SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Efforts to determine whether rocket propellant density and modulus can be reliably measured using non-destructive ultrasonic techniques are reported. The objective was not achieved, primarily due to the approach taken.
An analysis is presented of the optical (0.44 micron) and radio flux density variations (4.8, 8.0, and 14.5 GHz) of the five best observed variable AGN, of which three are BL Lac objects and two are optically violent variable (OVV) quasars. For each object the nature of the variability at individual wavelengths is determined by using a structure function analysis and the autocorrelation function as calculated from the discrete correlation technique. Both techniques yield similar results, showing that the optical variations are similar for all objects and are a combination of flicker and shot noise. The radio variability is distinct, being described by shot noise (less variation at short times), with the two OVVs exhibiting the most extreme behavior. The time lag between the variations at the three radio frequencies and the optical flux is studied with the discrete cross-correlation function and the mean variance methods. It is concluded that the optical and radio emitting regions are physically related, exist on distinct time scales, and excite their synchrotron emitting plasmas differently.
Pedotransfer functions (PTFs) provide point predictions of soil hydraulic properties from more readily measured soil characteristics, yet uncertainties and biases in measurement methods, sampling distributions, and boundary conditions can limit accuracy when estimating near-saturated hydraulic conductivity (K(n)). These limitations may be particularly problematic in understudied urban landscapes that often contain altered hydraulic properties. To better treat deficiencies in PTF performance, we addressed three objectives, which were to: 1) develop PTFs to predict urban K(n), 2) assess bulk density and coarse fragments as explanatory variables; and 3) evaluate the predictive capability of these PTFs by comparing their output to measured hydraulic conductivity values from three other studies of urban soil hydraulics. We used artificial neural networks (ANN) and random forest (RF) approaches to predict urban K(n), with the training dataset including 307 tension infiltrometer tests and other measurements drawn from urban soil assessments in 11 U.S. cities. The PTFs utilized a hierarchy of inputs, starting with percentage sand, silt, clay, and then adding percentage coarse fragments and bulk density. The ANN models performed similar to the RF models, and all models exhibited similar or better predictive performance as models results collected from published articles. The inclusion of bulk density or coarse fragments did not improve accuracy over soil texture alone. Possible reasons for this result include low correlation between K(n) and bulk density and the exclusion of large voids during flow measurements with tension infiltrometers. The models have been made available as an open-source software package to encourage adoption by users working in urban systems.
Continuing work on the two die-away measurements proposed to be made in the combined pulsed neutron experiment (CPNE) for analysis of lunar and planetary surfaces is described. This report documents research done during Phase 3. A general exposition of data analysis by the least-squares method and the related problem of the prediction of variance is given. A data analysis procedure for epithermal die-away data has been formulated. In order to facilitate the analysis, the number of independent material variables has been reduced to two: the hydrogen density and an effective oxygen density, the latter being determined uniquely from the nonhydrogeneous elemental composition. Justification for this reduction in the number of variables is based on a set of 27 new theoretical calculations. Work is described related to experimental calibration of the epithermal die-away measurement. An interim data analysis technique based solely on theoretical calculations seems to be adequate and will be used for future CPNE field tests.
An investigation was undertaken to determine the effects of the hot-pressing variables (temperature, pressure, and time) on the density and grain size of hafnium carbide disks. The purpose was to provide information necessary for the production of high-density test shapes for the determination of physical and mechanical properties. Hot-pressing of -325 mesh hafnium carbide powder was accomplished with a hydraulic press and an inductively heated graphite die assembly. The ranges investigated for each variable were as follows: temperature, 3500 to 4870 F; pressure, 1000 to 6030 pounds per square inch; and time, 5 to 60 minutes. Hafnium carbide bodies of approximately 98 percent theoretical density can be produced under the following minimal conditions: 4230 F, 3500 pounds per square inch, and 15 minutes. Further increases in temperature and time resulted only in greater grain size.
Irregularities in ionospheric plasma distribution can result in severe scintillation and disruption to the radio frequencies utilized for satellite communications and navigation. In the low and mid latitudes, these irregularities can include Equatorial Plasma Bubbles (EPBs) and Travelling Ionospheric Disturbances (TIDs). EPBs are irregularities manifesting in low latitude nighttime ionosphere plasma density that can extend along magnetic field lines with zonal scales on the order of 100 km or less, while TIDs are propagating wave disturbances. High frequency in-situ measurements of ionospheric plasma aboard spacecraft in Low Earth Orbit (LEO) are a direct measurement of irregularities in plasma density and are therefore valuable for resolving EPB and TID occurrences, variability, and relation to other ionospheric parameters that are believed to play a driving role in the formation of such irregularities. In this study, we utilize observations taken over a three-year period between 2017 and 2020 by the Advanced Ionospheric Probe (AIP) carried aboard the FORMOSAT-5 satellite to examine the spatial, seasonal, and interannual variability of equatorial to mid latitude ionospheric irregularities and vertical ion drift during this time. AIP provides in-situ measurements of ion density and vertical ion drift in the equatorial to mid latitude ionosphere at approximately 720 km altitude with local times between 22:00 – 23:00 local time. Our global scale results resolve distinct and inter-annually recurrent seasonal patterns in the distribution of nighttime ionospheric irregularities and vertical plasma drift during this time. Elevated occurrences of ion density irregularities are resolved along the Equatorial Ionization Anomaly (EIA) latitudes, while notable occurrences with variability consistent with EPBs also observed along the low and equatorial magnetic latitudes. Zonal variability of equatorial irregularities consistent with the signatures of nonmigrating atmospheric tides are observed. It is also notable that the occurrences and geographic distribution of ion density irregularities showed a considerable level of interannual variability, especially at mid latitudes over the South Atlantic and Southern African sectors, which showed much higher levels of irregularities in 2017–––2018, compared to 2019 and 2020. In comparison, the spatial and interannual variation of the co-located vertical ion drifts were much more consistent during the years examined, indicating that the driver for the observed interannual variability in ion density irregularities cannot be attributed to the vertical ion drift at the same time and location of the observations. This highlights the need for in-situ instruments distributed across multiple satellites in different local time zones.
In this work, we utilize fuzzy sets theory to evaluate and make predictions of flexural strength and density of NASA 6Y silicon nitride ceramic. Processing variables of milling time, sintering time, and sintering nitrogen pressure are used as an input to the fuzzy system. Flexural strength and density are the output parameters of the system. Data from 273 Si3N4 modulus of rupture bars tested at room temperature and 135 bars tested at 1370 C are used in this study. Generalized mean operator and Hamming distance are utilized to build the fuzzy predictive model. The maximum test error for density does not exceed 3.3 percent, and for flexural strength 7.1 percent, as compared with the errors of 1.72 percent and 11.34 percent obtained by using neural networks, respectively. These results demonstrate that fuzzy sets theory can be incorporated into the process of designing materials, such as ceramics, especially for assessing more complex relationships between the processing variables and parameters, like strength, which are governed by randomness of manufacturing processes.
Results are reported for high-frequency (0.75, 1.40, 3.24, 6.63, and 10.63 GHz) flux-density measurements of about 100 radio sources exhibiting low-frequency cutoffs. At least three sources (4C 79.4, 4C 79.15, and PKS 2344+09) showed variable structure on a scale ranging from a fraction of an arcmin to as much as 15 arcmin which appears to change significantly on a time scale of several months. The visual fields of these sources and their companion components are searched for identifiable objects, and complete radio spectra as well as contour maps are presented for some of the sources. It is suggested that the variable structure may result from the existence of several emission centers that are highly variable in flux density but fixed in position.
Preliminary results from electric field measurements in the environment of Mars using the plasma-wave system on board Phobos 2 are reported. Electron-plasma oscillations observed upstream of the bow shock correspond to a solar-wind density of 2/cu cm. The shock-foot boundary was crossed up to three times on each orbit. The shock ramp was detected at altitudes between 0.45 and 0.75 Mars radii R(M) above the planetary surface. The density increased by about a factor of two at the ramp. The shock position, although variable, seems to be consistent with previous measurements. The downstream magnetosheath contained broadband electric-field noise below the plasma frequency. The boundary of th obstacle, or plasmapause, was crossed at altitudes of the order of 0.28 R(M); the cold plasma density was highly variable within the planetopause and reached the unexpected value of 700/cu cm on the third orbit, at 0.25 R(M) altitude. Bursts of waves with frequencies below the electron cyclotron frequency occur within the planetopause.
A combination of numerical modeling and analysis of the Pioneer Venus UADS data base is studied, specifically data from the orbiter ion mass spectrometer (OIMS), orbiter neutral mass spectrometer (ONMS), and orbiter electron temperature probe (OETP). A one dimensional model of the Venus nightside ionosphere was set up in which downward fluxes of atomic ions are introduced at the upper boundary to simulate transport of ions from the dayside. The model shows that the densities of mass-28 ions, CO(+) + N(2+), resulting from an influx of atomic ions from the dayside are quite small, due to the high ionization potentials of CO and N2 that make chemical production difficult. A look at the data reveals that the actual densities of mass-28 ions are quite variable, from values near 10 to more than 10(exp 4) cm(exp -3). The excess mass-28 ions are assumed to be produced by electron precipitation and that the presence of high densities of mass-28 ions is a signature of auroral precipitation. A discussion of the atomic oxygen green line in the nightglow of Venus, which is produced mainly by dissociative recombination of O(2+), is presented. Original calculations of production rates of excited states for models based on Pioneer Venus data are also presented.
In this paper, we present a concept of the averaged probability density function (APDF) for studying compressible turbulent reacting flows. The APDF is defined as an ensemble average of the fine grained probability density function (FG-PDF) with a mass density weighting. It can be used to exactly deduce the mass density weighted, ensemble averaged turbulent mean variables. The transport equation for APDF can be derived in two ways. One is the traditional way that starts from the transport equation of FG-PDF, in which the compressible Navier- Stokes equations are embedded. The resulting transport equation of APDF is then in a traditional form that contains conditional means of all terms from the right hand side of the Navier-Stokes equations except for the chemical reaction term. These conditional means are new unknown quantities that need to be modeled. Another way of deriving the transport equation of APDF is to start directly from the ensemble averaged Navier-Stokes equations. The resulting transport equation of APDF derived from this approach appears in a closed form without any need for additional modeling. The methodology of ensemble averaging presented in this paper can be extended to other averaging procedures: for example, the Reynolds time averaging for statistically steady flow and the Reynolds spatial averaging for statistically homogeneous flow. It can also be extended to a time or spatial filtering procedure to construct the filtered density function (FDF) for the large eddy simulation (LES) of compressible turbulent reacting flows.
Extensive new ultraviolet and optical spectra of an atmospheric eclipse define the physical properties throughout the wind and chromosphere of 31 Cyg. These data require mass loss of approximately 3 x 10(exp -8) solar masses/yr in a wind that may merge smoothly into the chromosphere. Considerations of how energy is injected into the wind, however, suggest that the chromosphere and wind are separate structures. Most, if not all, of the velocity structure in metallic lines, which we have heretofore simulated with Doppler widths in the range 15-25 km/s, results from differential expansion of the atmosphere. Electron densities in the inner R(sub star) of the chromosphere are in the range 1.5 x 10(exp 9) - 2 x 10(exp 8)/cu cm, which implies clumping of the gas. The ionization of oxygen and nitrogen is consistent with clumping by factors of 3-30 in the outer chromosphere, roughly the amount required to give enough gas pressure to support the chromosphere. Chromospheric gas in 31 Cyg becomes hotter with increasing height, thus with decreasing optical depth, in a way that seems similar for all the zeta Aur binaries. Excitation temperature for Fe II in 1992/93 rises from about 5000 K at the deepest points sampled to about 12,500 K high in the wind. Strengths of violet Balmer lines give an excitation temperature for hydrogen of 6200-6500 K above a radial mass column density of approximately 0.01 g/sq cm. This amount of excitation implies that Lyman-alpha is thermalized beneath about 4 x 10(exp -3) g/sq cm. The outer atmosphere was symmetrical to within a factor of 2 in 1992/93, although it was clearly variable at this level, and it had similar mass column densities as in 1982. One manifestation of the variability was a flow toward the B star at phases 0.013-0.022 spanning velocities 45-100 km/s. Several lines of evidence point to a complicated and variable ionization in the wind: At large distance from the K star, measured mass column densities are less by up to a factor of 3 than required by a smoothly flowing wind. Also, much of the gas beyond r = 350 solar radii = 1.75 R(sub star) has a negative radial velocity. Radial velocities of the shell lines imply the outer atmosphere rotates in the direction of orbital motion, possibly through the deflection of wind flow lines in this direction.
A supplement to the data relating to the calculation of nonequilibrium radiation in flight regimes of aeroassisted orbital transfer vehicles contains the listings of the computer code NEQAIR (Nonequilibrium Air Radiation), its primary input data, and explanation of the user-supplied input variables. The user-supplied input variables are the thermodynamic variables of air at a given point, i.e., number densities of various chemical species, translational temperatures of heavy particles and electrons, and vibrational temperature. These thermodynamic variables do not necessarily have to be in thermodynamic equilibrium. The code calculates emission and absorption characteristics of air under these given conditions.
VLA 1.4-GHz and 4.9-GHz observations of six DQ Her cataclysmic variables, obtained in the C/D hybrid configuration with 50-MHz bandwidth, 7-sec time resolution, and limiting flux density about 200 microJy on July 21, 1984, are reported. Variable radio emission with time scale less than 5 min, circular polarization less than 15 percent, and flux density 3-5 mJy at 1.4 GHz and 8-16 mJy at 4.9 GHz is detected from AE Aqr. This emission is tentatively attributed to synchrotron emission from mildly relativistic electrons, powered by the MHD torque coupling the magnetic white dwarf to either (1) a secondary with a strong magnetic field or (2) an accretion disk.
Objectives: Given that high-resolution WRF forecasts can capture the character of convective outbreaks, we seek to: 1. Create WRF forecasts of LTG threat (1-24 h), based on 2 proxy fields from explicitly simulated convection: - graupel flux near -15 C (captures LTG time variability) - vertically integrated ice (captures LTG threat area). 2. Calibrate each threat to yield accurate quantitative peak flash rate densities. 3. Also evaluate threats for areal coverage, time variability. 4. Blend threats to optimize results. 5. Examine sensitivity to model mesh, microphysics. Methods: 1. Use high-resolution 2-km WRF simulations to prognose convection for a diverse series of selected case studies. 2. Evaluate graupel fluxes; vertically integrated ice (VII). 3. Calibrate WRF LTG proxies using peak total LTG flash rate densities from NALMA; relationships look linear, with regression line passing through origin. 4. Truncate low threat values to make threat areal coverage match NALMA flash extent density obs. 5. Blend proxies to achieve optimal performance 6. Study CAPS 4-km ensembles to evaluate sensitivities.
An acoustic-ultrasonic method is described that was successful in ranking unidirectional graphite-polyimide composite specimens according to variations in interlaminar shear strength. Using this method, a quantity termed the stress wave factor was determined. It was found that this factor increases directly with interlaminar shear strength. The key variables in this investigation were composite density, fiber weight fraction, and void content. The stress wave factor and other ultrasonic factors that were studied were found to provide a powerful means for nondestructive evaluation of mechanical strength properties.
Implicit finite-difference scheme efficiently computes unsteady potential flow about airfoils. Formulation uses density and velocity potential as dependent variables. Conservation form is retained to assure that shock wave location and speed are computed correctly. Scheme fills need for method to calculate efficiently unsteady potential flow about airfoils and to predict flutter and other unsteady aeroelastic phenomena in transonic flow regimes.
An implicit finite difference scheme for an efficient computation of unsteady potential flow about airfoils is presented. The formulation uses density and velocity potential as dependent variables, and is cast in conservation form to assure the theoretically correct determination of shockwave location and speed. To enable boundary conditions to be imposed directly on the airfoil surface, a time varying sheared rectilinear coordinate transformation is employed. Calculated time history solutions on a pulsating airfoil are compared with the results of another unsteady transonic code. It is concluded that the method has excellent numerical stability and gives accurate solutions with sharply resolved shocks.