SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Case study showing project and performance data and energy-efficiency measures for a DOE 2019 Housing Innovation Award winning home that was certified to the DOE Zero Energy Ready Home criteria.
Case study of a DOE 2020 Housing Innovation Award winning custom home in a mixed-humid climate that got a HERS 14 with PV, with 3,259 square feet, triple-paned windows, a hydronic radiant floor heating system, an electric vehicle charging station, and 7.3 kW of rooftop-mounted solar panels.
Geothermal heat pumps can be great alternatives to air conditioners and furnaces, and require less electricity to run. This case study focuses on Dallas-Fort Worth U.S. 287 Bridge and is part of a series: https://www.energy.gov/eere/geothermal/geothermal-heat-pump-case-studies.
A load case study of geometric nonlinear large deflections of a cantilever beam is presented. The bending strain must remain elastic. Closed form solution and finite element methods of analysis are illustrated and compared for three common load cases. A nondimensional nomogram for each case is presented in the summary.
Case study of a DOE 2016 Housing Innovation Award winning affordable home in the mixed-humid climate that met the DOE Zero Energy Ready Home criteria and achieved a HERS 32 without PV or HERS 9 with PV.
In this case study, we examine software safety risk in three flight hardware systems in NASA's Constellation spaceflight program. We applied our Technical and Process Risk Measurement (TPRM) methodology to the Constellation hazard analysis process to quantify the technical and process risks involving software safety in the early design phase of these projects. We analyzed 154 hazard reports and collected metrics to measure the prevalence of software in hazards and the specificity of descriptions of software causes of hazardous conditions. We found that 49-70% of 154 hazardous conditions could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. The application of the TPRM methodology identified process risks in the application of the hazard analysis process itself that may lead to software safety risk.
Case study describing how adidas implemented a best practice of a planned replacement program for its RTUs.
Case study of a DOE 2015 Housing Innovation Award winning multifamily project with 26 units in the cold climate that got a HERS 54 without PV, or HERS 28 with PV, with 2x6 24” on center walls with R-23 blown fiberglass; slab foundation with R-10 rigid at slab edge; plus R-10 rigid exterior; R-22 ICF basement walls; vented attic with R-50 blown fiberglass; 92 AFUE furnace, 13 SEER AC.
Case study of a DOE 2015 Housing Innovation Award winning affordable home in the hot-humid climate that got a HERS 56 without PV or HERS 26 with PV, with 4.5” SIP walls and 8.5” SIP roof; uninsulated slab; ductless minisplit heat pump 15.5 SEER, and tankless hot water.
Case study of a DOE 2016 Housing Innovation Award winning custom home in a hot humid climate that got a HERS 12 with PV, with 5.5-inch rigid foam-and-steel panels, an unvented attic, solar hot water, an air-source heat pump with small-diameter ducts, a fresh air intake.
Poster presentation of NETL's recently-published DAC sorbent case study results at the 2022 NETL Carbon Management Project Review Meeting held on August 15-19, 2022 in Pittsburgh, PA.
Case study of a DOE 2020 Housing Innovation Award winning custom home in a cold climate that got a HERS 29 with PV, with 1,793 square feet, high insulation levels in the attic, walls, and under the slab, plus ENERGY STAR appliances, and solar PV panels.
Case study of a DOE 2021 Housing Innovation Award winning custom home in a cold climate that got a HERS 33 without PV, with 1,936 square feet, gable roof with asphalt shingles, attic insulated with 14 inches (R-49) of blown cellulose, and triple-pane windows.
In this case study, groundwater/surface water modeling was used to determine efficacy of stabilization in place with hydrologic isolation for remediation of mercury contaminated areas in the Upper East Fork Poplar Creek (UEFPC) Watershed in Oak Ridge, TN. The modeling simulates the potential for mercury in soil to contaminate groundwater above industrial use risk standards and to contribute to surface water contamination. The modeling approach is unique in that it couples watershed hydrology with the total mercury transport and provides a tool for analysis of changes in mercury load related to daily precipitation, evaporation, and runoff from storms. The model also allows for simulation of colloidal transport of total mercury in surface water. Previous models for the watershed only simulated average yearly conditions and dissolved concentrations that are not sufficient for predicting mercury flux under variable flow conditions that control colloidal transport of mercury in the watershed. The transport of mercury from groundwater to surface water from mercury sources identified from information in the Oak Ridge Environmental Information System was simulated using a watershed scale model calibrated to match observed daily creek flow, total suspended solids and mercury fluxes. Mercury sources at the former Building 81-10 area, where mercury was previously retorted, were modeled using a telescopic refined mesh with boundary conditions extracted from the watershed model. Modeling on a watershed scale indicated that only source excavation for soils/sediment in the vicinity of UEFPC had any effect on mercury flux in surface water. The simulations showed that colloidal transport contributed 85 percent of the total mercury flux leaving the UEFPC watershed under high flow conditions. Simulation of dissolved mercury transport from liquid elemental mercury and adsorbed sources in soil at former Building 81-10 indicated that dissolved concentrations are orders of magnitude below a target industrial groundwater concentration beneath the source and would not influence concentrations in surface water at Station 17. This analysis addressed only shallow concentrations in soil and the shallow groundwater flow path in soil and unconsolidated sediments to UEFPC. Other mercury sources may occur in bedrock and transport though bedrock to UEFPC may contribute to the mercury flux at Station 17. Generally mercury in the source areas adjacent to the stream and in sediment that is eroding can contribute to the flux of mercury in surface water. Because colloidally adsorbed mercury can be transported in surface water, actions that trap colloids and or hydrologically isolate surface water runoff from source areas would reduce the flux of mercury in surface water. Mercury in soil is highly adsorbed and transport in the groundwater system is very limited under porous media conditions. (authors)
Case study showing project and performance data and energy-efficiency measures of a winning entry in the Housing Innovation Awards of DOE's Building Technologies Office.
This case study discusses Minnesota's low-income solar efforts through the Weatherization Assistance Program (WAP) and the Low-Income Home Energy Assistance Program (LIHEAP).
We discuss the case of the diffractive Higgs production at LHC. Aim of this talk is to propose the method of using Fracture Functions as an alternative to the ones already present in the literature. We discuss some of the questions involved and the main related issues.
A numerical model was developed for examining the thunderstorm electrification process in which it is assumed that the electrification is entirely due to noninductive charge transfer between colliding ice crystals and hail. Since this ice-hail charge mechanism is very dependent on particle sizes and distributions, an explicit microphysical framework is used. To maintain simplicity, the electrification model is kinematic; thus the temperature and velocity fields are input into the electrification model. The cloud model of Taylor (1989) was used to generate the temperature and velocity fields to examine the July 19, 1981, Cooperative Convective Precipitation Experiment thundercloud. Using these fields, the electrification model produced time-dependent ice particle concentrations, radar reflectivities, charge, and vertical electric field distributions in good general agreement with those observed. The model produced a maximum electric field strength of 1.27 kV/cm, which is on the order of that needed for lightning initiation, and this maximum occurred very close to the time of the observed discharge. Thus, the ice-hail charge mechanism appears to have played an important role in the electrical development of the July 19 cloud.