Search NASA⌕ Search

SEARCH · Search NASA

Results for “superconductor electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Evidence for a topological excitonic insulator in InAs/GaSb bilayers

Electron–hole pairing can occur in a dilute semimetal, transforming the system into an excitonic insulator state in which a gap spontaneously appears at the Fermi surface, analogous to a Bardeen–Cooper–Schrieffer (BCS) superconductor. Here, we report optical spectroscopic and electronic transport evidence for the formation of an excitonic insulator gap in an inverted InAs/GaSb quantum-well system at low temperatures and low electron–hole densities. Terahertz transmission spectra exhibit two absorption lines that are quantitatively consistent with predictions from the pair-breaking excitation dispersion calculated based on the BCS gap equation. Low-temperature electronic transport measurements reveal a gap of ~2 meV (or ~25 K) with a critical temperature of ~10 K in the bulk, together with quantized edge conductance, suggesting the occurrence of a topological excitonic insulator phase.

36 MATERIALS SCIENCE↗

Transitory Topochemical Tailoring of a van der Waals Superconductor

Topochemical intercalation is widely used to access metastable phases with novel electronic properties, but the reverse reaction (deintercalation) typically restores the original state, limiting practical use. Here, in this study, we present a topochemical approach that employs a sacrificial intercalant that thermally decomposes to irreversibly lock in the new electronic state. Using 2-aminobutane as the sacrificial intercalant, we convert the van der Waals (vdW) material 1T-TiSe 2 into a superconductor and the vdW superconductor 2H-NbSe 2 into a nonsuperconducting metal, while preserving the ability to exfoliate the resulting crystals. We find that this transitory intercalation increases the electron density in both materials and partially suppresses the CDW in TiSe 2 . By tuning the thermolysis temperature, we can systematically vary the carrier density in TiSe 2 , enabling us to map its phase diagram. The superconductivity in TiSe 2 is retained in exfoliated flakes, although with a lower critical temperature. This transitory topochemical strategy enables access to new electronic states with precisely tuned carrier densities that are otherwise inaccessible through direct solid-state synthesis.

36 MATERIALS SCIENCE↗

Resistance switching memory in perovskite oxides

The resistance switching behavior has recently attracted great attentions for its application as resistive random access memories (RRAMs) due to a variety of advantages such as simple structure, high-density, high-speed and low-power. As a leading storage media, the transition metal perovskite oxide owns the strong correlation of electrons and the stable crystal structure, which brings out multifunctionality such as ferroelectric, multiferroic, superconductor, and colossal magnetoresistance/electroresistance effect, etc. The existence of rich electronic phases, metal–insulator transition and the nonstoichiometric oxygen in perovskite oxide provides good platforms to insight into the resistive switching mechanisms. In this review, we first introduce the general characteristics of the resistance switching effects, the operation methods and the storage media. Then, the experimental evidences of conductive filaments, the transport and switching mechanisms, and the memory performances and enhancing methods of perovskite oxide based filamentary RRAM cells have been summarized and discussed. Subsequently, the switching mechanisms and the performances of the uniform RRAM cells associating with the carrier trapping/detrapping and the ferroelectric polarization switching have been discussed. Finally, the advices and outlook for further investigating the resistance switching and enhancing the memory performances are given.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rashba spin-orbit coupling enhanced magnetoresistance in junctions with one ferromagnet

We explain how Rashba spin-orbit coupling (SOC) in a two-dimensional electron gas (2DEG), or in a conventional s-wave superconductor, can lead to a large magnetoresistance even with one ferromagnet. However, such enhanced magnetoresistance is not generic and can be nonmonotonic and change its sign with Rashba SOC. For an in-plane rotation of magnetization, it is typically negligibly small for a 2DEG and depends on the perfect transmission which emerges from a spin-parity-time symmetry of the scattering states, while this symmetry is generally absent from the Hamiltonian of the system. The key difference from considering the normal-state magnetoresistance is the presence of the spin-dependent Andreev reflection at superconducting interfaces. In the fabricated junctions of quasi-2D van der Waals ferromagnets with conventional s-wave superconductors (Fe 0.29 ⁢TaS 2 /NbN) we find another example of enhanced magnetoresistance where the presence of Rashba SOC reduces the effective interfacial strength and is responsible for an equal-spin Andreev reflection. The observed nonmonotonic trend in the out-of-plane magnetoresistance with the interfacial barrier is an evidence for the proximity-induced equal-spin-triplet superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Density functional study of the over-doped iron chalcogenide: TlFe2Se2 with ThCr2Si2 structure

We report density functional calculations of electronic structure and magnetic properties of ternary iron chalcogenide TlFe{sub 2}Se{sub 2}, which occurs in the ThCr{sub 2}Si{sub 2} structure and discuss the results in relation to the iron-based superconductors. The ground state is antiferromagnetic with checkerboard order and Fe moment {approx}1.90{micro}{sub B}. There is strong magnetoelastic coupling similar to the Fe-based superconductors, reflected in a sensitivity of the Se position to magnetism. Tl is monovalent in this compound, providing heavy electron doping of 0.5 additional carriers per Fe relative to the parent compounds of the Fe-based superconductors. Other than the change in electron count, the electronic structure is rather similar to those materials. In particular, the Fermi surface is closely related to those of the Fe-based superconductors, except that the electron cylinders are larger, and the hole sections are suppressed. This removes the tendency toward a spin-density wave.

36 MATERIALS SCIENCE↗

Out-of-equilibrium heating of electron liquid : fermionic and bosonic temperatures.

We investigate out-of-the equilibrium properties of the electron liquid in a two-dimensional disordered superconductor subject to the electric bias and temperature gradient. We calculate kinetic coefficients and Nyquist noise, and find that they are characterized by distinct effective temperatures: T{sub e}, characterizing single-particle excitations, T{sub Cp}, describing the Cooper pairs, and T{sub eh}, corresponding to electron-hole or dipole excitations. Varying the ratio between the electric j and thermal j{sub th} currents and boundary conditions one can heat different kinds of excitations tuning their corresponding temperatures. We propose the experiment to determine these effective temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studies on the Composite System of Bi-2212 Glass Ceramic and MgB{sub 2} Superconductors

The composites of glass ceramic Bi-2212 and MgB{sub 2} superconductors were prepared at ambient conditions. The transmission electron microscopy images of the composite samples illustrate the presence of glass ceramic inclusions in bulk MgB{sub 2}. Temperature-dependent magnetization of the composite samples shows two superconducting transitions: one at 80 K corresponding to the Bi-2212 phase and a second one at 39 K corresponding to the MgB{sub 2} phase, suggesting that the two superconducting phases are separated with clear boundaries. The critical current density (J{sub c}) and pinning force values are increased in composite systems by an order of magnitude compared to that of individual samples. The pinning mechanism in the composite sample is the same as in the matrix phase. Reduced field maxima (h{sub max}) are observed at 0.15 for composite samples. A low value of h{sub max} for composite samples indicates the random orientation of grain boundaries and repulsive pinning force in the composite samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interplay between superconductivity and magnetism in iron-based superconductors

This proposal is for theoretical work on strongly correlated electron systems, which are at the center of experimental and theoretical activities in condensed-matter physics. The interest to this field is driven fascinating variety of observed effects, universality of underlying theoretical ideas, and practical applications. I propose to do research on Iron-based superconductors (FeSCs), which currently attract high attention in the physics community. My goal is to understand superconductivity and magnetism in these materials at various dopings, the interplay between the two, and the physics in the phase in which magnetism and superconductivity co-exist. A related goal is to understand the origin of the observed pseudogap-like behavior in the normal state.My research explores the idea that superconductivity is of electronic origin and is caused by the exchange of spin-fluctuations, enhanced due to close proximity to antiferromagnetism. The multi-orbital/multi-band nature of FeSCs opens routes for qualitatively new superconducting states, particularly the ones which break time-reversal symmetry. By all accounts, the coupling in pnictdes is below the threshold for Mott physics and I intend to analyze these systems within the itinerant approach.

36 MATERIALS SCIENCE↗

Calcium-Substituted Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} Ceramics Synthesized via Thermal Treatment Method: Structural and Superconducting Properties

In this work, Y{sub 3}(Ba{sub 1−x}Ca{sub x}){sub 5}Cu{sub 8}O{sub 18} compounds with x = 0.00, 0.01, 0.02, 0.03 and 0.05 were synthesized by thermal treatment of aqueous solution of metal nitrates and polyvinylpyrrolidone (PVP). The effects of Ca substitution on the crystal structure, electrical resistance and the microstructure of samples were investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), four-point probe measurement and AC susceptibility. FESEM analysis showed that there was an increase in the grain size and compactness. The zero-resistance critical temperature decreased from 92 K for the pure sample to 83 K for sample x = 0.05. From AC susceptibility result, the intra- and inter-granular loss peaks shifted toward lower temperature and become wider and broader with the increase of Ca substitution due to the weakening of grain coupling. On the other hand, the inter-granular critical current density (J{sub cm}) was found to increase with Ca substitution and has the highest value J{sub cm} = 35 A cm{sup − 2} at x = 0.05, indicating that the Ca substitution was associated with the formation of pinning centres in the Y-358 matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A strained silicon cold electron bolometer using Schottky contacts

We describe optical characterisation of a strained silicon cold electron bolometer (CEB), operating on a 350 mK stage, designed for absorption of millimetre-wave radiation. The silicon cold electron bolometer utilises Schottky contacts between a superconductor and an n{sup ++} doped silicon island to detect changes in the temperature of the charge carriers in the silicon, due to variations in absorbed radiation. By using strained silicon as the absorber, we decrease the electron-phonon coupling in the device and increase the responsivity to incoming power. The strained silicon absorber is coupled to a planar aluminium twin-slot antenna designed to couple to 160 GHz and that serves as the superconducting contacts. From the measured optical responsivity and spectral response, we calculate a maximum optical efficiency of 50% for radiation coupled into the device by the planar antenna and an overall noise equivalent power, referred to absorbed optical power, of 1.1×10{sup −16} W Hz{sup −1/2} when the detector is observing a 300 K source through a 4 K throughput limiting aperture. Even though this optical system is not optimized, we measure a system noise equivalent temperature difference of 6 mK Hz{sup −1/2}. We measure the noise of the device using a cross-correlation of time stream data, measured simultaneously with two junction field-effect transistor amplifiers, with a base correlated noise level of 300 pV Hz{sup −1/2} and find that the total noise is consistent with a combination of photon noise, current shot noise, and electron-phonon thermal noise.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Majorana bound states in a d -wave superconductor planar Josephson junction

We study phase-controlled planar Josephson junctions comprising a two-dimensional electron gas with strong spin-orbit coupling and d-wave superconductors, which have an advantage of a high critical temperature. We show that a region between the two superconductors can be tuned into a topological state by the in-plane Zeeman field, and can host Majorana bound states. The phase diagram as a function of the Zeeman field, chemical potential, and the phase difference between superconductors exhibits the appearance of Majorana bound states for a wide range of parameters. We further investigate the behavior of the topological gap and its dependence on the type of d-wave pairing, i.e., d, d+is, or d+id', and note the difficulties that can arise due to the presence of gapless excitations in pure d-wave superconductors. On the other hand, the planar Josephson junctions based on superconductors with d+is and d+id' pairings can potentially lead to realizations of Majorana bound states. Furthermore, our proposal can be realized in cuprate superconductors, e.g., in a twisted bilayer, combined with the layered semiconductor Bi 2 O 2 Se.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hybridization and superconducting gaps in heavy-fermion superconductor PuCoGa5 probed via the dynamics of photoinduced quasiparticles

We have examined the relaxation of photoinduced quasiparticles in the heavy-fermion superconductor PuCoGa{sub 5}. The deduced electron-phonon coupling constant is incompatible with the measured superconducting transition temperature T{sub c}, which speaks against phonon-mediated superconducting pairing. Upon lowering the temperature, we observe an order-of-magnitude increase of the quasiparticle relaxation time in agreement with the phonon bottleneck scenario - evidence for the presence of a hybridization gap in the electronic density of states. The modification of photoinduced reflectance in the superconducting state is consistent with the heavy character of the quasiparticles that participate in Cooper pairing. The discovery of relatively high-temperature superconductivity in the Pu-based compounds PuCoGa{sub 5} (T{sub c} = 18.5 K) and PuRhGa{sub 5} (T{sub c} = 8.7 K) has renewed the interest in actinide materials research. The Pu-based superconductors share the HoCoGa{sub 5}-type tetragonal lattice stucture with the Ce-based series of compounds (CeRhIn{sub 5}, CeCoIn{sub 5}, and CeIrIn{sub 5}) commonly referred to as '115' materials. In the Ce-based 115 compounds, CeIrIn{sub 5} (T{sub c} = 0.4 K) and CeCoIn{sub 5} (T{sub c} = 2.3 K), display superconductivity at ambient pressure. Both Ce- and Pu-based 115 compounds display the heavy fermion behavior resulting from the influence of 4f (Ce) and 5f (Pu) electrons. The most intriguing question concerns the origin of superconductivity (SC) in the 115 materials. In the Ce series, the d-wave symmetry of the SC order parameter and the proximity of SC order to magnetism have lead to a widespread belief that the unconventional SC is induced by antiferromagnetic spin fluctuations. In the Pu compounds, two possible scenarios regarding the SC mechanism have been considered: one approach favors a magnetically mediated unconventional SC similar to that in CeCoIn{sub 5}. In the other scenario, the conventional SC is mediated by phonons, where the strength of the electron-phonon (e-ph) coupling {lambda} is the crucial parameter that sets the superconducting transition temperature T{sub c}. In this Letter, we present a measurement of the e-ph coupling constant {lambda} via the pump-probe optical study of the room-temperature relaxation time of photoinduced reflectance. We find that e-ph coupling ({lambda} = 0.2-0.26) is too weak to explain the high T{sub c} of PuCoGa{sub 5} and that phonon-mediated superconductivity is unlikely in this material. Upon lowering the temperature in the normal state (T > T{sub c}), we find an order-of-magnitude increase in the relaxation time consistent with a phonon bottleneck, similar to other heavy-fermion materials, which provides the first optical evidence of the presence of a hybridization gap in the electronic density of states (DOS). Below T{sub c}, the photoinduced response exhibits dramatic changes that we ascribe to the opening of the superconducting (SC) gap at the Fermi level. The observed dynamics confirms that the same quasiparticles detected in the normal state, i.e., the heavy quasiparticles, also participate in the SC pairing. Our study is the first to directly probe the electronic structure of PuCoGa{sub 5} in the SC state and corroborate that fact. Our results are consistent with the theoretical investigations, which find that the electronic structure is dominated by cylindrical sheets of Fermi surfaces with large 5f electron character, suggesting that the delocalized 5f electrons of Pu playa key role in the superconducting pairing.

36 MATERIALS SCIENCE↗

Distribution and mobility of lithium in NASICON-type Li1-xTi2-xNbx(PO4)3 (0 ≤ x ≤ 0.5) compounds

Highlights: • Li{sub 1-x}Ti{sub 2-x}Nb{sub x}(PO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) were prepared via solid-state reaction. • The substitution of Ti{sup 4+} by Nb{sup 5+} in LiTi{sub 2}(PO{sub 4}){sub 3} increases unit cell dimensions. • The Rietveld analysis of XRD patterns was performed to deduce location of Li ions. • LiTi{sub 2}(PO{sub 4}){sub 3} have the highest total conductivity and low activation energy. - Abstract: The NASICON-type Li{sub 1-x}Ti{sub 2-x}Nb{sub x}(PO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) has been prepared using a conventional solid-state reaction and characterized by powder X-ray (XRD), scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) and impedance spectroscopy (IS). The substitution of Ti{sup 4+} by Nb{sup 5+} in LiTi{sub 2}(PO{sub 4}){sub 3} increases unit cell parameters of NASICON phases (S.G. R 3-bar c). The parallel XRD and NMR analysis confirmed the formation of secondary phases besides NASICON compounds. The NMR components detected in {sup 93}Nb and {sup 31}P MAS-NMR spectra have been ascribed to formation of crystalline NbPO{sub 5} and NASICON phases. The substitution of Ti{sup 4+} by Nb{sup 5+} produces detection of three equally spaced {sup 31}P MAS-NMR P(OTi){sub 4-n}(ONb){sub n} components, whose intensity changes with the Nb content of the NASICON phase. On the other hand, the broad {sup 31}P NMR band detected at ∼−130 ppm has been ascribed to the formation of an amorphous Nb phosphate that strongly affects conductivity of samples. At 355 K, total conductivity decreased from 1.2 × 10{sup −7} S cm{sup −1} (Ea = 0.49 eV) to 6.0 × 10{sup −9} S cm{sup −1} (Ea = 0.56 eV) when going from LiTi{sub 2}(PO{sub 4}){sub 3} to Li{sub 0.5}Ti{sub 1.5}Nb{sub 0.5}(PO{sub 4}){sub 3}. This important decrease has been related to the increment of activation energy (stronger Li-network interaction); however, further studies are required to understand the deleterious effect of niobium in Li{sub 1-x}Ti{sub 2-x}Nb{sub x} (PO{sub 4}){sub 3} series.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new elliptical-beam method based on time-domain thermoreflectance (TDTR) to measure the in-plane anisotropic thermal conductivity and its comparison with the beam-offset method

Materials lacking in-plane symmetry are ubiquitous in a wide range of applications such as electronics, thermoelectrics, and high-temperature superconductors, in all of which the thermal properties of the materials play a critical part. Yet, very few experimental techniques can be used to measure in-plane anisotropic thermal conductivity. A beam-offset method based on time-domain thermoreflectance (TDTR) was previously proposed to measure in-plane anisotropic thermal conductivity. However, a detailed analysis of the beam-offset method is still lacking. Our analysis shows that uncertainties can be large if the laser spot size or the modulation frequency is not properly chosen. In this report we propose an differing approach based on TDTR to measure in-plane anisotropic thermal conductivity using a highly elliptical pump (heating) beam. The highly elliptical pump beam induces a quasi-one-dimensional temperature profile on the sample surface that has a fast decay along the short axis of the pump beam. The detected TDTR signal is exclusively sensitive to the in-plane thermal conductivity along the short axis of the elliptical beam. By conducting TDTR measurements as a function of delay time with the rotation of the elliptical pump beam to different orientations, the in-plane thermal conductivity tensor of the sample can be determined. In this work, we first conduct detailed signal sensitivity analyses for both techniques and provide guidelines in determining the optimal experimental conditions. We then compare the two techniques under their optimal experimental conditions by measuring the in-plane thermal conductivity tensor of a ZnO [11-20] sample. The accuracy and limitations of both methods are discussed.

47 OTHER INSTRUMENTATION↗

Concealed d -wave pairs in the s ± condensate of iron-based superconductors

Significance Inspired by the hidden spin entanglement in superfluid Helium-3B, we propose that orbitally entangled Cooper pairs of d -wave character lie within the s -wave condensate of iron-based superconductors. This order is revealed when the topologically nontrivial helical nature of the band structure is taken into account. The hidden d-wave character lowers the Coulomb repulsion energy and accounts for the observed phase transition from a fully gapped s -wave to a nodal octet superconductor within a single pairing mechanism. We predict that this entangled superconductor will display a shift in the orbital character of its quasiparticles on pair condensation, and will form Andreev edge states at the domain wall between its s -wave and an octet phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transverse fields to tune an Ising-nematic quantum phase transition

Significance Many interesting materials, including various high-temperature superconductors, exhibit a low-temperature “electron nematic” phase in which the electronic properties spontaneously break the rotational symmetry of the crystal. A nematic quantum critical point (QCP) marks the zero-temperature phase transition from a nematic ground state to a symmetric state as a function of a macroscopic nonthermal parameter. Here, we examine appropriate general means to tune Ising nematic systems to a QCP and in particular show that shear strain is a powerful tuning parameter. Moreover, we identify 4f ferroquadrupolar order as a realization of Ising nematic order and argue that it provides a promising platform for fundamental studies of metallic QCPs in the laboratory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonlocal correlations in iron pnictides and chalcogenides

Deviations of low-energy electronic structurse of iron-based superconductors from density-functional-theory predictions have been parametrized in terms of band- and orbital-dependent mass renormalizations and energy shifts. The former have typically been described in terms of a local self-energy within the framework of dynamical mean field theory, while the latter appears to require nonlocal effects due to interband scattering. By calculating the renormalized band structure in both random phase approximation (RPA) and the two-particle self-consistent approximation (TPSC), we show that correlations in pnictide systems like LaFeAsO and LiFeAs can be described rather well by a nonlocal self-energy. In particular, Fermi pocket shrinkage as seen in experiments occurs due to repulsive interband finite-energy scattering. For the canonical iron chalcogenide system FeSe in its bulk tetragonal phase, the situation is, however, more complex since even including momentum-dependent band renormalizations cannot explain experimental findings. We propose that the nearest-neighbor Coulomb interaction may play an important role in band-structure renormalization in FeSe. Finally, we further compare our evaluations of nonlocal quasiparticle scattering lifetime within RPA and TPSC with experimental data for LiFeAs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗