Search NASA⌕ Search

SEARCH · Search NASA

Results for “splitting methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Application of a fractional-step method to incompressible Navier-Stokes equation

A numerical method for computing three dimensional, time dependent incompressible flows is presented. The method is based on a fractional step, or time-splitting, scheme in conjunction with the approximate-factorization technique. The use of velocity boundary conditions for the intermediate velocity field leads to inconsistent numerical solutions. Appropriate boundary conditions for the intermediate velocity field are derived and tested. Numerical solutions for flow inside a driven cavity and over a backward-facing step are presented and compared with experimenal data and other numerical results.

Kim, J.↗
NASA NTRS1986

Interface of the transport systems research vehicle monochrome display system to the digital autonomous terminal access communication data bus

An upgrade of the transport systems research vehicle (TSRV) experimental flight system retained the original monochrome display system. The original host computer was replaced with a Norden 11/70, a new digital autonomous terminal access communication (DATAC) data bus was installed for data transfer between display system and host, while a new data interface method was required. The new display data interface uses four split phase bipolar (SPBP) serial busses. The DATAC bus uses a shared interface ram (SIR) for intermediate storage of its data transfer. A display interface unit (DIU) was designed and configured to read from and write to the SIR to properly convert the data from parallel to SPBP serial and vice versa. It is found that separation of data for use by each SPBP bus and synchronization of data tranfer throughout the entire experimental flight system are major problems which require solution in DIU design. The techniques used to accomplish these new data interface requirements are described.

Easley, W. C.↗
NASA NTRS1985

Application of a fractional-step method to incompressible Navier-Stokes equations

A numerical method for computing three dimensional, time dependent incompressible flows is presented. The method is based on a fractional step, or time-splitting, scheme in conjunction with the approximate-factorization technique. The use of velocity boundary conditions for the intermediate velocity field leads to inconsistent numerical solutions. Appropriate boundary conditions for the intermediate velocity field are derived and tested. Numerical solutions for flow inside a driven cavity and over a backward-facing step are presented and compared with experimental data and other numerical results.

Kim, J.↗
NASA NTRS1998

Numerical Procedures for Inlet/Diffuser/Nozzle Flows

Two primitive variable, pressure based, flux-split, RNS/NS solution procedures for viscous flows are presented. Both methods are uniformly valid across the full Mach number range, Le., from the incompressible limit to high supersonic speeds. The first method is an 'optimized' version of a previously developed global pressure relaxation RNS procedure. Considerable reduction in the number of relatively expensive matrix inversion, and thereby in the computational time, has been achieved with this procedure. CPU times are reduced by a factor of 15 for predominantly elliptic flows (incompressible and low subsonic). The second method is a time-marching, 'linearized' convection RNS/NS procedure. The key to the efficiency of this procedure is the reduction to a single LU inversion at the inflow cross-plane. The remainder of the algorithm simply requires back-substitution with this LU and the corresponding residual vector at any cross-plane location. This method is not time-consistent, but has a convective-type CFL stability limitation. Both formulations are robust and provide accurate solutions for a variety of internal viscous flows to be provided herein.

Rubin, Stanley G.↗
NASA NTRS1997

Heart Fibrillation and Parallel Supercomputers

The Luo and Rudy 3 cardiac cell mathematical model is implemented on the parallel supercomputer CRAY - T3D. The splitting algorithm combined with variable time step and an explicit method of integration provide reasonable solution times and almost perfect scaling for rectilinear wave propagation. The computer simulation makes it possible to observe new phenomena: the break-up of spiral waves caused by intracellular calcium and dynamics and the non-uniformity of the calcium distribution in space during the onset of the spiral wave.

Kogan, B. Y.↗
DOE OSTI2022

Axially-integrated epitaxially-grown tandem wire arrays

A photoelectrode, methods of making and using, including systems for water-splitting are provided. The photoelectrode can be a semiconducting material having a photocatalyst such as nickel or nickel-molybdenum coated on the material. The photoelectrode includes an elongated axially integrated wire having at least two different wire compositions.

Lewis, Nathan S.↗
NASA NTRSDate not supplied

Nanopore Sequencing-Based Microbial Air Profiling Method for Crewed Spacecraft

Microbial monitoring of the International Space Station (ISS) atmosphere is vital to maintaining the health of the spacecraft and crew. Key to NASA’s microbial risk assessment is the identity of contaminating microorganisms in the environment. Historically, this has been achieved through impaction-based air sampling followed by culture. Identification of the microorganisms present requires sample return to Earth and lab-based analyses. While this culture-based approach has served to provide alerts to anomalies and overall confidence in the controls in place, it is not suitable for exploration missions with no sample return. Recently, significant advancements in molecular-based microbial monitoring via nanopore sequencing have been implemented onboard the ISS. Building on this work, multiple commercially available air samplers, compatible with downstream molecular analysis, were evaluated for use in the spaceflight environment. Through this assessment, the Coriolis Compact (Bertin Technologies), which uses cyclonic technology to collect bioaerosols onto the surface of a sterile cone, was selected for a larger-scale comparison to the current culture-based monitoring method. Using the Coriolis Compact, 1000 L of air was collected from the breakroom of an office building and a fitness center. The buffer used to dissociate the microbial cells from the surface of the cone was split between the NASA Microbiology Laboratory’s standard culture and Sanger sequencing-based method and the culture-independent nanopore sequencing method. The bacteria identified through culture were present in the nanopore data, with Micrococcus, Staphylococcus, and Moraxella being the most common cultured isolates, which is expected based on the media and growth conditions. Not surprisingly, the nanopore data yielded much higher diversity and paralleled that of previous atmospheric microbiome studies of human-occupied built environments. As compared to the culture-based data where the breakroom and fitness center data sets cluster in proximity, the nanopore data depicts the contrast of these atmospheric microbiomes. Moreover, the nanopore data were sufficient to meet NASA’s risk assessment needs and noted the culturable isolates routinely observed. This nanopore-based atmospheric microbial profiling method will enable near real-time environmental monitoring of crewed spacecraft as future missions extend beyond low-Earth orbit.

Brandon Dunbar↗
DOE OSTI2022

Developing Fuel Cell Electric Powertrain Architectures for Commercial Vehicles

Here, this article addresses the architecture development for a commercial vehicle fuel cell electric powertrain by establishing a clear multi-step formalized workflow that employs a unique technoeconomic solution for architecture selection. The power capability of the fuel cell, the energy capacity and chemistry of the electrical energy storage (battery), the DC-DC converter (including the input current rating and isolation resistance requirements), the traction drive solution, the on-board hydrogen storage solution, and the real-time power-split management of the fuel cell and the battery are all considered and developed in this effort. The methods were used to select architecture for Class 8 urban, regional, and line haul applications. When compared to traditional load-following power-split controllers, an energy management power-split controller can increase system energy efficiency by up to 19.5%. The energy-efficient power-split controller may increase the required battery capacity for an equivalent life by up to 2.6 times. The impact on the total cost of ownership (TCO) for a variety of financial cases demonstrates that high C-rate capable batteries have the potential to provide better TCO solutions over a six-year vehicle life than low C-rate capable batteries. To achieve TCO parity with the 600 A non-isolated DC-DC converter case, the specific choice of the fuel cell DC-DC converter to achieve a target power output based on current levels (from 500 A to 2400 A) shows that efficiency decreases and cost increases due to the higher current, requiring fuel cell prices to decrease by $50–$100/kW, $60–$110/kW, and $100–$220/kW for urban, regional, and line haul applications, respectively. Key recommendations for powertrain system architectures are provided, with specifics based on vehicle dynamics, mission and application characteristics, end customer use-case profile, critical powertrain component costs, and architecture selection cost function. This study rigorously demonstrates the interplay of the above parameters, with a focus on TCO, and provides application decision-makers with a mechanism and well-defined set of impact factors to consider as part of their architecture selection process.

25 ENERGY STORAGE↗
DOE OSTI2025

First principles study of the Fermi surface topology of CeCu 2 ⁢Si 2

Since the discovery of heavy-fermion superconductivity in CeCu 2 ⁢Si 2 , the material has attracted great interest, particularly with regard to the nature of the superconducting pairing and its mechanism. Consequently, it is essential to better understand the electronic Fermi surface topology and its role in strong antiferromagnetic fluctuations. The standard density functional theory method is insufficient to model the interplay of strong on-site Coulomb repulsion in localized 4⁢𝑓 electrons and their hybridization with itinerant ligand-orbital electrons. We have performed electronic ground-state calculations on CeCu 2 ⁢Si 2 using the Gutzwiller wave function approximation. The Gutzwiller approximation captures the quasiparticle band renormalization from the strong on-site Coulomb repulsion. We have performed an analysis of this effect on the electronic structure and the Fermi surface topology by varying the interaction strength and taking into account the crystal-field splitting. Using the de Haas-van Alphen effect, the extremal Fermi surface cross-sectional areas were calculated to quantify the effects of quasiparticle mass renormalization on the Fermi surface. Our results confirm the presence of two Fermi surface sheets corresponding to the heavy (488⁢𝑚 𝑒 ) and light (4.35⁢𝑚 𝑒 ) quasiparticles when the crystal-field splitting is accounted for on equal footing with the electronic correlations. This method gives the best agreement with experimental measurements as well as the renormalized band method.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Polarization-stabilized 1.15- and 3.39-micron He-Ne lasers

Two methods for polarization stabilization of an internal-mirror 3.39-micron He-Ne laser are reported. The first relies on a concurrently lasing 1.15-micron transition by fixing the relative amplitude of two orthogonally polarized longitudinal modes that are split by a Rochon prism and detected with separate Si photodiodes. In the second method, two spatially separated orthogonally polarized adjacent 3.39-micron modes are optically balanced, differentially chopped, and recombined on a single InSb photodiode for phase-sensitive detection. The dual-wavelength scheme has been tested by beating against a methane-stabilized 3.39-micron He-Ne laser, which yields maximum excursions of less than 0.5 MHz over several hours and comparable reproducibility. The polarization-stabilized He-Ne laser has been used as a reference for a tunable color-center laser molecular-beam optothermal spectrometer and provides a precision of better than 2 MHz.

Junttila, M.-L.↗
DOE OSTI2020

Data-driven selection of stiff chemistry ODE solver in operator-splitting schemes

Most computational fluid dynamics simulations of practical combustion applications employ operator-splitting schemes, where chemistry and transport are separated and integrated with distinct numerical methods. The changes in composition due to chemistry are evaluated by solving ordinary differential equations (ODE) in each cell of the computational domain, which typically dominates the computational cost when detailed chemistry is considered. In this work, a data-driven approach for the selection of chemistry ODE solvers in operator-splitting schemes is presented. Neural networks are used to predict the ODE solvers CPU times and errors for a given thermochemical state. This allows the selection of an optimal ODE solver on a cell-by-cell, timestep-by-timestep basis. The models are trained using a wide set of thermochemical states generated through partially-stirred reactors and flames simulations. The methodology is validated by quantifying the prediction errors, the classification accuracy, and the computational speedup. The model predicts the optimal ODE solver for 70 to 95% of the validation cases and decreases the computional cost by a factor of 3 or more. The generalizability of the methodology to different chemical mechanisms and different fuels is assessed and it is shown that the model’s performance is only slightly degraded and its applicability is significantly enhanced if the inputs to the neural networks are restricted to a small set of thermochemical state variables present in most chemical mechanisms. In conclusion, the models are used in an homogeneous reactor case and a multi-dimensional CFD simulation of a diesel spray at high pressure where a speedup of more than 3 is achieved.

42 ENGINEERING↗
DOE OSTI2023

Split aminoacyl-tRNA synthetases for proximity-induced stop codon suppression

Synthetic biology tools for regulating gene expression have many useful biotechnology and therapeutic applications. Most tools developed for this purpose control gene expression at the level of transcription, and relatively few methods are available for regulating gene expression at the translational level. Here, we design and engineer split orthogonal aminoacyl-tRNA synthetases (o-aaRS) as unique tools to control gene translation in bacteria and mammalian cells. Using chemically induced dimerization domains, we developed split o-aaRSs that mediate gene expression by conditionally suppressing stop codons in the presence of the small molecules rapamycin and abscisic acid. Furthermore, by activating o-aaRSs, these molecular switches induce stop codon suppression, and in their absence stop codon suppression is turned off. We demonstrate, in Escherichia coli and in human cells, that split o-aaRSs function as genetically encoded AND gates where stop codon suppression is controlled by two distinct molecular inputs. In addition, we show that split o-aaRSs can be used as versatile biosensors to detect therapeutically relevant protein–protein interactions, including those involved in cancer, and those that mediate severe acute respiratory syndrome-coronavirus-2 infection.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1990

Development of a time-dependent incompressible Navier-Stokes solver based on a fractional-step method

The development, validation and application of a fractional step solution method of the time-dependent incompressible Navier-Stokes equations in generalized coordinate systems are discussed. A solution method that combines a finite-volume discretization with a novel choice of the dependent variables and a fractional step splitting to obtain accurate solutions in arbitrary geometries was previously developed for fixed-grids. In the present research effort, this solution method is extended to include more general situations, including cases with moving grids. The numerical techniques are enhanced to gain efficiency and generality.

Rosenfeld, Moshe↗
NASA NTRS1972

A new method for in situ electron temperature determinations from plasma wave phenomena

A discrepancy has been reported between the values of the electron temperature t sub e deduced from satellite electrostatic probe measurements and ground based radar backscatter measurements. This discrepancy (radar backscatter temperature less than the probe temperature) is not present when the probe experiment is flown on a rocket to lower altitudes but reappears when the rocket probe attains higher altitudes. There is a need for an independent radio wave method for making in-situ t sub e measurements in order to help resolve this problem. A new method of determining t sub e from the satellite resonant phenomena is presented. It is based on the splitting (observed at high latitudes) of the diffuse resonance which occurs at the frequency f sub d1 between f sub h and 2 f sub h. The advantage of this method over the other methods involving ionospheric resonances is the simplicity of the required calculations. There is, however, the limitation of plasma conditions where the f sub d1 resonance can be observed and the limitation to mid-to-high latitudes where the splitting is observed.

Oya, H.↗
DOE OSTI2023

Cutting-edge methods for amplifying the oxygen evolution reaction during seawater electrolysis: a brief synopsis

Electrochemical water splitting has been considered a clean and continual way for hydrogen (H 2 ) production. Direct seawater electrolysis is a potentially attractive technology due to the ample access to seawater and scarce freshwater resources in some regions. However, the presence of impurities (e.g., Cl - , Mg 2+ ) and the resulting corrosion and side reactions, such as the chloride oxidation reaction (ClOR), makes seawater electrocatalysis more challenging than that of fresh or alkaline water due to competition with the oxygen evolution reaction (OER) at the anode. Consequently, much effort has been devoted to developing approaches to enhance OER performance and suppress the ClOR. In this minireview, we summarize three general strategies for enhancing OER activity and selectivity in seawater electrolysis based on three different concepts: (1) the sole development of robust and high-performance OER catalysts in pure seawater electrolytes, (2) the introduction of additives to seawater electrolytes (e.g., alkalis and/or salts without chloride) to enhance the potential equilibrium gap between the ClOR and OER in combination with regular highly active OER catalysts, and (3) a combination of approaches (1) and (2). Finally, the current challenges and potential opportunities for green H 2 production from seawater electrolysis are briefly presented.

08 HYDROGEN↗
NASA NTRS1994

An approximate Riemann solver for thermal and chemical nonequilibrium flows

Among the many methods available for the determination of inviscid fluxes across a surface of discontinuity, the flux-difference-splitting technique that employs Roe-averaged variables has been used extensively by the CFD community because of its simplicity and its ability to capture shocks exactly. This method, originally developed for perfect gas flows, has since been extended to equilibrium as well as nonequilibrium flows. Determination of the Roe-averaged variables for the case of a perfect gas flow is a simple task; however, for thermal and chemical nonequilibrium flows, some of the variables are not uniquely defined. Methods available in the literature to determine these variables seem to lack sound bases. The present paper describes a simple, yet accurate, method to determine all the variables for nonequilibrium flows in the Roe-average state. The basis for this method is the requirement that the Roe-averaged variables form a consistent set of thermodynamic variables. The present method satisfies the requirement that the square of the speed of sound be positive.

Prabhu, Ramadas K.↗
NASA NTRS1977

Computations of supersonic viscous flow over a finite-width plate

Finite difference methods were applied to solve the parabolic Navier-Stokes equations for the flow over a finite width plate at 0 deg and 10 deg angles of attack. The methods were developed on the basis of the operator factorization concept resulting in the split of a three dimensional equation into successive two dimensional equations. Backward and centered implicit factorization schemes, were used and their results were compared. Available numerical solutions and experimental data obtained at low Reynolds number conditions were also used for comparison. The backward implicit method provides a more successful solution, which ranges from the merged layer to the strong interaction regimes. Detailed structures were revealed of the shear layer around and behind the side edge.

Li, C. P.↗