SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Pfeffer matrix method for calculating wave propagation in nonisothermal atmospheres, noting acoustic gravity wave ducting in atmosphere by vertical temperature structure
Anomalies and trends of outgoing longwave radiation (OLR) serve as important indicators of climate change. Several satellite based instruments currently provide information related to OLR. CERES, on board the EOS Aqua and Terra satellites, contains broad band radiometers that measure total flux and short-wave flux, from which OLR is determined. AIRS is a high spectral resolution IR sounder on EOS Aqua that measures IR radiances covering most of the spectral interval 650 cm-1 to 2670 cm-1. These observations enable the determination of detailed information about atmospheric temperature, moisture, and ozone profiles, as well as surface skin temperatures and cloud parameters. The AIRS OLR product is the total flux over the spectral interval 2 cm-1 to2750 cm-1 computed for the surface and atmospheric state determined from AIRS observations. We compared spatial anomalies and trends of OLR, over the seven year period September 2002 through August 2009, as observed by CERES and computed using Version 5 AIRS products. These two sets of OLR anomalies and trends, obtained in very different ways, agree with each other almost perfectly in essentially every detail. This important finding shows that a very stable high spectral infra-red sounder such as AIRS corroborates the anomalies and trends of OLR obtained from CERES. More significantly, anomalies and trends of the individual geophysical parameters derived from AIRS explain the detailed causes of the anomalies and trends of CERES OLR. Both sets of results show that global mean OLR has been decreasing at a rate of 0.12 W/m2/yr over the seven year time period under study. Both also confirm that the primary cause of this is due to changes in the tropics, in which OLR has been decreasing at a rate of 0.27 W/m2/yr. AIRS products show that the decrease of tropical OLR is a result of increasing tropical atmospheric water vapor and cloud cover over the time period studied, which in turn is responding to a very strong E1 Nino/ La Nina cycle. Equatorial ocean temperatures between 160E and 120W cooled considerably during this time period, with corresponding local decreases in mid-tropospheric humidity and cloud cover, resulting in increases in local OLR. This was more than compensated by substantial increases in water vapor and cloud cover elsewhere in the tropics, resulting in a net decrease in tropical OLR.
Atmospheric temperature measurement at three heights with thin wire thermocouples on the 1.1 m Mars Pathfinder meteorology must allow estimates of the integral scale of the atmospheric thermal turbulence during an 83 sol period that begins in the summer. The integral scale is a measure for regions of perturbations. In turbulent media that roughly characterizes locations where the perturbations are correlated. Excluding some to intervals with violent excursions of the mean temperatures, integral scale values are found that increase relatively rapidly from a few tenths meters or less near down to several meters by mid-morning. During mid-morning, the diurnal and shorter time scale wind direction variations often place the meteorology mast in the thermal wake of the Lander.
The paper is concerned with errors in temperature retrieval caused by incorrectly assuming that surface emissivity is equal to unity. An error equation that applies to present-day atmospheric temperature sounders is derived, and the bias errors resulting from various emissivity discrepancies are calculated. A model of downward flux is presented and used to determine the effective downward flux. In the 3.7-micron region of the spectrum, emissivities of 0.6 to 0.9 have been observed over land. At a surface temperature of 290 K, if the true emissivity is 0.6 and unit emissivity is assumed, the error would be approximately 11 C. In the 11-micron region, the maximum deviation of the surface emissivity from unity was 0.05.
We report airborne measurements of atmospheric pressure made using an integrated path differential absorption (IPDA) lidar that operates in the oxygen A-band near 765 nm. Remote measurements of atmospheric temperature and pressure are needed for NASA s Active Sensing of CO2 Emissions Over Nights, Days, and Seasons (ASCENDS) mission to measure atmospheric CO2. Accurate measurements of tropospheric CO2 on a global scale are very important in order to better understand its sources and sinks and to improve our predictions of climate change. The goal of ASCENDS is to determine the CO2 dry mixing ratio with lidar measurements from space at a level of ~1 ppm. Analysis to date shows that with current weather models, measurements of both the CO2 column density and the column density of dry air are needed. Since O2 is a stable molecule that uniformly mixed in the atmosphere, measuring O2 absorption in the atmosphere can be used to infer the dry air density. We have developed an airborne (IPDA) lidar for Oxygen, with support from the NASA ESTO IIP program. Our lidar uses DFB-based seed laser diodes, a pulsed modulator, a fiber laser amplifier, and a non-linear crystal to generate wavelength tunable 765 nm laser pulses with a few uJ/pulse energy. The laser pulse rate is 10 KHz, and average transmitted laser power is ~20 mW. Our lidar steps laser pulses across a selected line O2 doublet near 764.7 nm in the Oxygen A-band. The direct detection lidar receiver uses a 20 cm diameter telescope, a Si APD detector in Geiger mode, and a multi-channel scalar to detect and record the time resolved laser backscatter in 40 separate wavelength channels. Subsequent analysis is used to estimate the transmission line shape of the doublet for the laser pulses reflected from the ground. Ground based data analysis allows averaging from 1 to 60 seconds to increase SNR in the transmission line shape of the doublet. Our retrieval algorithm fits the expected O2 lineshapes against the measurements and determines the atmospheric pressure by minimizing the error between the observations and model. We first demonstrated our airborne lidar during flights during summer 2010. We made several improvements and made measurements during the Ascends flights during July 2011. More information about the technique, lidar instrument, airborne measurements, and pressure estimates will be described in the presentation.
Existing measurements and modeling studies indicate that the climate and general circulation of the thin, predominately CO2 Martian atmosphere are characterized by large-amplitude variations with a wide range of spatial and temporal scales. Remote sensing observations from Earth-based telescopes and the Mariner 9, Viking, Phobos, and Mars Global Surveyor (MGS) orbiters show that the prevailing climate includes large-scale seasonal variations in surface and atmospheric temperatures (140 to 300 K), dust optical depth (0.15 to 1), and water vapor (10 to 100 precipitable microns). These observations also provided the first evidence for episodic regional and global dust storms that produce even larger perturbations in the atmospheric thermal structure and general circulation. In-situ measurements by the Viking and Mars Pathfinder Landers reinforced these conclusions, documenting changes in the atmospheric pressure on diurnal (5%) and seasonal (>20%) time scales, as well as large diurnal variations in the near-surface temperature (40 to 70 K), wind velocity (0 to 35 m/s), and dust optical depth (0.3 to 6). These in-situ measurements also reveal phenomena with temporal and spatial scales that cannot be resolved from orbit, including rapid changes in near-surface temperatures (+/- 10 K in 10 seconds), large near-surface vertical temperature gradients (+/- 15 K/meter), diurnally-varying slope winds, and dust devils . Modeling studies indicate that these changes are forced primarily by diurnal and seasonal variations in solar insolation, but they also include contributions from atmospheric thermal tides, baroclinic waves (fronts), Kelvin waves, slope winds, and monsoonal flows from the polar caps.
The Nimbus 7 Limb Infrared Monitor of theStratosphere (LIMS) instrument operated from 25 Octo-ber 1978 through 28 May 1979. Its version 6 (V6) profileswere processed and archived in 2002. We present severaldiagnostic examples of the quality of the V6 stratospheric species distributions based on their level 3 zonal Fourier co-efficient products. In particular, we show that there are smalldifferences in the ascending (A) minus descending (D) or-bital temperature–pressure orT(p) profiles (theirA−Dval-ues) that affect (A−D) species values. SystematicA−Dbi-ases inT(p) can arise from small radiance biases and/or fromviewing anomalies along orbits. There can also be (A−D)differences inT(p) due to not resolving and correcting forall of the atmospheric temperature gradient along LIMS tan-gent view-paths. An error inT(p) affects species retrievalsthrough (1) the Planck blackbody function in forward calcu-lations of limb radiance that are part of the iterative retrievalalgorithm of LIMS, and (2) the registration of the measuredLIMS species radiance profiles in pressure altitude, mainlyfor the lower stratosphere. There are clearA−Ddifferencesfor ozone, H2O, and HNO3but not for NO2. Percentage differences are larger in the lower stratosphere for ozone andH2O because those species are optically thick. We evaluateV6 ozone profile biases in the upper stratosphere with the aid of comparisons against a monthly climatology of UV–ozone soundings from rocketsondes. We also provide resultsof time series analyses of V6 ozone, H2O, and potential vor-ticity for the middle stratosphere to show that their average(A+D) V6 level 3 products provide a clear picture of the evolution of those tracers during Northern Hemisphere win-ter. We recommend that researchers use the average V6 level3 product for their science studies of stratospheric ozone andH2O, while keeping in mind that there are uncorrected non-local thermodynamic equilibrium effects in daytime ozone inthe lower mesosphere and in daytime H2O in the uppermoststratosphere. We also point out that the present-day Soundingof the Atmosphere using Broadband Emission Radiometry(SABER) experiment provides measurements and retrievalsof temperature and ozone that are nearly free of anomalousdiurnal variations and of effects from gradients at low and middle latitudes.
A description is given of conditions of atmospheric temperature and relative humidity under which hydrochloric acid aerosol is expected upon interaction of the proposed space shuttle rocket exhaust products with the atmosphere.
Several approaches to infrared multichannel sea surface temperature retrievals propose using a universal set of constants. It is shown that the single-channel multiangle technique (i.e., GOES and NOAA) and the multichannel single-angle technique (NOAA-n) are similar concepts with a common derivation from radiative transfer theory. It is also shown that the linear correlation factor between surface temperature minus satellite temperature in one channel versus the difference in satellite temperatures in two channels is not independent of the difference in satellite sensed equivalent blackbody temperature. The 3.7-micron, 11-micron, and 12-micron channels on the NOAA-n AVHRR can be used in combination to compute atmospheric transmissivity and average atmospheric temperature, but a better combination would be substituting three 0.5-micron-wide channels centered on 11.25 micron, 11.75 micron, and 12.25 micron. A triple window multispectral scanner in the 11-12.5 micron region allows determination of diffuse surface reflectance which can bias sea surface temperatures - 0.4 K + or - 0.3 K.
The temperature and moisture regimes in a forest are key components in the forest ecosystem dynamics. Observations and studies indicate that the internal temperature distribution and moisture content of the tree influence not only growth and development, but onset and cessation of cambial activity [1], resistance to insect predation[2], and even affect the population dynamics of the insects [3]. Moreover, temperature directly affects the uptake and metabolism of population from the soil into the tree tissue [4]. Additional studies show that soil and atmospheric temperatures are significant parameters that limit the growth of trees and impose treeline elevation limitation [5]. Directional thermal infrared radiance effects have long been observed in natural backgrounds [6]. In earlier work, we illustrated the use of physically-based models to simulate directional effects in thermal imaging [7-8]. In this paper, we illustrated the use of physically-based models to simulate directional effects in thermal, and net radiation in a adeciduous forest using our recently developed three-dimensional, macro-scale computational tool that simulates the heat and mass transfer interaction in a soil-root-stem systems (SRSS). The SRSS model includes the coupling of existing heat and mass transport tools to stimulate the diurnal internal and external temperatures, internal fluid flow and moisture distribution, and heat flow in the system.
A preliminary design study is presented for the Lidar Atmospheric Sounder and Altimeter (LASA), an active remote sensor for the Earth Observing System. LASA is designed to measure the global vertical distributions of aerosols, cloud top heights, atmospheric trace gases, atmospheric temperature and pressure, and the height of the PBL. The measurements are made using optical radar, differential absorption lidar, and laser altimetry. An experiment proposed for the LASA facility, the EOS Atmospheric Global Lidar Experiment (EAGLE) is described in detail. The EAGLE program is planned to determine aerosol and cloud distributions, water vapor concentrations, and temperature profiles over the troposphere and aerosol distribution over the stratosphere. The measurement techniques, receiver system, and transmitter for the EAGLE program are examined and the conceptual design of the EAGLE experiment and the LASA/EAGLE interface is outlined.
Radar application of the radio-acoustic sounding technique uses the Doppler frequency shift of radar echoes returning from the atmospheric wave structure, in association with a traveling acoustic pulse transmitted from the ground, to determine the speed of sound, and hence the atmospheric temperature, as a function of altitude. Temperature measurement in the troposphere and stratosphere were determined using the radio-acoustic sounding technique with the Radio-Acoustic Sounding System (RASS). Successful experiments were performed in March 1985, and in August 1985.
A FORTRAN computer program called THERMTRAJ is presented which can be used to compute the trajectory of high altitude scientific zero pressure balloons from launch through all subsequent phases of the balloon flight. In addition, balloon gas and film temperatures can be computed at every point of the flight. The program has the ability to account for ballasting, changes in cloud cover, variable atmospheric temperature profiles, and both unconditional valving and scheduled valving of the balloon gas. The program was verified for an extensive range of balloon sizes (from 0.5 to 41.47 million cubic feet). Instructions on program usage, listing of the program source deck, input data and printed and plotted output for a verification case are included.
This is the Calibration Management Plan for the Earth Observing System/Advanced Microwave Sounding Unit-A (AMSU-A). The plan defines calibration requirements, calibration equipment, and calibration methods for the AMSU-A, a 15 channel passive microwave radiometer that will be used for measuring global atmospheric temperature profiles from the EOS polar orbiting observatory. The AMSU-A system will also provide data to verify and augment that of the Atmospheric Infrared Sounder.
This is the final report for NASA grant NAG-1-02057/University of Wisconsin-Madison/Dr. Henry E Revercomb, PI. This grant supported the University of Wisconsin-Madison participation in the International Water-Vapor Project (IHOP) experiment in May-June 2002. The upwelling thermal infrared emission from the surface and atmosphere over the U. S. Southern Great Plains was obtained from the NASA DC-8 with the Scanning High-resolution Interferometer Sounder (S-HIS) instrument, Analysis of the S-HIS radiances were used to obtain atmospheric temperature profiles below the aircraft. In a complementary manner, the downwelling thermal infrared emission at the surface was obtained by the University of Wisconsin Atmospheric Emitted Radiance Interferometer (AERI) instrument from a mobile research vehicle and used to profile the atmospheric boundary layer at the Homestead site. This report summarizes the observations of the S-HIS and AERI instruments during IHOP including validation against in situ observations.
Propagation characteristics for varying wind and temperature atmospheric conditions are identified using physically-limiting propagation angles to define shadow boundary regions. These angles are graphically illustrated for various wind and temperature cases using a newly developed ray-tracing propagation code.
This article combined several infrared datasets to study the vertical properties of Saturn's northern springtime storm. Spectroscopic observations of Saturn's northern hemisphere at 0.5 and 2.5 / cm spectral resolution were provided by the Cassini Composite Infrared Spectrometer (CIRS, 17). These were supplemented with narrow-band filtered imaging from the ESO Very Large Telescope VISIR instrument (16) to provide a global spatial context for the Cassini spectroscopy. Finally, nightside imaging from the Cassini Visual and Infrared Mapping Spectrometer (VIMS, 22) provided a glimpse of the undulating cloud activity in the eastern branch of the disturbance. Each of these datasets, and the methods used to reduce and analyse them, will be described in detail below. Spatial maps of atmospheric temperatures, aerosol opacity and gaseous distributions are derived from infrared spectroscopy using a suite of radiative transfer and optimal estimation retrieval tools developed at the University of Oxford, known collectively as Nemesis (23). Synthetic spectra created from a reference atmospheric model for Saturn and appropriate sources of spectroscopic line data (6, 24) are convolved with the instrument function for each dataset. Atmospheric properties are then iteratively adjusted until the measurements are accurately reproduced with physically-realistic temperatures, compositions and cloud opacities.
The radiative transfer model (RTMs) has a wide range of applications in satellite remote sensing and atmospheric radiation applications. However, millions of line-by-line (LBL) radiative transfer calculations at fine monochromatic frequencies are needed in order to properly calculate spectral contributions of water vapor and trace gases in the atmosphere in infrared and solar spectral regions. Therefore, fast and accurate RTMs are needed to efficiently process large amount of satellite data. A Principal Component-based Radiative Transfer Model (PCRTM) was first developed in 2004 at NASA Langley Research Centre to fulfil this need. By using PC-compression, one can reduce the data dimension significantly while maintaining original information content. The PCRTM can directly compute PC-scores and their derivatives with respect to retrieved parameters. The PCRTM can simulate the top-of-atmosphere (TOA) radiance or reflectance spectra from 0.250 µm (400000 cm-1) to 2000 µm (50 cm-1) with several orders of magnitude faster speed as compared to a LBL RTM. It is also extremely accurate compared to LBL RTM benchmarks (0.03 K RMS error in IR and 0.05% in solar). The PCRTM model has been developed for hyperspectral sensors such as AIRS, CrIS, IASI, NAST-I, SHIS, FIRST, and CLARREO-IR in thermal IR spectral region and CLARREO-Solar, CPF, TEMPO, EMIT, OMI, and SCIAMACHY in solar spectral region. The PCRTM accuracy has been demonstrated via RTM intercomparisons and with real satellite observations from AIRS, CrIS, IASI, SCHIAMACHY, and EMIT etc. In this presentation, we will describe two PCRTM-based inversion algorithms to retrieve atmospheric temperature, water vapor, and trace gas profiles, as well as cloud and surface properties from hyperspectral sounders such as AIRS, CrIS, IASI, and NAST-I. The first one is called Single Fieldof-view Sounder Atmospheric Product (SiFSAP) algorithm. It provides L2 products with 9-times higher area spatial resolution as compared to current cloud-clearing sounder algorithms. The SiFSAP L2 and L3 products are available at NASA's Goddard Earth Sciences Data and Information Services Center (GES DISC) for public access. The second inversion algorithm is called Climate Fingerprinting Atmospheric Product (ClimFiSP) algorithm. It is designed to produce high quality climate products (trends, anomalies, daily, and monthly profiles of temperature, water vapor, traces, clouds, and surface properties) from multiple satellite sensors such AIRS on Aqua and CrIS on multiple satellites. This product will be available at NASA GES DISC later this year. The PCRTMbased high fidelity simulators for CLARREO and CPF have been used for sensor performance trade studies, algorithm development, and inter-satellite calibrations. We have also used PCRTM generated TOA radiance spectra to train an AI-based algorithm and successfully retrieved cloud properties from EMIT solar hyperspectral imagers.