Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Dissociative Chemisorption and Oxidation of H 2 on the Stoichiometric IrO 2 (110) Surface

In this work, we investigated the dissociative chemisorption and oxidation of H 2 and D 2 on the stoichiometric IrO 2 (110) surface (“s-IrO 2 (110)”) using temperature programmed reaction spectroscopy (TPRS) and density functional theory (DFT) calculations. We find that the dissociative chemisorption of hydrogen occurs efficiently on s-IrO 2 (110) during adsorption at 90 K, with ~90% of the dissociated H 2 oxidizing to H 2 O during TPRS and evolving in a broad feature between 400 and 800 K. We also observe small quantities of H 2 desorbing in TPRS peaks at 200 K and 530 K, and show that these peaks arise from the desorption of molecularly-adsorbed H 2 and the recombination of atomic hydrogen, respectively. Our results demonstrate that H 2 dissociation on s-IrO 2 (110) occurs by a precursor-mediated mechanism wherein H 2 molecules adsorb strongly on coordinatively-unsaturated Ir atoms (Ircus) and the resulting σ-complexes then serve as precursors for H 2 bond cleavage. Our DFT calculations predict that H 2 adsorbs strongly on an atop-Ircus site, and that the H 2 complex can dissociate by a facile pathway involving H-transfer to a neighboring bridging O atom (Obr) to produce an H-Ircus/HObr pair. For this pathway, we predict that the energy barrier for dissociation is ~65 kJ/mol lower than the binding energy of the adsorbed H 2 complex. We also find that the total hydrogen uptake on s-IrO 2 (110) saturates at an H 2 coverage of ~0.65 ML during adsorption at 90 K, and present evidence that this limited uptake results from a strong influence of HObr groups on H 2 sigma-complex formation. Finally, we used DFT to examine pathways for H 2 O formation on s-IrO 2 (110) and find that steps leading directly to H 2 O formation are energetically demanding and likely determine the overall rate of H 2 oxidation on s-IrO 2 (110).

Dissociative Chemisorption↗

The response of the Space Shuttle Orbiter graphite/epoxy sandwich panels to exposure to moisture and heat

The Shuttle Orbiter Payload Bay Door is covered with graphite/epoxy sandwich panels. Their interaction with ground environments causes a moisture absorption of approximately 1.0% by weight at the time of launch. During the reentry phase the temperature of the outer facesheets rises to 177 C and their moisture content diminishes to 0.65%. In this condition the facesheet strength deteriorates significantly. Also, desorption of moisture produces an internal pressure in the panels of ca. 345 kPa. The paper discusses the prediction of expected moisture levels in the constituent parts of the sandwich panels. It describes further the test program necessary to assess the residual strength of the facesheets and the internal pressure capability of the sandwich panels.

Zigrang, D. J.↗

MOD: An Instrument for the 2005 Mars Explorer Program HEDS Payload

The Mars Organic Detector (MOD) was recently selected for the definition phase of the HEDS '05 (originally scheduled for '03) lander instrument package for fundamental biology and in situ resource utilization. MOD is designed to detect organic compounds in rock and soil samples directly on the surface of Mars in order to assess the biological potential of the planet. In addition, a MOD Tunable Diode Laser Spectrometer (TDLS) will provide information on desorption and decomposition temperatures, as well as the release rates and quantities of water and carbon dioxide that can be liberated from regolith samples, thereby providing the parameters needed for the design of systems for the future large-scale in situ extraction of valuable consumable resources. A MOD TDLS will also measure the atmospheric water and carbon dioxide content, as well as the atmospheric carbon dioxide isotopic composition, in order to determine whether there is an isotopic offset between atmospheric and surface carbon.

Bada, J. L.↗

3-Methyl-1,2-BN-Cyclopentane: A Promising H2 Storage Material?

We provide detailed characterization of properties for 3-methyl-1,2-BN-cyclopentane 1 that are relevant to H2 storage applications such as viscosity, thermal stability, H2 gas stream purity, and polarity. The viscosity of 1 at room temperature is 25±5 cP, about one fourth the viscosity of olive oil. TGA/MS analysis indicates that liquid carrier 1 is thermally stable at 30 °C but decomposes slowly at 50 °C. RGA data suggest that the H2 desorption from 1 is a clean process, producing relatively pure H2 gas. Compound 1 is a polar zwitterionic type liquid consistent with theoretical predictions and solvatochromic studies. "T.A. acknowledges support from the Fuel Cell Technology Program at U.S. DOE, Office of Energy Efficiency 65 and Renewable Energy. Pacific Northwest National Laboratory is operated by Battelle."

Luo, Wei↗

Hydrogen Diffusivity Measurements of YH 1.87 Moderator Material with Incoherent Quasielastic Neutron Scattering

Yttrium hydride is an optimal choice of moderator material for thermal neutron spectrum reactors requiring small core volumes. The Transformation Challenge Reactor (TCR) program at Oak Ridge National Laboratory (ORNL) aims to develop an additively manufactured microreactor core by leveraging recent advances in materials, manufacturing, data analytics, and high-fidelity modeling and simulation. Yttrium hydride was selected as the moderator material for TCR due to its high moderating power, which enables the spatially efficient reactor design and thermal stability that is superior when compared with zirconium hydride. Hydrogen desorption from yttrium hydride is expected at elevated temperatures, posing safety and performance concerns. As a lifetime component in advanced reactors, appropriate strategies to mitigate hydrogen release from yttrium hydride over long-term reactor operation are required. Understanding hydrogen mobility in yttrium hydride provides the scientific basis for developing a hydrogen barrier for hydride moderator and predicting the hydrogen redistribution within the material during various operational conditions. This study investigated the hydrogen motion in YH 1.87 as a function of temperature ranging from 200 to 1,173 K using incoherent quasielastic neutron scattering (IQNS) at the Spallation Neutron Source (SNS). The results are presented and discussed in terms of hydrogen self-diffusion coefficients, activation energy for translational hydrogen motion, and hydrogen jump distances. Based on the IQNS data, YH 1.87 is found to be stable at high temperatures with no translational H motion below 1,023 K within the IQNS detection limits. In the temperature range of 1,073–1,173 K, hydrogen diffusivity in YH 1.87 is $D = 4.57 X 10^{⁻3} [m^2/s] exp (⁻\frac{1.73[eV]}{RT}$). The hydrogen concentration’s dependence on hydrogen diffusivity is also discussed in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

TEMPERATURE SPECTRA OF INTERSTELLAR DUST GRAINS HEATED BY COSMIC RAYS. I. TRANSLUCENT CLOUDS

Heating of whole interstellar dust grains by cosmic-ray (CR) particles affects the gas–grain chemistry in molecular clouds by promoting molecule desorption, diffusion, and chemical reactions on grain surfaces. The frequency of such heating, f{sub T}, s{sup −1}, determines how often a certain temperature T{sub CR}, K, is reached for grains hit by CR particles. This study aims to provide astrochemists with a comprehensive and updated data set on CR-induced whole-grain heating. We present calculations of f{sub T} and T{sub CR} spectra for bare olivine grains with radius a of 0.05, 0.1, and 0.2 μ m and such grains covered with ice mantles of thickness 0.1 a and 0.3 a . Grain shape and structure effects are considered, as well as 30 CR elemental constituents with an updated energy spectrum corresponding to a translucent cloud with A{sub V} = 2 mag. Energy deposition by CRs in grain material was calculated with the srim program. We report full T{sub CR} spectra for all nine grain types and consider initial grain temperatures of 10 K and 20 K. We also provide frequencies for a range of minimum T{sub CR} values. The calculated data set can be simply and flexibly implemented in astrochemical models. The results show that, in the case of translucent clouds, the currently adopted rate for heating of whole grains to temperatures in excess of 70 K is underestimated by approximately two orders of magnitude in astrochemical numerical simulations. Additionally, grains are heated by CRs to modest temperatures (20–30 K) with intervals of a few years, which reduces the possibility of ice chemical explosions.

79 ASTRONOMY AND ASTROPHYSICS↗

Interaction of Peroxynitric Acid with Solid H2O Ice

The uptake of peroxynitric acid (PNA), HO2NO2 or HNO4, on solid H2O ice at 193 K (-80 C) was studied using a fast flow-mass spectrometric technique. An uptake coefficient of 0.15 +/- 0.10 was measured, where the quoted uncertainty denotes 2 standard deviations. The uptake process did not result in the production of gas phase products. The composition of the condensed phase was investigated using programmed heating (3 K/min) of the substrate coupled with mass spectrometric detection of desorbed species. Significant quantities of HNO, and HNO3 desorbed from the substrates at temperatures above 225 K and 246 K, respectively. The desorbed HNO3, which was less than 9% of the desorbed HNO, and remained unchanged upon incubation of the substrate, was likely due to impurities in the HNO4 samples rather than reaction of HNO, on the substrate. The onset temperatures for HNO4 desorption increased with increasing H2O to HNO4 ratios, indicating that HNO4, like HNO3, tends to be hydrated in the presence of water. These observations suggest possible mechanisms for removal of HNO4 or repartitioning of total odd nitrogen species in the Earth's upper troposphere and stratosphere.

Li, Zhuangjie↗

Isolating the detrapping of deuterium in heavy ion damaged tungsten via partial thermal desorption

Partial Thermal Desorption Spectrometry (pTDS) progressively depopulated trapped deuterium (D) from heavy-ion damaged tungsten (W) to determine spatial location and detrapping energies. W samples were prepared identically: 5 MeV Cu2+ damaging ions (0.12 peak dpa dose) before D2 plasma loading (1024 D/m2 fluence) held at 373 K. Each sample reached one of six pTDS peak-and-hold temperatures. Nuclear Reaction Analysis (NRA) measured the D spatial profile remaining after pTDS, before final TDS. NRA and TDS measured total D retention were in good agreement. NRA displayed three zones of D-populated defects: (I) near-surface (below 0.1 µm), (II) heavy-ion damage (peaked ~1 µm), and (III) uniform intrinsic (bulk). D concentration in zone I reduced by ~ 97% in samples with pTDS at 597 K and higher, indicating near-surface traps have low detrapping energy. The Stopping and Range of Ions in Matter (SRIM) predicts a displacement profile for zone II that coincided with measured D profile for samples with pTDS at 597 K and higher. Samples prepared with pTDS below 597 K display a distinctly different D profile in zone II. The complete cycle of D2 plasma loading, pTDS, NRA, and final TDS was modeled with Tritium Migration Analysis Program (TMAP) using a recently developed Pseudo Trap and Temperature Partition (PTTP) scheme. Differences in TDS profiles isolated traps that release between consecutive pTDS temperatures, demonstrating 6 distinct release peaks. The best fit was found with detrapping energies near 1.0, 1.2, 1.4, 1.6, 1.8, and 1.9 eV. These results show that heating at 762 K for 2.5 hours released ~99% of retained D in heavy-ion damaged W.

36 MATERIALS SCIENCE↗

Advanced air revitalization system modeling and testing

To support manned lunar and Martian exploration, an extensive evaluation of air revitalization subsystems (ARS) is being conducted. The major operations under study include carbon dioxide removal and reduction; oxygen and nitrogen production, storage, and distribution; humidity and temperature control; and trace contaminant control. A comprehensive analysis program based on a generalized block flow model was developed to facilitate the evaluation of various processes and their interaction. ASPEN PLUS was used in modelling carbon dioxide removal and reduction. Several life support test stands were developed to test new and existing technologies for their potential applicability in space. The goal was to identify processes which use compact, lightweight equipment and maximize the recovery of oxygen and water. The carbon dioxide removal test stands include solid amine/vacuum desorption (SAVD), regenerative silver oxide chemisorption, and electrochemical carbon dioxide concentration (EDC). Membrane-based carbon dioxide removal and humidity control, catalytic reduction of carbon dioxide, and catalytic oxidation of trace contaminants were also investigated.

Dall-Baumann, Liese↗

Irradiation effect on deuterium behaviour in low-dose HFIR neutron-irradiated tungsten

Tungsten samples were irradiated by neutrons in the High Flux Isotope Reactor, Oak Ridge National Laboratory at reactor coolant temperatures of 50-70°C to low displacement damage of 0.025 and 0.3 dpa under the framework of the US-Japan TITAN program (2007-2013). After cooling down, the HFIR neutron-irradiated tungsten samples were exposed to deuterium plasmas in the Tritium Plasma Experiment, Idaho National Laboratory at 100, 200 and 500 °C twice at the ion fluence of 5×10²⁵ m⁻² to reach a total ion fluence of 1×10²⁶ m⁻² in order to investigate the near surface deuterium retention and saturation via nuclear reaction analysis. Final thermal desorption spectroscopy was performed to elucidate irradiation effect on total deuterium retention. Nuclear reaction analysis results showed that the maximum near surface (<5 µm depth) deuterium concentration increased from 0.5 at % D/W in 0.025 dpa samples to 0.8 at. % D/W in 0.3 dpa samples. The large discrepancy between the total retention via thermal desorption spectroscopy and the near surface retention via nuclear reaction analysis indicated the deuterium was migrated and trapped in bulk (at least 50 µm depth for 0.025 dpa and 35 µm depth for 0.025 dpa) at 500 °C case even in the relatively low ion fluence of 10²⁶ m⁻².

36 MATERIALS SCIENCE↗

Relative sliding durability of two candidate high temperature oxide fiber seal materials

A test program to determine the relative sliding durability of two candidate ceramic fibers for high temperature sliding seal applications is described. Pin on disk tests were used to evaluate potential seal materials. Friction during the tests and fiber wear, indicated by the extent of fibers broken in a test bundle or yarn, was measured at the end of a test. In general, friction and wear increase with test temperature. This may be due to a reduction in fiber strength, a change in the surface chemistry at the fiber/counterface interface due to oxidation, adsorption and/or desorption of surface species and, to a lesser extent, an increase in counterface surface roughness due to oxidation at elevated temperatures. The relative fiber durability correlates with tensile strength indicating that tensile data, which is more readily available than sliding durability data, may be useful in predicting fiber wear behavior under various conditions. A simple model developed using dimensional analysis shows that the fiber durability is related to a dimensionless parameter which represents the ratio of the fiber strength to the fiber stresses imposed by sliding.

Dellacorte, Christopher↗

Relative sliding durability of two candidate high temperature oxide fiber seal materials

A test program to determine the relative sliding durability of two candidate ceramic fibers for high temperature sliding seal applications is described. Pin on disk tests were used to evaluate potential seal materials. Friction during the tests and fiber wear, indicated by the extent of fibers broken in a test bundle or yarn, was measured at the end of a test. In general, friction and wear increase with test temperature. This may be due to a reduction in fiber strength, a change in the surface chemistry at the fiber/counterface interface due to oxidation, adsorption and/or desorption of surface species and, to a lesser extent, an increase in counterface surface roughness due to oxidation at elevated temperatures. The relative fiber durability correlates with tensile strength indicating that tensile data, which is more readily available than sliding durability data, may be useful in predicting fiber wear behavior under various conditions. A simple model developed using dimensional analysis shows that the fiber durability is related to a dimensionless parameter which represents the ratio of the fiber strength to the fiber stresses imposed by sliding.

Dellacorte, Christopher↗

Measurements of the H2(13)CO ortho/para ratio in cold dark molecular clouds

H2(13)CO has been detected for the first time toward cold dark molecular clouds using the NRAO 12 m telescope. The H2(13)CO ortho/para abundance ratio R for B335, which we report as R approximately 1.7, suggests equilibrium at the local kinetic temperature and appears to be distinctly different from that for both TMC-1 and L134N, where R is close to or higher than the statistical value 3. Since only B335 among the observed positions includes an imbedded IR source, this difference may result from heating of the grain surfaces, providing the energy necessary for desorption of formaldehyde formed on the grains.

NASA Discipline Exobiology↗

Surface chlorination of IrO2(110) by HCl

The ability to controllably chlorinate metal-oxide surfaces can provide opportunities for designing selective oxidation catalysts. In the present study, we investigated the surface chlorination of IrO2(110) by HCl using temperature programmed reaction spectroscopy (TPRS), x-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. We find that exposing IrO2(110) to HCl, followed by heating to 650 K in ultrahigh vacuum, produces nearly equal quantities of on-top and bridging Cl atoms on the surface, Clt and Clbr, where the Clbr atoms replace O-atoms that are removed from the surface by H2O formation. After HCl adsorption at 85 K, only H2O desorbs at low Cl coverages during TPRS, but HCl begins to desorb in increasing yields as the Cl coverage is increased above about 0.5 monolayer (ML). The desorption of Cl2 was not observed under any conditions, in good agreement with the high barrier for this reaction predicted by DFT. A maximum Cl coverage of 1 ML, with nearly equal coverages of Clt and Clbr atoms, could be generated by reacting HCl with IrO2(110) in UHV. Our results suggest that a kinetic competition between recombinative HCl and H2O desorption under the conditions studied limits the saturation Cl coverage to a value less than the 2 ML maximum predicted by thermodynamics. XPS further shows that the partitioning of Cl between the Clt and Clbr states can be altered by subjecting partially chlorinated IrO2(110) to reductive or oxidative treatments, demonstrating that the Cl site population can change dynamically in response to the gas environment. Our results provide insights for understanding the chlorination of IrO2(110) by HCl and can enable future experimental studies to determine how Cl-modification alters the surface chemical reactivity of IrO2(110) and potentially enhances selectivity toward partial oxidation chemistry.

Chemistry↗

Passive Cooling in Aerogel-Based Insulation Systems for Liquid Hydrogen Upper Stage Launch Vehicle Tanks

Spray-On Foam Insulation (SOFI) is typically used to protect the windward-facing side of flight tanks for space launch vehicle liquid hydrogen (LH2) stages. SOFI is an excellent insulator in ambient pressure environments, however, its performance pales in comparison to reflective-type systems such as Multi-Layer Insulation in the thermal radiation dominated vacuum environment of space. If a windward insulation system employing radiation shields could be devised to replace or supplement SOFI, the on-orbit heat load could be drastically reduced, and the residual propellants could then be used to facilitate secondary missions. Such insulation systems, utilizing aerogel blanket insulation, have been explored by the Cryogenics Test Laboratory at NASA Kennedy Space Center. Owing to its nano-porous structure, aerogel is an excellent adsorbent as well as an insulator at cryogenic temperatures and will readily uptake condensable background gasses such as air when protecting a surface near LH2 temperatures. When an adsorbed blanket is rapidly exposed to a vacuum, such as during the ascent of a rocket, it will release the background gas, producing a passive cooling effect that could potentially reduce or eliminate the heat load on the propellant tank for a time. This work discusses the setup and results of a test program carried out to determine the effectiveness and impact of this cooling effect as it pertains to LH2 upper stage tanks. A vertical-cylindrical liquid nitrogen (LN2) calorimeter test instrument acted as the upper stage analog. The cold-mass was wrapped with two layers of 10 mm thick aerogel blanket material, with and without aluminum heat shields depending on the test, and interspersed with numerous thermocouple temperature sensors. Gaseous argon was used as a stand-in for air as the condensable background gas. The test procedure mimicked vehicle cryo-loading/stabilization, and ascent phases, with the ascent phase accomplished using parallel vacuum pumps. Results show that the desorption cooling effect was enough to not only eliminate the heat load on the LN2 cold-mass entirely, but further refrigerated the liquid below its boiling point.

A.M. Swanger↗

The Role of Surface Hydroxyls in Dehydration and Dehydrogenation of Formic Acid on Fe 3 O 4 (001)

Understanding the role of surface structure and hydroxylation in catalytic reactions on metal oxide surfaces is important for developing a mechanistic insight into the complex interface processes. Here, we investigate the reactivity of formic acid on reconstructed Fe 3 O 4 (001) using a combination of X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, temperature-programmed reaction spectroscopy, low energy electron diffraction, and electronic structure calculations. We find that formic acid initially dissociates at low temperatures (< 80 K) into bidentate formate and a hydroxyl up to an initial dosed coverage of two HCOOH per Fe 3 O 4 (001) unit cell. At higher temperatures (> 450 K), formate largely decomposes along the dehydration pathway, producing CO and H 2 O, with dehydrogenation to CO 2 being a minority side reaction. As a first step, water formation leads to surface oxygen extraction via the Mars-van Krevelen mechanism. Computational studies reveal formate embedded in oxygen vacancies as a key intermediate in the CO formation mechanism. CO formation proceeds via two reaction pathways with desorption that peaks at 530 K on the hydroxyl-rich surface and 560 K on the hydroxyl-deficient surface. Atomic hydrogen coadsorption experiments and ab initio calculations reveal that the presence of surface hydroxyls reduces the CO formation barrier. Furthermore, these results highlight the complex interactions between substrate and intermediate species occurring during reactions on metal oxide surfaces.

Adsorption↗

About the Barriers to Reaction of CCl4 with HFeOH and FeCl2

The reactivity of iron nanoparticles in aqueous environments has received considerable attention due to their potential utilization in environmental remediation technologies. As part of a broader program aiming at an improved understanding of the mechanisms involved in the degradation of harmful chlorocarbons, joint experimental and computational studies of model systems were initiated. We previously reported on the reaction of one and two Fe atoms reactions with carbon tetrachloride (CCl4) in direct mimic of “atom-dropping” experiments, with insights into the formation of novel iron-carbon-chlorine complexes, their structures and possible reaction mechanisms. Increasing the level of complexity, we report here on the modeling of the reaction of HFeOH and CCl4 as companion research of recent ultra high vacuum experiments of the reaction of Fe with water and CCl4. HFeOH is a stable molecular species formed in the reaction of Fe with H2O. Experimentally the (Fe, H2O, CCl4) system showed no reactivity up to the desorption temperature of CCl4. Electron correlated CCSD(T) calculations (at DFT(B3LYP) optimized structures) indicated an energy barrier to reactivity of 24.5 kcal/mol following the formation of a stable ( 7.5 kcal/mol) long-range precursor complex. This finding is consistent with the lack of experimentally detected reaction products. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DNA-Directed Non-Langmuir Deposition of Programmable Atom Equivalents

Particle assembly at interfaces via programmed DNA interactions allows for independent modification of both nanoparticle–surface interaction strength and the magnitude of interparticle repulsion. Together, these factors allow for modification of the deposited thin film morphology via alterations in DNA binding sequence. Importantly, both Langmuir and random sequential adsorption models yield insights into the thermodynamics of deposition but cannot fully explain particle coverage as a function of all relevant variables, indicating that the particle deposition mechanism for DNA-grafted colloids is more complex than prior adsorption phenomena. Here, it is shown that these deviations from standard behavior arise from the fact that each nanoparticle is attached to the surface via multiple weak DNA duplex interactions, enabling diffusion of adsorbed colloids across the substrate. Thus, surface migration of individual particles causes reorganization of the deposited monolayer, leading to the unusual behavior of coverage increasing at elevated temperatures that are just below the particle desorption temperature. The programmability of DNA-directed particle deposition therefore allows for precise control over the morphology of monolayer films, as well as the ability to generate crystalline materials with controllable surface roughness and grain size through layer-by-layer growth. As a result, the increased control over thin film morphology potentially enables tailoring of mechanical and optical properties and holds promise for use in a variety of applications.

59 BASIC BIOLOGICAL SCIENCES↗