Search NASA⌕ Search

SEARCH · Search NASA

Results for “tracking data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Results of the 3 November 1974 Applications Technology Satellite-6 (ATS-6) trilateration test

The highly successful 24 hour trilateration tracking and orbit determination test conducted on 3 November 1974 is described. In this test a new method of accurately computing geostationary spacecraft orbits was applied to the Applications Technology Satellite (ats-6). A single tracking station interrogates several strategically deployed ground based transponders via the synchronous satellite whose orbit is to be determined. The ATS-6 tracking data measurement noise over the 24 hour period was observed to be 0.3 mm/sec in range rate and 1.5 meters in range. By means of overlap orbit computation using 2 separate tracking data bases, the ATS-6 total position and velocity uncertainties were determined to reach a minimum of 30 meters and 0.2 cm/sec respectively. The maximum position and velocity uncertainty over this same time period was determined to be approximately 250 meters and 2 cm/sec respectively. A position determination using simultaneous tracking of the NASA-GSFC site by ATS-6 and ATS-3 was also performed. Station location recovery was to an accuracy on the order of 100 meters over the first 10 hours of tracking.

Schmid, P. E.↗

Evidence for a Low Bulk Crustal Density for Mars from Gravity and Topography

Knowledge of the average density of the crust of a planet is important in determining its interior structure. The combination of high-resolution gravity and topography data has yielded a low density for the Moon’s crust, yet for other terrestrial planets the resolution of the gravity field models has hampered reasonable estimates. By using well-chosen constraints derived from topography during gravity field model determination using satellite tracking data, we show that we can robustly and independently determine the average bulk crustal density directly from the tracking data, using the admittance between topography and imperfect gravity. We find a low average bulk crustal density for Mars, 2582 ± 209 kgm−3. This bulk crustal density is lower than that assumed until now. Densities for volcanic complexes are higher, consistent with earlier estimates, implying large lateral variations in crustal density. In addition, we find indications that the crustal density increases with depth.

Goossens, Sander J.↗

Results of GEOS 3/ATS 6 satellite-to-satellite tracking orbit determination experiment

The purpose of the Geos 3/ATS 6 satellite-to-satellite tracking experiment was to develop, test, and evaluate methods of deriving orbit estimates from satellite-to-satellite tracking data. The results of the form of conventional orbit overlap tests, and a comparison of a Geos 3 orbit estimate obtained from satellite-to-satellite (SST) tracking data with an orbit estimate derived form C-band data. The method recommeded for estimating orbits from SST data is a Bayesian least squares procedure utilizing independent ranging to the relay satellite.

Argentiero, P.↗

Mars gravity field error analysis from simulated radio tracking of Mars Observer

Results are presented on the analysis of the recovery of the Martian gravity field from tracking data in the presence of unmodeled error effects associated with different orbit orientations. The analysis was based on the mission plan for the Mars Observer (MO) radio tracking data from the Deep Space Network. From the analysis, a conservative estimate of the gravitational accuracy for the entire mission could be obtained. The results suggest that, because the atmospheric drag is the dominant error source, the spacecraft orbit could possibly be raised in altitude without a significant loss of gravitational signal. A change in altitude will also alleviate the large effects seen in the spectrum the satellite resonant orders.

Smith, D. E.↗

Avian Radar / Processed Data

This dataset contains radar track data of avian targets from DeTect's 7360 s-band radar during the large barge deployment from June 2024 though September 2024.

17 WIND ENERGY↗

Mean gravity anomalies from a combination of Apollo/ATS 6 and GEOS 3/ATS 6 SST tracking campaigns

Advances in satellite tracking data accuracy and coverage over the past 15 years have led to major improvements in global geopotential models. But the spacial resolution of the gravity field obtained solely from satellite dynamics sensed by tracking data is still of the order of 1000 km. Attention is given to an approach which will provide information regarding the fine structure of the gravity field on the basis of an application of local corrections to the global field. According to this approach, a basic satellite to satellite tracked (SST) range-rate measurement is constructed from the link between a ground station, a geosynchronous satellite (ATS 6), and a near-earth satellite (Apollo or GEOS 3). Attention is given to a mathematical model, the simulation of SST gravity anomaly estimation accuracies, a gravity anomaly estimation from GEOS 3/ATS 6 and Apollo/ATS 6 SST observations, and an evaluation of the mean gravity anomalies determined from SST.

Kahn, W. D.↗

GMM-1: A 50 degree and order gravitational field model for Mars

Knowledge of the gravitational field, in combination with surface topography, provides one of the principal means of inferring the internal structure of a planetary body. The highest resolution gravitational field for Mars published thus far was derived from Doppler tracking data from the Mariner 9 and Viking 1 and 2 spacecraft and is complete to degree and order 18 corresponding to a half wavelength resolution of approximately 600 km. This field, which is characterized by a spatial resolution that is slightly better than that of the highest resolution (16x16) topographic model, has been utilized extensively in analyses of the state of stress and isostatic compensation of the Martian lithosphere. However, the resolution and quality of current gravity and topographic fields are such that the origin and evolution of even the major physiographic features on Mars, such as the hemispheric dichotomy and Tharsis rise, are not well understood. We have re-analyzed the Viking and Mariner data sets and have derived a new gravitational field, which we designated GMM-1 (Goddard Mars Model-1). This model is complete to spherical harmonic degree and order 50 with a corresponding (half wavelength) spatial resolution of 200-300 km where the data permit. In contrast to previous models, GMM-1 was solved to as high degree and order as necessary to nearly exhaust the attenuated gravitational signal contained in the tracking data.

Smith, D. E.↗

Deep Space navigation for the BioSentinel spacecraft science orbit

BioSentinel is an astrobiology small spacecraft mission. The payload consists of two parts, the first has optical and microfluidics sensors, and the second is a Linear Energy Transfer spectrometer that has the objective to measure deep space radiation from events such as coronal mass ejections. The goal of the mission is to observe potential DNA damage due to the radiation in heliocentric space on the living organism Saccharomyces cerevisiae, which is a budding yeast. Two types of this living organism are included in the payload. The first is a natural type that is more radiation tolerant, while the second is a mutant strain that has a deficiency in a gene that allows DNA repair once damage occurs. The impact caused by the radiation on the DNA is compared to an identical sample aboard the International Space Station, as well as another identical sample at a laboratory on the ground. The BioSentinel mission consists of a 6U CubeSat currently ,as of January 2024, active in heliocentric orbit. The spacecraft was launched aboard the first SLS flight as part of the Artemis-I campaign in November 2022. After successful deployment from the launch vehicle, it performed a lunar flyby with an altitude of 406 km. The delta-V imparted by the flyby provided the necessary energy to achieve a heliocentric orbit, in an Earth-trailing pattern. The navigation analysis consisted of a Kalman-filter that utilized data from the Deep Space Network and the ESA Estrack network. All those antennas were needed since the Artemis-1 campaign included the deployment of several other cubesats, therefore the scheduling process required more antenna assets than usual due to simultaneous demands from various missions. The processed tracking data was later also refined with a smoother in order to obtain a more accurate solution. The type of tracking data included TCP, Sequential Range, Doppler and Range formats. The solar radiation pressure coefficient, as well as the delta-V from the deployment and the flyby were modeled to obtain suitable solutions that could decrease the position and velocity uncertainties at several steps along the mission concept of operations. The final product each time resulted in updated ephemeris files that were used by the mission and the antenna networks as the mission progressed. Once in the final science orbit, the utilized antennas are only from the DSN network and the data format is bounded to just TCP. Regular orbit determination is performed, every two weeks. The spacecraft is in a nominal well-known orbit, performing regular operations. This paper includes an analysis of the final science orbit, the techniques and procedures utilized to perform orbit determination and a description of the overall navigation campaign produced during the mission and, more specifically, during the final science operations in Deep Space.

BioSentinel↗

Planetary geodesy

The results of investigations of the geodesy of the planets and their satellites conducted during the period 1975 - 1978 are surveyed. Analysis of the photographic data of Mercury taken by Mariner 10 have revealed the mass, oblateness, radius rotation period and density of the panet, and allowed the high-resolution mapping of the surface. Earth-based radar imagery has permitted the identification of large-scale topographic features on Venus. Knowledge of the gravitational field of Mars has been improved by Mariner 9 and Viking tracking data, and the global topography and geometric figure of Mars have been derived. Doppler and ranging tracking data from the Viking landers have provided data for the precise determination of Martian rotational dynamics and the topographic features and figures of Phobos and Deimos have been observed. Pioneer 10 and 11 data have yielded information on the mass, gravitational field and dynamic parameters of Jupiter. Discoveries of a satellite of Pluto and a set of rings around Uranus have been made, the rotation of Uranus and Neptune have been measured, and the geodetic properties of the rings and satellites of Saturn have been investigated. Future developments in planetary geodesy are expected from continued Viking data and the Pioneer Venus probe and Voyager probes to Jupiter and Saturn.

Michael, W. H., Jr.↗

Contrail Tracking and ARM Data Product Development

A contrail tracking system was developed to help in the assessment of the effect of commercial jet contrails on the Earth's radiative budget. The tracking system was built by combining meteorological data from the Rapid Update Cycle (RUC) numerical weather prediction model with commercial air traffic flight track data and satellite imagery. A statistical contrail-forecasting model was created a combination of surface-based contrail observations and numerical weather analyses and forecasts. This model allows predictions of widespread contrail occurrences for contrail research on either a real-time basis or for long-term time scales. Satellite-derived cirrus cloud properties in polluted and unpolluted regions were compared to determine the impact of air traffic on cirrus.

Duda, David P.↗

James Webb Space Telescope Navigation Optimization Challenges

The James Webb Space Telescope (JWST) is a NASA flagship mission launched on December 25, 2021. The early orbit phase was highlighted by three midcourse correction burns that were performed to maneuver the vehicle into a libration orbit at the second Sun-Earth-Moon (SEM) libration point (L2). During the coast to L2, the vehicle’s primary observatory and sunshield were deployed. Once the tennis-court-sized sunshield was unfurled and tensioned into place, the large area exposed to solar radiation pressure (SRP) dictated that the SRP force model would need to account for the vehicle’s geometry, reflective properties, and orientation relative to the Sun. Following the insertion of JWST into its L2 libration orbit on January 24, 2022, the commissioning phase for the vehicle’s observatory commenced along with the first cycle of routine station-keeping maneuvers. The NASA Goddard Space Flight Center’s Flight Dynamics Facility (FDF) provides navigation services for the JWST mission. The FDF serves as the prime or backup navigation operations center for more than 30 active missions spanning a wide array of flight regimes performing orbit determination, maneuver planning, trajectory optimization, and tracking data evaluation. Definitive orbit determination for JWST is performed by the FDF using an Extended Kalman Filter (EKF) to estimate the vehicle’s trajectory and reflective properties using Deep Space Network (DSN) TRK-2-34 tracking data and spacecraft attitude telemetry. For the purposes of orbit prediction and station-keeping maneuver targeting, the sensitivity of the SRP force to the vehicle’s orientation requires that predictive attitude information must be incorporated to generate accurate orbit predictions and maneuver plans. Predictive attitude plans are provided to the FDF by the JWST Spacecraft Operations Center (SOC). Short-term (28 day) orbit predictions are propagated using a Short Range Attitude Plan (SRAP) to model the vehicle’s future attitude states for up to a week. SRAP attitude data is highly reliable, as it reflects finalized planned attitude states that the vehicle will be commanded to attain during the ensuing week. A Long Range Attitude Plan (LRAP) can be implemented to model predicted attitude states beyond one week, but these predictions are tentative and subject to revision due to changes in science operations plans. Instead, a conservative approach of applying a Sun-Pointing Neutral (SPN) attitude configuration is utilized for long-term (2 year) orbit predictions where reliable planned attitude data is not available. SPN attitude mode aligns the net SRP force along the JWST-to-Sun vector where it becomes independent of the vehicle’s angle of rotation about this vector, defined as the Sun yaw. Given the dynamic instability of the libration orbit, station-keeping thrust must be applied in either the sunward or anti-sunward direction to balance the resulting orbit. The attitude constraints of the vehicle also impose limits on the available pointing directions for station-keeping thrusters. The thrusters cannot be aligned with the optimal pointing direction for sunward maneuvers, rendering sunward maneuvers to be significantly less fuel efficient than anti-sunward maneuvers. Consequently, station-keeping maneuvers must be targeted to balance the orbit while ensuring that the next maneuver will also be performed in the anti-sunward direction to optimize propellant usage. When targeting a station-keeping maneuver, the attitude and SRP modeling configuration which is applied to the predicted post-maneuver trajectory will dictate the direction of the subsequent station-keeping maneuver, assuming nominal propulsion system performance. If the predicted post-maneuver attitude states result in an SRP model which under-predicts the cumulative SRP impact on the post-maneuver orbit, a targeted anti-sunward maneuver will be larger than necessary and the next maneuver will need to be executed sunward in order to compensate. In contrast, an anti-sunward maneuver which is targeted using an SRP model which over-predicts the cumulative SRP impact will achieve station-keeping while ensuring that the next maneuver will likewise be performed anti-sunward. For this reason, station-keeping maneuvers are targeted while applying the SPN attitude mode, as this mode entails the largest possible SRP area cross-section and therefore a larger modeled cumulative SRP impact. This paper documents the NASA Goddard Space Flight Center’s FDF support for JWST on-orbit operations and the analysis projects undertaken utilizing the experiences and data accumulated throughout the first full year of routine science operations. The results of these analysis efforts have been used to implement improvements to orbit prediction accuracy and maneuver efficiency which have the potential to prolong the lifespan of JWST to continue to conduct ground-breaking infrared astronomy for decades to come.

Flight Dynamics↗

Navigation Using Deep-Space Optical Communication Systems

This work investigates the deep-space spacecraft navigation performance achievable from tracking data types obtained using optical communication systems. These optical navigation types include ranging between spacecraft and a station on Earth and astrometric measurements of angular position. Two mission scenarios are analyzed: an interplanetary cruise trajectory for a Mars lander (Mars 2020), and a science orbit for a Mars orbiter (MAVEN). Various data types are simulated using comprehensive measurement models, tracking schedules, and geometrical constraints. Sensitivity analyses are performed to assess the effect of various contributors to measurement accuracy and navigation performance. For both of the mission scenarios studied, the optical navigation types yield equivalent or improved performance as compared to traditional radiometric observables, though radiometric data types slightly outperform optical observables during tracking data gaps in the science orbit scenario.

McCandless, Sarah Elizabeth↗

The Integration of Geographical Information System and Remotely Sensed Data to Track and Predict the Migration Path of the Africanized Honey Bee

One of the research groups at the Pan American Center for Earth and Environmental Studies (PACES) is researching the northward migration path of Africanized Honey Bees or often referred to in the popular press as killer bees. The goal of the Killer Bee Research Group (KBRG) is to set up a database in the form of a geographical information system, which will be used to track and predict the bees future migration path. Included in this paper is background information on geographical information systems, the SPANS Explorer software package which was used to implement the database, and Advanced Very High Resolution Radiometer data and how each of these is being incorporated in the research. With an accurate means of predicting future migration paths, the negative effects of the Africanized honey bees maybe reduced.

Ward, Charles↗

A fast-initializing digital equalizer with on-line tracking for data communications

A theory is developed for a digital equalizer for use in reducing intersymbol interference (ISI) on high speed data communications channels. The equalizer is initialized with a single isolated transmitter pulse, provided the signal-to-noise ratio (SNR) is not unusually low, then switches to a decision directed, on-line mode of operation that allows tracking of channel variations. Conditions for optimal tap-gain settings are obtained first for a transversal equalizer structure by using a mean squared error (MSE) criterion, a first order gradient algorithm to determine the adjustable equalizer tap-gains, and a sequence of isolated initializing pulses. Since the rate of tap-gain convergence depends on the eigenvalues of a channel output correlation matrix, convergence can be improved by making a linear transformation on to obtain a new correlation matrix.

Houts, R. C.↗

Improvement of the TOPEX and Jason Orbit Time Series: Precision Orbit Determination, Calibration, Validation and Improvement Through the Combined Reduction and Analysis of GPS, SLR, DORIS and Altimeter Data

Orbit error is a major component in the overall error budget of all altimeter satellite missions. Jason-I is no exception and a 1 cm radial orbit accuracy goal has been set, which represents a factor of two improvement over what is currently being achieved for TOPEX/Poseidon (TP). Our current analysis suggests this goal has been met and even improved upon, but the challenge is to be able to continually achieve this high accuracy, verify the performance and characterize and quantify the remaining errors over the lifetime of the mission. The computation, verification and error characterization of such high accuracy orbits requires the reduction and analysis of all available tracking data (GPS, SLR, DORIS and altimeter). Current analysis also indicates the history of TP orbits can be further improved employing new solution strategies developed and tested on Jason-I. Our research focuses on the calibration, validation and improvement of orbit accuracies using all available tracking data including altimetry. We will compute and distribute well centered Jason orbits with an accuracy of better than 1-cm in the radial component. In addition to the orbits themselves, a characterization of the orbit error will be distributed and accumulated as a time series of orbit performance metrics to track anomalies and trends. The long time series of orbit error characterization will enable a better understanding of the remaining orbit errors and its impact on the altimeter data analysis. As part of this research effort we are also significantly improving the current level of TP orbit accuracy, re-computing new high-accuracy TP orbits from the beginning of the TP mission and continuing into the future (as long as TP is healthy). Our funded research effort will result in a complete and consistent time series of improved orbits for both TP and Jason, significantly benefiting the long time series of altimeter data analysis and the TP/Jason dual mission. The resultant high accuracy orbits and the characterization of their error will allow further improvements to the accuracy and overall quality of the altimeter measurement time series making possible further strides in radar altimeter remote sensing.

Luthcke, Scott B.↗

GPS as an orbit determination subsystems

This paper evaluates the use of Global Positioning System (GPS) receivers as a primary source of tracking data for low-Earth orbit satellites. GPS data is an alternative to using range, azimuth, elevation, and range-rate (RAER) data from the Air Force Satellite Control Network antennas, the Space Ground Link System (SGLS). This evaluation is applicable to missions such as Skipper, a joint U.S. and Russian atmosphere research mission, that will rely on a GPS receiver as a primary tracking data source. The Detachment 2, Space and Missile Systems Center's Test Support Complex (TSC) conducted the evaluation based on receiver data from the Space Test Experiment Platform Mission O (STEP-O) and Advanced Photovoltaic and Electronics Experiments (APEX) satellites. The TSC performed orbit reconstruction and prediction on the STEP-0 and APEX vehicles using GPS receiver navigation solution data, SGLS RAER data, and SGLS anglesonly (azimuth and elevation) data. For the STEP-O case, the navigation solution based orbits proved to be more accurate than SGLS RAER based orbits. For the APEX case, navigation solution based orbits proved to be less accurate than SGLS RAER based orbits for orbit prediction, and results for orbit reconstruction were inconclusive due to the lack of a precise truth orbit. After evaluating several different GPS data processing methods, the TSC concluded that using GPS navigation solution data is a viable alternative to using SGLS RAER data.

Fennessey, Richard↗

Orbit determination for earth survey satellites

A technique is described for improving the positioning accuracy of earth survey satellites. Tracking data from Landsat-1, taken in contiguous spans equal in length to the repeat period of 18 days, have been reduced in a least-squares orbit-determination scheme to estimate two pairs of lumped resonance coefficients. Seven separate data spans yielded resonance coefficient pairs consistent to better than 10% of their values, based on the GEM-1 gravity model. Constraint equations were developed. The resonance terms were embedded in the GEM-8 gravity field to yield further improvements in orbital fit to the tracking data, and tests suggest a 20 m position capability for Landsat orbits when the resonance model is adopted. The lumped terms may be used to improve the perturbation model for all Landsat orbits, and the approach is applicable to the orbit of any satellite whose repeat period is long enough for geopotential resonance to have a significant effect on its motion.

Dunn, P. J.↗