Search NASA⌕ Search

SEARCH · Search NASA

Results for “source potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Insights into Na + Diffusion in Silicon Modules under Operating Conditions: Measuring Low Concentrations by D-SIMS

Sodium induced shunting under an electric field is a challenging reliability issue in crystalline Si solar modules. The source of this Potential-Induced Degradation of the Shunting type (PID-s) is well understood and its influence on power loss has been intensively studied based on phenomenological models on cell or module level relating the experimental power-loss to stressing parameters (time, temperature, voltage). However, little is known about the Na ion migration kinetics, responsible for PID on a microscopic level, and its quantitative relation to the efficiency degradation. In this paper we present our investigations of sodium ion migration in Ethylene-Vinyl Acetate (EVA) and silicon through Dynamic Secondary Ion Mass Spectroscopy (D-SIMS). Each sample was annealed at field relevant temperatures from 60-90 °C to address typical migration mechanisms of common PV installations. Analysis of the SIMS migration profiles revealed a diffusivity constant D 0,EVA = 0.09 ± 0.14 cm 2 /s and an activation energy E A,EVA = 0.85 ± .04 eV for Na in EVA and diffusivities higher than extrapolated literature values in silicon (D 0,Si = (3.03 ± 2.42)x10 -5 cm 2 /s, and E A,Si = 0.98 ± 0.02 eV). The new insight will be included in a drift-diffusion based degradation model accounting for the partition coefficient across all relevant interfaces. This model can assist in predicting PID-failure in the field based on the given model stack and the diffusion of Na + through each material. Furthermore, this tool can be used for process optimization as well as material selection significantly reducing the cost and time to validate a technology.

14 SOLAR ENERGY↗
DOE OSTI2021

Ultralow-threshold thin-film lithium niobate optical parametric oscillator

Materials with strong second-order ( χ <#comment/> ( 2 ) ) optical nonlinearity, especially lithium niobate, play a critical role in building optical parametric oscillators (OPOs). However, chip-scale integration of low-loss χ <#comment/> ( 2 ) materials remains challenging and limits the threshold power of on-chip χ <#comment/> ( 2 ) OPO. Here we report an on-chip lithium niobate optical parametric oscillator at the telecom wavelengths using a quasi-phase-matched, high-quality microring resonator, whose threshold power ( ∼ <#comment/> 30 µ <#comment/> W ) is 400 times lower than that in previous χ <#comment/> ( 2 ) integrated photonics platforms. An on-chip power conversion efficiency of 11% is obtained from pump to signal and idler fields at a pump power of 93 µW. The OPO wavelength tuning is achieved by varying the pump frequency and chip temperature. With the lowest power threshold among all on-chip OPOs demonstrated so far, as well as advantages including high conversion efficiency, flexibility in quasi-phase-matching, and device scalability, the thin-film lithium niobate OPO opens new opportunities for chip-based tunable classical and quantum light sources and provides a potential platform for realizing photonic neural networks.

Lu, Juanjuan (ORCID:0000000319389119)↗
DOE OSTI2026

Electrically tunable nonlinear light generation in plasmonic tunnel junctions

Active and efficient control of nonlinear optical processes is essential for integrated photonics, with applications in signal processing, ultrafast switching, and quantum light manipulation. While nanophotonic structures are powerful for enhancing nonlinearities, achieving wide-range electrical tunability has remained a challenge. Plasmonic tunnel junctions offer a unique path to bridge this gap because they combine extreme optical field confinement with direct electrical control in a single nanoscale device. Here, we report the first, to our knowledge, demonstration of electrically tunable second-harmonic generation (SHG) in plasmonic tunnel junctions. Using ultra-stable epitaxial heterostructures, we achieve reproducible modulation of SHG with depths up to ∼500% and magnitudes above 1.3V −1 . We identify two mechanisms, electric-field-induced SHG (EFISH) and ion migration, that can either compete or cooperate depending on junction thickness and bias, enabling both broad tunability and ferroelectric-like hysteretic switching. These findings establish plasmonic tunnel junctions as a platform for electrically controlled nonlinear optics, with potential for nanoscale light sources, reconfigurable modulators, and neuromorphic photonic devices..

42 ENGINEERING↗
DOE OSTI2020

Wood-to-Fuel for California's Transportation Sector using Autothermal Pyrolysis (FRD-17-002 Progress Report)

Both our subcontract with ISU and the one with Frontline have been finalized and the requisitions for the initiation of them have been submitted (this places defined amounts of funding available to the subcontracts, for the first allotment of work to be done, for which we already have funds from the CEC). Once the requisitions are approved, the subcontracts will be fully executed. During the month of August, further work on the Market Report was carried out, and will continue, as this is the most adaptable of the LLNL-main tasks to working remotely, so will not have any delays due to the shelter-in-place orders. Organization of our databases and sources on availability, and potential availability of all woody biomass was continued. Tables and figures for the report were begun as well, and the outline was finalized. Additionally, a parametric study for pyrolysis’ different products was done, with a metric of return on capital investment being chosen. Evaluated parameters include feedstock price, CO2 credit price, CO2 transport cost, and minimum fuel selling price, for drop-in fuels.

09 BIOMASS FUELS↗
DOE OSTI2021

Atmospheric Electric Field-Mill Sensor Field Campaign Report

The foundation stone of atmospheric electricity is the existence of a Global Electric Circuit (GEC) influencing all of the planet. In fact, global thunderstorm activity acts as a voltage source that imposes a potential difference between the ionosphere (positively charged) and the Earth’s surface (negatively charged) of about ~300 kV. Such potential difference is discharged through the poorly conducting atmosphere in fair-weather regions, with atmospheric electric fields of ~100 V/m. First evidence of the GEC was gathered by scientists involved on the Carnegie vessel expeditions (early 20th Century), in which they describe a similar daily variation of the atmospheric electric field in different parts of the Pacific Ocean. Such variation become known as the Carnegie Curve (CC).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Integrated Process Testing of MSR Salt Spill Accidents

Part of the licensing process for new nuclear reactors requires vendors to assess the potential consequences of identified accident scenarios using accident progression modeling. The accident scenario that will likely be evaluated by all molten salt reactor (MSR) developers is a spill of radionuclide-bearing fuel salt onto the reactor containment floor (i.e., a salt spill accident). The development of accident progression models requires experimental data to inform which processes to incorporate, to enable the calculation of parameters to model these processes, and to validate the model predictions. The data should quantify the sensitivities of key processes (e.g., molten salt spreading, heat transfer, containment structure corrosion, radionuclide vaporization, and aerosol generation) towards the initial conditions of the spill, the ambient environment, and the features of the containment. In addition, results from integrated process tests that quantify coupled processes are required to validate systems-level models. This report documents results from integrated process tests conducted on simulated molten salt spill accidents. The generated experimental data simultaneously quantify the heat transfer behavior of the spilled salt, compositional changes to the bulk salt, and the release of surrogate fission products from the spilled salt as aerosol particles. All tests that were conducted used FLiNaK doped with surrogate fission products, and the variables that were evaluated included the initial salt temperature and the concentration of surrogate fission products present in the salt. The major accomplishments of this work include identifying surrogate fuel salt compositions that provide insight into the dispersal behavior of radionuclides of potential significance to the source term, employing previously developed methods and measurement techniques to simultaneously measure key processes, generating data on the coupled processes of molten salt heat transfer and surrogate fission product release as aerosol particles, demonstrating new test methods for real-time monitoring of the flow rate of the spill and aerosol size quantification in an argon atmosphere, and developing a mass transfer model for cesium and iodine release from molten FLiNaK to provide insight into aerosol formation by vapor condensation. The same methodology applied herein can be employed to study different salt compositions of interest to MSR developers, different environmental conditions, and other variables that are relevant to postulated accident scenarios. The insights gained from these integrated process tests conducted at a laboratory scale will be incorporated into future integral effects tests conducted at an engineering scale.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Second Target Station Project: STS/PSD/ESTD Workshop on Batteries and Energy Storage

Oak Ridge National Laboratory's (ORNL) upcoming Second Target Station (STS) at the Spallation Neutron Source (SNS) provides a substantial leap forward in neutron scattering capabilities, offering high-brightness cold neutron sources that have the potential to revolutionize the study of energy materials. This report highlights the outcomes of a cross-directorate workshop on Batteries and Energy Storage held in September 2023, which brought together stakeholders from the STS Project, the Physical Sciences Directorate (PSD), the Energy Science and Technology Directorate (ESTD), and the Neutron Sciences Directorate (NScD).

25 ENERGY STORAGE↗
DOE OSTI2023

Hybrid physics-based and machine learning tools for materials assessment

In this work, we develop novel physics-based and machine learning computational techniques to predict fundamental properties of metallic systems that affect radiation damage behavior in reactor structural materials. Oftentimes, atomistic predictions of engineering alloys simplify chemical compositions to a single element to reduce computational cost and complexity, introducing large sources of uncertainty and potentially missing important behavior. In addition, engineering alloys such as SS 316 are particularly challenging to simulate with first principles methods because of the additional degrees of freedom introduced by magnetic natures of the constituent elements, and very little data of this type exists within the literature. These novel methods aim to improve the qualitative prediction of radiation damage in engineering alloys by more accurately simulating their compositions, both by accelerating the computations and by developing novel analyses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Considerations for Defining G-Values for Aluminum-Clad Spent Nuclear Fuel

Sealed-canister dry storage of aluminum-clad spent nuclear fuel (ASNF) generated by research reactors is an alternative to current storage and disposition pathways as directed by the U.S. Department of Energy. The major challenge faced for this storage approach is radiolytic H 2 generation, including from the aluminum (oxy)hydroxide layers on the surface of ASNF. Experimental and modeling activities have been carried out to characterize the radiolytic yield as part of a DOE-sponsored research program to develop the technical basis for ASNF dry storage. The G-value is a commonly way to report results of radiolysis testing and is defined as the radiolytic yield of a species (e.g. molecular hydrogen) per unit radiation energy deposited into the material system. An independent technical review of the ASNF dry storage technical basis performed by Pacific Northwest National Laboratory raised questions about differences in G-value definitions used for experiments on ASNF surrogates consisting of aluminum samples with adherent (oxy)hydroxides compared to G-values reported in prior literature and how the magnitudes compared between different studies. Material systems resembling ASNF pose complications for measuring/defining G-values to predict the evolution of H 2 in a sealed canister, including i) accounting for radiolytic yields potentially arising from multiple sources, i.e., residual free (vapor), physisorbed, and chemisorbed/chemically bound waters; ii) deciding what portions of the multi-material system to include in the absorbed energy (radiation dose) calculation, considering possible energy exchange between materials as well as measurement limitations, and iii) capturing variations in G-value associated with non-linear yield vs. dose curves and/or dependence on the cover gas. This report summarizes previous literature information on radiolytic H 2 generation and associated G-values from mixed-material systems (generally oxides in contact with water or organic compounds) and from (oxy)hydroxides/hydrates to compare with the definitions and values for ASNF surrogate samples containing adherent aluminum (oxy)hydroxides.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

4.3.1.1 TCF: Recovery of Lithium from Geothermal Brine with Lithium-Aluminum Layered Double Hydroxide Chloride Sorbents

Lithium has gained importance as a near-critical element for various energy storage applications, and efforts are ongoing to develop simple and cost-effective methods for lithium recovery. For instance, in a typical 50 MW geothermal power plant in the Salton Sea, United States, approximately 15,000 metric tons of Li 2 CO 3 or LiOH salts can be produced annually by recovering and converting LiCl from geothermal plant waste solutions. Currently, approximately 390 MW of geothermal power is generated in the Salton Sea Known Geothermal Resource Area, which corresponds to potential Li 2 CO 3 production of approximately 120,000 metric tons per year. This makes lithium recovery from geothermal brines a promising, potentially low-cost source of lithium, contributing significantly to the global supply chain.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

AssessCCUS: An Integrated Approach for Aggregating Resources to Enable Techno-Economic and Life Cycle Assessment of Carbon Management Technologies

Carbon capture, utilization, and storage (CCUS) - also sometimes known as carbon management - technologies are becoming an increasingly important part of the portfolio of technologies necessary to mitigate climate change and defossilize industrial production systems (Sick, 2021). These technologies capture carbon dioxide from industrial point sources or from the atmosphere directly and then either sequester it or use it as a carbon source in valuable products. Potential utilization pathways include, but are not limited to, concrete, fuels, and certain commodity chemicals, and sequestration pathways can include permanent geological storage or temporary storage in natural sinks ranging from forests to agricultural soil. Regardless of the pathway, assessment of the economic and environmental performance of the technologies is important for understanding their potential scalability and impact as well as developing plans to minimize life cycle costs and potential environmental trade-offs. A full discussion of potential trade-offs associated with CCUS is outside the scope of this article, but promoting assessment broadly helps to stimulate important conversations about the benefits and drawbacks of any particular technological choice.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Quantifying Moss Response to Metal Contaminant Exposure Using Laser-Induced Fluorescence

Tracing sources of contamination, including potentially toxic elements (PTEs), has historically been achieved through sampling and analysis of soil or biota, which are labor-intensive, costly, and destructive methods. Thus, availability of a non-destructive in situ remote sensing method for monitoring metals deposited in biota is of great interest. Laser-induced fluorescence (LIF) is an emerging spectroscopic and imaging technique that documents changes in molecular energy level in plants as a biological response to metal contamination. For a proof-of-concept study and preliminary experiment, moss was selected for experimentation due to its long history of use in tracing atmospheric deposition of PTEs. Consecutive treatments of copper chloride (CuCl2) were administered to three moss samples, simulating wet deposition every 48 h over 10 days until reaching cumulative Cu concentrations of 2.690 to 8.075 μmol/cm2. While these Cu amounts are above environmentally relevant concentrations, they allowed the best conditions for testing and fine tuning of the imaging and data processing protocols presented in this paper. Moss fluorescence was induced using both 532 nm green and 355 nm UV lasers. A CMOS camera captured images of the LIF response, and red–green–blue (RGB) decimal code values were extracted for each pixel in the images, and pixel densities of color channels from treated and untreated moss samples were compared. Results show a shift towards lower color decimal codes corresponding to increased Cu concentration. We developed and contrasted multiple quantitative analyses of color distributions and demonstrated that LIF shows great promise for remote sensing of Cu accumulation in moss at μmol/cm2 levels. Though currently, the method would be limited to highly toxic sites, it illustrates the possibility and provides a framework for development of higher-sensitivity methods to detect nmol/cm2 that are viable for urban contamination level monitoring.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2023

New Platinum Complexes from Salen- and Hydroxy-Substituted Salpn-Naphthalene Ligands with CO 2 Reduction Activity

The electrocatalytic reduction of carbon dioxide (CO 2 ) into added-value products is a promising alternative to completing the cycle of atmospheric CO 2 . We report two new platinum complexes—a salen-like naphthalene (PtL1) and a hydroxy-substituted salpn naphthalene (PtL2)—that are capable of activating CO 2 to produce carbon monoxide (CO). The predominant keto tautomer of the non-innocent ligands was determined using DFT calculations and UV-Vis spectroscopy. The PtL2 complex has a CO Faradaic efficiency >40% in the presence of water as a sacrificial proton source at -2.5 V vs. Fc/Fc + . The addition of the hydroxy group in combination with water as a proton source decreased the reduction potential and increased the CO formation tenfold when compared to PtL1.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Reburning of Animal Waste Based Biomass with Coals for NO x Reduction, Part II: Dairy Biomass (DB) and Coal–DB Blends

Concentrated animal feeding operations (both slaughter and dairy cattle) lead to land, water, and air pollution if waste storage and handling systems are not effectively managed. At the same time, cattle biomass (CB), which includes both slaughter/feedlot biomass (FB) and dairy biomass (DB), have the potential to be a source of green energy at coal-fired power plants. Part I presented results on NOx reductions with pure FB or Coal: FB blends as reburn fuels. Part II deals with results from reburning with pure DB or Coal: DB blends as reburn fuels. A mixture of NG with a small amount of NH3 was used to generate the baseline NOx of 400–420 ppm (or 185–194 g/GJ). NOx emissions were found to be reduced by as much as 96% when reburning with FB. The effects of reburn fuel type, equivalence ratio (ER RBZ ) in the reburn zone, vitiated air, several injection configurations of reburn fuel and initial NO concentrations on NOx emissions were investigated. The ER RBZ shows a significant effect on the NOx reduction. The 20% heat input by reburning was the better operating condition for the long-term operation due to its ash production. The results reveal that reburn with DB fuels is an effective technology for NOx emission control when the initial NOx emission is higher than 275 ppm (or 127 g/GJ or 0.3 lb/MMBtu).

09 BIOMASS FUELS↗
DOE OSTI2023

Antifungal and Phytotoxic Activities of Isolated Compounds from Helietta parvifolia Stems

The identification of natural and environmentally friendly pesticides is a key area of interest for the agrochemical industry, with many potentially active compounds being sourced from numerous plant species. In this study, we report the bioassay-guided isolation and identification of phytotoxic and antifungal compounds from the ethyl acetate extract of Helietta parvifolia stems. We identified eight compounds, consisting of two coumarins and six alkaloids. Among these, a new alkaloid, 2-hydroxy-3,6,7-trimethoxyquinoline-4-carbaldehyde (6), was elucidated, along with seven known compounds. The phytotoxicity of purified compounds was evaluated, and chalepin (4) was active against Agrostis stolonifera at 1 mM with 50% inhibition of seed germination and it reduced Lemna pausicotata (duckweed) growth by 50% (IC50) at 168 μM. Additionally, we evaluated the antifungal activity against the fungal plant pathogen Colletotrichum fragariae using a thin-layer chromatography bioautography assay, which revealed that three isolated furoquinoline alkaloids (flindersiamine (3), kokusagenine (7), and maculine (8)) among the isolated compounds had the strongest inhibitory effects on the growth of C. fragariae at all tested concentrations. Our results indicate that these active natural compounds, i.e., (3), (4), (7), and (8), could be scaffolds for the production of more active pesticides with better physicochemical properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Role of Electric Vehicles in the U.S. Power Sector Transition: A System-Level Perspective

After over a century of petroleum dominance many anticipate that electrification could disrupt the transportation energy landscape. At the same time, the electric power systems are undergoing profound changes: variable renewables are displacing conventional generation sources; distributed generation is disrupting utility business models; energy storage and other new technologies are emerging; and the traditional system based on the premise that generation is dispatched to match an inelastic demand is evolving to create a system with greater participation in power system planning and operations from traditionally passive consumers. In this context, it is important to understand how transportation electrification will impact electricity demand and in turn electricity supply, including changes in the load shapes that characterize the system and the opportunity to leverage flexible electric vehicle (EV) charging to better integrate demand and supply. Assessing the impacts of electrification on the energy system requires an understanding of how it might impact the amount and shape of electricity consumption, and how this electricity can be supplied. In particular, increased adoption of electric vehicles introduces a new source of demand altogether, potentially very flexible. Moreover, electrification could shift the consumption of natural gas between sectors, thereby affecting the economics for natural gas-fired generation relative to other electricity generation options. Several factors will impact the evolution of the power system under a widespread electrified future, which, in turn, could have far-reaching effects on future energy costs and emissions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Electrochemically modulated molten salt reactor

An electrochemically modulated molten salt reactor (EMMSR) that contains a vessel and a power source. The vessel houses a fuel salt, at least a portion of a neutron moderator, and at least a portion of an insulator. The fuel salt includes enough dissolved fissile isotopes to cause continued self-sustaining fission reactions during the operation of the EMMSR. The neutron moderator is configured to slow down fast neutrons produced by the dissolved fissile isotopes. The insulator is configured to electrically isolate the neutron moderator from the vessel. The power source has a positive potential and a negative potential. The positive potential is received by the neutron moderator and the negative potential is received by the vessel.

Jiang, Junhua↗
DOE OSTI2022

Biogas Biocatalysis

Biogas derived from anaerobic digestion of waste streams such as biorefinery wastewater, animal, agricultural, and municipal solid waste, offers a versatile renewable energy source. Total domestic methane potential from landfill material, animal manure, wastewater, and organic waste, combined with biogas generated from AD of lignocellulosic biomass, is estimated to offer >4 quadrillion Btu potential energy. This energy could displace nearly half of current domestic natural gas consumption in the electric power sector and all consumption in the transportation sector. However, despite this promise of this feedstock, its gaseous state prevents facile integration with extant transportation and industrial infrastructure. Microbial conversion of biogas to liquid fuel and chemical intermediates offers valorization potential. However, biogas biocatalysis is currently limited by poor substrate gas-to-liquid mass transfer, low conversion efficiencies, and incomplete biogas utilization. To this end, the Biogas Biocatalysis AOP aims to develop a carbon- and energy-efficient biogas bioconversion process via techno-economic-informed strain and fermentation engineering strategies. Efforts here will improve both process economics and sustainability via process-intensified, carbon-efficient biogas bioconversion to value-added platform molecules, enabling bolt-on deployment for valorization of biogas derived from standalone AD infrastructure.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS↗