demonstrated. The method is uniformly valid for application in the subsonic, transonic and supersonic flow regimes. It does not rely on the introduction of additional assumptions beyond those necessary to obtain the Euler equations from the Navier-Stokes equations, nor does it make use of a time-asymptotic solution of the unsteady equations of motion. Application of the herein-defined surrogate equation technique allows the formulation of stable, fully-conservative, type-dependent finite difference equations for use in obtaining numerical solutions to systems of first-order partial differential equations, such as the steady-state Euler equations or their various approximations. Computational results are presented for the full Euler equations used to simulate rotational subsonic flow and for the transonic small disturbance equations. For the latter case, a computational efficiency greater than that obtained by means of the standard perturbation potential approach is indicated.

Johnson, G. M.↗
NASA NTRS1992

Theoretical and computational study of rotating isotropic turbulence

The various flow regimes that occur in rotating isotropic turbulence and their associated turbulence structure are studied. Direct numerical simulations are conducted for moderate and rapid rotation rates and comparisons are made with the predictions of generalized Eddy Damped Quasi-Normal Markovian (EDQNM) approximations. It is shown that at high rotation rates the nonlinear transfer terms remain small and that the development of the spectrum is through pure viscous decay. This shows that the effect of rapid rotation on the turbulence kinetic energy is through the shutting off of the production term in the dissipation rate equation. At moderate and relatively rapid rates, the rotation causes a discernible anisotropy to develop in the integral length scale with a mild trend toward a two-dimensionalization of the flow. As the flow decays, the Rossby number decreases, leading again to the shutting off of the nonlinear transfer terms. For extremely rapid rotation rates, the anisotropies in the integral length scales are small and direct numerical simulation results are in good agreement with rapid distortion theory.

Mansour, N. N.↗
NASA NTRS1997

Vortex leading edge flap assembly for supersonic airplanes

A leading edge flap (16) for supersonic transport airplanes is disclosed. In its stowed position, the leading edge flap forms the lower surface of the wing leading edge up to the horizontal center of the leading edge radius. For low speed operation, the vortex leading edge flap moves forward and rotates down. The upward curve of the flap leading edge triggers flow separation on the flap and rotational flow on the upper surface of the flap (vortex). The rounded shape of the upper fixed leading edge provides the conditions for a controlled reattachment of the flow on the upper wing surface and therefore a stable vortex. The vortex generates lift and a nose-up pitching moment. This improves maximum lift at low speed, reduces attitude for a given lift coefficient and improves lift to drag ratio. The mechanism (27) to move the vortex flap consists of two spanwise supports (24) with two diverging straight tracks (64 and 68) each and a screw drive mechanism (62) in the center of the flap panel (29). The flap motion is essentially normal to the airloads and therefore requires only low actuation forces.

Rudolph, Peter K. C.↗
NASA NTRS1971

Film stability in a vertical rotating tube with a core-gas flow.

The linear hydrodynamic stability of a thin-liquid layer flowing along the inside wall of a vertical tube rotating about its axis in the presence of a core-gas flow is examined. The stability problem is formulated under the conditions that the liquid film is thin, the density and viscosity ratios of gas to liquid are small and the relative (axial) pressure gradient in the gas is of the same order as gravity. The resulting eigenvalue problem is first solved by a perturbation method appropriate to axisymmetric long-wave disturbances. The damped nature (to within the thin-film and other approximations made) of the nonaxisymmetric and short-wave disturbances is noted. In view of the limitations on a truncated perturbation solution when the disturbance wavenumber is not small, an initial value method using digital computer is presented. Stability characteristics of neutral, growing, and damped modes are presented showing the influences of rotation, surface tension, and the core-gas flow. Energy balance in a neutral mode is also illustrated.

Sarma, G. S. R.↗
NASA NTRS1985

Laser velocimeter measurements of the flow fields around single- and counter-rotation propeller models

A two-component LV system was used to make detailed measurements of the flow field around both a single-rotation and a counter-rotation propeller/nacelle. The conditions measured for the single-rotation tractor configuration include two different blade angles and two propeller advance ratios, and for the counter-rotation propeller configuration include both pusher and tractor mounts. The measurements show the increasing slipstream velocities and contraction with increasing blade angle and with decreasing advance ratios. Data for the counter-rotation system show that the aft propeller turns the flow in the opposite direction from the front propeller. Additionally, the LV system was used as a diagnostic tool to provide data to explain the large side force measured on the propeller/nacelle at angle-of-attack.

Dunham, D. M.↗
NASA NTRS2016

Bridgman Growth of Germanium and Germanium-Silicon Crystals under Microgravity

Four different Bridgman growth experiments on Ge:Ga and Ge(sub x)Si(sub 1-x) were performed under microgravity during the FOTON M4 flight in fall 2014 as joint German-Russian experiments. The experiments were also part of the RDGS/ICESAGE project(s) of ESA/NASA on detached growth of Ge and Ge-Si. Three experiments on Ge:Ga investigated different heat and mass transport regimes, i.e. mostly diffusive conditions, flows driven by a rotating magnetic field, and flows driven by vibration. The fourth experiment on Ge(sub 0.98)Si(0.02) investigated detached growth. All four experiments were successful and yielded crystals. Both the Ge-Si experiment and two of the Ge:Ga experiments showed stable detachment from the ampoule wall, although this was not planned for the latter two experiments. The influence of the rotating magnetic field as well as of the vibration was pronounced in the case of the microgram experiments, but dominated by buoyancy convection under 1g.

Croell, A.↗
NASA NTRS1998

A Search for Giant Convection Cells on the Sun

Giant convection cells (slow, long-lived cellular flows in the Sun's convection zone with typical diameters greater than about 100,000 km) have been the subject of many searches over the last 30 years. If such flows exist, they should play a key role in structuring the Sun's large scale magnetic field and in driving the large scale axisymmetric flows: the differential rotation and meridional circulation. Detailed observations of the flows in these cells may also allow us to better predict future magnetic field configurations and the solar activity associated with them. Line-of-sight velocity data from the Michelson Doppler Interferometer on the ESA/NASA Solar and Heliospheric Observatory provides us with new opportunities to search for giant cells. This data is free of any atmospheric distortion and has been obtained continuously without any day/night gaps for more than two months at a time. These two-month datasets are important because giant cells are expected to have lifetimes somewhat longer that the Sun's 27 day rotation period. Any reappearance of a flow pattern after 27 days would be an important confirmation of the existence of these cells. The approach taken in this search is to separate the giant cell velocity signal from the other, stronger velocity signals by using a spherical harmonic representation of the spatial structures and a fourier decomposition of the temporal behavior. Any giant cell signal should be characterized by low spatial wavenumbers with temporal frequencies appropriate to the solar rotation of these patterns.

Hathaway, David H.↗
DOE OSTI2020

In situ indentation and high cycle tapping deformation responses in a nanolaminate crystalline/amorphous metal composite

The incorporation of nanostructured and amorphous metals into modern applications is reliant on the understanding of deformation and failure modes in constrained conditions. To study this, a 105 nm crystalline Cu/160 nm amorphous Cu 45 Zr 55 (at.%) multilayer structure was fabricated with the two crystalline layers sputter deposited between the top-middle-bottom amorphous layers and prepared to electron transparency. The multilayer was then in situ indented either under a single load to a depth of ~ 100 nm (max load of ~ 100 μN) or held at 20 μN and then repeatedly indented with an additional 5 μN up to 20,000 cycles in a transmission electron microscope to compare the deformation responses in the nanolaminate. For the single indentation test, the multilayer showed serrated load-displacement behavior upon initial indentation inductive of shear banding. Additionally, at an indentation depth of ~ 32 nm, the multilayer exhibited perfect plastic behavior and no strain hardening. Both indented and fatigue-indented films revealed diffraction contrast changes with deformation. Subsequent Automated Crystal Orientation Mapping (ACOM) measurements confirmed and quantified global texture changes in the crystalline layers with specifically identified grains revealing rotation. Using a finite element model, the in-plane displacement vectors under the indent mapped conditions where ACOM determined grain rotation was observed, indicating the stress flow induced grain rotation. Furthermore, the single indented Cu layers also exhibited evidence of deformation induced grain growth, which was not evident in the fatigue-indented Cu based multilayer. Finally, the single indented multilayer retained a significant plastic crater in the upper most amorphous layer that directly contacted the indenter; a negligible crater impression in the same region was observed in the fatigued tested multilayer. These differences are explained by the different loading methods, applied load, and deformation mechanisms experienced in the multilayers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Experimental pub crawl from Rayleigh–Bénard to magnetostrophic convection

The interplay between convective, rotational and magnetic forces defines the dynamics within the electrically conducting regions of planets and stars. Yet their triadic effects are separated from one another in most studies, arguably due to the richness of each subset. In a single laboratory experiment, we apply a fixed heat flux, two different magnetic field strengths and one rotation rate, allowing us to chart a continuous path through Rayleigh–Bénard convection (RBC), two regimes of magnetoconvection, rotating convection and two regimes of rotating magnetoconvection, before finishing back at RBC. Dynamically rapid transitions are determined to exist between jump rope vortex states, thermoelectrically driven magnetoprecessional modes, mixed wall- and oscillatory-mode rotating convection and a novel magnetostrophic wall mode. Thus, our laboratory ‘pub crawl’ provides a coherent intercomparison of the broadly varying responses arising as a function of the magnetorotational forces imposed on a liquid-metal convection system.

42 ENGINEERING↗
DOE OSTI2025

The Impacts of Rotational Mixing on the Precipitation Simulated by a Convection Permitting Model

With increased availability of computational resources, regional and global scale convection-permitting model (CPM, Δx ~ 1–10 km) simulations are becoming more common. CPMs have improved accuracy in their representation of deep convection and mesoscale convective systems (MCSs) compared to coarser resolution models. However, CPMs still exhibit convective cloud and precipitation biases relative to observations, notably a lesser frequency of light precipitation rates and greater frequency of heavy precipitation rates. In this work we hypothesize that these CPM biases are related to under-resolved mixing between convective updrafts and their surrounding environment. To test this hypothesis, we introduce a parameterization to the Weather Research and Forecasting model (WRF) that adds a small angular rotation of the grid-scale flow about the axis perpendicular to the plane of convective drafts. This rotated flow is then allowed to alter advection of moisture and hydrometeors. The effects of such mixing on precipitation characteristics are evaluated in month-long 4-km grid spacing simulations over the Amazon. The enhanced mixing transports moisture and condensate from convective cores to other areas including downdrafts. This increases the frequency of low-precipitable water and light precipitation. It also decreases the frequency of intense precipitation from isolated deep convection and MCSs, increases cloud top temperatures, reduces radar echo-top heights, and increases overall precipitation by altering the relationship of precipitation with precipitable water, in better agreement with observations. The results suggest when optimized using multiple observations, such an approach may provide a path toward more accurate representation of convection and precipitation statistics in convection-permitting simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Changes within the central stalk of E. coli F 1 F o ATP synthase observed after addition of ATP

F 1 F o ATP synthase functions as a biological generator and makes a major contribution to cellular energy production. Proton flow generates rotation in the F o motor that is transferred to the F 1 motor to catalyze ATP production, with flexible F 1 /F o coupling required for efficient catalysis. F 1 F o ATP synthase can also operate in reverse, hydrolyzing ATP and pumping protons, and in bacteria this function can be regulated by an inhibitory ε subunit. Here we present cryo-EM data showing E. coli F 1 F o ATP synthase in different rotational and inhibited sub-states, observed following incubation with 10 mM MgATP. Our structures demonstrate how structural transitions within the inhibitory ε subunit induce torsional movement in the central stalk, thereby enabling its rotation within the F ο motor. This highlights the importance of the central rotor for flexible coupling of the F 1 and F o motors and provides further insight into the regulatory mechanism mediated by subunit ε.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Non-linear MHD modelling of edge localized modes suppression by resonant magnetic perturbations in ITER

Edge localized modes (ELMs) suppression by resonant magnetic perturbations (RMPs) was studied with the non-linear magneto-hydro-dynamic (MHD) code JOREK for the ITER H-mode scenarios at 15 MA, 12.5 MA, 10 MA/5.3 T. In this study, the main aim was to demonstrate that ELMs can be suppressed by RMPs while the divertor 3D footprints of heat and particle fluxes remain within divertor material limits. The unstable peeling–ballooning modes responsible for ELMs without RMPs were modelled first for each scenario using numerically accessible parameters for ITER. Then the stabilization of ELMs by RMPs was modelled with the same parameters. RMP spectra, optimized by the linear MHD MARS-F code, with main toroidal harmonics N = 2, N = 3, N = 4 have been used as boundary conditions of the computational domain of JOREK, including realistic RMP coils, main plasma, scrape off layer (SOL) divertor and realistic first wall. The model includes all relevant plasma flows: toroidal rotation, two fluid diamagnetic effects and neoclassical poloidal friction. With RMPs, the main toroidal harmonic and the non-linearly coupled harmonics remain dominant at the plasma edge, producing saturated modes and a continuous MHD turbulent transport thereby avoiding ELM crashes in all scenarios considered here. The threshold for ELM suppression was found at a maximum RMP coils current of 45 kAt–60 kAt compared to the coils maximum capability of 90 kAt. In the high beta poloidal steady-state 10 MA/5.3 T scenario, a rotating QH-mode without ELMs was observed even without RMPs. In this scenario with RMPs N = 3, N = 4 at 20 kAt maximum current in RMP coils, similar QH-mode behaviour was observed however with dominant edge harmonic corresponding to the main toroidal number of RMPs. The present MHD modelling was limited in time by few tens of ms after RMPs were switched on until the magnetic energy of the modes saturates. As a consequence the thermal energy was still evolving on this time scale, far from the ITER confinement time scale and hence only the form of 3D footprints on the divertor targets can be indicated within this set-up. Also note, that the divertor physics was missing in this model, so realistic values of fluxes are out of reach in this modelling. However the stationary 3D divertor and particle fluxes could be simply extrapolated from these results to the stationary situation considering that a large power fraction should be radiated in the core and SOL and only about 50 MW power is going to the divertor, which is an arbitrary, but reasonable number used here. The 3D footprints with RMPs show the characteristic splitting with the main RMP toroidal symmetry. The maximum radial extension of the footprints typically was ~20 cm in inner divertor and ~40 cm in outer divertor with stationary heat fluxes decreasing further out from the initial strike point from ~5 MW m ₋2 to ~1 MW m ₋2 assuming a total power in the divertor and walls is 50 MW. The heat fluxes remain within the divertor target and baffle areas, however with rather small margin in the outer divertor which could be an issue for the first wall especially in transient regimes when part of the plasma thermal energy is released due to switching on the RMP coils. This fact should be considered when RMPs are applied with a more favorable application before or soon after the L–H transition, although optimization is required to avoid increasing the L–H power threshold with RMPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Aero-Thermal Characterization of Accelerating and Diffusing Passages Downstream of Rotating Detonation Combustors

Cycle benefits of rotating detonation engines show up to five percentage points of efficiency gain for low-pressure ratio engines. An optimal integration between the combustor and the turbine needs to be guaranteed to realize this potential gain. The rotating detonation combustor (RDC) exhausts transonic flow with shocks rotating at frequencies ranging from a few to tens of kilohertz depending on the number of present waves. Hence, the turbine design requires precise knowledge of the fluctuations and losses downstream of the combustor. This paper focuses on the quantification of fluctuations and losses for accelerating and diffusing passages. The analysis of the combustor is performed via reactive unsteady Reynolds Averaged Navier-Stokes (URANS) simulations. The unsteady RANS equations are solved via CFD++ from Metacomp with a one-step reaction mechanism for an H2-air mixture. The resolving of the boundary layer is achieved with a structured mesh of around 36 million cells. Inlet pressure of 10 bar and two different back pressures are applied to the combustor to model the interconnection with downstream turbines. Finally, we present and assess a methodology to reduce the computational time to model these passages ten times.

Braun, James↗