Search NASA⌕ Search

SEARCH · Search NASA

Results for “Amorphous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

X-ray Scattering and O–O Pair-Distribution Functions of Amorphous Ices

The structure factor and oxygen-oxygen pair distribution functions of amorphous ices at liquid nitrogen temperature (T = 77 K) have been derived from wide-angle X-ray scattering (WAXS) up to interatomic distances of r = 23 angstrom, where local structure differences between the amorphous ices can be seen for the entire range. The distances to the first coordination shell for low-, high-, and very-high-density amorphous ice (LDA, HDA, VHDA) were determined to be 2.75, 2.78, and 2.80 angstrom, respectively, with high accuracy due to measurements up to a large momentum transfer of 23 angstrom(-1). Similarities in pair-distribution functions between LDA and supercooled water at 254.1 K, HDA and liquid water at 365.9 K, and VHDA and high-pressure liquid water were found up to around 8 angstrom, but beyond that at longer distances, the similarities were lost. In addition, the structure of the high-density amorphous ices was compared to high-pressure crystalline ices IV, IX, and XII, and conclusions were drawn about the local ordering.

36 MATERIALS SCIENCE↗

Additive Molar Volumes in Amorphous Ca/Sr Carbonate Solid Solutions

The development of predictive models of minor element incorporation in crystalline carbonate end products requires an understanding of the fundamental controls on metastable intermediate phase composition. In this study, we used small-angle X-ray scattering (SAXS), X-ray pair distribution function (PDF), thermogravimetric analysis (TGA), inductively coupled plasma mass spectrometry (ICP-MS), and transmission electron microscopy (TEM) to determine the composition-dependent density of an amorphous calcium–strontium carbonate (ACSC) solid solution. The amorphous calcium carbonate (ACC) and strontium carbonate (ASC) measured densities were ρ ACC = 2.19 ± 0.04 g/cm 3 and ρ ASC = 2.97 ± 0.05 g/cm 3 . Throughout our work, the experiments showed a dependence of the water content of the amorphous solid solution on the Sr mole fraction. An equation that relates the molar volume to the average cation radius, the carbonate ion radius, and the water volume was parameterized for hydrated crystalline carbonates and predicted well the molar volume of the ACSC solid solution. This finding indicates that, as for hydrated crystalline carbonates, the molar volumes of amorphous carbonates are additive and that water is a structural component of ACSC. Ab initio molecular dynamics (AIMD) simulations of the ACSC solid solutions showed strong linear correlations between calculated molar volumes and Sr and H 2 O contents, thus supporting the experimental results. In conclusion, our findings highlight the need to consider the full CaCO 3 –MeCO 3 –H 2 O ternary when quantifying metal cation incorporation in ACC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wafer-Scale Synthesis of 2D Materials by an Amorphous Phase-Mediated Crystallization Approach

The interest in the wafer-scale growth of two-dimensional (2D) materials, including transition metal dichalcogenides (TMDCs), has been rising for transitioning from lab-scale devices to commercial-scale systems. Among various synthesis techniques, physical vapor deposition, such as pulsed laser deposition (PLD), has shown promise for the wafer-scale growth of 2D materials. However, due to the high volatility of chalcogen atoms (e.g., S and Se), films deposited by PLD usually suffer from a lack of stoichiometry and chalcogen deficiency. To mitigate this issue, excess chalcogen is necessary during the deposition, which results in problems like uniformity or not being repeatable. This study demonstrates a condensed-phase or amorphous phase-mediated crystallization (APMC) approach for the wafer-scale synthesis of 2D materials. This method uses a room-temperature PLD process for the deposition and formation of amorphous precursors with controlled thicknesses, followed by a post-deposition crystallization process to convert the amorphous materials to crystalline structures. This approach maintains the stoichiometry of the deposited materials throughout the deposition and crystallization process and enables the large-scale synthesis of crystalline 2D materials (e.g., MoS 2 and WSe 2 ) on Si/SiO 2 substrates, which is critical for future wafer-scale electronics. We show that the thickness of the layers can be digitally controlled by the number of laser pulses during the PLD phase. Optical spectroscopy is used to monitor the crystallization dynamics of amorphous layers as a function of annealing temperature. The crystalline quality, domain sizes, and the number of layers were explored using nanoscale and atomistic characterization (e.g., AFM, STEM, and EDS) along with electrical characterization to explore process–structure–performance relationships. Finally, this growth technique is a promising method that could potentially be adopted in conventional semiconductor industries for wafer-scale manufacturing of next-generation electronic and optoelectronic devices.

2D electronics↗

Non-stoichiometry Governs the Pathway from Amorphous to Crystalline Calcium Carbonate

The controlled crystallization of calcium carbonate underlies the elaborate architectures of marine corals, the design of biomimetic materials, and the global carbon cycle. Despite its ubiquity, the chemical mechanisms that govern the crystallization of calcium carbonate from its amorphous precursor, amorphous calcium carbonate (ACC), remain elusive, largely due to the difficulty in resolving the structure and chemistry of this transient amorphous state. Here, we use time-lapse photography, image analysis, spatially resolved pH determination, in situ synchrotron pair distribution function (PDF) analysis, and dynamic nuclear polarization (DNP) solid-state nuclear magnetic resonance (NMR) spectroscopy to reveal pervasive compositional variability in ACC that underpins its metastability and crystallization. By evaluating the kinetics of the amorphous-to-crystalline transition across different solution chemistries, we demonstrate that ACC is non-stoichiometric and CO 3 -deficient. Counterions from the precursor (e.g., NO 3 - from Ca(NO 3 ) 2 ) substitute into the ACC network, displacing CO 3 ions and mediating both ACC stability and transformation. Crystallization proceeds through refinement of the stoichiometry toward CaCO 3 and uptake of free CO 3 2- anions. Furthermore, these findings are consistent across a wide range of concentrations and different carbonate sources, explaining the diverse behaviors observed for ACC and providing a chemical framework for controlling calcium carbonate crystallization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of structure and composition on the electronic excitation induced amorphization of La2Ti2−xZrxO7 ceramics

Abstract Understanding the response of ceramics operating in extreme environments is of interest for a variety of applications. Ab initio molecular dynamic simulations have been used to investigate the effect of structure and B -site (=Ti, Zr) cation composition of lanthanum-based oxides (La 2 B 2 O 7 ) on electronic-excitation-induced amorphization. We find that the amorphous transition in monoclinic layered perovskite La 2 Ti 2 O 7 occurs for a lower degree of electronic excitation than for cubic pyrochlore La 2 Zr 2 O 7 . While in each case the formation of O 2 -like molecules drives the structure to an amorphous state, an analysis of the polyhedral connection network reveals that the rotation of TiO 6 octahedra in the monoclinic phase can promote such molecule formation, while such octahedral rotation is not possible in the cubic phase. However, once the symmetry of the cubic structure is broken by substituting Ti for Zr, it becomes less resistant to amorphization. A compound made of 50% Ti and 50% Zr (La 2 TiZrO 7 ) is found to be more resistant in the monoclinic than in the cubic phase, which may be related to the lower bandgap of the cubic phase. These results illustrate the complex interplay of structure and composition that give rise to the radiation resistance of these important functional materials.

36 MATERIALS SCIENCE↗

Amorphizing noble metal chalcogenide catalysts at the single-layer limit towards hydrogen production

Rational design of noble metal catalysts with the potential to leverage efficiency is vital for industrial applications. Such an ultimate atom-utilization efficiency can be achieved when all noble metal atoms exclusively contribute to catalysis. In this work, we demonstrate the fabrication of a wafer-size amorphous PtSex film on a SiO 2 substate via a low-temperature amorphization strategy, which offers single-atom-layer Pt catalysts with high atom-utilization efficiency (~26 wt%). This amorphous PtSex (1.2 < x < 1.3) behaves as a fully activated surface, accessible to catalytic reactions, and features a nearly 100% current density relative to a pure Pt surface and reliable production of sustained high-flux hydrogen over a 2 inch wafer as a proof-of-concept. Furthermore, an electrolyser is demonstrated to generate a high current density of 1,000 mA cm –2 . Such an amorphization strategy is potentially extendable to other noble metals, including the Pd, Ir, Os, Rh and Ru elements, demonstrating the universality of single-atom-layer catalysts.

36 MATERIALS SCIENCE↗

Fe-rich X-ray amorphous material records past climate and persistence of water on Mars

X-ray amorphous material comprises 15-73 wt.% of sedimentary rocks and eolian sediments in Gale crater. This material is variably siliceous and iron rich but aluminum poor. The presence of volatiles is consistent with the existence of incipient weathering products. To better understand the implications of this material for past aqueous conditions on Mars, here we investigate X-ray amorphous material formation and longevity within terrestrial iron rich soils with varying ages and environmental conditions using bulk and selective dissolution methods, X-ray diffraction, and transmission electron microscopy. Results indicate that in situ aqueous alteration is required to concentrate iron into clay-size fraction material. Cooler climates promote the formation and persistence of X-ray amorphous material whereas warmer climates promote the formation of crystalline secondary phases. Iron rich X-ray amorphous material formation and persistence on Mars are therefore consistent with past cool and relatively wet environments followed by long-term cold and dry conditions.

54 ENVIRONMENTAL SCIENCES↗

Large-deformation and high-strength amorphous porous carbon nanospheres

Carbon is one of the most important materials extensively used in industry and our daily life. Crystalline carbon materials such as carbon nanotubes and graphene possess ultrahigh strength and toughness. In contrast, amorphous carbon is known to be very brittle and can sustain little compressive deformation. Inspired by biological shells and honeycomb-like cellular structures in nature, we introduce a class of hybrid structural designs and demonstrate that amorphous porous carbon nanospheres with a thin outer shell can simultaneously achieve high strength and sustain large deformation. The amorphous carbon nanospheres were synthesized via a low-cost, scalable and structure-controllable ultrasonic spray pyrolysis approach using energetic carbon precursors. In situ compression experiments on individual nanospheres show that the amorphous carbon nanospheres with an optimized structure can sustain beyond 50% compressive strain. Both experiments and finite element analyses reveal that the buckling deformation of the outer spherical shell dominates the improvement of strength while the collapse of inner nanoscale pores driven by twisting, rotation, buckling and bending of pore walls contributes to the large deformation.

36 MATERIALS SCIENCE↗

Local structure of ion pair interaction in lapatinib amorphous dispersions characterized by synchrotron x-ray diffraction and pair distribution function analysis

For many years, the idea of analyzing atom-atom contacts in amorphous drug-polymer systems has been of major interest, because this method has always had the potential to differentiate between amorphous systems with domains and amorphous systems which are molecular mixtures. In this study, local structure of ionic and noninonic interactions were studied by High-Energy X-ray Diffraction and Pair Distribution Function (PDF) analysis in amorphous solid dispersions of lapatinib in hypromellose phthalate (HPMCP) and hypromellose (HPMC-E3). The strategy of extracting lapatinib intermolecular drug interactions from the total PDF x-ray pattern was successfully applied allowing the detection of distinct nearest neighbor contacts for the HPMC-E3 rich preparations showing that lapatinib molecules do not cluster in the same way as observed in HPMC-P, where ionic interactions are present. Orientational correlations up to nearest neighbor molecules at about 4.3 Å were observed for polymer rich samples; both observations showed strong correlation to the stability of the systems. Lasty, the superior physical stability of 1:3 LP:HPMCP was consistent with the absence of significant intermolecular interactions in (ΔD inter LP (r)) in the range of 3.0 to 6.0 Å, which are attributed to C-C, C-N and C-O nearest neighbor contacts present in drug-drug interactions.

36 MATERIALS SCIENCE↗

Oxygen vacancy and hole conduction in amorphous TiO 2

The amorphous titanium dioxide (a-TiO2) has drawn attention recently due to the finding that it holds promise for coating conventional photoelectrodes for corrosion protection while still allowing the holes to transport to the surface. The mechanism of hole conductivity at a level much higher than the edge of the valence band is still a mystery. In this work, an amorphous TiO2 model is obtained from molecular dynamics employing the “melt-and-quench” technique. The electronic properties, polaronic states and the hole conduction mechanism in amorphous structure were investigated by means of density functional theory with Hubbard's energy correction (DFT + U) and compared to those in crystalline (rutile) TiO2. The formation energy of the oxygen vacancy was found to reduce significantly (by a few eV) upon amorphization. Our theoretical study suggested that the oxygen vacancies and their defect states provide hopping channels, which are comparable to experimental observations and could be responsible for hole conduction in the “leaky” TiO2 recently discovered for the photochemical water-splitting applications.

Marcus theory↗

Deformation behavior of an amorphous zeolitic imidazolate framework – from a supersoft material to a complex organometallic alloy

Zeolitic imidazolate frameworks (ZIFs)—a subset of metal–organic frameworks (MOFs)—have recently attracted immense attention. Many crystalline ZIFs (c-ZIFs) have highly porous zeolite structures that are ideal for molecular encapsulation. Recently emerging non-crystalline or amorphous ZIFs (a-ZIFs) with a similar short-range order are of interest because they can be converted from c-ZIFs for large-scale production. Here, we present a computational study of the deformation behavior of a unique a-ZIF model by simulating step-wise compression and expansion with strains between –0.389 and +0.376. An insulator-to-metal transition is observed at 51 GPa leading to a multicomponent light amorphous alloy of only 3.68 g (cm) –3 . A high-density amorphous-to-amorphous phase transition is observed due to the sudden formation of N–N bond pairs. Here, the systematic expansion of the a-ZIF retains the framework softness until it fractures at high strain. Based on the expansion data, we propose an empirical formula for super-soft materials, which is in line with available experimental data.

36 MATERIALS SCIENCE↗

Giant spontaneous polarization for enhanced ferroelectric properties of biaxially oriented poly(vinylidene fluoride) by mobile oriented amorphous fractions

Poly(vinylidene fluoride) (PVDF) and its random copolymers exhibit the most distinctive ferroelectric properties; however, their spontaneous polarization (60–105 mC m -2 ) is still inferior to those (>200 mC m -2 ) of the ceramic counterparts. In this work, we report an unprecedented spontaneous polarization ( P s = 140 mC m -2 ) for a highly poled biaxially oriented PVDF (BOPVDF) film, which contains a pure β crystalline phase. Given the crystallinity of ~0.52, the P s for the β phase ( P s,β ) is calculated to be 279 mC m -2 , if a simple two-phase model of semicrystalline polymers is assumed. This high P s,β is invalid, because the theoretical limit of P s,β is 185 mC m -2 , as calculated by density functional theory. To explain such a high P s for the poled BOPVDF, a third component in the amorphous phase must participate in the ferroelectric switching to contribute to the P s . Namely, an oriented amorphous fraction (OAF) links the lamellar crystal and the mobile amorphous fraction. From the hysteresis loop study, the OAF content was determined to be ~0.28, more than 50% of the amorphous phase. Because of the high polarizability of the OAFs, the dielectric constant of the poled BOPVDF reached nearly twice the value of conventional PVDF. Overall, the fundamental knowledge obtained from this study will provide a solid foundation for the future development of PVDF-based high performance electroactive polymers for wearable electronics and soft robotic applications.

36 MATERIALS SCIENCE↗

Diffusion barrier properties of amorphous and nanocrystalline Ta films for Cu interconnects

In the present paper, the diffusion barrier properties of amorphous and nanocrystalline (NC) Ta films, and the interface microstructure of Ta/Cu were investigated as a function of annealing temperature. X-ray diffraction, scanning electron microscopy, cross-sectional transmission electron microscopy, and energy-dispersive spectrometer line scans were employed to study the microstructure evolution and diffusion behavior. It was found that an amorphous layer with a thickness of approx5 nm formed at the interface of NC Ta/Cu at 450 deg. C annealing, while the interface of amorphous-Ta/Cu was still abrupt. Moreover, amorphous-Ta film acts as an effective diffusion barrier up to temperatures of 650 deg. C, which is higher than that for NC-Ta film. The fast diffusion along grain boundaries inside NC-Ta films is suggested to be responsible for the main failure of NC-Ta film.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Viscosity on the Microformability of Bulk Amorphous Alloy in Supercooled Liquid Region

Previously published results have shown that viscosity greatly influences on the deformation behavior of the bulk amorphous alloy in supercooled liquid region during microforming process. And viscosity is proved to be a component of the evaluation index which indicating microformability. Based on the fluid flow theory and assumptions, bulk amorphous alloy can be regarded as the viscous materials with a certain viscosity. It is helpful to understand how the viscosity plays an important role in viscous materials with various viscosities by numerical simulation on the process. Analysis is carried out by linear state equation in FEM with other three materials, water, lubricant oil and polymer melt, whose viscosities are different obviously. The depths of the materials flow into the U-shaped groove during the microimprinting process are compared in this paper. The result shows that the deformation is quite different when surface tension effect is not considered in the case. With the lowest viscosity, water can reach the bottom of micro groove in a very short time. Lubricant oil and polymer melt slower than it. Moreover bulk amorphous alloys in supercooled liquid state just flow into the groove slightly. Among the alloys of different systems including Pd-, Mg- and Zr-based alloy, Pd-based alloy ranks largest in the depth. Mg-based alloy is the second. And Zr-based alloy is the third. Further more the rank order of the viscosities of the alloys is Pd-, Mg- and Zr-based. It agrees well with the results of calculation. Therefore viscosity plays an important role in the microforming of the bulk amorphous alloy in the supercooled liquid state.

36 MATERIALS SCIENCE↗

Amorphous Interface Layer in Thin Graphite Films Grown on the Carbon Face of SiC

Cross-sectional transmission electron microscopy (TEM) is used to characterize an amorphous layer observed at the interface in graphite and graphene films grown via thermal decomposition of C-face 4H-SiC. The amorphous layer does not cover the entire interface, but uniform contiguous regions span microns of cross-sectional interface. Scanning transmission electron microscopy (STEM) images and electron energy loss spectroscopy (EELS) demonstrate that the amorphous layer is a carbon-rich composition of Si/C. The amorphous layer is clearly observed in samples grown at 1600 C for a range of growth pressures in argon, but not at 1500 C, suggesting a temperature-dependent formation mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced magnetic and electrical properties in amorphous Ge:Mn thin films by non-magnetic codoping

Amorphous Ge{sub 1-x}Mn{sub x} thin films have been prepared by co-depositing Ge and Mn on SiO{sub 2}/Si using an ultrahigh vacuum molecular beam epitaxy system. Across a range of growth temperatures and Mn concentrations (2.8 at. %, 10.9 at. %, and 21.3 at. %), we achieved enhanced magnetic and electrical properties with non-magnetic codopants dispersed in the films. Self-assembled Mn-rich amorphous nanostructures were observed in the amorphous Ge matrix, either as isolated nanoclusters or as nanocolumns, depending on Mn concentration. The ferromagnetic saturation moments were found to increase with Mn concentration and reached a maximum of 0.7 {mu}{sub B}/Mn in the as-grown samples. Two magnetic transition temperatures around 15 K and 200 K were observed in these amorphous MBE-grown samples. Coercivity is considered within the context of local magnetic anisotropy. The anomalous Hall effect confirmed a strong correlation between the magnetization and transport properties, indicating that global ferromagnetic coupling was carrier-mediated rather than through direct exchange. In addition, negative magnetoresistance was detected from 5 K to room temperature.

36 MATERIALS SCIENCE↗

Arsenic redistribution after solid phase epitaxial regrowth of shallow pre-amorphized silicon layers

The behavior of ultra shallow ion implants of arsenic in Si following solid phase epitaxial re-growth process is reported. A 16 nm amorphous layer was created by ion implantation of Si{sup +} at energy 5 keV and a dose 1 Multiplication-Sign 10{sup 15} at/cm{sup 2}. As ion were implanted at 2 keV using 3 different doses: 1 Multiplication-Sign 10{sup 14}, 5 Multiplication-Sign 10{sup 14} and 1 Multiplication-Sign 10{sup 15} at/cm{sup 2}. The resulting As distributions, confined in the amorphous layer, were thermally treated at 550 Degree-Sign C for 5-300 s in order to electrically activate dopant atoms. Crystal re-growth and As redistribution was investigated by secondary ion mass spectrometry and medium energy ion scattering. A growth rate depending on the As concentration was observed, the rate being slower for higher As content. Arsenic re-distribution to the surface and at the end-of-range defects was observed and a segregation model was developed. Finally, the substitutional fraction of As atoms was related to sheet resistance measurements revealing a higher fraction of electrically active dopant atoms in pre-amorphized samples compared to not pre-amorphized.

36 MATERIALS SCIENCE↗

Local structure of amorphous GaN{sub 1-x}As{sub x} semiconductor alloys across the composition range

Typically only dilute (up to {approx}10%) highly mismatched alloys can be grown due to the large differences in atomic size and electronegativity of the host and the alloying elements. We have overcome the miscibility gap of the GaN{sub 1-x}As{sub x} system using low temperature molecular beam epitaxy. In the intermediate composition range (0.10 < x < 0.75), the resulting alloys are amorphous. To gain a better understanding of the amorphous structure, the local environment of the As and Ga atoms was investigated using extended x-ray absorption fine structure (EXAFS). The EXAFS analysis shows a high concentration of dangling bonds compared to the crystalline binary endpoint compounds of the alloy system. The disorder parameter was larger for amorphous films compared to crystalline references, but comparable with other amorphous semiconductors. By examining the Ga local environment, the dangling bond density and disorder associated with As-related and N-related bonds could be decoupled. The N-related bonds had a lower dangling bond density and lower disorder.

36 MATERIALS SCIENCE↗