Search NASA⌕ Search

SEARCH · Search NASA

Results for “splitting methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Saturated critical heat flux in a multi-microchannel heat sink fed by a split flow system

An extensive experimental campaign has been carried out for the measurement of saturated critical heat flux in a multi-microchannel copper heat sink. The heat sink was formed by 29 parallel channels that were 199 {mu}m wide and 756 {mu}m deep. In order to increase the critical heat flux and reduce the two-phase pressure drop, a split flow system was implemented with one central inlet at the middle of the channels and two outlets at either end. The base critical heat flux was measured using three HFC Refrigerants (R134a, R236fa and R245fa) for mass fluxes ranging from 250 to 1500 kg/m{sup 2} s, inlet subcoolings from -25 to -5 K and saturation temperatures from 20 to 50 C. The parametric effects of mass velocity, saturation temperature and inlet subcooling were investigated. The analysis showed that significantly higher CHF was obtainable with the split flow system (one inlet-two outlets) compared to the single inlet-single outlet system, providing also a much lower pressure drop. Notably several existing predictive methods matched the experimental data quite well and quantitatively predicted the benefit of higher CHF of the split flow. (author)

42 ENGINEERING↗

Photocatalytic water splitting—The untamed dream: A review of recent advances

Here, photocatalytic water splitting using sunlight is a promising technology capable of providing high energy yield without pollutant byproducts. Herein, we review various aspects of this technology including chemical reactions, physiochemical conditions and photocatalyst types such as metal oxides, sulfides, nitrides, nanocomposites, and doped materials followed by recent advances in computational modeling of photoactive materials. As the best-known catalyst for photocatalytic hydrogen and oxygen evolution, TiO 2 is discussed in a separate section, along with its challenges such as the wide band gap, large overpotential for hydrogen evolution, and rapid recombination of produced electron-hole pairs. Various approaches are addressed to overcome these shortcomings, such as doping with different elements, heterojunction catalysts, noble metal deposition, and surface modification. Development of a photocatalytic corrosion resistant, visible light absorbing, defect-tuned material with small particle size is the key to complete the sunlight to hydrogen cycle efficiently. Computational studies have opened new avenues to understand and predict the electronic density of states and band structure of advanced materials and could pave the way for the rational design of efficient photocatalysts for water splitting. Future directions are focused on developing innovative junction architectures, novel synthesis methods and optimizing the existing active materials to enhance charge transfer, visible light absorption, reducing the gas evolution overpotential and maintaining chemical and physical stability

36 MATERIALS SCIENCE↗

Generalized-active-space pair-density functional theory: an efficient method to study large, strongly correlated, conjugated systems

Predicting ground- and excited-state properties of open-shell organic molecules by electronic structure theory can be challenging because an accurate treatment has to correctly describe both static and dynamic electron correlation. Strongly correlated systems, i.e., systems with near-degeneracy correlation effects, are particularly troublesome. Multiconfigurational wave function methods based on an active space are adequate in principle, but it is impractical to capture most of the dynamic correlation in these methods for systems characterized by many active electrons. Here, we recently developed a new method called multiconfiguration pair-density functional theory (MC-PDFT), that combines the advantages of wave function theory and density functional theory to provide a more practical treatment of strongly correlated systems. Here we present calculations of the singlet–triplet gaps in oligoacenes ranging from naphthalene to dodecacene. Calculations were performed for unprecedently large orbitally optimized active spaces of 50 electrons in 50 orbitals, and we test a range of active spaces and active space partitions, including four kinds of frontier orbital partitions. We show that MC-PDFT can predict the singlet–triplet splittings for oligoacenes consistent with the best available and much more expensive methods, and indeed MC-PDFT may constitute the benchmark against which those other models should be compared, given the absence of experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impacts of urban transportation mode split on CO{sub 2} emissions in Jinan, China.

As the world's largest developing country, China currently is undergoing rapid urbanization and motorization, which will result in far-reaching impacts on energy and the environment. According to estimates, energy use and carbon emissions in the transportation sector will comprise roughly 30% of total emissions by 2030. Since the late 1990s, transportation-related issues such as energy, consumption, and carbon emissions have become a policy focus in China. To date, most research and policies have centered on vehicle technologies that promote vehicle efficiency and reduced emissions. Limited research exists on the control of greenhouse gases through mode shifts in urban transportation - in particular, through the promotion of public transit. The purpose of this study is to establish a methodology to analyze carbon emissions from the urban transportation sector at the Chinese city level. By using Jinan, the capital of China's Shandong Province, as an example, we have developed an analytical model to simulate energy consumption and carbon emissions based on the number of trips, the transportation mode split, and the trip distance. This model has enabled us to assess the impacts of the transportation mode split on energy consumption and carbon emissions. Furthermore, this paper reviews a set of methods for data collection, estimation, and processing for situations where statistical data are scarce in China. This paper also describes the simulation of three transportation system development scenarios. The results of this study illustrate that if no policy intervention is implemented for the transportation mode split (the business-as-usual (BAU) case), then emissions from Chinese urban transportation systems will quadruple by 2030. However, a dense, mixed land-use pattern, as well as transportation policies that encourage public transportation, would result in the elimination of 1.93 million tons of carbon emissions - approximately 50% of the BAU scenario emissions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Analysis of Monte Carlo accelerated iterative methods for sparse linear systems: Analysis of Monte Carlo accelerated iterative methods for sparse linear systems

Here, we consider hybrid deterministic-stochastic iterative algorithms for the solution of large, sparse linear systems. Starting from a convergent splitting of the coefficient matrix, we analyze various types of Monte Carlo acceleration schemes applied to the original preconditioned Richardson (stationary) iteration. We expect that these methods will have considerable potential for resiliency to faults when implemented on massively parallel machines. We also establish sufficient conditions for the convergence of the hybrid schemes, and we investigate different types of preconditioners including sparse approximate inverses. Numerical experiments on linear systems arising from the discretization of partial differential equations are presented.

97 MATHEMATICS AND COMPUTING↗

Preparation and photocatalytic activity for water splitting of Pt-Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays

Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays were prepared by hydrothermal method from Ta{sub 2}O{sub 5} nanotube arrays, obtained by anodization of Ta foils, in Na{sub 2}CO{sub 3} solution at 150 Degree-Sign C. The as-synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), UV-vis diffuse reflectance spectra (UV-DRS) and X-ray photoelectron spectroscopy (XPS). Analysis results show that pyrochlore structure Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays have been successfully fabricated. The diameters and lengths of Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays are 50 nm and 4 {mu}m, respectively. The photocatalytic hydrogen production activities of the as-synthesized Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays are highly dependent on the hydrothermal reaction time and Na{sub 2}CO{sub 3} concentration, optimized reaction parameters are obtained. To further improve the photocatalytic activity for hydrogen evolution, Pt loaded Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays are prepared by photochemical reduction method. The Pt loaded samples exhibit much higher activity for hydrogen evolution than pure Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays. Moreover, the photocatalytic hydrogen properties are rather stable. - Graphical abstract: Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays were synthesized by hydrothermal method using Ta{sub 2}O{sub 5} nanotube arrays as a precursor. The loaded Pt enhances the photocatalytic activity for water splitting of Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays. Highlights: Black-Right-Pointing-Pointer Novel Na{sub 2}Ta{sub 2}O{sub 6} nanotube array films with pyrochlore structure were synthesized. Black-Right-Pointing-Pointer Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays are active for H{sub 2} evolution from aqueous CH{sub 3}OH solution. Black-Right-Pointing-Pointer The effect of hydrothermal conditions on photocatalytic activity was investigated. Black-Right-Pointing-Pointer Pt loading can improve the photocatalytic activities of Na{sub 2}Ta{sub 2}O{sub 6} nanotube arrays. Black-Right-Pointing-Pointer Photocatalytic mechanism is proposed based on the experimental results.

36 MATERIALS SCIENCE↗

CO{sub 2} laser-induced micro-plume treatment of silicon: technique and application

A method for treating the surface of crystalline silicon (α-Si) covered with a fused silica (SiO{sub 2}) plate by a laser-induced plume arising from the absorption of CO{sub 2} laser radiation in glass is presented. The mechanism of micro-plume formation and the effect of this micro-plume on α-Si sample are considered. The α-Si processing regimes were determined that relate the depth of the formed relief to the radiation power density, the temperature of the micro-plume formed during SiO{sub 2} irradiation was measured and reached 3000 K. The diffraction phase gratings were designed, manufactured on silicon, and tested, they successfully split 10.6 μm laser beam at 0 and ± 1 diffraction orders. The method belongs to the group of direct writing methods and is easily adapted to different types of diffraction elements on the surface of Si and other materials transparent to 10 μm irradiation.

36 MATERIALS SCIENCE↗

How to increase the efficiency of the electrical discharge method for destruction of nonconductive solid materials

The paper deals with the relevance of using electrical discharge technology for construction works in the city. The technical capabilities of the installation for the multi-borehole electro-discharge splitting off and destruction of rocks and concrete are described. The ways to increase the efficiency of the electrical discharge method for the destruction of solids are proposed. In order to augment the discharge circuit energy, the energy storage is separated into two individual capacitor batteries. The throttle with the inductance of 28.6 μH is installed in one of the batteries, which increases the duration of the channel energy release to 400 μs and the efficiency of electrical discharge splitting off of concrete.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Proton form factor effects in hydrogenic atoms

The proton structure corrections to the hyperfine splittings in electronic and muonic hydrogen are evaluated using the Breit potential with electromagnetic form factors. In contrast to other methods, the Breit equation with q{sup 2} dependent form factors is just an extension of the standard Breit equation which gives the hyperfine splitting Hamiltonian. Precise QED corrections are comparable to the structure corrections which therefore need to be evaluated ab initio.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Exclusive Alternating Chemotherapy and Radiotherapy in Nonmetastatic Inflammatory Breast Cancer: 20 Years of Follow-Up

Background: Locoregional treatment of inflammatory breast cancer (IBC) is crucial because local relapses may be highly symptomatic and are commonly associated with distant metastasis. With a median follow-up of 20 years, we report here the long-term results of a monocentric clinical trial combining primary chemotherapy (CT) with a schedule of anthracycline-based CT and an alternating split-course of radiotherapy (RT Asterisk-Operator CT) without mastectomy. Methods and Materials: From September 1983 to December 1989, 124 women with nonmetastatic IBC (T4d M0) were treated with three cycles of primary AVCMF chemotherapy (anthracycline, vincristine, cyclophosphamide, methotrexate, and 5-fluorouracil) and then an alternating RT Asterisk-Operator CT schedule followed by three cycles of FAC. Hormonal therapy was systematically administered: ovarian irradiation (12 Gy in four fractions) or tamoxifen 20 mg daily. Results: Local control was achieved in 82% of patients. The 10- and 20-year local relapse rates were 26% and 33%, respectively, but only 10% of locally controlled cases were not associated with concurrent distant metastasis. The 10- and 20-year overall survival rates were 39% and 19%, respectively. Severe fibrosis occurred in 54% of patients, grade 3 brachial plexus neuropathy in 4%, grade 2 pneumonitis in 9%. Grade 1, 2 and 3 cardiac toxicity was observed in 3.8%, 3.8% and 1.2% of cases respectively. Conclusions: This combined regimen allowed good long-term local control without surgery. Survival rates were similar to those obtained with conventional regimens (primary chemotherapy, total mastectomy, and adjuvant radiotherapy). Since IBC continues to be an entity with a dismal prognosis, this approach, safely combining preoperative or postoperative radiation therapy and systemic treatments, should be reassessed when suitable targeted agents are available.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Visualizing Charge Transport and Nanoscale Electrochemistry by Hyperspectral Kelvin Probe Force Microscopy

Charge-transport and electrochemical processes are heavily influenced by the local microstructure. Kelvin probe force microscopy (KPFM) is a widely used technique to map electrochemical potentials at the nanometer scale; however, it offers little information on local charge dynamics. In this study, we implement a hyperspectral KPFM approach for spatially mapping bias-dependent charge dynamics in timescales ranging from the sub-millisecond to the second regime. As a proof of principle, we investigate the role mobile surface charges play in a three-unit-cell LaAlO 3 /SrTiO 3 oxide heterostructure. We explore machine learning approaches to assist with visualization, pattern recognition, and interpretation of the information-rich data sets. Linear unmixing methods reveal hidden bias-dependent interfacial processes, most likely water splitting, which are essentially unnoticed by functional fitting of the dynamic response alone. Hyperspectral KPFM will be beneficial for investigating nanoscale charge transport and local reactivity in systems involving a possible combination of electronic, ionic, and electrochemical phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluorescence from a quantum dot and metallic nanosphere hybrid system

We present energy absorption and interference in a quantum dot-metallic nanosphere system embedded on a dielectric substrate. A control field is applied to induce dipole moments in the nanosphere and the quantum dot, and a probe field is applied to monitor absorption. Dipole moments in the quantum dot or the metal nanosphere are induced, both by the external fields and by each other's dipole fields. Thus, in addition to direct polarization, the metal nanosphere and the quantum dot will sense one another via the dipole-dipole interaction. The density matrix method was used to show that the absorption spectrum can be split from one peak to two peaks by the control field, and this can also be done by placing the metal sphere close to the quantum dot. When the two are extremely close together, a self-interaction in the quantum dot produces an asymmetry in the absorption peaks. In addition, the fluorescence efficiency can be quenched by the addition of a metal nanosphere. This hybrid system could be used to create ultra-fast switching and sensing nanodevices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Au plasmonics in a WS{sub 2}-Au-CuInS{sub 2} photocatalyst for significantly enhanced hydrogen generation

Promoting the activities of photocatalysts is still the critical challenge in H{sub 2} generation area. Here, a Au plasmon enhanced photocatalyst of WS{sub 2}-Au-CuInS{sub 2} is developed by inserting Au nanoparticles between WS{sub 2} nanotubes and CuInS{sub 2} (CIS) nanoparticles. Due to the localized surface plasmonic resonance properties from Au nanoparticles, WS{sub 2}-Au-CIS shows the best performance as compared to Au-CIS, CIS, WS{sub 2}-CIS, CIS-Au, WS{sub 2}-Au, and WS{sub 2}-CIS-Au. The surface plasmonic resonance effects dramatically intensify the absorption of visible light and help to inject hot electrons into the semiconductors. Our findings open up an efficient method to optimize the type-II structures for photocatalytic water splitting.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonance structure of strength functions for first-forbidden {beta}{sup +}/EC transitions

Experimental data obtained by measuring the fine structure of the strength function S{sub {beta}}(E) in spherical and deformed nuclei were analyzed. The use of modern nuclear-spectroscopy methods made it possible to reveal the nuclear-deformation-induced splitting of peaks in S{sub {beta}} (E) for transitions of the Gamow-Teller type. For first-forbidden transitions, the resonance nature of S{sub {beta}} (E) was proven experimentally both for spherical and for deformed nuclei. It is shown that, at some values of the excitation energy, the intensity of first-forbidden transitions in nuclei can be commensurate with the intensity of Gamow-Teller transitions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Continued performance improvement and integration of MOOSE's thermal-hydraulics capabilities (M3 Milestone Report)

This work introduces performance, robustness and workflow improvements to Multiphysics Object-Oriented Simulation Environment (MOOSE)-based thermal-hydraulics solvers. It presents work related to the acceleration of segregated fluid dynamics algorithms, which show approximately a factor of 10 speedup compared to the preceding implementation. Additionally, we discuss approaches to use advanced, Schurr complement-based, field split preconditioners for monolithic solution algorithms relying on the finite volume method. The presence of the Rhie-Chow interpolation makes the utilization of this preconditioner challenging, but the results indicate that for a moderately large problem a factor of 3.4 speedup can be achieved in conjunction with a factor of 3.5 reduction in memory usage. Furthermore, we introduce several pseudo-time stepping approaches to MOOSE for the robust convergence to steady-state solutions when steady-state solves don't converge due to the initial guesses being too far from the solution in Newton's method. Every MOOSE-based application has access this algorithm and can benefit from its use. Moreover, several new avenues have been presented for importing meshes from commercial software which make meshing easier. Lastly, the Component system within the Thermal-Hydraulics Module (THM) of MOOSE is abstracted by separating geometry- and physics-related properties.

97 MATHEMATICS AND COMPUTING↗

Synchrotron-based techniques for characterizing STCH water-splitting materials

Understanding the role of oxygen vacancy–induced atomic and electronic structural changes to complex metal oxides during water-splitting processes is paramount to advancing the field of solar thermochemical hydrogen production (STCH). The formulation and confirmation of a mechanism for these types of chemical reactions necessitate a multifaceted experimental approach, featuring advanced structural characterization methods. Synchrotron X-ray techniques are essential to the rapidly advancing field of STCH in part due to properties such as high brilliance, high coherence, and variable energy that provide sensitivity, resolution, and rapid data acquisition times required for the characterization of complex metal oxides during water-splitting cycles. X-ray diffraction (XRD) is commonly used for determining the structures and phase purity of new materials synthesized by solid-state techniques and monitoring the structural integrity of oxides during water-splitting processes (e.g., oxygen vacancy–induced lattice expansion). X-ray absorption spectroscopy (XAS) is an element-specific technique and is sensitive to local atomic and electronic changes encountered around metal coordination centers during redox. While in operando measurements are desirable, the experimental conditions required for such measurements (high temperatures, controlled oxygen partial pressures, and H 2 O) practically necessitate in situ measurements that do not meet all operating conditions or ex situ measurements. Here, we highlight the application of synchrotron X-ray scattering and spectroscopic techniques using both in situ and ex situ measurements, emphasizing the advantages and limitations of each method as they relate to water-splitting processes. The best practices are discussed for preparing quenched states of reduction and performing synchrotron measurements, which focus on XRD and XAS at soft (e.g., oxygen K-edge, transition metal L-edges, and lanthanide M-edges) and hard (e.g., transition metal K-edges and lanthanide L-edges) X-ray energies. The X-ray absorption spectra of these complex oxides are a convolution of multiple contributions with accurate interpretation being contingent on computational methods. The state-of-the-art methods are discussed that enable peak positions and intensities to be related to material electronic and structural properties. Through careful experimental design, these studies can elucidate complex structure–property relationships as they pertain to nonstoichiometric water splitting. A survey of modern approaches for the evaluation of water-splitting materials at synchrotron sources under various experimental conditions is provided, and available software for data analysis is discussed.

08 HYDROGEN↗

A finite-volume scheme for modeling compressible magnetohydrodynamic flows at low Mach numbers in stellar interiors

Fully compressible magnetohydrodynamic (MHD) simulations are a fundamental tool for investigating the role of dynamo amplification in the generation of magnetic fields in deep convective layers of stars. The flows that arise in such environments are characterized by low (sonic) Mach numbers ($\mathscr{M}$ son ≲ 10 –2 ). In these regimes, conventional MHD codes typically show excessive dissipation and tend to be inefficient as the Courant–Friedrichs–Lewy (CFL) constraint on the time step becomes too strict. In this work we present a new method for efficiently simulating MHD flows at low Mach numbers in a space-dependent gravitational potential while still retaining all effects of compressibility. The proposed scheme is implemented in the finite-volume SEVEN-LEAGUE HYDRO (SLH) code, and it makes use of a low-Mach version of the five-wave Harten–Lax–van Leer discontinuities (HLLD) solver to reduce numerical dissipation, an implicit–explicit time discretization technique based on Strang splitting to overcome the overly strict CFL constraint, and a well-balancing method that dramatically reduces the magnitude of spatial discretization errors in strongly stratified setups. The solenoidal constraint on the magnetic field is enforced by using a constrained transport method on a staggered grid. We carry out five verification tests, including the simulation of a small-scale dynamo in a star-like environment at $\mathscr{M}$ son ~ 10 –3 . We demonstrate that the proposed scheme can be used to accurately simulate compressible MHD flows in regimes of low Mach numbers and strongly stratified setups even with moderately coarse grids.

79 ASTRONOMY AND ASTROPHYSICS↗

The adaptive mesh method based on HOC difference scheme for convection diffusion equations with boundary layers

In this paper, an adaptive mesh method is proposed to generate orthogonal nonuniform mesh for 2D rectangular computational domain. The algorithm adopts the dimension split idea which redistribute the mesh on each direction sequently. This approach efficiently decreases the difficultly of algorithm and enables the adapted mesh to be orthogonal. The adaptive mesh method can redistribute the mesh based on the solution without specifying the location of the boundary layer or the grid distribution function to generate the nonuniform mesh in advance. To verify the effectiveness and robustness of the algorithm, the presented method combined with the HOC difference scheme on nonuniform grid is used to solve the 1D and 2D convection diffusion problems with boundary layers. Besides, the multigrid method is used to accelerate the iterative convergence speed. The numerical solutions of adaptive mesh is more flexible than uniform or nonuniform grids methods if the location of the boundary layers is unknown in advance.

97 MATHEMATICS AND COMPUTING↗