Search NASA⌕ Search

SEARCH · Search NASA

Results for “Absorption spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Iterative Bragg peak removal on X-ray absorption spectra with automatic intensity correction

This study introduces a novel iterative Bragg peak removal with automatic intensity correction (IBR-AIC) methodology for X-ray absorption spectroscopy (XAS), specifically addressing the challenge of Bragg peak interference in the analysis of crystalline materials. The approach integrates experimental adjustments and sophisticated post-processing, including an iterative algorithm for robust calculation of the scaling factor of the absorption coefficients and efficient elimination of the Bragg peaks, a common obstacle in accurately interpreting XAS data, particularly in crystalline samples. The method was thoroughly evaluated on dilute catalysts and thin films, with fluorescence mode and large-angle rotation. The results underscore the technique's effectiveness, adaptability and substantial potential in improving the precision of XAS data analysis. While demonstrating significant promise, the method does have limitations related to signal-to-noise ratio sensitivity and the necessity for meticulous angle selection during experimentation. Overall, IBR-AIC represents a significant advancement in XAS, offering a pragmatic solution to Bragg peak contamination challenges, thereby expanding the applications of XAS in understanding complex materials under diverse experimental conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Silver-Loaded Xerogel Nanostructures for Iodine Capture: A Comparison of Thiolated versus Unthiolated Sorbents

Here this paper describes the development and provides comparisons of thiolated (-SH) and unthiolated Ag-Al-Si-O xerogels for iodine gas capture. These xerogels were produced from alkoxides and then heat-treated at 350 °C to provide mechanical strength for subsequent processing steps. Then, a portion of the xerogels was thiolated using (3-mercaptopropyl)trimethoxysilane. Next, thiolated and unthiolated batches were ion-exchanged in AgNO 3 solutions where Ag + replaced Na + in the gel network on a near 1:1 molar basis. Subsamples of the Ag-exchanged xerogels were subjected to a reduction step in H 2 /Ar to convert Ag + to Ag 0 where the rest of the Ag-exchanged (Ag + ) were not reduced. X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy revealed nanoscale Ag 0 in the Ag + samples despite no active reduction where actively reduced samples had bimodal Ag 0 distribution of ~2-3 nm hexagonal and ~6-7 nm cubic crystallites. Synchrotron X-ray absorption spectroscopy was used to assess the oxidization states of Ag, S, and I within the different xerogel samples. The specific surface areas of the base xerogels decreased as subsequent treatments were performed on the as-made samples, albeit the decreases were smaller than aerogel equivalents of these samples from a previous study. All iodine-loaded Ag-based samples showed a mixture of β-AgI and γ-AgI. Comparisons of iodine-loading results with other Ag-based iodine sorbents show that the thiolated Ag 0 -xerogels in this work have one of the highest iodine-loading capacities (q e ) reported to date in saturated conditions with the thiolated Ag 0 -xerogel showing 522 mg iodine per g of the sorbent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exploring magnetic anisotropy and robustness of the J eff = 1/2 state under substantial orthorhombic distortion in Sr 2 IrO 4 thin films

Here, we present a comprehensive study revealing the intricate interplay of the magnetic anisotropy and orthorhombic distortion in thin films of Sr 2 IrO 4 through a Ca 3 Ru 2 O 7 substrate. By inducing a pronounced orthorhombic distortion along the direction of oxygen octahedral edges, we effectively modulated the uniaxial magnetic anisotropy in the system. Remarkably divergent responses along the easy and hard magnetic axes were unveiled through x-ray magnetic circular dichroism (XMCD) measurements under magnetic fields. Specifically, the spin flop transition observed when the magnetic field aligns with the hard axis allows us to estimate the magnetic anisotropy energy, which is around 14.2 µeV, close to that estimated from the single magnon peak measured via Raman spectroscopy. The observed anisotropy energy remains notably lower than the linear estimates derived from the strain-anisotropy energy relationship outlined in H.-H. Kim et al., Nat. Commun. 13, 6674 (2022). This underscores the enduring preservation of the isotropic character of the J eff = 1/2 states. This is also supported by the negligible XMCD intensity ratio at the L 2 edge compared to that of the L 3 edge. Furthermore, the branching ratio determined from x-ray absorption spectroscopy shows that the expectation value of the spin-orbit coupling is similar to that of bulk Sr 2 IrO 4 single crystals. Our findings indicate that even under a substantial anisotropic biaxial distortion, Sr 2 IrO 4 remains remarkably proximate to the J eff = 1/2 state. This study not only provides valuable information in understanding the interplay between magnetic anisotropy and strain but also the robustness of the J eff = 1/2 state under octahedral distortion within materials exhibiting emergent quantum phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Orbital and spin character of doped carriers in infinite-layer nickelates

The recent discovery of superconductivity in Nd1-xSrxNiO2 has drawn significant attention in the field. A key open question regards the evolution of the electronic structure with respect to hole doping. Here we exploit x-ray absorption spectroscopy (XAS) and resonant inelastic x-ray scattering (RIXS) to probe the doping-dependent electronic structure of Nd1-xSrxNiO2. Upon doping, a high-energy feature in Ni L3-edge XAS develops in addition to the main absorption peak, while XAS at the O K-, Nd M3- and Nd M5-edge exhibits a much weaker response. This implies that doped holes are mainly introduced into Ni 3d states. By comparing our data to atomic multiplet calculations including D4h crystal field, the doping-induced feature in Ni L3-edge XAS is consistent with a d8 spin-singlet state in which doped holes reside in the 3dx2-y2 orbitals. This is further supported by the softening of RIXS orbital excitations due to doping, corroborating with the Fermi level shift associated with increasing holes in the Ni 3dx2-y2 orbital.

2-dimensional systems↗
DOE OSTI2026

Nanocrystal-to-Ligand Interfacial Thermal Transport: Plasmonic Indium Tin Oxide to Perylene Diimide Adsorbates

The generation and dissipation of heat in nanocrystals upon optical excitation is a process which may either limit or enhance their performance in certain applications. Using transient absorption spectroscopy, we tracked the flow of heat from plasmonic tin-doped indium oxide (ITO) nanocrystals to surface adsorbed perylenediimide (PDI) molecules upon excitation of the ITO near-infrared plasmon resonance. Here, we rationalize the derivative line shapes observed in the transient absorption bleach features are the result of thermal transfer from the ITO core to surface ligands based on temperature-dependent static absorption studies of the PDI molecules adsorbed on plasmonic ITO. Through a series of pump power dependent measurements, we demonstrate that the PDI heating time is largely fluence independent at the powers measured, while the overall recovery time increases. Elucidating thermal transfer rates at the nanocrystal and organic ligand interface is key for applications such as plasmon mediated photocatalysis, where heating may obfuscate hot carrier transfer processes.

heat dissipation↗
DOE OSTI2022

Picoseconds-Limited Exciton Recombination in Metal–Organic Chalcogenides Hybrid Quantum Wells

Metal-organic species can be designed to self-assemble in large-scale, atomically defined, supramolecular architectures. Hybrid quantum wells, where inorganic two-dimensional (2D) planes are separated by organic ligands, are a particular example. The ligands effectively provide an intralayer confinement for charge carriers resulting in a 2D electronic structure, even in multilayered assemblies. Air-stable metal organic chalcogenides hybrid quantum wells have recently been found to host tightly bound 2D excitons with strong optical anisotropy in a bulk matrix. Here, we investigate the excited carrier dynamics in the prototypical metal organic chalcogenide [AgSePh] ∞ , disentangling three excitonic resonances by low temperature transient absorption spectroscopy. Our analysis suggests a complex relaxation cascade comprising ultrafast screening and renormalization, inter-exciton relaxation, and self-trapping of excitons within few picoseconds. Finally, the ps-decay provided by the self-trapping mechanism may be leveraged to unlock the material's potential for ultrafast optoelectronic applications.

2D excitons↗
DOE OSTI2021

DR-RINS: Digital real-time relative intensity noise suppressor for pump–probe spectroscopy and microscopy

Relative intensity noise (RIN) inherent in fiber lasers poses a serious obstacle to their use in pump–probe spectroscopy and imaging. RIN can be removed through an analog balanced detector, or, as we have previously shown, software adaptive noise cancellation (ANC) on digitized signals. One major drawback to software ANC is the added time required for digitizing and post-processing. In this article, we describe a design for ANC on a field-programmable gate array (FPGA), making use of high-level synthesis tools and fixed-point arithmetic to achieve real-time laser RIN suppression at 25 MHz sample rates. Unlike the software-ANC approach, the FPGA-ANC device can serve as a dedicated drop-in denoiser, placed between the detectors and a commercial lock-in amplifier. We demonstrate its application to transient absorption spectroscopy and microscopy, lowering the noise floor to ~17 dB above the shot noise limit. Furthermore, we demonstrate a dramatic improvement in data acquisition time from ~6 h to ~5 min in a real-time imaging scenario.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Local Structure of Sulfur Vacancies on the Basal Plane of Monolayer MoS 2

We report the nature of the S-vacancy is central to controlling the electronic properties of monolayer MoS 2 . Understanding the geometric and electronic structures of the S-vacancy on the basal plane of monolayer MoS 2 remains elusive. Here, operando S K-edge X-ray absorption spectroscopy shows the formation of clustered S-vacancies on the basal plane of monolayer MoS 2 under reaction conditions (H 2 atmosphere, 100–600 °C). First-principles calculations predict spectral fingerprints consistent with the experimental results. The Mo K-edge extended X-ray absorption fine structure shows the local structure as coordinatively unsaturated Mo with 4.1 ± 0.4 S atoms as nearest neighbors (above 400 °C in an H 2 atmosphere). Conversely, the 6-fold Mo–Mo coordination in the crystal remains unchanged. Electrochemistry confirms similar active sites for hydrogen evolution. The identity of the S-vacancy defect on the basal plane of monolayer MoS 2 is herein elucidated for applications in optoelectronics and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ultrathin Amorphous Silica Membrane Enhances Proton Transfer across Solid-to-Solid Interfaces of Stacked Metal Oxide Nanolayers while Blocking Oxygen

A large jump of proton transfer rates across solid-to-solid interfaces by inserting an ultrathin amorphous silica layer into stacked metal oxide nanolayers is discovered using electrochemical impedance spectroscopy and Fourier-transform infrared reflection absorption spectroscopy (FT-IRRAS). The triple stacked nanolayers of Co 3 O 4 , SiO 2 , and TiO 2 prepared by atomic layer deposition (ALD) enable a proton flux of 2400 ± 60 s -1 nm -2 (pH 4, room temperature), while a single TiO 2 (5 nm) layer exhibits a threefold lower flux of 830 s -1 nm -2 . Based on FT-IRRAS measurements, this remarkable enhancement is proposed to originate from the sandwiched silica layer forming interfacial SiOTi and SiOCo linkages to TiO 2 and Co 3 O 4 nanolayers, respectively, with the O bridges providing fast H + hopping pathways across the solid-to-solid interfaces. Finally, together with the complete O 2 impermeability of a 2 nm ALD-grown SiO 2 layer, the high flux for proton transport across multi-stack metal oxide layers opens up the integration of incompatible catalytic environments to form functional nanoscale assemblies such as artificial photosystems for CO 2 reduction by H 2 O.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stabilizing Reversible Oxygen Redox Chemistry in Layered Oxides for Sodium‐Ion Batteries

Abstract Triggering oxygen‐related activity is demonstrated as a promising strategy to effectively boost energy density of layered cathodes for sodium‐ion batteries. However, irreversible lattice oxygen loss will induce detrimental structure distortion, resulting in voltage decay and cycle degradation. Herein, a layered structure P2‐type Na 0.66 Li 0.22 Ru 0.78 O 2 cathode is designed, delivering reversible oxygen‐related and Ru‐based redox chemistry simultaneously. Benefiting from the combination of strong Ru 4d‐O 2p covalency and stable Li location within the transition metal layer, reversible anionic/cationic redox chemistry is achieved successfully, which is proved by systematic bulk/surface analysis by in/ex situ spectroscopy (operando Raman and hard X‐ray absorption spectroscopy, etc.). Moreover, the robust structure and reversible phase transition evolution revealed by operando X‐ray diffraction further establish a high degree reversible (de)intercalation processes (≈150 mAh g −1 , reversible capacity) and long‐term cycling (average capacity drop of 0.018%, 500 cycles).

Cao, Xin↗
DOE OSTI2021

Kinetic studies of excited singlet oxygen atom O( 1 D) reactions with ethanol

In this work, themultichannel reaction of excited singlet oxygen atom with ethanol, O( 1 D) + C 2 H 5 OH (1), was studied in a photolysis flow reactor coupled with mid-infrared Faraday rotation spectroscopy (FRS) and UV-IR direct absorption spectroscopy (DAS) at 297 K with reactor pressures of 60, 120, and 150 Torr (bath He). The excited singlet oxygen atom was generated through the photolysis of O 3 at 266 nm. The photon flux and O( 1 D) concentrations were determined by in situ actinometry based on O 3 depletion. Temporal profiles of OH and H 2 O were monitored via DAS signals at ca. 3568.62 and 3568.29 cm –1 , while temporal profiles of HO 2 were measured via FRS signals at ca. 1396.90 cm –1 . The branching ratios of the target reaction (1) were determined by fitting temporal profiles to simulations from an in-house reaction mechanism. Two major reaction channels were identified as CH 3 CHOH + OH and CH 3 O + CH 2 OH, and their branching ratios were determined as 0.46 ± 0.12 and 0.42 ± 0.11, respectively. A specific HO 2 + RO 2 reaction between HO 2 and O 2 CH 2 CH 2 OH (β-RO 2 ) at the low-temperature range is estimated in this work as HO 2 + O 2 CH 2 CH 2 OH → products with a rate constant of 7 × 10 –12 cm 3 molecule –1 s –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Performance and lifetime of intercalative water deionization cells for mono- and divalent ion removal

We report intercalative deionization (IDI) uses two cation intercalation electrodes separated by an anion exchange membrane in a symmetric cell design that has the potential to deliver electrochemically desalinated water in an energy- and water-efficient way. Here, we define and measure metrics to describe the performance and lifetime of IDI cells and compare them for NaCl and CaCl 2 feed solutions. With 20 mM NaCl, NiHCF/AEM/NiHCF flow cells achieve 10 mM average concentration change at a productivity of 20 l/h/m 2 and 5 mM average concentration change at 130 l/h/m 2 . In both cases the cells are operated at a 3C current rate and consume ~30 Wh/m 3 of energy. With 10 mM CaCl 2 , the specific capacity and salt removal of IDI flow cells is ~4 times lower. NiHCF/NiHCF beaker cells with CaCl 2 electrolyte suffer from strong capacity fade, while the same cells with NaCl electrolyte achieve 500 cycles without any capacity fade. Our post-mortem analysis using X-ray diffraction, secondary electron microscopy, energy dispersive X-ray spectroscopy, synchrotron-based X-ray absorption spectroscopy and micro X-ray fluorescence mapping reveals that NiHCF dissolves upon repeated intercalation with Ca 2+ , releasing residual K + , Ni 2+ and Fe(CN) 6 3 , which precipitates as a crystalline decomposition product on the electrodes. This side reaction deprives the active material NiHCF of charge compensating Fe, and thus accounts for the observed capacity fade.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The interaction of acetonitrile with H-terminated and depassivated (100) diamond surfaces

Molecular adsorption on reactive semiconductor surfaces may enable novel surface functionalisation and atomically-precise dopant formation. In this work synchrotron-based x-ray photoelectron spectroscopy and near edge x-ray absorption spectroscopy are used to examine the interaction between acetonitrile and diamond (100) surfaces under ultrahigh vacuum (UHV) conditions. We observe two surface-bound nitrogen species on hydrogen terminated surfaces after thermal depassivation or following synchrotron radiation and subsequent exposure to acetonitrile, but find no evidence of nitrogen adsorption on the hydrogen-terminated diamond surface, at room temperature. Subsequent measurements explore the stability of the surface-bound nitrogen under various temperature conditions and with atmospheric exposure. While the nitrogen coverage achieved in this study is low, this study serves as a proof-of-concept demonstration of a UHV molecular dosing approach to selective nitrogen functionalisation of diamond surfaces as an alternative to plasma-based approaches. This development may be critical for proposed surface-based fabrication workflows using atomic placement of nitrogen-vacancy centres to create quantum devices.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Effect of Si/Al ratio of ZSM-5 support on structure and activity of Mo species in methane dehydroaromatization

The effect of the Si/Al ratio of the ZSM-5 support on the structure and activity of Mo/HZSM-5 catalysts in methane dehydroaromatization (MDA) was studied. ZSM-5 (with Si/Al = 15, 25, and 40) supported Mo oxide catalysts (MoOx/ZSM-5) with 3 and 10 wt% Mo loading were prepared by incipient wetness impregnation followed by calcination in air at 500 °C. The as-prepared catalysts were activated by temperature programmed reduction in hydrogen in order to maximize Mo dispersion. To understand the structure-activity relationship, the fresh and spent samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N2 adsorption isotherms, Scanning Transmission Electron Microscopy with Energy Dispersive X-Ray Spectroscopy (STEM-EDS), X-ray absorption spectroscopy (EXAFS and XANES), thermogravimetric analysis (TGA), and Raman spectroscopy. The results show that the Si/Al ratio does not influence the the local structure around the Mo centers. It does however affect the number of available Brønsted acid sites in the support and the amount of Mo species entering the zeolite channels. A lower Si/Al ratio and higher Mo loading resulted in a higher Mo occupation within the zeolite channels. The higher channel occupation directly correlated with higher benzene selectivity and yield, as well as a lower catalyst deactivation rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Kinetic study of reaction C 2 H 5 + HO 2 in a photolysis reactor with time-resolved Faraday rotation spectroscopy

The rate constant and branching ratios of ethyl reaction with hydroperoxyl radical, C 2 H 5 + HO 2 (1), a key radical-radical reaction for intermediate temperature combustion chemistry, were measured in situ for the first time in a photolysis Herriott cell by using mid-IR Faraday rotation spectroscopy (FRS) and UV-IR direct absorption spectroscopy (DAS). The microsecond time-resolved diagnostic technique in this work enabled the direct rate measurements of the target reaction at 40 and 80 mbar and reduced the experimental uncertainty considerably. C 2 H 5 and HO 2 radicals were generated by the photolysis of (COCl) 2 /C 2 H 5 I/CH 3 OH/O 2 /He mixture at 266 nm. By direct measurements of the transient profiles of C 2 H 5 , HO 2 and OH concentrations, the overall rate constant for this reaction at 297 K was determined as k 1 (40 mbar) = (3.8 ± 0.8) × 10 –11 cm 3 molecule –1 s –1 and k 1 (80 mbar) = (4.1 ± 1.0) × 10 –11 cm 3 molecule –1 s –1 . As a result, the direct observation of hydroxyl radical (OH) indicated that OH formation channel was the major channel with a branching ratio of 0.8 ± 0.1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reactivity of a Zirconia–Copper Inverse Catalyst for CO 2 Hydrogenation

Copper–zirconia catalysts have been shown to be effective for methanol synthesis via CO 2 hydrogenation, yet the active phases and reaction mechanism remain uncertain. Here, an inverse model catalyst ZrO 2 /CuO 2 /Cu(111) was prepared by mass-selected ion deposition and tested for CO 2 hydrogenation under near-ambient pressure (AP) reaction conditions by using X-ray photoelectron spectroscopy (NAP-XPS) and infrared reflection–absorption spectroscopy (NAP-IRAS). The spatial resolution afforded by the small entrance cone of the AP-XPS spectrometer was used to resolve regions of the surface with and without Zr deposition. Carbon 1s core level spectra of the ZrO 2 /Cu 2 O/Cu(111) regions of the surface under 500 mTorr of CO 2 + H 2 (1:3 ratio) show evidence for reaction intermediates including carbonate (CO 3 *), formate (HCOO*), and H x CO* species, with methoxy having the highest surface concentration at 500–600 K. These intermediates are confirmed by IRAS vibrational spectra. In regions of the surface without Zr, the Cu 2 O/Cu(111) is reduced to metallic Cu, and the surface intermediates are different and are present at much lower concentrations. The observed surface intermediates and their temperature dependence suggest a mechanism in which CO 2 is adsorbed on zirconia as carbonate (CO 3 *) and then converted to HCOO* and H x CO* hydrogenated intermediates that ultimately lead to methoxy (CH 3 O*), the final surface-bound precursor for methanol. Overall, the results clearly demonstrate the promotional effects of small ZrO 2 particles for enhancing the reactivity of Cu surfaces for CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Modulating Hole Transfer from CdSe Quantum Dots by Manipulating the Surface Ligand Density

The structure and density of surface capping ligands in cadmium chalcogenide quantum dots (QDs) are important considerations for controlling the efficiency of charge separation via the transfer of electrons or holes to molecular acceptors. Here we show how the manipulation of the surface ligand density of oleic acid-capped cadmium selenide (CdSe) QDs impacts the efficiency of hole transfer (HT) to polyoxovanadate alkoxides. Meerwein’s salt is used as a ligand-stripping agent, providing opportunities to quantitatively manipulate the ligand density at the surface of the nanocrystal, as evidenced by 1 H NMR spectroscopy. Time-resolved photoluminescence and transient absorption spectroscopies reveal that the extent of HT is quantitatively related to increased surface accessibility. Collectively, these results show that the reduction of surface ligand density can be used to tune the extent of interactions of molecular acceptors with QDs, providing a route to control charge-transfer processes relevant to improving the efficiency of QDs as photosensitizers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Mitigating Hydrogen-Induced Degradation of Iridium Anodes in Proton Exchange Membrane Water Electrolyzers

One promising method for reducing precious metal usage in proton exchange membrane water electrolysis is lowering iridium (Ir) loading at the anode. However, low-loading Ir catalysts often suffer from poor stability under high current densities. In this study, hydrogen (H2) crossover from the cathode to the anode is identified as a key degradation pathway. Temperature-programmed reduction confirms the reduction of IrO2 at 80 °C in a hydrogen environment, highlighting the vulnerability of IrO2-based catalysts to H2 exposure. To mitigate this effect, palladium (Pd) is introduced as an anode additive, acting as an H2 oxidation catalyst and mitigating IrO2 reduction. This protective role is verified by inductively coupled plasma optical emission spectroscopy and in situ X-ray absorption spectroscopy, showing significantly suppressed Ir dissolution at 80 °C under H2 flow when an O-covered Pd surface is present at oxygen evolution reaction potentials. Results from the current study identify a new strategy in improving activity and durability of catalysts in electrolyzers.

58 GEOSCIENCES↗