Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMPRESSION RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Radiochemical determination of Inertial Confinement Fusion capsule compression at the National Ignition Facility

We describe a radiochemical measurement of the ratio of isotope concentrations produced in a gold hohlraum surrounding an Inertial Confinement Fusion capsule at the National Ignition Facility (NIF). We relate the ratio of the concentrations of (n,γ) and (n,2n) products in the gold hohlraum matrix to the down-scatter of neutrons in the compressed fuel and, consequently, to the fuel's areal density. The observed ratio of the concentrations of {sup 198m+g}Au and {sup 196g}Au is a performance signature of ablator areal density and the fuel assembly confinement time. We identify the measurement of nuclear cross sections of astrophysical importance as a potential application of the neutrons generated at the NIF.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effects of Processing Parameters on Internal Stress of BN Films Prepared by Ion Mixing and Vapor Deposition

Boron nitride (BN) films have been attractive due to their excellent properties such as high hardness, thermal conductivity and chemical stability. In this study, BN films were prepared by depositing B vapor under simultaneous irradiation of N ions, that is ion mixing and vapor deposition (IVD) technique. The effects of processing parameters such as, acceleration voltage of N ions, transport ratio B/N and substrate temperature, on the internal stress of BN films were investigated. As a result, compressive internal stress increases at low acceleration voltage and high transport ratio B/N, which corresponded to the condition for formation of cBN phase. The hardness also becomes high at this condition and there is a strong correlation between internal stress and hardness of BN film. In addition to that, relaxation of internal stress by inserting inner layer between substrate and cBN layer has been carried out. It is confirmed that internal stress can be decreased by inner layer. Especially, relaxation of internal stress without degradation of high hardness can be achieved when the crystal structure of inner layer is hBN.

36 MATERIALS SCIENCE↗

Revisiting the Recommended Geometry for the Diametrally Compressed Ceramic C-Ring Specimen

A study conducted several years ago found that a stated allowable width/thickness (b/t) ratio in ASTM C1323 (Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature) could ultimately cause the prediction of a non-conservative probability of survival when the measured C-ring strength was scaled to a different size. Because of that problem, this study sought to reevaluate the stress state and geometry of the C-ring specimen and suggest changes to ASTM C1323 that would resolve that issue. Elasticity, mechanics of materials, and finite element solutions were revisited with the C ring geometry. To avoid the introduction of more than 2% error, it was determined that the C ring width/thickness (b/t) ratio should range between 1-3 and that its inner radius/outer radius (ri/ro) ratio should range between 0.50-0.95. ASTM C1323 presently allows for b/t to be as large as 4 so that ratio should be reduced to 3.

36 MATERIALS SCIENCE↗

Synthesis and characterization of photo-cross-linkable quince seed-based hydrogels for soft tissue engineering applications

The convenience, versatility, and biocompatibility of photocrosslinkable hydrogel precursors make them promising candidates for developing tissue engineering scaffolds. However, the current library of photosensitive materials is limited. This study reports, for the first time, the modification of quince seed mucilage (QS) with glycidyl methacrylate (GM), resulting in the synthesis of methacrylated QS (QSGM). The chemical composition and structure of QS were analyzed. The effects of reaction time, temperature, QS concentration, and GM/QS ratio on the degree of methacrylation, as well as the physicochemical, rheological, mechanical, and biological properties of the synthesized materials were explored. Chemical characterization using 1H NMR and FTIR confirmed the successful methacrylation of QS. Hydrogels fabricated from QSGMs at a 0.5 wt% concentration exhibited high swelling ratios of 320 to 580 g/g, and compressive strengths between 0.6 ± 0.1 and 1.2 ± 0.3 kPa. No significant changes in the rheological properties of hydrogel precursors were observed. Moreover, QSGM-based hydrogels supported cell encapsulation for 14 days with minimal cytotoxicity and immune cell activation. Finally, as a proof of concept, the potential use of QSGM for 3D printing was demonstrated. Overall, the results highlight the significant potential of QSGMs as a biomaterial of choice for soft tissue engineering applications.

3D printing↗

Autoignition study of iso -cetane/tetralin blends at low temperature

iso-Cetane and tetralin are the two fuel components commonly considered in literature diesel surrogates, and are hydrocarbon classes representative of iso-alkanes and naphthoaromatics, respectively. Since both surrogate components are involved in the key reactions controlling the autoignition reactivity of diesel surrogates, autoignition studies of iso-cetane, tetralin, and their blending behavior at low temperatures can be helpful in developing/refining chemical kinetic models of diesel surrogates, in order to better predict diesel ignition response under low temperature combustion conditions. In this investigation, autoignition experiments of iso-cetane, tetralin, and their binary mixtures at varying blending ratios have been conducted in a rapid compression machine (RCM) in the temperature/pressure range of 630–930 K and 10–20 bar. For the neat fuel components, the newly-acquired RCM data have been compared with the literature experimental results at some overlapping conditions. In addition, a chemical kinetic model describing the oxidation of iso-cetane and tetralin compiled/updated from the diesel surrogate model developed by Lawrence Livermore National Laboratory is used to simulate the experimental datasets. It is shown that this model exhibits good agreement with the experimental results of tetralin and also predicts the total ignition delay times of iso-cetane at lower temperatures reasonably well. However, the current model fails to fully capture the increase of total ignition delay time with increasing amount of tetralin in the binary blends observed in the present RCM experiments. Therefore, chemical kinetic analyses of the current model are conducted to help identify possible reasons leading to the discrepancies between simulations and experiments. Furthermore, the chemical kinetic interactions between iso-cetane and tetralin are explored by including additional cross-reactions among iso-cetane, tetralin, and their fuel fragments in the current model to assess their effects on model predictions. As a result, based on the chemical kinetic analysis results, future direction for model refinements is discussed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Characteristics of large amplitude compressive ion acoustic solitary wave in ion beam multicomponent plasma

Large amplitude ion acoustic compressive solitary waves are excited in a multicomponent plasma in the presence of a positive ion beam. The threshold amplitude, when steepening of the leading edge of the compressive pulse occurs, depends on the ion beam velocity. The Mach velocity and the amplitude of large amplitude compressive solitary waves are measured for different ion beam velocities. The amplification of the large amplitude compressive solitary wave is observed when the ratio of the ion beam velocity divided by the ion acoustic velocity is in the range of 0.8-1.4. The maximum amplitude of the density perturbation observed in the experiment is quite large (approx170%).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Increasing stagnation pressure and thermonuclear performance of inertial confinement fusion capsules by the introduction of a high-Z dopant

Inertial confinement fusion requires the inertia of the imploding mass to provide the necessary confinement such that the core reaches adequate high density, temperature, and pressure. Studies utilize low-Z capsules filled with hydrogenic fuel, which are subject to multiple instabilities at the interfaces during the implosion. To improve the stability of the fuel:capsule interface and narrow the imploding shell profile, capsules are doped with a small atomic percentage of a high-Z material. A series of recent indirect-drive experiments executed at the National Ignition Facility with tungsten-doped high density carbon capsules has demonstrated that the presence of this dopant serves to increase the in-flight aspect ratio of the shell and increase the compression and neutron yield performance of both gas-filled and deuterium-tritium cryogenically layered targets. These experiments definitively show that benefits accrued by the introduction of a high-Z dopant into the capsule can outweigh the detrimentally reduced stability of the ablation front, avoiding shell breakup or significant radiative cooling of the hot spot. Future experiments will utilize these types of capsules to additionally increase nuclear performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sputtered ferroelectric aluminum scandium boron nitride (Al 1−x−y B x Sc y N)/ n -GaN heterostructures

This work demonstrates ferroelectric switching in magnetron sputtered Al 1−x−y B x Sc y N/ n -GaN heterostructures. Using high power impulse magnetron sputtering, a silicon doped n -GaN bottom electrode with an electron concentration of 6.0 × 10 19 cm −3 is grown on c-plane sapphire. Al 1−x−y B x Sc y N films are prepared on the GaN surface with Al:B:Sc ratios that produce tensile, lattice matched, or compressive epitaxial strains. X-ray diffraction shows that lattice matched and compressively strained Al 1−x−y B x Sc y N compositions are pseudomorphic, while partial relaxation is observed for tensilely strained Al 1−x−y B x Sc y N/ n -GaN heterostructures. Electrically, the Al 1−x−y B x Sc y N/ n -GaN stacks show robust hysteresis; the P–E loops are fully saturated with both lattice matched and compressively strained Al 1−x−y B x Sc y N compositions exhibiting remanent polarization values of 135 μC/cm 2 . For comparison, Al 1−x−y B x Sc y N films are also prepared on metal organic chemical vapor deposition and single crystal GaN substrates to extend strain and morphology trends to more common substrate types. This report validates that sputter deposition is a feasible technique for fabricating strain-tunable ferroelectric III–N heterostructures with high crystalline fidelity and smooth surface morphologies.

42 ENGINEERING↗

Spin-density-wave order controlled by uniaxial stress in CeAuSb 2

We report the tetragonal heavy-fermion compound CeAuSb 2 (space group P4/nmm ) exhibits incommensurate spin-density wave (SDW) order below T N ≈ 6.5 K with the propagation vector q A = (δ A , δ A , 1/2 ). The application of uniaxial stress along the [010] direction induces a sudden change in the resistivity ratio ρ a /ρ b at a compressive strain of ε ≈ - 0.5 %. Here we use neutron scattering to show that the uniaxial stress induces a first-order transition to a SDW state with a different propagation vector (0, δ B ,1/2) with δ B = 0.25.The magnetic structure of the new (B) phase consists of Ce layers with ordered moments alternating with layers with zero moment stacked along the c axis. The ordered layers have an up-up-down-down configuration along the b axis. This is an unusual situation in which the loss of spatial inversion in a metallic system is driven by the magnetic order. We argue that the change in SDW wave vector leads to Fermi-surface reconstruction and a concomitant change in the transport properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanical Properties of Functionally Graded Concrete Lining for Deep Underground Structures

With the mining depth of coal resources increasing, the thickness of traditional lining for deep mines becomes large. The bearing capacity of the outer lining cannot be fully utilized, so a new type of functionally graded lining structure (FGL) with radial Young’s modulus varying in gradient is proposed. In this study, through theoretical analysis and numerical simulation, the mechanical properties of the functionally graded lining were studied, including the characteristics of the elastic working state and the ultimate bearing state. The influences of the structural parameters of the functionally graded lining, including the inner radius, the thickness, Young’s modulus, the compressive strength of the concrete, Poisson’s ratio, and the number of layers on the mechanical properties were analyzed. The calculation formula of the ultimate bearing capacity of the lining and the calculation formula of the maximum tangential strain at the time of lining failure were put forward. The accuracy of the formula was verified by comparing with the numerical simulation results. The research results provide the basis for the construction of the design theory of a functionally graded lining structure and have great engineering significance for the construction of the kilometer-deep mines in the future.

Li, De-Chun↗

Nanostructure of Solid Precipitates Obtained by Expansion of Polystyrene-block-Polybutadiene Solutions in Near Critical Propane: Block Ratio and Micellar Solution Effects

In contrast to incompressible liquid solutions, compressible near-critical solutions of block copolymers allow for controlling rapid structure transformations with pressure alone. For example, when dissolved in near-critical propane, polystyrene-block-polybutadiene can form a random molecular solution at high pressures, a micellar solution at moderate pressures, and a solvent-free precipitate at low pressures. In contrast to the unstructured virgin copolymer, such a propane-treated precipitate rapidly self-assembles toward structures characteristic of equilibrated block copolymers, such as lamellae, spheres, or cylinders, which depend on the block ratio rather than on the decompression rate or temperature, at least within the rate and temperature ranges investigated in this work. At lower temperatures, however, say below 40 C, glass transition of the styrene-butadiene diblocks can inhibit independent structure formation, while crystallization of their hydrogenated-butadiene analogues can preserve the micellar-solution structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Highly anisotropic conductivity of tablets pressed from polyaniline-montmorillonite nanocomposite

Highlights: • Montmorillonite (MMT) can be intercalated with polyaniline (PANI) chains. • Tablets pressed from PANI/MMT exhibit high anisotropy in electrical conductivity. • Pressure 28MPa is sufficient to reach the anisotropy. • Tablets pressed from pure PANI also exhibit anisotropy in electrical conductivity. - Abstract: Polyaniline-montmorillonite nanocomposite was prepared from anilinium sulfate (precursor) and ammonium peroxodisulfate (oxidizing agent) using simple one-step method. The resulting nanocomposite obtained in powder form has been pressed into tablets using various compression pressures (28–400 MPa). Electrical conductivities of tablets in two perpendicular directions, i.e. direction parallel with the main surface of tablet (σ=) and in orthogonal direction (σ⊥), and corresponding anisotropy factors (i.e., the ratio σ=/σ⊥) have been studied in dependence on compression pressure used during the preparation. Polyaniline-montmorillonite nanocomposite was characterized using X-ray diffraction analysis, raman spectroscopy, transmission electron microscopy, thermogravimetric analysis and molecular modeling which led to the understanding of the internal structure. Measurement of hardness performed on pressed tablets has been also involved. Taking into account the highest value of anisotropy factor reached (σ=/σ⊥ = 490), present study shows a chance to design conductors with nearly two-dimensional conductivity.

36 MATERIALS SCIENCE↗

Magneto-induced tunability of thermo-spin current in deformed zigzag graphene nanoribbons

The aim of this report is to unfold how the thermo-electric spin-polarized current in a transverse-biased zigzag graphene nanoribbon changes in the presence of uniaxial deformations and uniform perpendicular magnetic field. Employing the two-parameter Hubbard model along with the non-equilibrium Green's function formalism, we found that both uniaxial strain and magnetic field can significantly modulate the bandgap, local distribution of edge states, and the critical transverse electric field needed to achieve the half-metallic phase in the ribbon. Our analysis shows a significant enhancement of the maximum attainable spin-polarized current as functions of both source temperature and contacts temperature difference, with increasing the magnetic field or applying any magnitude of compressive strain. Furthermore, it is shown that the magneto-resistance ratio of the device, can be drastically tuned via strain engineering, reaching values as high as 2 × 10{sup 4}% for compressive strains of 5% magnitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low beryllium content Zr-based bulk metallic glass composite with plasticity and work hardenability

A modified Zr-based bulk metallic glass matrix composite Zr{sub 47.67}Cu{sub 40}Ti{sub 3.66}Ni{sub 2.66}Be{sub 6} has been produced by increasing the contents of elements of Zr and Cu with higher Poisson ratio and reducing the contents of Ti, Ni, and Be elements with lower Poisson ratio based on famous metallic glass former Vitreloy 1. A compressive yielding strength of 1804 MPa, fracture strength of 1938 MPa and 3.5% plastic strain was obtained for obtained metallic glass composite. Also, work-hardening behavior was observed during compressive experiment which was ascribed to the interaction of the in situ precipitated CuZr phase and shear bands.

36 MATERIALS SCIENCE↗

Origin of texture development in orthorhombic uranium

We study texture evolution of alpha-uranium (α-U) during plane strain compression and uniaxial compression to high strains at different temperatures. We combine a multiscale polycrystal constitutive model and detailed analysis of texture data to uncover the slip and twinning modes responsible for the formation of individual texture components. The analysis indicates that during plane strain compression, floor slip (001)[100] results in the formation of two pronounced {001}{001} texture peaks tilted 10–15° away from the normal toward the rolling direction. During both high-temperature (573 K) through-thickness compression and plane strain compression, the active slip modes are floor slip (001)[100] and chimney slip 1/2{110} <11¯0> with slightly different ratios. {130} <31¯0> deformation twinning is profuse during rolling and in-plane compression and decreases with increasing temperature, but is not as active for through-thickness compression. Lastly, we comment on some similarities between rolling textures of α-U, which has a c/a ratio of 1.734, and those that develop in hexagonal close packed metals with similarly high c/a ratios like Zn (1.856) and Cd (1.885) and are dominated by basal slip.

36 MATERIALS SCIENCE↗

Cost-Benefit Analysis of High-Strength Materials for Safety-Related Nuclear Reinforced Concrete Shear Walls

A numerical parametric investigation was conducted to determine the economic benefits of utilizing high-strength concrete and high-strength steel reinforcing bar (rebar) in reinforced concrete (RC) shear walls for nuclear power plant structures. Thick RC shear walls with low height-to-length aspect ratios (i.e., aspect ratios, h{sub w}/l{sub w}≤2.0, where h{sub w} is the wall height and l{sub w} is the wall length) are the most common lateral load resisting members in non-containment, safety-related nuclear structures. Typically, the walls are reinforced with multiple layers of overlapping, large-diameter vertical and horizontal rebar on each face. These heavily-reinforced walls provide large lateral stiffness and strength to prevent significant deformations and/or cracking that could compromise the integrity of the nuclear facility. However, this design adversely affects constructability as the rebar cages become highly congested. The time, labor, and materials required for this construction lead to high overall project costs. There has been a recent research thrust in the U.S. to allow high-strength rebar in non-nuclear building structures. While some of this research (e.g., steel properties, bond, anchorage) is applicable to RC structures in general, there are important differences specific to nuclear structures, such as much thicker walls (often controlled by radiation and thermal cycling), larger reinforcement ratios, and increased susceptibility to shear-controlled behavior (due to low aspect ratios). An important limiting factor for non-nuclear structures in seismic regions is the reduced deformation capacity of high-strength rebar as compared with normal-strength rebar used in current practice. Differences in seismic design philosophy lessen this limitation for nuclear structures (i.e., nuclear structures are designed more conservatively and allowed to undergo significantly smaller nonlinear displacements), making high-strength rebar a promising alternative to reinforcement currently permissible in the ACI 349-13 code requirements, which govern the design of nuclear safety-related concrete structures. To improve constructability and economy, this study investigates the benefits of using high-strength rebar [i.e., ASTM A615 Grade 550 (U.S. Grade 80); ASTM A1035 Grades 690 and 830 (U.S. Grades 100 and 120), where the grade indicates the specified yield strength of the steel in MPa (ksi)] together with high-strength concrete [compression strengths up to 138 MPa (20.0 ksi)] in RC nuclear shear walls. These strength ranges represent steel and concrete materials that are commercially available in the U.S. High-strength rebar can significantly reduce the required steel areas, thereby reducing material/fabrication costs, reducing rebar congestion (fewer/smaller bars and bar layers), and facilitating concrete consolidation and placement. Previous research on the use of high-strength rebar and/or high-strength concrete in nuclear RC structures does not exist in North America. A recent study assessed the potential of high-strength steel to reduce the rebar volume in non-nuclear building construction. In Japan, researchers investigated the use of high-strength materials in safety-related nuclear RC structures, but did not explore the economic benefits of these materials. To address this knowledge gap, the current paper describes a numerical parametric investigation on the potential cost savings of nuclear shear walls with high-strength rebar and/or concrete through comparisons against state-of-practice walls with normal-strength materials. Overall, the results demonstrate that significant economic benefits can be realized by implementing high-strength rebar and concrete in these structures. (authors)

36 MATERIALS SCIENCE↗

Estimating the mechanical properties of hydrating blended cementitious materials: An investigation based on micromechanics

The hydration model of Parrot & Killoh (1984) has been extended to blended cements and coupled to a micromechanical scheme similar to that of Pichler & Hellmich (2011) to estimate the Young modulus and the compressive strength of cementitious materials as a function of time. A finite aspect ratio of 7 is introduced to describe the shape of the hydrates and improve the estimate of the early age strength by the micromechanical scheme. Furthermore, accounting for the stress fluctuations in the cement paste partly explains the fact that the compressive strength of a concrete can be lower than that of its cement paste. Finally, the estimated physical properties are compared to numerous experimental measurements from the literature and new experimental measurements on blended cement pastes featuring significant weight fractions of limestone filler, fly ash or silica fume. It is shown that the present model slightly overestimates the dilution effect.

36 MATERIALS SCIENCE↗