Search NASA⌕ Search

SEARCH · Search NASA

Results for “time shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Time and temperature dependent modulus of pyrrone and polyimide moldings

A method is presented by which the modulus obtained from a stress relaxation test can be used to estimate the modulus which would be obtained from a sonic vibration test. The method was applied to stress relaxation, sonic vibration, and high speed stress-strain data which was obtained on a flexible epoxy. The modulus as measured by the three test methods was identical for identical test times, and a change of test temperature was equivalent to a shift in the logarithmic time scale. An estimate was then made of the dynamic modulus of moldings of two Pyrrones and two polyimides, using stress relaxation data and the method of analysis which was developed for the epoxy. Over the common temperature range (350 to 500 K) in which data from both types of tests were available, the estimated dynamic modulus value differed by only a few percent from the measured value. As a result, it is concluded that, over the 500 to 700 K temperature range, the estimated dynamic modulus values are accurate.

Lander, L. L.↗

Small soil C cycle responses to three years of cover crops in maize cropping systems

Cover crops are touted for their ability to improve many ecosystem functions in annual cropping systems. In addition to water and nutrient retention, cover crops may influence C cycling by increasing total C inputs to the agroecosystem, stimulating microbial populations, altering main crop residue decomposition rate, or changing litter chemistry over time. We assessed whether annual (rye) or perennial (bluegrass) cover crops in maize cropping systems influenced maize residue decomposition (litterbags) or microbial communities (shotgun metagenomics) in soil and litter, and whether these cover crops had an effect on microbially active pools of C: particulate organic matter (POM) C and N, or potentially mineralizable C (PMC) after three years of cover crops. Neither cover crop affected litterbag decay rates or microbial composition relative to no cover crop controls. However, both cover crop types increased PMC indicating that microbially-available C was boosted by cover crops. Total POM and POM-N were higher with bluegrass cover crops. These modest effects of cover crops on dynamic soil C pools suggest the generally positive long-term effects of cover crops on soil protection and nutrient retention are related to incremental shifts in quantity, timing and quality of C inputs.

54 ENVIRONMENTAL SCIENCES↗

Testing the contribution of dispersal to microbial succession following a wildfire

ABSTRACT Given increased wildfire activity, there is growing interest in understanding the drivers of microbial succession after fire. Dispersal may be especially important to post-fire succession as biotic communities can be more susceptible to invasion following a disturbance. Here, we experimentally manipulated dispersal into disturbed leaf litter communities collected following a wildfire and tracked bacterial and fungal dispersal assemblages over time. We show that the identity and source of microbes immigrating into the soil surface post-fire change across time with seasonal shifts and the reemergence of aboveground vegetation. Further, dispersal significantly contributed to the reassembly of leaf litter microbial communities after the fire, producing an increasingly distinct assembly trajectory. The effect of dispersal on α-diversity and β-diversity was ecosystem dependent but, unexpectedly, influenced bacterial and fungal communities in a similar manner within ecosystems. Collectively, these results demonstrate that dispersal explicitly alters the course of microbial community succession following a wildfire and may impact bacteria and fungi in parallel ways, despite differing in traits expected to alter dispersal patterns. IMPORTANCE Identifying the mechanisms underlying microbial community succession is necessary for predicting how microbial communities, and their functioning, will respond to future environmental change. Dispersal is one mechanism expected to affect microbial succession, yet the difficult nature of manipulating microorganisms in the environment has limited our understanding of its contribution. Using a dispersal exclusion experiment, this study isolates the specific effect of environmental dispersal on bacterial and fungal community assembly over time following a wildfire. The work demonstrates the potential to quantify dispersal impacts on soil microbial communities over time and test how dispersal might further interact with other assembly processes in response to environmental change.

59 BASIC BIOLOGICAL SCIENCES↗

Rewarding Grid-Friendly Behavior: Estimating the Potential Bill Reduction and Load Shifting Benefits of Dynamic Prices

Shifting electric load from times of peak demand can be a key strategy to slow price growth as reducing peak demand avoids the cost of upgrading generation, transmission and distribution infrastructure. Utilities are releasing time-varying prices, such as time of use rates or dynamic prices, to incentivize grid-friendly load shifting. New dynamic price programs provide insight into the true cost of operating electricity grids and the potential economic benefits of load shifting. Program developers and device manufacturers need to understand the economic opportunities in terms of 1) the variation in prices across hours, days, and seasons; 2) the change in utility bills for customers who don’t shift load; and 3) the potential load shifted and economic value of different technologies if manufacturers or aggregators deploy price-responsive controls. This paper estimates possible impacts of dynamic price adoption and load shifting controls if customers paid the dynamic rate from one pilot program. Statistical analysis of historical prices identified annual and seasonal metrics as well as representative price curves for each circuit in the pilot. Simulations for residential technologies with price-responsive controls including unitary heat pump water heaters, central multifamily heat pump water heaters, heating & cooling + storage systems, and pool pumps estimated the potential impacts of highly dynamic prices both with and without load shifting controls. Results showed the potential to reduce electricity costs on representative days by 42-94% and reduce consumption during times of high electricity prices by 63-100% compared to baseline operation for those flex-friendly devices.

Grant, Peter↗

Multiple Indicators of Extreme Changes in Snow-Dominated Streamflow Regimes, Yakima River Basin Region, USA

Snow plays a major role in the hydrological cycle. Variations in snow duration and timing can have a negative impact on water resources. Excluding predicted changes in snowmelt rates and amounts could result in deleterious infrastructure, military mission, and asset impacts at military bases across the US. A change in snowpack can also lead to water shortages, which in turn can affect the availability of irrigation water. We performed trend analyses of air temperature, snow water equivalent (SWE) at 22 SNOTEL stations, and streamflow extremes for selected rivers in the snow-dependent and heavily irrigated Yakima River Basin (YRB) located in the Pacific Northwest US. There was a clear trend of increasing air temperature in this study area over a 30 year period (water years 1991–2020). All stations indicated an increase in average air temperatures for December (0.97 °C/decade) and January (1.12 °C/decade). There was also an upward trend at most stations in February (0.28 °C/decade). In December–February, the average air temperatures were 0.82 °C/decade. From these trends, we estimate that, by 2060, the average air temperatures for December–February at most (82%) stations will be above freezing. Furthermore, analysis of SWE from selected SNOTEL stations indicated a decreasing trend in historical SWE, and a shift to an earlier peak SWE was also assumed to be occurring due of the shorter snow duration. Decreasing trends in snow duration, rain-on-snow, and snowmelt runoff also resulted from snow modeling simulations of the YRB and the nearby area. We also observed a shift in the timing of snowmelt-driven peak streamflow, as well as a statistically significant increase in winter maximum streamflow and decrease in summer maximum and minimum streamflow trends by 2099. From the streamflow trends and complementary GEV analysis, we show that the YRB basin is a system in transition with earlier peak flows, lower snow-driven maximum streamflow, and higher rainfall-driven summer streamflow. This study highlights the importance of looking at changes in snow across multiple indicators to develop future infrastructure and planning tools to better adapt and mitigate changes in extreme events.

54 ENVIRONMENTAL SCIENCES↗

Tracing the mass growth and star formation rate evolution of massive galaxies from Z ∼ 6 to Z ∼ 1 in the Hubble ultra-deep field

We present an analysis of an H {sub 160}-selected photometric catalog of galaxies in the Hubble Ultra-Deep Field, using imaging from the WFC3/IR camera on the Hubble Space Telescope in combination with archival ultraviolet, optical, and near-infrared imaging. Using these data, we measure the spectral energy distributions of ∼1500 galaxies to a limiting H {sub 160} magnitude of 27.8, from which we fit photometric redshifts and stellar population estimates for all galaxies with well-determined Spitzer IRAC fluxes, allowing for the determination of the cumulative mass function within the range 1 < z < 6. By selecting samples of galaxies at a constant cumulative number density, we are able to explore the coevolution of stellar masses and star formation rates (SFRs) for progenitor galaxies and their descendants from z ∼ 6. We find a steady increase in the SFRs of galaxies at constant number density from z ∼ 6 to z ∼ 3, accompanied by gradually declining specific star formation rates (sSFRs) during this same period. The peak epoch of star formation is also found to shift to later times for galaxies with increasing number densities, in agreement with the expectations from cosmic downsizing. The observed SFRs can fully account for the mass growth to z ∼ 2 among galaxies with cumulative number densities greater than 10{sup –3.5} Mpc{sup –3}. For galaxies with a lower constant number density (higher mean mass), we find the observed stellar masses are ∼three times greater than that which may be accounted for by the observed star formation alone at late times, implying that growth from mergers plays an important role at z < 2. We additionally observe a decreasing sSFR, equivalent to approximately one order of magnitude, from z ∼ 6 to z ∼ 2 among galaxies with number densities less than 10{sup –3.5} Mpc{sup –3}, along with significant evidence that at any redshift the sSFR is higher for galaxies at higher number density. The combination of these findings can qualitatively explain the previous findings of a specific star formation rate plateau at high redshift. Tracing the evolution of the fraction of quiescent galaxies for samples matched in cumulative number density over this redshift range, we find no unambiguous examples of quiescent galaxies at z > 4.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamical manifestation of an evolving Berry phase as a frequency shift of the resonance transition between two eigenstates

We investigate the phenomenon that a Berry phase evolving linearly in time induces a frequency shift of the resonance transition between two eigenstates, regardless of whether or not they are superposed. Using the magnetic-field-insensitive two-photon microwave--radio-frequency transition, which is free of any other dynamical frequency shift, we demonstrate that the frequency shift caused by a uniform rotation of the magnetic field corresponds to the derivative of the Berry phase with respect to time and depends on the direction of rotation of the magnetic field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identifying isotropic events using a regional moment tensor inversion

We calculate the deviatoric and isotropic source components for 17 explosions at the Nevada Test Site, as well as 12 earthquakes and 3 collapses in the surrounding region of the western United States, using a regional time domain full waveform inversion for the complete moment tensor. The events separate into specific populations according to their deviation from a pure double-couple and ratio of isotropic to deviatoric energy. The separation allows for anomalous event identification and discrimination between explosions, earthquakes, and collapses. Confidence regions of the model parameters are estimated from the data misfit by assuming normally distributed parameter values. We investigate the sensitivity of the resolved parameters of an explosion to imperfect Earth models, inaccurate event depths, and data with low signal-to-noise ratio (SNR) assuming a reasonable azimuthal distribution of stations. In the band of interest (0.02–0.10 Hz) the source-type calculated from complete moment tensor inversion is insensitive to velocity model perturbations that cause less than a half-cycle shift (<5 s) in arrival time error if shifting of the waveforms is allowed. The explosion source-type is insensitive to an incorrect depth assumption (for a true depth of 1 km), and the goodness of fit of the inversion result cannot be used to resolve the true depth of the explosion. Noise degrades the explosive character of the result, and a good fit and accurate result are obtained when the signal-to-noise ratio is greater than 5. We assess the depth and frequency dependence upon the resolved explosive moment. As the depth decreases from 1 km to 200 m, the isotropic moment is no longer accurately resolved and is in error between 50 and 200%. Furthermore, even at the most shallow depth the resultant moment tensor is dominated by the explosive component when the data have a good SNR.

58 GEOSCIENCES↗

Calibration of CDM-Based Creep Constitutive Model Using Accelerated Creep Test (ACT) Data

In conventional creep testing (CCT) a specimen is subject to constant load and temperature for a long-duration until creep rupture occurs. Conventional testing can be costly when considering the number of experiments needed to characterize the creep response of a material over a range of stress and temperature. To predict long-term creep-rupture properties, the time-temperature-stress superposition principle (TTSSP) approach has been employed where stress and/or temperature is applied at an elevated level; the result of which are extrapolated down to low stress and/or temperature conditions. These methods have been successful in predicting minimum-creep-strain-rate (MCSR) and stress-rupture (SR) but suffer from an inability to predict the creep deformation curve or account for changes in deformation mechanisms or aging that occurs at long-duration. An accelerated technique, termed the Stepped isostress method (SSM) allows the accelerated testing of materials to determine their creep deformation response. Unlike TTSSP tests, the SSM test employs a single specimen where the stress is periodically step increased until rupture. The SSM creep deformation curve is processed (time and strain shifted) to produce an accelerated creep deformation curve that represent the creep deformation curve at the initial stress level in SSM. A processing procedure for metals has yet to be developed. The research objective of this study is to develop a processing procedure for SSM test data using a creep-damage constitutive model. Triplicate SSM tests were conducted on Ni-based superalloy Inconel 718 at 650°C with stress being periodically increased until rupture. Triplicate CCT tests were conducted at the initial stress level of the SSM tests. The Sine-hyperbolic (Sinh) creep-damage model was employed in this study. The Sinh creep-damage constitutive model is based on coupled creep strain rate and damage evolution equations; where both rates are dependent on the current state of damage. Calibration is two-step: analytical and numerical optimization. Each stepped creep deformation curve is tackled quasi-analytically to determine MCSR and SR related material constants and accumulated damage. The damage accumulated at the end of each step was then passed onto subsequent steps to calibrate the MCSR, rupture prediction, and damage evolution. Numerical optimization was applied to optimize model constants involved in the creep strain constitutive equations in order to generate best-fitted Sinh creep deformation curves. The Sinh model predictions were compared to the SSM and CCT data. The Sinh model satisfactorily predicts the SSM data and thus the calibrated material constants provides a good estimate of rupture found in the CCT data. Calibration using SSM data reduces the number of tests needed to calibrate a model; significantly reducing costs. A single SSM test replaces numerous creep tests at different stresses.

36 MATERIALS SCIENCE↗

Techno-economic analysis of the use of atomic layer deposited transition metal oxides in silicon heterojunction solar cells

The industry for producing silicon solar cells and modules has grown remarkably over the past decades, with more than a 100-fold reduction in price over the past 45?years. The main solar cell fabrication technology has shifted over that time and is currently dominated by the passivated emitter and rear cell (PERC). Other technologies are expected to increase in market share, including tunnel-oxide passivated contact (TOPCon) and heterojunction technology (HJT). In this paper, we examine the cost potential for using atomic layer deposition (ALD) to form transition metal oxide (TMO) layers (MoO x , TiO x and aluminium-doped zinc oxide [AZO]) to use as lower cost alternatives of the p-doped, n-doped and indium tin oxide (ITO) layers, respectively, the layers normally used in HJT solar cells. Using a bottom-up cost and uncertainty model with equipment cost data and process experience in the lab, we find that the production cost of these variations will likely be lower per wafer than standard HJT, with the main cost drivers being the cost of the ALD precursors at high-volume production. We then considered what efficiency is required for these sequences to be cost effective in $/W and discuss whether these targets are technically feasible. This work motivates further work in developing these ALD TMO processes to increase their efficiency towards their theoretical limits to take advantage of the processing cost advantage.

14 SOLAR ENERGY↗

An efficient cost reduction procedure for bounded-control LQR problems

A novel approach has been developed for approximating the solution to the constrained LQR problem, based on updating the final state and costate of a related regular problem, and on slightly shifting the switching times (the instants when the control meets the constraints). The main result is the expression of a suboptimal control in feedback form using the solution of some compatible Riccati equation. The gradient method is applied to reduce the cost via explicit algebraic formula for its partial derivatives with respect to the hidden final state/costate of the related regular problem and to the switching times. The numerical method is termed efficient because it does not involve integrations of states or cost trajectories, and reduces to its minimum the dimension of the unknown parameters at the final condition. All the relevant objects are calculated from a few auxiliary matrices, which are computed only once. The scheme is here applied to two case studies whose optimal solutions are known. The first example is a two-dimensional model of the ‘cheapest stop of a train’ problem. The second one refers to the temperature control of a metallic strip leaving a multi-stand rolling mill, a problem with a high-dimensional state.

97 MATHEMATICS AND COMPUTING↗

Regional hydrologic response to climate change in the conterminous United States using high-resolution hydroclimate simulations

Despite the fact that Global Climate Model (GCM) outputs have been used to project hydrologic impacts of climate change using off-line hydrologic models for two decades, many of these efforts have been disjointed applications or at least calibrations have been focused on individual river basins and using a few of the available GCMs. This study improves upon earlier attempts by systematically projecting hydrologic impacts for the entire conterminous United States (US), using outputs from ten GCMs from the latest Coupled Model Intercomparison Project phase 5 (CMIP5) archive, with seamless hydrologic model calibration and validation techniques to produce a spatially and temporally consistent set of current hydrologic projections. The Variable Infiltration Capacity (VIC) model was forced with ten-member ensemble projections of precipitation and air temperature that were dynamically downscaled using a regional climate model (RegCM4) and bias-corrected to 1/24 (~4 km) grid resolution for the baseline (1966 2005) and future (2011 2050) periods under the Representative Concentration Pathway 8.5. Based on regional analysis, the VIC model projections indicate an increase in winter and spring total runoff due to increases in winter precipitation of up to 20% in most regions of the US. However, decreases in snow water equivalent (SWE) and snow-covered days will lead to significant decreases in summer runoff with more pronounced shifts in the time of occurrence of annual peak runoff projected over the eastern and western US. In contrast, the central US will experience year-round increases in total runoff, mostly associated with increases in both extreme high and low runoff. Furthermore, the projected hydrological changes described in this study have implications for various aspects of future water resource management, including water supply, flood and drought preparation, and reservoir operation.

54 ENVIRONMENTAL SCIENCES↗

Emergence of Orchestrated and Dynamic Metabolism of Saccharomyces cerevisiae

Microbial metabolism is a fundamental cellular process that involves many biochemical events and is distinguished by its emergent properties. While the molecular details of individual reactions have been increasingly elucidated, it is not well understood how these reactions are quantitatively orchestrated to produce collective cellular behaviors. Here we developed a coarse-grained, systems, and dynamic mathematical framework, which integrates metabolic reactions with signal transduction and gene regulation to dissect the emergent metabolic traits of Saccharomyces cerevisiae. Our framework mechanistically captures a set of characteristic cellular behaviors, including the Crabtree effect, diauxic shift, diauxic lag time, and differential growth under nutrient-altered environments. It also allows modular expansion for zooming in on specific pathways for detailed metabolic profiles. Furthermore, this study provides a systems mathematical framework for yeast metabolic behaviors, providing insights into yeast physiology and metabolic engineering.

59 BASIC BIOLOGICAL SCIENCES↗

Modeling the effects of changes in new source review on national SO{sub 2} and NOx emissions from electricity-generating units

The Clean Air Act establishes New Source Review (NSR) programs that apply to construction or modification of major stationary sources. In 2002 and 2003, EPA revised its rules to narrow NSR's coverage of renovations. Congress mandated a National Research Council study of the revisions' impacts. In that study, we used an electricity-sector model to explore possible effects of the equipment replacement provision (ERP), the principal NSR change directed at power plants. We find that, assuming implementation of the Clean Air Interstate Rule (CAIR), tight enforcement of the prerevision NSR rules would likely lead to no or limited decreases in national emissions compared to policies such as ERP. However, emissions might shift forward in time because the previous NSR rules would depress allowance prices, discouraging banking and encouraging allowance use. Only under the most aggressive prerevision NSR enforcement scenario, in which essentially all coal capacity is compelled to retrofit controls by 2020, do NOx emissions fall below ERP levels. Even then, total 2007-2020 SO{sub 2} emissions are unaffected. Further decreases in national emissions could be accomplished more cheaply by tighter emissions caps than through NSR because caps provide incentives for efficient operating strategies, such as fuel switching, as well as retrofits. 23 refs., 2 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Interactions of Oxide Surfaces with Water Revealed with Solid-State NMR Spectroscopy

Hydrous materials are ubiquitous in the natural environment and efforts have previously been made to investigate the structures and dynamics of hydrated surfaces for their key roles in various chemical and physical applications, with the help of theoretical modeling and microscopy techniques. However, an overall atomic-scale understanding of the water–solid interface, including the effect of water on surface ions, is still lacking. Herein, we employ ceria nanorods with different amounts of water as an example and demonstrate a new approach to explore the water–surface interactions by using solid-state NMR in combination with density functional theory. NMR shifts and relaxation time analysis provide detailed information on the local structure of oxygen ions and the nature of water motion on the surface: the amount of molecularly adsorbed water decreases rapidly with increasing temperature (from room temperature to 150 °C), whereas hydroxyl groups are stable up to 150 °C, and dynamic water molecules are found to instantaneously coordinate to the surface oxygen ions. Additionally, the applicability of dynamic nuclear polarization for selective detection of surface oxygen species is also compared to conventional NMR with surface selective isotopic-labeling: the optimal method depends on the feasibility of enrichment and the concentration of protons in the sample. These results provide new insight into the interfacial structure of hydrated oxide nanostructures, which is important to improve performance for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge Localization after Ultrafast Photoexcitation of a Rigid Perylene Perylenediimide Dyad Visualized by Transient Stark Effect

The intramolecular charge transfer (CT) dynamics of a rigid and strongly conjugated perylenediimide-bridge-perylene dyad (PDIPe) has been explored in dichloromethane using ultrafast transient electronic absorption spectroscopy and quantum chemical calculations. The strong electronic coupling between the dyad units gives rise to a CT band. Its photoexcitation forms a delocalized CT state with well-preserved ion bands despite the strong coupling. In the dyad, the electronic transition dipole moment of the electron donor perylene is aligned along the axis of the electric field vector with respect to the CT species. This alignment makes the donor sensitive to the Stark effect and thus charge density fluctuations in the CT state. Charge localization on the picosecond time scale manifests as a time-dependent Stark shift in the visible region. Quantum chemical calculations reveal a twist around the acetylene bridging unit to be the responsible mechanism generating a partial to an almost complete CT state. An estimate of the electric field strength in the CT state yields approximately 25 MV/cm, which increases to around 31 MV/cm during charge localization. Additionally, the calculations illustrate the complexity of electronic structure in this strongly delocalized superchromophore and reflect the complications in the interpretation of transient absorption results when compared to steady-state approaches such as spectroelectrochemistry and model chromophore experiments such as photoinduced bimolecular charge transfer.

14 SOLAR ENERGY↗

The Effects of Climate Change on Interregional Electricity Market Dynamics on the U.S. West Coast

The United States (U.S.) West Coast power system is strongly influenced by variability and extremes in air temperatures (which drive electricity demand) and streamflows (which constrain hydropower production). As hydroclimate changes across the West Coast, a combination of forces may work in tandem to make its bulk power system more vulnerable to physical reliability issues and market price shocks. In particular, a warmer climate is expected to increase summer cooling (electricity) demands and shift the average timing of peak streamflow (hydropower production) away from summer to the spring and winter, depriving power systems of hydropower when it is needed the most. Here, we investigate how climate change could alter interregional electricity market dynamics on the West Coast, including the potential for hydroclimatic changes in one region (e.g. Pacific Northwest (PNW)) to “spill over” and cause price and reliability risks in another (e.g. California). We find that the most salient hydroclimatic risks for the PNW power system are changes in streamflow, while risks for the California system are driven primarily by changes in summer air temperatures, especially extreme heat events that increase peak system demand. Altered timing and amounts of hydropower production in the PNW do alter summer power deliveries into California but show relatively modest potential to impact prices and reliability there. Instead, it is future climate conditions (extreme heat) in California that may exert a stronger significant influence on prices and reliability in the PNW, especially if California continues to rely on its northern neighbor for imported power to meet higher summer demands.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Intrinsic nonlinearities in the mechanics of hard sphere suspensions

The onset of nonlinear responses in near hard sphere suspensions is characterized as a function of oscillatory frequency and strain amplitude. At low frequencies where the viscous behavior dominates, the onset of nonlinearities is driven by increases in rate of strain. At high deformation frequency, where suspension mechanics is dominated by an elastic response, the nonlinear responses occur when deformation exceeds a characteristic strain. This strain is associated with the transient confinement of particles by nearest neighbors and its volume fraction dependence is through cage parameters derived from the high frequency elastic modulus. Furthermore, the onset of nonlinear responses takes on a universal behavior when deformation frequency is normalized by the characteristic time governing the shift from viscous to elastic behavior indicating that this transition is associated with transient particle localization and is expected to be observed for all volume fractions where pair interactions are important.

36 MATERIALS SCIENCE↗