Search NASA⌕ Search

SEARCH · Search NASA

Results for “unknowns”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Quantifying Background Magnetic Fields at Marine Energy Sites: Challenges and Recommendations

Unknowns around the environmental effects of marine renewable energy have slowed the deployment of this emerging technology worldwide. Established testing methods are necessary to safely permit and develop marine energy devices. Magnetic fields are one potential cause of environmental effects and are created when electricity is generated and transmitted to shore. Further, the existing variation of the background magnetic field at sites that may be developed for marine energy is largely unknown, making it difficult to assess how much additional stress or impact the anthropogenic magnetic field may have. This study investigates two instruments for their ability to characterize the background magnetic fields at a potential marine energy site in Sequim Bay, WA. Based on this evaluation, this study recommends an Overhauser magnetomer for assessing the background magnetic field and demonstrates the use of this sensor at a potential marine energy site.

47 OTHER INSTRUMENTATION↗

Sensitivity of Neutron-Rich Nuclear Isomer Behavior to Uncertainties in Direct Transitions

Nuclear isomers are populated in the rapid neutron capture process (r process) of nucleosynthesis. The r process may cover a wide range of temperatures, potentially starting from several tens of GK (several MeV) and then cooling as material is ejected from the event. As the r-process environment cools, isomers can freeze out of thermal equilibrium or be directly populated as astrophysically metastable isomers (astromers). Astromers can undergo reactions and decays at rates very different from the ground state, so they may need to be treated independently in nucleosythesis simulations. Two key behaviors of astromers—ground state ↔ isomer transition rates and thermalization temperatures—are determined by direct transition rates between pairs of nuclear states. We perform a sensitivity study to constrain the effects of unknown transitions on astromer behavior. Detailed balance ensures that ground → isomer and isomer → ground transitions are symmetric, so unknown transitions are equally impactful in both directions. We also introduce a categorization of astromers that describes their potential effects in hot environments. We provide a table of neutron-rich isomers that includes the astromer type, thermalization temperature, and key unmeasured transition rates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Searching for Pairs of Higgs Bosons in the LHC Run 2 Dataset

The discovery of the Higgs boson confirms the existence of a scalar sector of the standard model, responsible for electroweak symmetry breaking, but the nature and properties of the potential at the origin of this mechanism are still unknown. By studying the production of pairs of Higgs bosons (HH), physicists can directly measure the coupling of the Higgs boson to itself and thus determine the shape of this potential, which has far-reaching implications on the origin and evolution of our Universe. Because of this deep connection to the foundations of electroweak symmetry breaking, HH production is also an ideal place to search for manifestations of yet-unknown physics, such as modifications of the strength of the self-coupling and of the interaction between pairs of vector bosons and Higgs bosons. In this review article, we summarize the current searches for HH production at ATLAS and CMS, using the LHC Run 2 dataset, discuss the implications of our current constraints on physics beyond the standard model, and briefly review prospect for future HH searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Principle of Maximum Conformality Correctly Resolves the Renormalization-Scheme-Dependence Problem

In this paper, we clarify a serious misinterpretation and consequent misuse of the Principle of Maximum Conformality (PMC), which also can serve as a mini-review of PMC. In a recently published article, P. M. Stevenson has claimed that “the PMC is ineffective and does nothing to resolve the renormalization-scheme-dependence problem”, concluding incorrectly that the success of PMC predictions is due to the PMC being a “laborious, ad hoc, and back-door” version of the Principle of Minimal Sensitivity (PMS). We show that such conclusions are incorrect, deriving from a misinterpretation of the PMC and an overestimation of the applicability of the PMS. The purpose of the PMC is to achieve precise fixed-order pQCD predictions, free from conventional renormalization schemes and scale ambiguities. We demonstrate that the PMC predictions satisfy all the self-consistency conditions of the renormalization group and standard renormalization-group invariance; the PMC predictions are thus independent of any initial choice of renormalization scheme and scale. The scheme independence of the PMC is also ensured by commensurate scale relations, which relate different observables to each other. Moreover, in the Abelian limit, the PMC dovetails into the well-known Gell-Mann–Low framework, a method universally revered for its precision in QED calculations. Due to the elimination of factorially divergent renormalon terms, the PMC series not only attains a convergence behavior far superior to that of its conventional counterparts but also deftly curtails any residual scale dependence caused by the unknown higher-order terms. This refined convergence, coupled with its robust suppression of residual uncertainties, furnishes a sound and reliable foundation for estimating the contributions from unknown higher-order terms. Anchored in the bedrock of standard renormalization-group invariance, the PMC simultaneously eradicates the factorial divergences and eliminates superfluous systematic errors, which inversely provides a good foundation for achieving high-precision pQCD predictions. Consequently, owing to its rigorous theoretical underpinnings, the PMC is eminently applicable to virtually all high-energy hadronic processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

QED Meson Description of the Anomalous Particles at ∼17 and ∼38 MeV

The Schwinger confinement mechanism stipulates that a massless fermion and a massless antifermion are confined as a massive boson when they interact in the Abelian QED interaction in (1+1)D.If we approximate light quarks as massless and apply the Schwinger confinement mechanism to quarks, we can infer that a light quark and a light antiquark interacting in the Abelian QED interaction are confined as a QED meson in (1+1)D. Similarly, a light quark and a light antiquark interacting in the QCD interaction in the quasi-Abelian approximation will be confined as a QCD meson in (1+1)D. The QED and QCD mesons in (1+1)D can represent physical mesons in (3+1)D when the flux tube radius is properly taken into account. Such a theory leads to a reasonable description of the masses of π0,η, and η′, and its extrapolation to the unknown QED sector yields an isoscalar QED meson at about 17 MeV and an isovector QED meson at about 38 MeV. The observations of the anomalous soft photons, the hypothetical X17 particle, and the hypothetical E38 particle bear promising evidence for the possible existence of the QED mesons. Pending further confirmation, they hold important implications on the properties on the quarks and their interactions.

Wong, Cheuk-Yin (ORCID:0000000182230659)↗

Genetic Subtypes and Natural Resistance Mutations in HCV Genotype 4 Infected Saudi Arabian Patients

This study aimed to characterize the HCV genetic subtypes variability and the presence of natural occurring resistance-associated substitutions (RASs) in Saudi Arabia patients. A total of 17 GT patients were analyzed. Sequence analysis of NS3, NS5A, and NS5B regions was performed by direct sequencing, and phylogenetic analyses were used to determine genetic subtypes, RAS, and polymorphisms. Nine patients were infected by GT 4a, two with GT 4o and three with GT 4d. Two patients were infected with apparent recombinant virus (4a/4o/4a in NS3/NS5A/NS5B), and one patient was infected with a previously unknown, unclassifiable, virus of GT 4. Natural RASs were found in six patients (35%), including three infected by GT 4a, two by GT 4a/GT 4o/GT 4a, and one patient infected by an unknown, unclassifiable, virus of GT 4. In particular, NS3-RAS V170I was demonstrated in three patients, while NS5A-RASs (L28M, L30R, L28M + M31L) were detected in the remaining three patients. All patients were treated with sofosbuvir plus daclatasvir; three patients were lost to follow-up, whereas 14 patients completed the treatment. A sustained virological response (SVR) was obtained in all but one patient carrying NS3-RAS V170I who later relapsed. GT 4a is the most common subtype in this small cohort of Saudi Arabia patients infected with hepatitis C infection. Natural RASs were observed in about one-third of patients, but only one of them showed a treatment failure.

60 APPLIED LIFE SCIENCES↗

Evaluation of Cross-Protection of African Swine Fever Vaccine ASFV-G-ΔI177L Between ASFV Biotypes

Background/Objectives: Vaccine development for the prevention of ASF has been very challenging due to the extensive genetic and largely unknown antigenic diversity. Inactivated vaccines, using different inactivation methods and a variety of adjuvants, have been consistently inefficacious. Historically, animals recovering from an infection with an attenuated virus became protected from the development of a clinical disease caused by an antigenically related strain. Therefore, immunization of susceptible animals with attenuathe ted virus strains has become a common method of vaccination with the first two commercially available vaccines based on recombinant live-attenuated viruses (LAVs). An important limitation is that the efficacy of the LAV is restricted to those strains that are antigenically related and, in most cases, only provide protection against homologous strains. Due to the unknown antigenic heterogeneity among all ASFV field isolates, the development of broad-spectrum vaccines is a challenge. Besides the anecdotal data, there is not a large amount of information describing patterns of cross-protection between different ASFV strains. Methods: We evaluated the cross-protection induced by the ASFV live-attenuated vaccine ASFV-G-ΔI177L against different biotypes of ASFV and compared their genomic sequences to determine potential genetic mutations that could cause the lack of cross-protection. Results: Results presented here demonstrate different patterns of protection when ASFV-G-ΔI177L vaccinated pigs were challenged with six different ASFV field isolates belonging to different biotypes. Conclusions: The presence of cross-protection cannot be predicted solely by the classical methodology for genotyping-based B646L ORF only. Biotyping, considering the entire virus proteome, appears to be a more promising prediction tool, although additional gathering of experimental data will be necessary to fully validate it; until then, the presence of cross-protection needs to be confirmed in efficacy trials challenging vaccinated animals.

Immunology↗

The Atacama Cosmology Telescope: Detection of Millimeter-wave Transient Sources

Here we report on the serendipitous discovery of three transient millimeter-wave sources using data from the Atacama Cosmology Telescope. The first, detected at R.A. = 273.8138, decl. = -49.4628 at ~50σ total, brightened from less than 5 mJy to at least 1100 mJy at 150 GHz with an unknown rise time shorter than 13 days, during which the increase from 250 mJy to 1100 mJy took only 8 minutes. Maximum flux was observed on 2019 November 8. The source's spectral index in flux between 90-150 GHz was positive, α = 1.5 ± 0.2. The second, detected at R.A. = 105.1584, decl. = -11.2434 at ~20σ total, brightened from less than 20 mJy to at least 300 mJy at 150 GHz with an unknown rise time shorter than 8 days. Maximum flux was observed on 2019 December 15. Its spectral index was also positive, α = 1.8 ± 0.2. The third, detected at R.A. = 301.9952, decl. = 16.1652 at ~40σ total, brightened from less than 8 mJy to at least 300 mJy at 150 GHz over a day or less but decayed over a few days. Maximum flux was observed on 2018 September 11. Its spectrum was approximately flat, with a spectral index of α = -0.2 ± 0.1. None of the sources were polarized to the limits of these measurements. The two rising-spectrum sources are coincident in position with M and K stars, while the third is coincident with a G star.

79 ASTRONOMY AND ASTROPHYSICS↗

Algorithm to extract direction in 2D discrete distributions and a continuous Frobenius norm

In this study, we present a novel algorithm for determining directionality in 2D distributions of discrete data. We compare a reference dataset with a known direction to a measured dataset with an unknown direction by the Frobenius norm of the difference (FND) to find the unknown direction. To generalize this concept, we develop a continuous Frobenius norm of the difference (CFND) as a continuous analog of the FND and derive its analytical expression. By relating fitted and normalized 2D Gaussian distributions, we show that the CFND approximates the FND, and we validate this relationship with computer simulations. We find that a first-order approximation of the CFND between two similar Gaussian distributions takes the form of an absolute sine function, offering a simple analytical form with potential for specialized applications in segmented inverse beta decay (IBD) neutrino detectors, astronomy, machine learning, and more. Although this method may easily extend to 3D scalar fields, our focus here is on 2D real-valued fields as it directly applies to directionality. Our methodology consists of modeling a 2D Gaussian distribution, binning the data into a histogram, and encoding it as a square matrix. Rotating this matrix around its geometric center and comparing it to a measured dataset using the FND gives us rotational data that we fit with an absolute sine function. The location of the minimum of this fit is the angle closest to the true angle of the direction in the measured dataset. We present the derivation and discuss initial applications of the CFND in our novel algorithm, demonstrating its success in approximating directionality in 2D distributions.

Data Analysis, Statistics and Probability (physics↗

Grand challenges in the design, manufacture, and operation of future wind turbine systems

Abstract. Wind energy is foundational for achieving 100 % renewable electricity production, and significant innovation is required as the grid expands and accommodates hybrid plant systems, energy-intensive products such as fuels, and a transitioning transportation sector. The sizable investments required for wind power plant development and integration make the financial and operational risks of change very high in all applications but especially offshore. Dependence on a high level of modeling and simulation accuracy to mitigate risk and ensure operational performance is essential. Therefore, the modeling chain from the large-scale inflow down to the material microstructure, and all the steps in between, needs to predict how the wind turbine system will respond and perform to allow innovative solutions to enter commercial application. Critical unknowns in the design, manufacturing, and operability of future turbine and plant systems are articulated, and recommendations for research action are laid out. This article focuses on the many unknowns that affect the ability to push the frontiers in the design of turbine and plant systems. Modern turbine rotors operate through the entire atmospheric boundary layer, outside the bounds of historic design assumptions, which requires reassessing design processes and approaches. Traditional aerodynamics and aeroelastic modeling approaches are pressing against the limits of applicability for the size and flexibility of future architectures and flow physics fundamentals. Offshore wind turbines have additional motion and hydrodynamic load drivers that are formidable modeling challenges. Uncertainty in turbine wakes complicates structural loading and energy production estimates, both around a single plant and for downstream plants, which requires innovation in plant operations and flow control to achieve full energy capture and load alleviation potential. Opportunities in co-design can bring controls upstream into design optimization if captured in design-level models of the physical phenomena. It is a research challenge to integrate improved materials into the manufacture of ever-larger components while maintaining quality and reducing cost. High-performance computing used in high-fidelity, physics-resolving simulations offer opportunities to improve design tools through artificial intelligence and machine learning, but even the high-fidelity tools are yet to be fully validated. Finally, key actions needed to continue the progress of wind energy technology toward even lower cost and greater functionality are recommended.

17 WIND ENERGY↗

Experience with Mercury Spacecraft Systems

Design of a manned spacecraft in 1958 and 1959 required that many decisions be made with no background of direct experience with similar vehicles and very little background of experience on vehicles of any type which had been exposed to the rigors of space. Under such circumstances, it was necessary to establish certain fundamental design principles which were believed to represent the proper balance between the conservatism required by the unknowns, the desired development schedule, and the extreme necessity to conserve weight. One of the foremost of the program objectives was, of course, safety. Broadly speaking, the design principles chosen to achieve the level of safety desired in such an unknown venture were very similar to those used for manned aircraft design.

Spacecraft↗

The distinction of rock types on the basis of their mass spectra, with special reference to lunar-surface applications

It is shown that the rock types most commonly expected to be encountered on the lunar surface can for the most part be readily distinguished, chemically, by plotting their relative concentrations of Fe, Mg, and Al on a ternary variation diagram. The necessary data for characterizing as unknown as to rock type can be quite easily extracted from complete or partial mass spectra such as may be obtained by means of a robot mass spectrometer on the lunar surface. For most compositions, determination of only two nuclide or element rations will characterize the sample. Fo others, the determination of one additional ratio or comparison with a few standard spectra previously obtained in the laboratory may be necessary to clarify the unknown in terms of the chemistry of the terrestrial or meteoritic equivalents. No quantitative assay of element concentrations is necessary for such a first classification.

LUNAR SURFACE↗

ELAS8 - Computer program for linear structure equilibrium problems

Program generates and solves governing equations for unknown deflection of mesh points as if problem were to locate stationary point of total potential function associated with given loading and unknown deflections. Solution is obtained by means of displacement method and finite element technique.

Utku, S.↗

Distribution of error in least-squares solution of an overdetermined system of linear simultaneous equations

Probability density functions were derived for errors in the evaluation of unknowns by the least squares method in system of nonhomogeneous linear equations. Coefficients of the unknowns were assumed correct and computational precision were also assumed. A vector space was used, with number of dimensions equal to the number of equations. An error vector was defined and assumed to have uniform distribution of orientation throughout the vector space. The density functions are shown to be insensitive to the biasing effects of the source of the system of equations.

Miller, C. D.↗

Compound classification by computer treatment of low resolution mass spectra - Application to geochemical and environmental problems.

A description is given of a development of computer analysis of low-resolution chromatographic-mass spectrometric data, which provides a preliminary classification of an unknown spectrum as a listing of candidate classes of compounds. This procedure, referred to as COMSOC (Classification of Mass Spectra on Computers), operates by converting an incoming unknown mass spectrum into a simplified key word which is then compared with each of the key words held in its reference file. The advantages of COMSOC in characterizing complex mixtures are emphasized.

Smith, D. H.↗

Estimation of nonlinear pilot model parameters including time delay.

Investigation of the feasibility of using a Kalman filter estimator for the identification of unknown parameters in nonlinear dynamic systems with a time delay. The problem considered is the application of estimation theory to determine the parameters of a family of pilot models containing delayed states. In particular, the pilot-plant dynamics are described by differential-difference equations of the retarded type. The pilot delay, included as one of the unknown parameters to be determined, is kept in pure form as opposed to the Pade approximations generally used for these systems. Problem areas associated with processing real pilot response data are included in the discussion.

Schiess, J. R.↗

Input frequency requirements for identification through Liapunov methods

A theorem is derived which specifies a sufficient number of input frequencies to guarantee identification of an unknown noise free linear plant. Since all of the referenced work relates to sufficient conditions for nulling of the parameter error vector, it is to be expected that various conditions on the system to be identified will have been imposed. It was found that some of these conditions appear to be necessary while others do not. The main contribution is to provide a theorem which considers the effect of unknown parameters in the state equation upon the frequency requirements.

Kim, C. H.↗