Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Single-Band and Dual-Band Infrared Detectors

Bias-switchable dual-band infrared detectors and methods of manufacturing such detectors are provided. The infrared detectors are based on a back-to-back heterojunction diode design, where the detector structure consists of, sequentially, a top contact layer, a unipolar hole barrier layer, an absorber layer, a unipolar electron barrier, a second absorber, a second unipolar hole barrier, and a bottom contact layer. In addition, by substantially reducing the width of one of the absorber layers, a single-band infrared detector can also be formed.

Ting, David Z.↗

Structural transformation from Mn{sub 3}O{sub 4} nanorods to nanoparticles and band gap tuning via Zn doping

Highlights: Black-Right-Pointing-Pointer Successful doping of Zn in Mn{sub 3}O{sub 4} nanorod has been done by simple hydrothermal method. Black-Right-Pointing-Pointer Increase of Zn doping encouraged the formation of Mn{sub 3}O{sub 4} nanoparticle out of Mn{sub 3}O{sub 4} nanorod. Black-Right-Pointing-Pointer The energy band gap of Mn{sub 3}O{sub 4} nanorod increased continuously with the increase of Zn doping concentration. -- Abstract: Synthesis of undoped and Zn doped hausmannite Mn{sub 3}O{sub 4} nanorods was achieved through a simple hydrothermal route. Scanning electron microscopic studies showed that due to in situ Zn doping a structural deformation from Mn{sub 3}O{sub 4} nanorods to a mixture of Mn{sub 3}O{sub 4} nanorods and nanoparticles occurred. The amount of nanoparticles in the mixture increased with the increase of doping percentage. X-ray diffraction studies, transmission electron microscopy and selected area electron diffraction pattern revealed that both the nanorods and the nanoparticles were hausmannite Mn{sub 3}O{sub 4}. X-ray photoelectron spectroscopic studies confirmed successful zinc doping in Mn{sub 3}O{sub 4}. Microscopic studies revealed that the average diameters of Mn{sub 3}O{sub 4} nanorods and nanoparticles were of 200 nm and 70 nm, respectively. The possible growth mechanism and the reasons behind the formation of nanoparticles along with nanorods are discussed briefly. UV-vis spectroscopic studies showed a continuous increase in the energy bandgap of Mn{sub 3}O{sub 4} with the increase in Zn doping percentage.

36 MATERIALS SCIENCE↗

From Ba{sub 3}Ta{sub 5}O{sub 14}N to LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2}: Decreasing the optical band gap of a photocatalyst

Yellow LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} was successfully synthesized as phase-pure material crystallizing isostructurally to previously reported Ba{sub 3}Ta{sub 5}O{sub 14}N and mixed-valence Ba{sub 3}Ta{sup V}{sub 4}Ta{sup IV}O{sub 15}. The electronic structure of LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} was studied theoretically with the range-separated hybrid method HSE06. The most stable structure was obtained when lanthanum was placed on 2a and nitrogen on 4h sites confirming Pauling's second rule. By incorporating nitrogen, the measured band gap decreases from ∼3.8 eV for the oxide via 2.74 eV for Ba{sub 3}Ta{sub 5}O{sub 14}N to 2.63 eV for the new oxide nitride, giving rise to an absorption band well in the visible-light region. Calculated fundamental band gaps confirm the experimental trend. The atom-projected density of states has large contributions from N2p orbitals close to the valence band edge. These are responsible for the observed band gap reduction. Photocatalytic hydrogen formation was investigated and compared with that of Ba{sub 3}Ta{sub 5}O{sub 14}N revealing significantly higher activity for LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} under UV-light. - Graphical abstract: X-ray powder diffraction pattern of LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} with the results of the Rietveld refinements. Inset: Unit cell of LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} and polyhedral representation of the crystal structure. - Highlights: • Synthesis of a new oxide nitride LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2}. • Refinement of the crystal structure. • Quantum chemical calculations provided band gap close to the measured value. • New phase shows a higher photocatalytic H{sub 2} evolution rate compared to prior tested Ba{sub 3}Ta{sub 5}O{sub 14}N.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

GW quasiparticle energy study of ternary tetradymite Bi{sub 2}Te{sub 2}Se and Bi{sub 2}Te{sub 2}S thin films

In this work, we have evaluated the quasiparticle energies of ternary tetradymite Bi{sub 2}Te{sub 2}Se and Bi{sub 2}Te{sub 2}S using first-principles calculation within the G{sub 0}W{sub 0} methods. We have also performed a broad convergence tests in order to investigate the quasiparticle corrections to the structural parameters and to the semi core d electrons in both of the compounds. For each case, we have calculated the many-body corrections within a one-shot GW method of the compounds. Our results have shown that for Bi{sub 2}Te{sub 2}Se the GW corrections increase the band gap to almost 10%, and for specific atomic positions, the band structure shows a close value to the experimental one. For Bi{sub 2}Te{sub 2}S, despite increase in the band gap due to the GW corrections, possibility of bulk resistivity that can be significant for photovoltaic applications was observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

One-pot hydrothermal synthesis of zeolite/sodium tantalate composite and its photodegradation of methyl orange

Highlights: • Sodalite/NaTaO{sub 3} composite is prepared by a one-pot hydrothermal synthesis. • Enhanced photodegradation is achieved due to the heterogeneous doping effect. • Structure distortion is found for NaTaO{sub 3} after removing sodalite by acid washing. - Abstract: Sodalite/NaTaO{sub 3} composite was prepared by a one-pot hydrothermal synthesis method. Sodalite and NaTaO{sub 3} grow interpenetrated, and the resulting composites have similar morphology as the pure sodalite. The sodalite/NaTaO{sub 3} composite has a lower band gap of 3.35 eV due to the heterogeneous doping effect, and exhibits an enhanced photodegradation of methyl orange under UV irradiation as compared to the pure NaTaO{sub 3}. A slight structure distortion is found for NaTaO{sub 3} after removing sodalite by acid washing the sodalite/NaTaO{sub 3} composite, and such result further confirms the co-growth of the two crystals. This one-pot hydrothermal method opens up new avenues for the preparation of photocatalytic composites.

36 MATERIALS SCIENCE↗

Sol–gel synthesis, structure and luminescence properties of Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} phosphors

Graphical abstract: The phosphor powders of Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} were prepared by sol–gel method. The dependence of luminescence intensity on the Eu{sup 3+} concentration was investigated. - Highlights: • We synthesize Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} phosphors by the sol–gel method. • The effect of temperature on the crystallinity and morphology is investigated. • The phosphor presents an intense CT band in near UV range (370–410 nm). • The concentration quenching mechanism is the exchange interaction. - Abstract: Double-perovskite Ba{sub 2}Zn{sub 1−x}MoO{sub 6}:xEu{sup 3+} (x = 0, 0.02, 0.04, 0.06, 0.08, 0.1) orange–red emitting phosphors were synthesized by using the sol–gel method. The crystalline structure and photoluminescence properties of the phosphors were investigated. The X-ray diffraction (XRD) patterns indicate that the structure of matrix Ba{sub 2}ZnMoO{sub 6} is cubic double-perovskite with space group Fm-3m. The Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} phosphors present an intense broad charge transfer (CT) band absorption in near UV range (370–410 nm), which attributes to the charge transfer state of MoO{sub 6}, and performs orange–red emission of Eu{sup 3+} ({sup 5}D{sub 0} → {sup 7}F{sub 1} transition) at around 596 nm. A low concentration quenching occurs in Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} and the optimal doping concentration is about 6 mol%. The Ba{sub 2}ZnMoO{sub 6}:Eu{sup 3+} phosphors are considered to be a promising orange–red emitting phosphor for near ultraviolet GaN-based white light emitting diode.

36 MATERIALS SCIENCE↗

Simulation of electron transport in GaAs/AlAs superlattices with a small number of periods for the THz frequency range

The electron transport in superlattices based on GaAs/AlAs heterostructures with a small number of periods (6 periods) is calculated by the Monte Carlo method. These superlattices are used in terahertz diodes for the frequency stabilization of quantum cascade lasers in the range up to 4.7 THz. The band structure of superlattices with different numbers of AlAs monolayers is considered and their current–voltage characteristics are calculated. The calculated current–voltage characteristics are compared with the experimental data. The possibility of the efficient application of these superlattices in the THz frequency range is established both theoretically and experimentally.

36 MATERIALS SCIENCE↗

2p x-ray absorption spectroscopy of 3d transition metal systems

This review provides an overview of the different methods and computer codes that are used to interpret 2p x-ray absorption spectra of 3d transition metal ions. We first introduce the basic parameters and give an overview of the methods used. We start with the semi-empirical multiplet codes and compare the different codes that are available. A special chapter is devoted to the user friendly interfaces that have been written on the basis of these codes. Next we discuss the first principle codes based on band structure, including a chapter on Density Functional theory based approaches. We also give an overview of the first-principle multiplet codes that start from a cluster calculation and we discuss the wavefunction based methods, including multi-reference methods. We end the review with a discussion of the link between theory and experiment and discuss the open issues in the spectral analysis.

36 MATERIALS SCIENCE↗

An Optimal Density Functional Theory Method for GaN and ZnO

We report an optimal DFT method (bBLYP) for studying the GaN and ZnO systems. It is developed by modifying the exchange functional in the hybrid BLYP method in order to overcome the flaw of traditional DFT that often predict a rather small band gap for those semiconductors. Results show that the bBLYP method can describe not only correct band gaps of both GaN and ZnO wurtzite crystals, but also accurate properties of relevant small molecules. The application study of crystal-cut nanoparticles and nanowires reveals a new mechanism for band gap narrowing in GaN/ZnO.

74 ATOMIC AND MOLECULAR PHYSICS↗

Improved photocatalytic activity of single crystal ZnO nanorod derived from highly effective P/N heterojunction

Graphical abstract: Schematic showing on photocatalytic degradation 2,4-DCP of ZnO NRs/BDD heterojunction. - Highlights: • Single-crystal ZnO nanorods based P/N heterojunction has been synthesized. • Vertical growth ZnO NRs on BDD can effectively photocatalytic decompose 2,4-DCP. • The rate constant of photocatalysis can be enhanced due to P/N heterojunction. - Abstract: Highly effective single-crystal ZnO nanorods based P/N heterojunction has been synthesized by a controllable crystal seed-induced hydrothermal vertical growth method, which facilitates the separation of the photogenerated electrons and holes due to its endogenous space charge region and suitable band structure. Therefore, photocatalytic activity for degradation of the toxic pollutants is markedly enhanced.

36 MATERIALS SCIENCE↗

Imaging mechanism for hyperspectral scanning probe microscopy via Gaussian process modelling

We investigate the ability to reconstruct and derive spatial structure from sparsely sampled 3D piezoresponse force microcopy data, captured using the band-excitation (BE) technique, via Gaussian Process (GP) methods. Even for weakly informative priors, GP methods allow unambiguous determination of the characteristic length scales of the imaging process both in spatial and frequency domains. We further show that BE data set tends to be oversampled in the spatial domains, with ~30% of original data set sufficient for high-quality reconstruction, potentially enabling faster BE imaging. At the same time, reliable reconstruction along the frequency domain requires the resonance peak to be within the measured band. This behavior suggests the optimal strategy for the BE imaging on unknown samples. Finally, we discuss how GP can be used for automated experimentation in SPM, by combining GP regression with non-rectangular scans.

47 OTHER INSTRUMENTATION↗

Predicting solid state material platforms for quantum technologies

Semiconductor materials provide a compelling platform for quantum technologies (QT). However, identifying promising material hosts among the plethora of candidates is a major challenge. Therefore, we have developed a framework for the automated discovery of semiconductor platforms for QT using material informatics and machine learning methods. Different approaches were implemented to label data for training the supervised machine learning (ML) algorithms logistic regression, decision trees, random forests and gradient boosting. We find that an empirical approach relying exclusively on findings from the literature yields a clear separation between predicted suitable and unsuitable candidates. In contrast to expectations from the literature focusing on band gap and ionic character as important properties for QT compatibility, the ML methods highlight features related to symmetry and crystal structure, including bond length, orientation and radial distribution, as influential when predicting a material as suitable for QT.

36 MATERIALS SCIENCE↗

Investigation of structural and thermal properties of Nb 2 CT X MXenes at elevated temperature

Nb-based MXenes, particularly Nb 2 CT X is noted for its metallic characteristics, and nearly zero band gap because of it 2D structure. Different synthesis processes have been utilized such as HF etching, HCl/LiF and molten salt method to prepare delaminated Nb 2 CT X MXene sheets[1]. Moreover, various approaches have been tried for modifying MXenes properties including partial oxidation for application such as energy storage, gas sensing, photocatalyst etc. One step synthesis technique used for creating efficient hydrogen evolution photocatalyst comprised of Nb 2 O 5 /C/Nb 2 C composites. Furthermore, we have prepared Nb 2 CT X MXenes with a strong etching method and investigated its fundamental properties at elevated temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

General theory of the transverse dielectric constant of III-V semiconducting compounds

A general model of the transverse dielectric constant of III-V compounds is developed using a hybrid method which combines the kp method with a nonlocal pseudopotential calculation. In this method the Brillouin zone is partitioned into three regions by expanding the energy bands and matrix elements about the F, X, and L symmetry points. The real and imaginary parts of the dielectric constant are calculated as a sum of the individual contributions of each region. By using this partition method, it is possible to get good insight into the dependence of the dielectric constant on the shape of the band structure.

Kahen, K. B.↗

Transmission Properties of One-Dimensional Magneto-Optical Photonic Crystals Containing Graphene Nanolayers

Photonic crystals containing graphene nanolayers have been attracting increasing attention due to their distinctive properties. In this paper, we present a theoretical analysis on the transmission properties of magneto-photonic crystals containing graphene nanolayers by using the transfer matrix method. The investigation shows that unidirectional defect modes with high transmittance can be achieved in the proposed structure, and broad flat-top photonic conduction bands (PCBs) can also be found between the graphene-induced photonic band gap and the Bragg gap. Furthermore, the study on the PCBs indicates that the relationship between the number of PCBs (n) and the period number of the structure (N) can be expressed as n = N − 1(N = 2,3,4…). And, new and unexpected photonic band gaps among PCBs are observed. The effects of chemical potential of graphene, thickness of defect layer, and incident angle on transmission properties are also discussed. The research results may provide a valuable reference for the design and fabrication of optical communication devices, such as isolators, switches, multichannel filters, and so on.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of mixing Ce{sup 3+} and Nd{sup 3+} ions in equimolar ratio on structural, optical and dielectric properties on pure cerium orthovanadate and neodymium orthovanadate

Highlights: • CeV, NdV and mixed CeNdV nanoparticle prepared by chemical co precipitation method. • With mixing of Ce{sup 3+} and Nd{sup 3+} morphology is totally changed in mixed CeNdV. • Optical band energy of CeV, NdV and CeNdV shows good photocatalyst under UV light. • Conduction mechanism in CeV due to large polaron and small polaron in CeNdV. - Abstract: Cerium orthovanadate, neodymium orthovanadate and mixed cerium neodymium orthovanadate nanoparticles was prepared by co-precipitation method. Powder X-ray diffraction reveals tetragonal zircon structure. Slight increase in lattice parameter, volume and decrease in X-ray density inferred that Ce{sup 3+} and Nd{sup 3+} ion replaces each other. Transmission electron microscopy suggests change in morphology with the effect of mixing and validates formation of nanocrystalline material. The infrared transmittance spectrum confirmed the presence of various functional groups. Dielectric properties as function of frequency show dielectric constant and loss tangent decreases with increase in frequency which is due to Maxwell–Wagner type interfacial polarization. The variation of AC conductivity measurement with frequency suggests conduction mechanism due to large polaron hopping in CeV whereas small polaron in mixed CeNdV. The activation energy decreases with rising frequency indicates the conduction mechanism is based on polaron hopping between localized states in disordered manner.

36 MATERIALS SCIENCE↗

Ab-initio study of the structural, linear and nonlinear optical properties of CdAl{sub 2}Se{sub 4} defect-chalcopyrite

The complex density functional theory (DFT) calculations of structural, electronic, linear and nonlinear optical properties for the defect chalcopyrite CdAl{sub 2}Se{sub 4} compound have been reported using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN2k code. We employed the Wu and Cohen generalized gradient approximation (GGA-WC), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for band structure, density of states and the spectral features of the linear and nonlinear optical properties. This compound has a wide direct energy band gap of about 2.927 eV with both the valence band maximum and conduction band minimum located at the center of the Brillouin zone. The ground state quantities such as lattice parameters (a, c, x, y and z), bulk modulus B and its pressure derivative B' are evaluated. We have calculated the frequency-dependent complex epsilon(omega), its zero-frequency limit epsilon{sub 1}(0), refractive index n(omega), birefringence DELTAn(omega), the reflectivity R(omega) and electron energy loss function L(omega). Calculations are reported for the frequency-dependent complex second-order nonlinear optical susceptibilities. We find opposite signs of the contributions of the 2omega and 1omega inter/intra-band to the imaginary part for the dominant component through the wide optical frequency range. - Graphical abstract: Calculated band structure and total density of CdAl{sub 2}Se{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗