Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Vertically-Aligned Carbon-Nanotubes Embedded in Ceramic Matrices for Hot Electrode Applications

The proposed is aimed to develop carbon nanotube-ceramic (CNT-C) composite structures, in which vertically aligned CNTs (VA-CNTs) are embedded in ceramic matrices for hot electrode applications in Magnetohydrodynamics (MHD) power systems, including four objectives: 1) Super growth of VA-CNT carpets; 2) Fabrication of CNT-boron nitride (CNT-BN) composite structures by chemical vapor infiltration; 3) Stability and resistance studies of the CNT-BN Composite structures; and 4) Thermionic emissions of the CNT-BN composite structures. The researchers will deploy water vapor-assisted chemical vapor deposition (CVD) method in the super growth of VA-CNT carpets on copper (Cu) with a maximum length up to 1 cm. Fabrication of the CNT-BN composite structures will be achieved by infiltrating gaseous boron precursors into the VA-CNTs followed by a universal heating, converting the precursors to solid BN crystals. Thermal stability and oxidation resistivity of the CNT-BN composite structures will be investigated using Thermogravimetric Analysis (TGA) and Differential thermal analysis (DTA) under an oxidation environment from room temperature to 3000 K. An oxy-acetylene flame will be employed to simulate the extreme environment in MHD channels for investigating the thermal and electrical conductivity, and corrosion and erosion resistance of the CNT-BN composite structures under the extreme conditions. Thermionic emission performance of the CNT-BN composite structures will be investigated to study the transport properties of the composite structures. If the CNT-BN composite does not perform as anticipated, selected ultra-high-temperature ceramics, such as titanium boride (TiB2), will be investigated as a backup candidate wrapping CNTs. Upon the successful completion of the propose research, CNT-C composite structures, such as CNT-BN and CNT-TiB2, will be developed for “hot” electrode applications. Fundamental understanding on the thermal and electrical transport properties of CNTs at high temperatures up to 3000 K will be established. Wrapping CNTs in ceramic matrices will isolate CNTs from the extreme environments in the MHD channels. The embedded CNTs will serve as conductive channels for heat and electricity transport. It is anticipated that the CNT-C composite structures would withstand the extreme environments in MHD channels and provide sufficient electrical and thermal conductivities for direct power extraction from seeded oxy-fuel combustion fluids. Successful development of the CNT-C composite structures will significant improve the reliability and promote the commercial applications of MHD generators, which are capable of large scale mass energy conversion at an unprecedented efficiency of 60% with reduced overall production of hazardous fossil fuel wastes.

01 COAL, LIGNITE, AND PEAT↗

Ambient Optomechanical Alignment and Pupil Metrology for the Flight Instruments Aboard the James Webb Space Telescope

The James Webb Space Telescope science instruments are in the final stages of being integrated into the Integrated Science Instrument Module (ISIM) element. Each instrument is tied into a common coordinate system through mechanical references that are used for optical alignment and metrology within ISIM after element-level assembly. In addition, a set of ground support equipment (GSE) consisting of large, precisely calibrated, ambient, and cryogenic structures are used as alignment references and gauges during various phases of integration and test (I&T). This GSE, the flight instruments, and ISIM structure feature different types of complimentary metrology targeting. These GSE targets are used to establish and track six degrees of freedom instrument alignment during I&T in the vehicle coordinate system (VCS). This paper describes the optomechanical metrology conducted during science instrument integration and alignment in the Spacecraft Systems Development and Integration Facility (SSDIF) cleanroom at NASA Goddard Space Flight Center (GSFC). The measurement of each instrument's ambient entrance pupil location in the telescope coordinate system is discussed. The construction of the database of target locations and the development of metrology uncertainties is also discussed.

Optomechanical Alignment↗

A self-assembly pathway to aligned monodomain gels

Aggregates of charged amphiphilic molecules have been found to access a structure at elevated temperature that templates alignment of supramolecular fibrils over macroscopic scales. The thermal pathway leads to a lamellar plaque structure with fibrous texture that breaks on cooling into large arrays of aligned nanoscale fibres and forms a strongly birefringent liquid. By manually dragging this liquid crystal from a pipette onto salty media, it is possible to extend this alignment over centimetres in noodle-shaped viscoelastic strings. Using this approach, the solution of supramolecular filaments can be mixed with cells at physiological temperatures to form monodomain gels of aligned cells and filaments. The nature of the self-assembly process and its biocompatibility would allow formation of cellular wires in situ that have any length and customized peptide compositions for use in biological applications.

54 ENVIRONMENTAL SCIENCES↗

Confronting Large‐Eddy Simulations With Stereo Camera Data by Means of Reconstructed Hemispheric Cloud Size Distributions

High-resolution hemispheric camera images at a meteorological site in western Germany are used to analyze the multi-dimensional spatial characteristics of continental cumulus cloud fields, and to evaluate Large-Eddy Simulations on this aspect. Traditional non-hemispheric cloud-detecting instruments provide additional reference data. The main model-observation comparison focuses on cloud size distributions (CSDs), employing two methods: (a) directly using three-dimensional model fields, direct CSDs, and (b) using rendered hemispheric images of the model fields as produced by a camera simulator based on path-tracing. In the latter method, both the real and rendered images are used to three-dimensionally reconstruct the cloud fields, yielding hemispheric CSDs. Advantages of hemispheric comparisons over more classic approaches include (a) fair comparisons between model and data, and (b) full use of the enhanced resolutions and hemispheric spatial coverage of the camera imagery. Basic evaluation of the simulations demonstrates good agreement on thermodynamic structure and its diurnal cycle. Cloud heights and cloud cover are intercompared between the model, camera data and other instrumentation, providing insight into their structural differences. A consistent alignment is found between the hemispheric CSDs from both the model and the cameras. Power law fits reveal structurally lower exponents in hemispheric CSDs compared to non-hemispheric CSDs, which particularly caution against directly comparing hemispheric CSDs to non-hemispheric distributions. This result is robust for sample size and fitting method. These findings inform future use of hemispheric camera systems for studying cumulus cloud field morphology and model evaluation.

54 ENVIRONMENTAL SCIENCES↗

Symmetry in polarimetric remote sensing

Relationships among polarimetric backscattering coefficients are derived from the viewpoint of symmetry groups. For both reciprocal and non-reciprocal media, symmetry encountered in remote sensing due to reflection, rotation, azimuthal, and centrical symmetry groups is considered. The derived properties are general and valid to all scattering mechanisms, including volume and surface scatterings and their interactions, in a given symmetrical configuration. The scattering coefficients calculated from theoretical models for layer random media and rough surfaces are shown to obey the symmetry relations. Use of symmetry properties in remote sensing of structural and environmental responses of scattering media is also discussed. Orientations of spheroidal scatterers described by spherical, uniform, planophile, plagiothile, erectophile, and extremophile distributions are considered to derive their polarimetric backscattering characteristics. These distributions can be identified from the observed scattering coefficients by comparison with theoretical symmetry calculations. A new parameter is then defined to study scattering structures in geophysical media. Observations from polarimetric data acquired by the Jet Propulsion Laboratory airborne synthetic aperture radar over forests, sea ice, and sea surface are presented. Experimental evidences of the symmetry relationships are shown and their use in polarimetric remote sensing is illustrated. For forests, the coniferous forest in Mt. Shasta area (California) and mixed forest near Presque Isle (Maine) exhibit characteristics of the centrical symmetry at C-band. For sea ice in the Beaufort Sea, multi-year sea ice has a cross-polarized ratio e close to e(sub 0), calculated from symmetry, due to the randomness in the scattering structure. First-year sea ice has e much smaller than e(sub 0) due to the preferential alignment of the columnar structure of the ice. From polarimetric data of a sea surface in the Bering Sea, it is observed that e and e(sub 0) are increasing with incident angle and e is greater than e(sub 0) at L-band because of the directional feature of sea surface waves. Symmetry properties of geophysical media can also be used to calibrate polarimetric radars.

Nghiem, S. V.↗

Alignment between Filaments and Galaxy Spins from the MaNGA Integral-field Survey

Halos and galaxies acquire their angular momentum during the collapse of the surrounding large-scale structure. This process imprints alignments between galaxy spins and nearby filaments and sheets. Low-mass halos grow by accretion onto filaments, aligning their spins with the filaments, whereas high-mass halos grow by mergers along filaments, generating spins perpendicular to the filament. Here, we search for this alignment signal using filaments identified with the "Cosmic Web Reconstruction" algorithm applied to the Sloan Digital Sky Survey Main Galaxy Sample and galaxy spins from the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) integral-field unit survey. MaNGA produces a map of the galaxy's rotational velocity, allowing direct measurement of the galaxy's spin direction, or unit angular momentum vector projected onto the sky. We find no evidence for alignment between galaxy spins and filament directions. We do find hints of a mass-dependent alignment signal, which is in 2σ–3σ tension with the mass-dependent alignment signal in the MassiveBlack-II and Illustris hydrodynamical simulations. However, the tension vanishes when galaxy spin is measured using the Hα emission line velocity rather than stellar velocity. Lastly, in simulations we find that the mass-dependent transition from aligned to anti-aligned dark matter halo spins is not necessarily present in stellar spins: we find a stellar spin transition in Illustris but not in MassiveBlack-II, highlighting the sensitivity of spin-filament alignments to feedback prescriptions and subgrid physics.

79 ASTRONOMY AND ASTROPHYSICS↗

Natural Language Processing for Extracting Rich Disease Data Aligned To Satellite Meteorological Data

Global climate change is redefining our understanding of how diseases spread. In Sri Lanka, vector-borne diseases such as dengue fever, encephalitis, and leptospirosis historically surged during the monsoon seasons when temperatures were high enough for mosquito eggs to hatch. Unfortunately, due to rising temperatures and more erratic rainfall patterns, mosquito eggs can now hatch year-round and are increasingly unpredictable, leading to an alarmingly increasing number of hospitalizations and deaths. More data is needed to adapt our response to these diseases in an increasingly warmer world. In the contemporary landscape, a wealth of disease information is available, yet accessibility remains limited due to unstructured data formats such as PDFs. Therefore, converting unstructured disease reports into structured formats is necessary for effectively leveraging data. This paper introduces a comprehensive framework for collecting unstructured disease reports and transforming them into analyzable formats. By creating separate models tailored to each data format, we can ensure accuracy compared to general models. These straightforward models enhance accessibility and empower other researchers to use our tools. The returned structured data can then be harnessed for analysis, statistical purposes, and informing evidence-based public health interventions, thus facilitating more informed decision-making in healthcare. We deploy this framework to produce geospatial data for Sri Lanka and Brazil for many different conditions and align these data with satellite environmental data, providing for the first time a structured, aligned powerful dataset for disease modeling.

Open Source Open Science↗

Structural, optical and gas sensing properties of vertically well-aligned ZnO nanowires grown on graphene/Si substrate by thermal evaporation method

Highlights: • Vertically well-aligned ZnO NW arrays with high aspect ratio and extremely large-surface-volume ratio were synthesized on graphene/Si substrate without the aid of metal catalyst by a simple thermal evaporation. • The gas sensor based on the vertical ZnO NW arrays-graphene structure exhibited high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200oC, and could be used to detect NO{sub 2} gas at very low levels (2, 6, 10 ppm). • The excellent sensing performance is mainly because of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. • The common defects and optical properties of the ZnO NW arrays-graphene structure were studied in detail. • The possible growth mechanism of vertically well-aligned ZnO NWs on graphene and the gas-sensing mechanism of sensors were proposed. - Abstract: We report catalyst-free vertical growth of high-density ZnO nanowire (NW) arrays on Si substrate with a graphene buffer layer by thermal evaporation method. Structural, surface morphology, chemical composition and optical properties of ZnO NWs were studied by Field emission scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL) and Raman spectroscopy. The results indicate that the grown ZnO NWs are single-crystalline and exhibit the hexagonal wurtzite crystal structure with a preferred orientation along the [0001] direction; all of the ZnO NWs vertically grow on the graphene/Si substrate. The majority of the as-grown NWs have diameters in the range of 250–300 nm and length up to several tens of micrometers, whereas a small portion of NWs have a diameter of approximately of 9–12 nm. Room temperature PL spectrum of the ZnO NWs exhibits a sharp and strong ultraviolet emission at 380 nm and a weak visible emission at around 516 nm. The role of graphene buffer layer in the vertical-aligned ZnO NW arrays growth and its improved optical properties is demonstrated. Importantly, the gas sensor based on these ZnO NWs exhibits high sensitivity and rapid response/recovery characteristics to NO{sub 2} gas at 200 °C, and can detect NO{sub 2} concentration as low as 2, 6 and 10 ppm. The excellent sensing performance is mainly due to the combination of the large specific surface area and the presence of oxygen-vacancies at the surface of ZnO NWs, together with the creation of p-n heterojunctions between n-type ZnO NW and p-type graphene. Such a ZnO NW/graphene structure is very promising for various applications, such as photonic, optoelectronic and sensor devices. In addition, the possible growth mechanism and the NO{sub 2} sensing gas mechanism of the ZnO NWs-graphene structure have been discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Large-Area Chemically Modified Graphene Films: Electrophoretic Deposition and Characterization by Soft X-ray Absorption Spectroscopy

A facile, rapid, and scalable electrophoretic deposition approach is developed for the fabrication of large-area chemically derived graphene films on conductive substrates based on the electrophoretic deposition of graphene oxide and reduced graphene oxide components. Two distinctive approaches for fabricating conformal graphene films are developed. In the first approach, graphene oxide sheets are electrophoretically deposited from an aqueous solution after the oxidation of graphite to graphite oxide and the subsequent exfoliation of graphite oxide to graphene oxide. Next, the graphene oxide films are reduced via dip-coating in an aqueous solution of hydrazine. In the second approach, graphene oxide is reduced to graphene nanosheets in a strongly alkaline solution and the reduced graphene sheets are directly electrophoretically deposited onto conductive substrates. The film thickness can be modified by the deposition time and the obtained films span several square millimeters in area. Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy is used to study the surface chemistry, electronic band structure, and degree of alignment of the electrophoretically deposited films. Polarized NEXAFS measurements verify the presence of epoxide surface functionalities on the graphene basal planes and indicate significant recovery of extended p-bonded networks upon defunctionalization by hydrazine treatment. These measurements further indicate significantly improved alignment of the graphene sheet components of the films parallel to the substrate surface when defunctionalization is performed prior to electrophoretic deposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and magnetic properties of double perovskite Dy{sub 2}MnCoO{sub 6} by first-principles calculation

Using first-principles calculation, we investigate electronic and magnetic properties of Dy{sub 2}MnCoO{sub 6}. A detailed structural optimization has been done and found that the orthorhombic structure with Mn (Co) ions aligning along the longest axis type is the most stable structure. Within the generalized gradient approximation, the spin polarized calculations predict Dy{sub 2}MnCoO{sub 6} to be a half-metallic with ferromagnetic interaction between Mn and Co ions and antiferromagnetic interaction between Dy and Mn/Co ions. We also investigate the effect of Hubbard parameter (U) on the ground state magnetic structure. For all values of Hubbard U parameter the Co ions have nonzero magnetic moment; they do not lie in low-spin state, as in DyCoO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

From gas to stars in energetic environments: dense gas clumps in the 30 Doradus region within the Large Magellanic Cloud

We present parsec-scale interferometric maps of HCN(1-0) and HCO{sup +}(1-0) emission from dense gas in the star-forming region 30 Doradus, obtained using the Australia Telescope Compact Array. This extreme star-forming region, located in the Large Magellanic Cloud (LMC), is characterized by a very intense ultraviolet ionizing radiation field and sub-solar metallicity, both of which are expected to impact molecular cloud structure. We detect 13 bright, dense clumps within the 30 Doradus-10 giant molecular cloud. Some of the clumps are aligned along a filamentary structure with a characteristic spacing that is consistent with formation via varicose fluid instability. Our analysis shows that the filament is gravitationally unstable and collapsing to form stars. There is a good correlation between HCO{sup +} emission in the filament and signatures of recent star formation activity including H{sub 2}O masers and young stellar objects (YSOs). YSOs seem to continue along the same direction of the filament toward the massive compact star cluster R136 in the southwest. We present detailed comparisons of clump properties (masses, linewidths, and sizes) in 30Dor-10 to those in other star forming regions of the LMC (N159, N113, N105, and N44). Our analysis shows that the 30Dor-10 clumps have similar masses but wider linewidths and similar HCN/HCO{sup +} (1-0) line ratios as clumps detected in other LMC star-forming regions. Our results suggest that the dense molecular gas clumps in the interior of 30Dor-10 are well shielded against the intense ionizing field that is present in the 30 Doradus region.

79 ASTRONOMY AND ASTROPHYSICS↗

An Optimal Design For Steerable Dish Antenna With BWG

New design proposed for highly-efficient 34-m-diameter millimeter-wavelength antennas of NASA's Deep Space Network. Incorporates axial beam waveguide, BWG, and improved structure to maintain shape and alignment of reflecting surfaces. General approach to conceptual construction of structure to modularize overall system so critical constraint conditions pertaining to microwave optics and structural performance satisfied. Design retrofitted to existing NASA Deep Space Network 34-m antennas, or used as basis to build large ground-based steerable antennas. Engineering concepts involved in design adapted to design of other large, steerable antennas for telecommunications, radio astronomy, and military uses.

Chuang, K. L.↗

Polarimetric Remote Sensing of Geophysical Medium Structures

Polarimetric remote sensing of structures in geophysical media is studied in this paper based on their symmetry properties. Orientations of spheroidal scatterers described by spherical, uniform, planophile, plagiothile, erectophile, and extremophile distributions are considered to derive their polarimetric backscattering characteristics. These distributions can be identified from the observed scattering coefficients by comparison with theoretical symmetry calculations. A new parameter is defined to study scattering structures in geophysical media. Experimental observations from polarimetric data acquired by the Jet Propulsion Laboratory airborne synthetic aperture radar over forests, sea ice, and sea surface are presented to illustrate the use of symmetry properties. For forests, the coniferous forest in Mount Shasta area and mixed forests neir Presque Isle show evidence of the centrical symmetry at C band. In sea ice from the Beaufort Sea, multiyear sea ice has a cross-polarized ratio e close to e(sub 0), calculated from symmetry, due to the randomness in the scattering structure. For first-year sea ice, e is much smaller than e(sub 0) as a result of preferential alignment of the columnar structure of the ice. From polarimetric data of a sea surface in the Bering sea, it is observed that e and e(sub 0) are increasing with incident angle and e is greater than e(sub 0) at L band because of the directional feature of sea surface waves. Use of symmetry properties of geophysical media for polarimetric radar calibration is also suggested.

Nghiem, S. V.↗

Taxel-addressable matrix of vertical nanowire piezotronic transistors

A tactile sensing matrix includes a substrate, a first plurality of elongated electrode structures, a plurality of vertically aligned piezoelectric members, an insulating layer infused into the piezoelectric members and a second plurality of elongated electrode structures. The first plurality of elongated electrode structures is disposed on the substrate along a first orientation. The vertically aligned piezoelectric members is disposed on the first plurality of elongated electrode structures and form a matrix having columns of piezoelectric members disposed along the first orientation and rows of piezoelectric members disposed along a second orientation that is transverse to the first orientation. The second plurality of elongated electrode structures is disposed on the insulating layer along the second orientation. The elongated electrode structures form a Schottky contact with the piezoelectric members. When pressure is applied to the piezoelectric members, current flow therethrough is modulated.

36 MATERIALS SCIENCE↗

Current carriers for the field-aligned current system

The Dynamics Explorer satellites have returned a large body of data containing high resolution magnetometer measurements and distributions of charged particles of all but thermal electrons. From these data the relations of the field aligned currents to particle precipitation structures were investigated and the charge carriers were identified. Results include the following: (1) during very quiet periods, field aligned currents exist primarily as fine structure; (2) during onset of substorms, region 1 and region 2 become clearly evident but contain significant structure; (3) as magnetic activity subsides, current regions become less distinct, and structure becomes more dominant; (4) the distribution of the upward currents derived from magnetometer data and calculated from suprathermal electron data agree remarkably well in shape but not necessarily in magnitude; (5) at all local times, 5 eV electrons seldom carry most of the upward current; (6) except for the accelerated inverted-V electrons, the dominant upward current carriers which are measured are below 500 eV and are distributed in energy; (7) dusk upward currents (region 1) are associated with the boundary plasma sheet; and (8) suprathermal electron bursts are important current carrying structures.

Hoffman, R. A.↗

Current carriers for the field-aligned current system

The Dynamics Explorer satellites have returned a large body of data containing high resolution magnetometer measurements and distributions of charged particles of all but thermal electrons. From these data the relations of the field aligned currents to particle precipitation structures were investigated and the charge carriers were identified. Results include the following: (1) during very quiet periods, field aligned currents exist primarily as fine structure; (2) during onset of substorms, region 1 and region 2 become clearly evident but contain significant structure; (3) as magnetic activity subsides, current regions become less distinct, and structure becomes more dominant; (4) the distribution of the upward currents derived from magnetometer data and calculated from suprathermal electron data agree remarkably well in shape but not necessarily in magnitude; (5) at all local times, 5 eV electrons seldom carry most of the upward current; (6) except for the accelerated inverted-V electrons, the dominant upward current carriers which are masured are below 500 eV and are distributed in energy; (7) dusk upward currents (region 1) are associated with the boundary plasma sheet; and (8) suprathermal electron bursts are important current carrying structures.

Hoffman, R. A.↗

Protective barriers and related methods

Protective barriers for protecting assets (e.g., electrical power transformers and other substation components). The protective barrier may include a lower portion and an upper portion. The lower portion may include first and second laterally spaced A-frame structures having a first protective member assembly extending between aligned legs of the respective A-frame structures on one side thereof. The first protective member assembly may include a first plurality of substantially horizontally extending protective members oriented at an angle relative to a horizontal plane. The first and second A-frame structures may have a second protective member assembly extending between aligned legs of the respective A-frame structures on an opposing side thereof. The upper portion may comprise a third protective member assembly. Methods of making a protective barrier are also disclosed.

42 ENGINEERING↗