Search NASA⌕ Search

SEARCH · Search NASA

Results for “simulation technique”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Recent progress in numerical techniques for flow simulation

Recent developments in the use of numerical methods for fluid flow simulation show an increasing tendency to use numerical operators that can, in various ways, be factored. Use of methods having this property often increases the accuracy and efficiency of computer codes. Tracing the factorization property provides a unity to the basic concepts involved in the development of cyclic reduction, predictor-corrector, splitting, fast Fourier transform, and pseudospectral methods.-

Lomax, H.↗
NASA NTRS1984

Design of an orbital heating simulator using IR techniques

The design of an IR rig to supply and monitor radiation fluxes in order to verify a thermal math model is discussed. The design incorporates IR lamps, Calrods and baffles to best suit the requirements of the specific zones. The required fluxes are calculated from the IR lamp/Calrod configuration software which can account for the effect of specular baffles and surface absorptivities. Radiation intensities are measured using the absorbed flux technique. Sensors, with surface properties matched to the appropriate spacecraft zone, are calibrated under conditions identical to test. The rig itself is capable of reproducing all test conditions and is versatile enough to handle other spacecrafts.

Donato, M.↗
NASA NTRS1983

A comparison of rating scale, secondary-task, physiological, and primary-task workload estimation techniques in a simulated flight task emphasizing communications load

Sixteen potential metrics of pilot mental workload were investigated regarding their sensitivity to communication load and their intrusion on primary-task performance. A moving-base flight simulator was used to present three cross-country flights. The flights varied only in the difficulty of the communications requirements. Rating scale measures were obtained immediately postflight; all others were taken over a 7-min segment of the flight task. The results indicated that both the Modified Cooper-Harper Scale and the workload Multi-descriptor Scale were sensitive to changes in communications load. The secondary-task measure of time estimation and the physiological measure of pupil diameter were also sensitive. As expected, those primary-task measures that were direct measures of communicative performance were also sensitive to load, whereas aicraft control primary-task measures were not, attesting to the task specificity of such measures. Finally, the intrusion analysis revealed no differential interference between workload measures.

Casali, J. G.↗
NASA NTRS1984

Flight test techniques for validating simulated nuclear electromagnetic pulse aircraft responses

An attempt has been made to determine the effects of nuclear EM pulses (NEMPs) on aircraft systems, using a highly instrumented NASA F-106B to document the simulated NEMP environment at the Kirtland Air Force Base's Vertically Polarized Dipole test facility. Several test positions were selected so that aircraft orientation relative to the test facility would be the same in flight as when on the stationary dielectric stand, in order to validate the dielectric stand's use in flight configuration simulations. Attention is given to the flight test portions of the documentation program.

Winebarger, R. M.↗
NASA NTRS1991

The Development of High Order Numerical Techniques for Reentry Simulation of Hypersonic Spacecraft

The primary difficulty encountered when simulating hypersonic flow is that the flow normally includes strong nonlinear discontinuities. These discontinuities fall into three broad classes: shocks, slip-lines, and rarefaction waves. Moreover, in the hypersonic flow regime, the chemistry of hot gases plays a vital role and can not be neglected. These facts combine to make the numerical treatment of spacecraft reentry a most challenging problem. In this work, we develop a class of finite difference schemes that accurately resolve discontinuous solutions to spacecraft reentry flow and are simple to incorporate into existing spacecraft reentry codes.

Sanders, Richard↗
NASA NTRS1993

Large-eddy simulations of compressible convection on massively parallel computers

We report preliminary implementation of the large-eddy simulation (LES) technique in 2D simulations of compressible convection carried out on the CM-2 massively parallel computer. The convective flow fields in our simulations possess structures similar to those found in a number of direct simulations, with roll-like flows coherent across the entire depth of the layer that spans several density scale heights. Our detailed assessment of the effects of various subgrid scale (SGS) terms reveals that they may affect the gross character of convection. Yet, somewhat surprisingly, we find that our LES solutions, and another in which the SGS terms are turned off, only show modest differences. The resulting 2D flows realized here are rather laminar in character, and achieving substantial turbulence may require stronger forcing and less dissipation.

Xie, Xin↗
NASA NTRS1959

Comparison of Rocket Performance using Exhaust Diffuser and Conventional Techniques for Altitude Simulation

A rocket engine with an exhaust-nozzle area ratio of 25 was operated at a constant chamber pressure of 600 pounds per square inch absolute over a range of oxidant-fuel ratios at an altitude pressure corresponding to approximately 47,000 feet. At this condition, the nozzle flow is slightly underexpanded as it leaves the nozzle. The altitude simulation was obtained first through the use of an exhaust diffuser coupled with the rocket engine and secondly, in an altitude test chamber where separate exhauster equipment provided the altitude pressure. A comparison of performance data from these two tests has established that a diffuser used with a rocket engine operating at near-design nozzle pressure ratio can be a valid means of obtaining altitude performance data for rocket engines.

Sivo, Joseph N.↗
NASA NTRSDate not supplied

Derivation of Effective Properties Based on Porous Scale Simulations Using Filtering Techniques

This study presents a method for derivation of effective properties at the interface and in-depth of porous materials. The method defines a Representative Elementary Volume (REV) and applies filtering techniques to computer effective properties such as porosity and flow quantities, such as velocity and pressure. The script, developed to process the data was tested on the VTK type files that contain the mesh information and the flow solution. The method allows to choose between two types of filters, such as cellular and top-hat and define the size of the REV and number of samples along the domain. Extraction of the REV from the domain is performed to exact boundaries requested for the user. This is done using a triangulation technique and cutting through the cells to comply to the requested boundaries of the volume. The method can be applied to both structured and unstructured meshes. Filtering the material porosity and flow quantities involves integration of the numerical data. The algorithm provides three integration methods, such as Riemann sum, Monte Carlo and Quadrature rule to perform the integration. The Monte-Carlo technique permits the use of either uniform or linearly spaced distribution of points. The Quadrature rule is currently applicable to tetrahedral element types. The Monte Carlo and Quadrature rule methods require interpolation of the flow quantities at the sample points. For interpolation, two methods were tested and are readily available, Gaussian interpolation and re-sampling. It has been shown that re-sampling method has better consistency and acceptable accuracy in interpolation of the data. The algorithm was written in Python language and uses a number of modules. The major module besides numpy is PyVista. It is used to process the computational domain, clip the REV and interpolate the data. Quadrature rule integration was performed using a quadpy module. ParaView software was used externally to convert the flow solution to the VTK (or more specifically VTU) format. Integration of ParaView in the same environment with PyVista encountered problems and could not be implemented in this work. The developed algorithm is expected to be applicable to unstructured meshes and more complex porous structures as soon as the data can be passed in VTK type format. With the report is provided Python script for filtering the solution and a Matlab script for simple generation and processing of 2-D and 3-D porous channel geometries. The two scripts don't communicate.

Alexsander Zibitsker↗
NASA NTRS1989

A model for including thermal conduction in molecular dynamics simulations

A technique is introduced for including thermal conduction in molecular dynamics simulations for solids. A model is developed to allow energy flow between the computational cell and the bulk of the solid when periodic boundary conditions cannot be used. Thermal conduction is achieved by scaling the velocities of atoms in a transitional boundary layer. The scaling factor is obtained from the thermal diffusivity, and the results show good agreement with the solution for a continuous medium at long times. The effects of different temperature and size of the system, and of variations in strength parameter, atomic mass, and thermal diffusivity were investigated. In all cases, no significant change in simulation results has been found.

Wu, Yue↗
NASA NTRS1976

A single axis study of flight simulator kinematics by difference techniques

The kinematic parameters of position, velocity, and acceleration of a flight simulator may be calculated by knowing the distance between two or more points on an axis and the time the simulator takes to traverse the space between each set of points. These parameters are calculated through the use of difference techniques. Given the true kinematic response of the simulator to computer generated commands, the entire motion system loop may be calibrated, and system operability verified.

Webster, L. D.↗
NASA NTRS1984

Tape heating method for space simulation testing

An ohmic heating technique for simulating the solar heat input to a spacecraft during space environment testing was developed. Tests of spacecraft radiator sample panels were used to evaluate the heating method for its potential hazard to sensitive surfaces and for its application accuracy prior to use in full scale thermal vacuum tests of flight spacecraft and thermal models.

Presley, H. W.↗