Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Ultra-thin passivation layers in Cu(In,Ga)Se 2 thin-film solar cells: full-area passivated front contacts and their impact on bulk doping

In the search for highly transparent and non-toxic alternative front layers replacing state-of-the-art CdS in Cu(In,Ga)Se 2 thin-film solar cells, alternatives rarely exceed reference devices in terms of efficiency. Full-area ultra-thin aluminium oxide tunnelling layers do not require any contact patterning and thus overcome the main drawback of insulating passivation layers. Even a few monolayers of aluminium oxide can be deposited in a controlled manner by atomic layer deposition, they show excellent interface passivation properties, low absorption, and suitable current transport characteristics on test devices. Depositing a ZnO-based transparent front contact, however, results in extremely poor solar cell performance. The issue is not necessarily a low quality of the alternative front layer, but rather the intricate relation between front layer processing and electronic bulk properties in the absorber layer. We identify three challenges critical for the development of novel front passivation approaches:(i) both Cd and Zn impurities beneficially reduce the high native net dopant concentration in the space charge region, (ii) sputter deposition of ZnO damages the passivation layer resulting in increased interface recombination, (iii) thermal treatments of devices with ZnO layer result in substantial Zn diffusion, which can penetrate the full absorber thickness already at moderate temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Giant dielectric constant dominated by Maxwell-Wagner relaxation in Al{sub 2}O{sub 3}/TiO{sub 2} nanolaminates synthesized by atomic layer deposition.

Nanolaminates consisting of Al{sub 2}O{sub 3} and TiO{sub 2} oxide sublayers were synthesized by using atomic layer deposition to produce individual layers with atomic scale thickness control. The sublayer thicknesses were kept constant for each multilayer structure, and were changed from 50 to 0.2 nm for a series of different samples. Giant dielectric constant ({approx}1000) was observed when the sublayer thickness is less than 0.5 nm, which is significantly larger than that of Al{sub 2}O{sub 3} and TiO{sub 2} dielectrics. Detailed investigation revealed that the observed giant dielectric constant is originated from the Maxwell-Wagner type dielectric relaxation.

36 MATERIALS SCIENCE↗

Effect of GaN interlayer on polarity control of epitaxial ZnO thin films grown by molecular beam epitaxy

Epitaxial ZnO thin films were grown on nitrided (0001) sapphire substrates with an intervening GaN layer by rf-plasma-assisted molecular beam epitaxy. It was found that polarity of the ZnO epilayer could be controlled by modifying the GaN interlayer. ZnO grown on a distorted 3-nm-thick GaN interlayer has Zn-polarity while ZnO on a 20-nm-thick GaN interlayer with a high structural quality has O-polarity. High resolution transmission electron microscopy analysis indicates that the polarity of ZnO epilayer is controlled by the atomic structure of the interface between the ZnO buffer layer and the intervening GaN layer.

36 MATERIALS SCIENCE↗

Giant dielectric constant in TiO{sub 2}/Al{sub 2}O{sub 3} nanolaminates grown on doped silicon substrate by pulsed laser deposition

High quality amorphous nanolaminates by means of alternate Al{sub 2}O{sub 3} and TiO{sub 2} oxide sublayers were grown with atomic scale thickness control by pulsed laser deposition. A giant dielectric constant (>10 000), strongly enhanced compared to the value of either Al{sub 2}O{sub 3} or TiO{sub 2} or their solid solution, was observed. The dependence of the dielectric constant and the dielectric loss on the individual layer thickness of each of the constituting materials was investigated between 0.3 nm and 1 nm, in order to understand the prevailing mechanisms and allow for an optimization of the performances. An impedance study confirmed as the key source of the giant dielectric constant a Maxwell–Wagner type dielectric relaxation, caused by space charge polarization in the nanolaminate structure. The current work provides better insight of nanolaminates and their sublayer thickness engineering for potential applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ablation loading of barium ions into a surface-electrode trap

Trapped-ion quantum information processing may benefit from qubits encoded in isotopes that are practically available in only small quantities, e.g., due to low natural abundance or radioactivity. Laser ablation provides a method of controllably liberating neutral atoms or ions from low-volume targets, but energetic ablation products can be difficult to confine in the small ion-electrode distance, micron-scale microfabricated traps amenable to high-speed, high-fidelity manipulation of ion arrays. Here, we investigate ablation-based ion loading into surface-electrode traps of different sizes to test a model describing ion loading probability as a function of effective trap volume and other trap parameters. We characterize loading of ablated barium from a metallic source in two cryogenic surface-electrode traps with 730 and 50 μm ion-electrode distances. Furthermore, our loading rate agrees with a predictive analytical model, providing insight for the confinement of limited-quantity species of interest for quantum computing, simulation, and sensing.

74 ATOMIC AND MOLECULAR PHYSICS↗

Design and Demonstration of AlxIn1-xP Multiple Quantum Well Light-Emitting Diodes

Direct bandgap AlxIn1-xP alloys offer an advantage for red and amber light-emitting diode (LED) operation over conventional (AlxGa1-x)0.5In0.5P alloys due to their higher direct bandgap energies. However, the coupled variation of its bandgap energy and lattice constant present challenges for fabricating quantum well-based LED devices on GaAs substrates. Here, we present the design and demonstration of AlxIn1-xP red and amber LEDs incorporating multiple quantum well structures. Strain balancing the quantum well layers and manipulating the AlxIn1-xP conduction band energy through control of spontaneous atomic ordering produce structures with higher electron confinement barriers than comparable (AlxGa1-x)0.5In0.5P LEDs. We also discuss future improvements that must be made to realize high efficiency red and amber LEDs.

36 MATERIALS SCIENCE↗

High magnetic field response of superconductivity dome in quantum artificial high−⁢𝑇 𝐶 superlattices with variable geometry

It is known that cuprate artificial high-𝑇 𝐶 superlattices (AHTS) with period 𝑑, composed of quantum wells confining interface space charge in stoichiometric Mott insulator layers (𝑆), with thickness 𝐿, at the interface with overdoped normal metallic cuprate layers (𝑁) show a superconducting dome by tuning the geometric 𝐿 over 𝑑 ratio of the SNSN superlattice with the top predicted by quantum material design engineering quantum size effects. Here we report high-field magnetotransport measurements up to 41 Tesla of AHTS across the entire superconducting dome. The results show the universal upward-concave behavior of the temperature-dependent upper critical magnetic field in low-𝑇 𝐶 samples at the rising edge and drop edge of the dome, providing strong evidence consistent with two-band superconductivity in agreement with multigap theory used for quantum design of the SNSN superlattices. The measured superconducting coherence length demonstrates that atomic-scale engineering controls not only the critical temperature but also the intrinsic pair size at Fano-Feshbach resonances physics paving the way toward next-generation quantum devices and shedding light on unconventional superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vapor-cavity-QED system for quantum computation and communication

In this work, we propose performing key operations in quantum computation and communication using room-temperature atoms moving across a grid of high-quality-factor, small-mode-volume cavities. These cavities enable high-cooperativity interactions with single atoms to be achieved with a characteristic timescale much shorter than the atomic transit time, allowing multiple coherent operations to take place. We study scenarios where we can drive a Raman transition to generate photons with specific temporal shapes and to absorb, and hence detect, single photons. The strong atom-cavity interaction can also be used to implement the atom-photon controlled-phase gate, which can then be used to construct photon-photon gates, create photonic cluster states, and perform nondemolition detection of single photons. We provide numerics validating our methods and discuss the implications of our results for several applications.

Austin, Sharoon [National Institute of Standards a↗

Approaches for a quantum memory at telecommunication wavelengths

We report experimental storage and retrieval of weak coherent states of light at telecommunication wavelengths using erbium ions doped into a solid. We use two photon-echo-based quantum storage protocols. The first one is based on controlled reversible inhomogeneous broadening (CRIB). It allows the retrieval of the light on demand by controlling the collective atomic coherence with an external electric field, via the linear Stark effect. We study how atoms in the excited state affect the signal-to-noise ratio of the CRIB memory. Additionally we show how CRIB can be used to modify the temporal width of the retrieved light pulse. The second protocol is based on atomic frequency combs. Using this protocol we verify that the reversible mapping is phase preserving by performing an interference experiment with a local oscillator. These measurements are enabling steps toward solid-state quantum memories at telecommunication wavelengths. We also give an outlook on possible improvements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atom-by-atom imaging of moiré transformations in 2D transition metal dichalcogenides

Understanding the atomic-scale mechanisms that govern the structure of interfaces is critical across materials systems but particularly so for two-dimensional (2D) moiré materials. Here, we image, atom-by-atom, the thermally induced structural evolution of twisted bilayer transition metal dichalcogenides using in situ transmission electron microscopy. We observe low-temperature, local conversion of moiré superlattice into nanoscale aligned domains. Unexpectedly, this process occurs by nucleating a new grain within one monolayer, whose crystal orientation is templated by the other. The aligned domains grow through collective rotation of moiré supercells and hopping of 5|7 defect pairs at moiré boundaries. This provides mechanistic insight into the atomic-scale interactions controlling moiré structures and illustrates the potential to pattern interfacial structure and properties of 2D materials at the nanoscale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Principles for designing proteins with cavities formed by curved β sheets

Active sites and ligand-binding cavities in native proteins are often formed by curved β sheets, and the ability to control β-sheet curvature would allow design of binding proteins with cavities customized to specific ligands. Toward this end, we investigated the mechanisms controlling β-sheet curvature by studying the geometry of β sheets in naturally occurring protein structures and folding simulations. The principles emerging from this analysis were used to design, de novo, a series of proteins with curved β sheets topped with α helices. Nuclear magnetic resonance and crystal structures of the designs closely match the computational models, showing that β-sheet curvature can be controlled with atomic-level accuracy. Our approach enables the design of proteins with cavities and provides a route to custom design ligand-binding and catalytic sites.

59 BASIC BIOLOGICAL SCIENCES↗

Innovations in X-ray-induced electron emission spectroscopy (XIEES)

Currently, a pressing need has arisen for controlling the local atomic and electron structure of materials irrespective of their aggregate state. Efficient approaches to the studies of short-range order are based on phenomena accompanied by interference of secondary electrons excited by primary X-ray radiation. The set of such approaches are commonly referred to as the X-ray absorption fine structure (XAFS) methods. In reality, the XAFS methods are based on the use of synchrotron radiation and applied to structural studies in two modes of measurements, transmission analysis and recording of secondary effects. Only two such effects-specifically, the X-ray fluorescence an d X-ray-induced electron emission effect-are commonly discussed. Access to synchrotron accelerators is problematic for most researchers, so a demand is created for designing laboratory systems that make direct access possible. Since the power of laboratory systems is much lower than that of synchrotrons, it is essential to use much more efficient detectors of secondary electrons. In addition, it is of interest to analyze energy characteristics with a high spatial resolution. Channel multipliers and multichannel boards are incapable of providing such a possibility. For this reason, an improved electron detector has been developed to analyze the photoemission effect in an accelerating field.

36 MATERIALS SCIENCE↗

Chlorine adsorption on the InAs (001) surface

Chlorine adsorption on the In-stabilized InAs(001) surface with {zeta}-(4 Multiplication-Sign 2) and {beta}3 Prime -(4 Multiplication-Sign 2) reconstructions and on the Ga-stabilized GaAs (001)-{zeta}-(4 Multiplication-Sign 2) surface has been studied within the electron density functional theory. The equilibrium structural parameters of these reconstructions, surface atom positions, bond lengths in dimers, and their changes upon chlorine adsorption are determined. The electronic characteristics of the clean surface and the surface with adsorbed chlorine are calculated. It is shown that the most energetically favorable positions for chlorine adsorption are top positions over dimerized indium or gallium atoms. The mechanism of chlorine binding with In(Ga)-stabilized surface is explained. The interaction of chlorine atoms with dimerized surface atoms weakens surface atom bonds and controls the initial stage of surface etching.

36 MATERIALS SCIENCE↗

Structurization of submonolayer carbon coatings deposited in a low-pressure microwave plasma on single-crystal silicon

Features of surface structurization of submonolayer carbon coatings deposited in highly ionized ultrahigh-frequency low-pressure plasma on silicon wafers with (111) and (100) crystallographic orientations are studied. It is shown that the size and surface density of nanostructured carbon formations are controlled by the atomic microstructure of the silicon free surface of these crystallographic orientations and its modifications depending on deposition and annealing conditions. We show the fundamental possibility of fabricating integrated columnar nanostructures with surface densities to (4-5) Multiplication-Sign 10{sup 9} cm{sup -2} and higher than 400 nm by highly anisotropic etching using the obtained carbon island nanostructures as a mask coating on singlecrystal (100) silicon.

36 MATERIALS SCIENCE↗

(M4CT-18IN0707093) Investigating Electrochemical Impedance Spectroscopic (EIS) Measurement of Surrogate Oxide at High Temperatures

The objective of this work package is to develop electrochemical impedance spectroscopic (EIS) techniques for the in-pile measurement of changes in solid state chemistry of fuels and materials in coupling with model simulation and material characterization. This work package will involve the initial development of electrochemical sensing technologies for measuring spatial- and time-resolved changes in fuel and cladding chemistry. Specific attention will be paid to monitoring changes in fuel stoichiometry, monitor cladding hydride formation and deformation, and cladding corrosion. The planned work during this period was focused on theoretical investigation on high temperature impedance of material, establishing experimental capabilities, including high temperature EIS under controlled gas atmosphere, atom probe tomography (APT), Raman Spectroscopy, and Synchrotron XRD. Future work will focus on starting the electrochemical sensor development, targeting the dielectric response of oxide fuels and cladding oxides/hydrides under thermodynamic equilibria, during transients, and under irradiation. Three main achievements are summarized in this report for the FY17 carry-over. First, theoretical investigation on high temperature impedance of material were conducted and spatial distribution of defects and equivalent resistivity in stoichiometric oxides under a temperature gradient were analyzed. Second, a laboratory for EIS measurement at high temperature was established and the laboratory instruction (LI) for conducting experiments was approved; and the impedance of CeO2 at 800 C was examined and its electrical conductivities were analyzed and compared with other reported data. In addition, the capabilities of advanced characterization wer established including high temperature Ramen, atom probe tomography (APT) and SEM, and samples including Zr4 and CeO2 were characterized.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development of an Electrochemical Impedance Instrument for Monitoring Corrosion Formation (Oxide and Hydride) on Cladding Materials

The objective of this work package is to develop electrochemical impedance spectroscopic (EIS) techniques for the in pile measurement of changes in cladding materials in coupling with model simulation and material characterization. This work package will involve the initial development of electrochemical sensing technologies for measuring spatial and time resolved changes in cladding chemistry. Specific attention will be paid to monitoring changes in monitor cladding corrosion including oxide and hydride formation and deformation. The planned work during this period was focused on cladding material zirconium alloy corrosion, oxide and hydride development, and to characterize samples using EIS under controlled gas atmosphere, atom probe tomography (APT), Raman Spectroscopy, and Synchrotron X-ray diffraction (XRD). The corrosion, including oxide and hydride of zirconium alloy samples, was tested in this study. The samples were treated at a gas environment containing 3% H2 (vol%) balanced with N2 gas at various temperatures (100 – 500°C) and different times (up to 60 hours) and were characterized by in situ EIS. After treatment, various characterization techniques were applied to measure the samples, including TGA, Ramen, XRD, and APT. This study found that impedance spectra can be affected significantly with (furnace/environment) temperature. Higher temperature resulted in higher overall impedance, and longer exposure time exerted similar effects. Proof of concept characterization of oxidized samples, including TGA, Raman, XRD, and APT, were accomplished on samples exposed to 700 oC gas environment containing 20% O2 and 80% N2. TGA provides observable breakaway and bulk oxide growth measurements. High-temperature, in-situ Raman provides observation of oxidation stress at the surface of the oxide. Additionally, a transition from tetragonal to monoclinic zirconia can be seen early in the oxidation experiment. Specifically, tetragonal-rich zirconia is seen at the metal/oxide interface, where a transition to monoclinic-rich zirconia is seen in the bulk of the oxide. It has also been confirmed that highly compressive residual stresses are seen near the metal/oxide interface. It is concluded that the transition from tetragonal to monoclinic zirconia is induced by massive shifts in stress as the oxide grows. APT has supplied evident differences in the distribution of zirconium and oxygen at the metal/oxide interface. On the pre-breakaway sample, the metastable Zr(O) region at the boundary is relatively thin, interfaced by Zr-rich (i.e., metal) and O-rich (i.e., ZrO2) on either side. In contrast, it has been seen on a post-breakaway sample that the Zr(O) metastable region is much greater in thickness, with evidence of four “zones” showing slightly contrasting composition between 49-54% Zr. In addition, it can be seen from the Zr-2.65Nb post-breakaway sample that secondary element concentrations are considerably different than bulk composition measurements show. Specifically, Nb concentration is much lower than expected, whereas Fe concentration is much higher than expected. These differences could play a role in each element’s contribution to oxide growth mechanisms, as well as causation for breakaway. Future work is focused on analyzing EIS spectra of hydride and its correlation with characterization features, finite element (FE) modeling of cladding materials, electrochemical sensor development, targeting cladding oxides/hydrides under thermodynamic equilibria, during transients and under irradiation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Coherent control of long-range photoinduced electron transfer by stimulated X-ray Raman processes

Significance Electron transfer is ubiquitous in chemical reactions and many biophysical processes such as respiration and photosynthesis. In this work, we show how broadband X-ray pulses can be used to change the local electronic structures of donor–bridge–acceptor (DBA) molecular systems, thus enabling and controlling electron transfer between designated sites in the molecule. An X-ray–stimulated Raman process can control electron transfer with atomic specificity and ultrafast timescale. With an appropriate X-ray pulse setting, electron pathways can be selectively enhanced. The control can be implemented at the donor, bridge, or acceptor sites in a DBA system.

74 ATOMIC AND MOLECULAR PHYSICS↗