Search NASA⌕ Search

SEARCH · Search NASA

Results for “Analytical Method Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Chemiluminescent measurement of atmospheric acid

The design and construction of a gas phase acid sensitive analyzer are reported. These studies showed that the chemical system was a practical analytical method. A complete instrument was developed and prepared for field testing. A Titan 3-C rocket was scheduled for launching on February 11, 1974. Through preparations made by NASA Langley the instrument was set up to monitor the acid concentration in the rocket exhaust. Due to adverse wind conditions no acid was detected. This entire trip is described in detail.

Stedman, D. H.↗

Combustion instability with partial length acoustic liners

The development of analytical techniques and numerical methods for the prediction of the stability behavior of liquid propellant rocket combustors is discussed. The studies involved nonlinear wave propagation effects and nonlinear combustion zone, liner, and nozzle responses. A second primary extension of the basic theory was directed at the inclusion of the effects of injector face baffles. Attention was restricted to the linear (small amplitude) problem, finite Mach numbers, three dimensional oscillations, and distributed combustion effects.

Mitchell, C. E.↗

NASA research objectives and roles

A chronology of airfoil development is presented in order to put the present NASA airfoil program in perspective. The impact of the NACA series airfoils is considered. Development of advanced analytical and experimental methods for the design and for the determination of the characteristics of not only single element airfoils, but of multielement airfoil combinations used in aerodynamic controls and high lift systems is emphasized along with applications.

Gessow, A.↗

A study of the lifetimes of geosynchronous transfer orbits

The study concerns the orbit lifetimes of spent upper stages that are used to boost NASA Space Transportation System payloads into geosynchronous transfer orbits. A semi-analytical method of trajectory computation was developed and applied to these particular orbits. It was found that gravitational perturbations of the sun, moon and oblate earth cause large changes in the perigee altitude. The following parameters have a strong influence on orbit lifetimes: Time of year of launch; Inertial orientation of orbital plane; Inclination of orbital plane.

Graf, O. F., Jr.↗

Propeller flow visualization techniques

Propeller flow visualization techniques were tested. The actual operating blade shape as it determines the actual propeller performance and noise was established. The ability to photographically determine the advanced propeller blade tip deflections, local flow field conditions, and gain insight into aeroelastic instability is demonstrated. The analytical prediction methods which are being developed can be compared with experimental data. These comparisons contribute to the verification of these improved methods and give improved capability for designing future advanced propellers with enhanced performance and noise characteristics.

Stefko, G. L.↗

Quasi-Lagrangian models of nascent thermals

Slab-symmetric and axisymmetric geometries are considered in the modeling of thermals by considering their boundaries as self-advecting vortex sheets, for the case of a neutral environment without turbulent processes. The initial accelerations for circular cross section thermals are obtained analytically, and a numerical method is developed to simulate the evolution of thermals by time-marching in which the vortex sheet is divided into finite segments whose positions are tracked in a quasi-Lagrangian fashion. Self-advection is considered, and a redistribution procedure is adopted to prevent the segments from bunching unmanageably. The induced field of motion is determined both inside and outside the thermal. It is shown that (1) the axisymmetric thermal rises more quickly than the slab-symmetric thermal, (2) vorticity maxima occur both within the concavities and on the trailing edges, and (3) the leading edges are very smooth.

Rambaldi, S.↗

Three-dimensional Stress Analysis Using the Boundary Element Method

The boundary element method is to be extended (as part of the NASA Inelastic Analysis Methods program) to the three-dimensional stress analysis of gas turbine engine hot section components. The analytical basis of the method (as developed in elasticity) is outlined, its numerical implementation is summarized, and the approaches to be followed in extending the method to include inelastic material response indicated.

Wilson, R. B.↗

Parallel solution of sparse one-dimensional dynamic programming problems

Parallel computation offers the potential for quickly solving large computational problems. However, it is often a non-trivial task to effectively use parallel computers. Solution methods must sometimes be reformulated to exploit parallelism; the reformulations are often more complex than their slower serial counterparts. We illustrate these points by studying the parallelization of sparse one-dimensional dynamic programming problems, those which do not obviously admit substantial parallelization. We propose a new method for parallelizing such problems, develop analytic models which help us to identify problems which parallelize well, and compare the performance of our algorithm with existing algorithms on a multiprocessor.

Nicol, David M.↗

Discourse for slide presentation: An overview of chemical detection systems

A brief overview of some of the analytical techniques currently used in monitoring and analyzing permanent gases and selected volatile organic compound in air are presented. Some of the analytical considerations in developing a specific method are discussed. Four broad groups of hardware are discussed: compound class specific personal monitors, gas chromatographic systems, infrared spectroscopic systems, and mass spectrometric residual gas analyzer systems. Three types of detectors are also discussed: catalytic sensor based systems, photoionization detectors, and wet or dry chemical reagent systems. Under gas chromatograph based systems five detector systems used in combination with a GC are covered: thermal conductivity detectors, photoionization detectors, Fourier transform infrared spectrophotometric systems, quadrapole mass spectrometric systems, and a relatively recent development, a surface acoustic wave vapor detector.

Peters, Randy Alan↗

NASA Li/CF(x) cell problem analysis: Anion exchange chromatography analysis

An analysis was made of wiper samples used to wipe down lithium/chlorine fluorine battery components and production equipment. These components and equipment were potentially exposed to thionyl chloride vapors. In the presence of moisture, thionyl chloride decomposes to sulfur dioxide and hydrogen chloride. The wiper samples were analyzed for soluble chlorides and fluorides by anion exchange chromatography. During the examination of the test chromatographs, fluoride contamination was discovered in wiper samples from the test equipment. An analytical method to determine fluoride was developed. The first 3 extracts from the potentially exposed and clean wiper samples were tested, and the total fluoride from both groups determined. A comparison of the results from both groups was made to determine the extent of fluoride contamination.

Bytella, Joseph↗

Triple flames in microgravity flame spread

The purpose of this project is to examine in detail the influence of the triple flame structure on the flame spread problem. It is with an eye to the practical implications that this fundamental research project must be carried out. The microgravity configuration is preferable because buoyancy-induced stratification and vorticity generation are suppressed. A more convincing case can be made for comparing our predictions, which are zero-g, and any projected experiments. Our research into the basic aspects will employ two models. In one, flows of fuel and oxidizer from the lower wall are not considered. In the other, a convective flow is allowed. The non-flow model allows us to develop combined analytical and numerical solution methods that may be used in the more complicated convective-flow model.

Wichman, Indrek S.↗

Transient Analysis Used to Study Thermal Radiation Effects in Single and Composite Semitransparent Layers

In a continuing in-house program at the NASA Lewis Research Center, analytical and numerical methods are being developed to apply radiative analysis to predict transient temperature distributions and heat flows in partially transmitting materials. Results have been obtained for a single plane layer, and a transient analysis is being developed for a two-layer composite where each layer has a different refractive index. Because the ceramic refractive indices are larger than one, internal reflections are produced at the surfaces and at the internal interface. Reflections tend to distribute energy within a layer, and this affects the transient temperature distributions.

Source record↗

Modeling the Multi-Body System Dynamics of a Flexible Solar Sail Spacecraft

Solar sail propulsion systems enable a wide range of space missions that are not feasible with current propulsion technology. Hardware concepts and analytical methods have matured through ground development to the point that a flight validation mission is now realizable. Much attention has been given to modeling the structural dynamics of the constituent elements, but to date an integrated system level dynamics analysis has been lacking. Using a multi-body dynamics and control analysis tool called TREETOPS, the coupled dynamics of the sailcraft bus, sail membranes, flexible booms, and control system sensors and actuators of a representative solar sail spacecraft are investigated to assess system level dynamics and control issues. With this tool, scaling issues and parametric trade studies can be performed to study achievable performance, control authority requirements, and control/structure interaction assessments.

Kim, Young↗

3D GeoWall Analysis System for Shuttle External Tank Foreign Object Debris Events

An analytical, advanced imaging method has been developed for the initial monitoring and identification of foam debris and similar anomalies that occur post-launch in reference to the space shuttle s external tank (ET). Remote sensing technologies have been used to perform image enhancement and analysis on high-resolution, true-color images collected with the DCS 760 Kodak digital camera located in the right umbilical well of the space shuttle. Improvements to the camera, using filters, have added sharpness/definition to the image sets; however, image review/analysis of the ET has been limited by the fact that the images acquired by umbilical cameras during launch are two-dimensional, and are usually nonreferenceable between frames due to rotation translation of the ET as it falls away from the space shuttle. Use of stereo pairs of these images can enable strong visual indicators that can immediately portray depth perception of damaged areas or movement of fragments between frames is not perceivable in two-dimensional images. A stereoscopic image visualization system has been developed to allow 3D depth perception of stereo-aligned image pairs taken from in-flight umbilical and handheld digital shuttle cameras. This new system has been developed to augment and optimize existing 2D monitoring capabilities. Using this system, candidate sequential image pairs are identified for transformation into stereo viewing pairs. Image orientation is corrected using control points (similar points) between frames to place the two images in proper X-Y viewing perspective. The images are then imported into the WallView stereo viewing software package. The collected control points are used to generate a transformation equation that is used to re-project one image and effectively co-register it to the other image. The co-registered, oriented image pairs are imported into a WallView image set and are used as a 3D stereo analysis slide show. Multiple sequential image pairs can be used to allow forensic review of temporal phenomena between pairs. The observer, while wearing linear polarized glasses, is able to review image pairs in passive 3D stereo.

Brown, Richard↗

Computer-developed construction of analytic expressions for the coordinates and partial derivatives of Jupiter's Galilean satellites

A method for improving Sampson's (1910, 1912, 1921) original work in developing series expressions for accurate coordinates of the Galilean satellites is discussed. The method, which utilizes computer-based algebraic manipulation software, was developed to reconstruct Sampson's theory, remove existing errors, introduce neglected effects, and provide analytic expressions for the coordinates as well as for the partial derivatives with respect to orbital parameters, Jupiter's mass and oblateness, the satellite masses, and Jupiter's pole and rotation period. The software system, capable of handling Poisson series with up to 73 polynomial variables and 28 trigonometric arguments, is described. The preliminary solution is presented, and procedures are outlined for calculating perturbations and eliminating auxiliary parameters.

Lieske, J. H.↗

An analytic treatment of gravitational microlensing for sources of finite size at large optical depths

Statistical methods are developed for gravitational lensing in order to obtain analytic expressions for the average surface brightness that include the effects of microlensing by stellar (or other compact) masses within the lensing galaxy. The primary advance here is in utilizing a Markoff technique to obtain expressions that are valid for sources of finite size when the surface density of mass in the lensing galaxy is large. The finite size of the source is probably the key consideration for the occurrence of microlensing by individual stars. For the intensity from a particular location, the parameter which governs the importance of microlensing is determined. Statistical methods are also formulated to assess the time variation of the surface brightness due to the random motion of the masses that cause the microlensing.

Deguchi, Shuji↗

Analytical Modeling of Planetary Excavation for in Situ Resource Utilization

The space-faring capabilities of humans are dependent on the ability to interact with plan-etary surfaces safely and efficiently and utilize local re-sources. Since planetary regolith will be the primary feedstock for in situ resource utilization (ISRU) and infrastructure development activities [1,2], the site-specific geomechanical properties must be understood to optimize excavation operations [3]. Excavating planetary regolith is challenging due to its unique geomechanical properties, 1/6th G reduced gravity extreme conditions, and limited energy resources. Therefore, it is critical to develop technologies that reduce excavation force requirements and minimize tool path inefficiencies to save time and energy during planetary re-source acquisition and infrastructure development [3]. There have been several experimental investigations of methods to optimize planetary excavations [4,5], but none developed predictive capabilities. This abstract presents a simple analytical method that will be used to model laboratory and mission excavation data. Future work will build on the simple analytical method here to include high-fidelity numerical simulations of planetary excavation mechanics.

Regolith↗

Event Definition for the Automated Detection of Nuclear Proliferation Activities

In FY2020, Savannah River National Laboratory (SRNL) in collaboration with the Discovery Analytics Center (DAC) at Virginia Polytechnic Institute and State University (VT) began developing a demonstration prototype system that uses multiple machine learning and data analytic methods on largescale open data sources to identify new, developing, or undeclared nuclear programs. One of the most challenging aspects of applying machine learning techniques to such a problem is the high likelihood of extremely sparse data from disparate sources. To overcome this challenge, the current work will use a strategic combination of supervised, semi-supervised, and unsupervised learning techniques to ingest and fuse data streams to make a forecast of nuclear activities in a targeted geospatial location. Identifying potential data sources and training supervised learning algorithms is dependent upon the development of a robust foundation of targeted event domains that fundamentally define the nuclear activities of interest. This report documents the definition of a hierarchical structure for both nuclear activity and event domains that will be used to guide the research team in development or use of existing semantic dictionaries that are instrumental to searching, parsing, and categorizing events for the forecasting system’s use.

97 MATHEMATICS AND COMPUTING↗