Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONCENTRATION RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Modeling the processes of soil moisture in regulating microbial and carbon-nitrogen cycling

Soil carbon (C) and nitrogen (N) cycles and their complex responses to hydro-climatic forcing have gained increasing attention. While the temperature effects have been intensively studied, soil moisture response functions (SMRFs) are not well documented for various microbial and enzymatic processes due to the difficulties in directly measuring and differentiating the moisture effects on various processes. In this work we extended our C-only Microbial-ENzyme Decomposition (MEND) model to the C-N coupled MEND model with flexible element stoichiometry. Our model calibration showed good agreement between simulated and observed C:N ratios in soil organic matter and microbial biomass, as well as the ammonium and nitrate concentrations. We show that the selection of SMRFs for specific biogeochemical processes could result in significant differences in model simulated microbial and C-N processes. In particular, it is essential to account for the soil moisture effects on microbial dormancy and resuscitation, as the changes in microbial physiology under favorable or stressful conditions will exert strong controls on soil C and N dynamics. We also advocate the utilization of dynamic (time-variant) data (e.g., litter input, N deposition, soil temperature and moisture), instead of time-invariant data, to drive model simulations and analyses. Dynamic forcing data (particularly dynamic soil moisture) better represent the real-world climate and environmental conditions, which could facilitate more realistic modeling and understanding of soil C and nutrient cycling in a changing world.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Unveiling the influence of selective-area-regrowth interfaces on local electronic properties of GaN p-n junctions for efficient power devices

Here, we report correlated nanoscale mapping of the structure, composition, and properties of regrown GaN p-n junctions to identify how etching and non-planar regrowth processes limit diode performance via the introduction of unintentional dopants and defect states. p-GaN was selectively regrown in n-GaN trenches with SiO 2 masks of variable mask-to-trench-width ratio. Dilute Al layers were periodically introduced during regrowth as markers of the growth interface. Correlated nanoscale mapping of doping, conductivity, and dopant complexes was achieved with atom probe tomography (APT), scanning spreading resistance microscopy (SSRM), and cathodoluminescence (CL) spectroscopy, respectively. The Al marker layers, detected by APT, enabled reconstruction of the faceted growth interface and correlation of the dopant concentration with position and time. The p-GaN growth rate is proportional to the mask-to-trench width ratio while the dopant incorporation rate is invariant. At trench edges, magnesium incorporation is suppressed, and oxygen incorporation enhanced, due to preferential incorporation on the semi-polar growth surface, leading to compensation and less abrupt p-n junctions; the SiO 2 mask is a source of oxygen. Residual etch damage below the regrowth interface induces n-type and p-type conductivity, creating leakage pathways. The non-uniform Mg incorporation is driven by crystal anisotropy and is thus inherent to non-planar regrowth, but can be mitigated by engineering the regrowth interface and process parameters. The unprecedented integration of spatially resolved mapping of dopants, impurities, conductivity, and carrier type is a powerful approach to discriminating distinct factors that limit the performance of regrown diodes, enabling the rational optimization of process and device design.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Measurements of Intermediate Species in Fuel-Rich Oxidation of Ethylene, Toluene, and n -Decane

Polycyclic aromatic hydrocarbons (PAHs) are important precursors to the formation of soot and are also pollutant emissions from combustion devices, including internal combustion engines. To understand the formation of PAHs, the low-molecular-weight hydrocarbon chemistry leading to their formation needs to be understood. Toward this goal, fuel-rich oxidation of three different hydrocarbons, i.e., ethylene, toluene, and n-decane, has been investigated in an atmospheric pressure flow reactor at varying temperatures (1000–1350 K), equivalence ratios (φ = 3.0–12.0), and residence times of 0.25–1.5 s. The major C 1 to C 7 intermediates, such as methane, acetylene, ethylene, allene, propyne, propylene, vinylacetylene, 1,3-butadiene, cyclopentadiene, benzene, and toluene, were quantified using a gas chromatograph equipped with a flame ionization detector. The experimental tendency of intermediate species formation, e.g., the dependence of temperature, equivalence ratio, and residence time, was similar in ethylene oxidation and n-decane oxidation. The concentrations of intermediate species up to C 4 were higher in ethylene/n-decane oxidation than toluene oxidation, while a nearly equal or larger amount of C5–C7 species was produced in toluene oxidation. The experimental data were compared with modeling results using a detailed chemical kinetic mechanism. The calculated data using the kinetic model were in agreement with the experimental results. Additionally, a comprehensive kinetic analysis on the reaction pathways of each species was conducted to assess the differences in the oxidation chemistry with the change in the structure of hydrocarbons. In particular, in-depth analysis of benzene formation was performed, elucidating that two benzene formation pathways were important in ethylene and n-decane oxidation: (1) H elimination of the 2,4-cyclohexadienyl radical produced from the isomerization of the 2,4-cyclopentadienylmethyl radical, and (2) dehydrogenation of cyclohexadiene produced from reactions of vinyl radical with 1,3-butadiene. In toluene oxidation, it was found that benzene was primarily produced from toluene through the replacement of the methyl group with hydrogen.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Transformation of an Embedded Five-Membered Ring in Polycyclic Aromatic Hydrocarbons via the Hydrogen-Abstraction–Acetylene-Addition Mechanism: A Theoretical Study

Five-membered rings are constituents of many polycyclic aromatic hydrocarbons (PAHs) and their presence on the edges of large PAHs has been repeatedly observed experimentally. However, modern kinetic combustion models often do not consider the growth of PAHs through the transformation of the five-membered rings. Here, in connection with the above, we carried out a theoretical study of the mechanism of Hydrogen-Abstraction-aCetylene-Addition (HACA) transformation of an embedded five-membered ring on the armchair PAH edge to a six-membered ring, considering cyclopenta[d,e,f]phenanthrene (4,5-methylenephenanthrene) as a prototype system for this process. The potential energy surface for the reactions of cyclopenta[d,e,f]phenanthrenyl radicals produced by direct H abstractions from cyclopenta[d,e,f]phenanthrene with acetylene has been compiled at the G3(MP2,CC)//B3LYP/6-311G(d,p) level of theory including zero-point vibrational energy corrections. The computed energies and molecular parameters were then used to solve the Rice-Ramsperger-Kassel-Marcus Master Equation (RRKM-ME) in order to calculate reaction rate at various pressures and temperatures, which were fitted to modified Arrhenius equation for further kinetic modeling. The results show that the HACA transformation of the embedded five-membered ring to a six-membered ring is possible, albeit slow. The most viable reaction mechanism involves the R2 + C 2 H 2 reaction, where the acetylene molecules adds to a σ-radical in the six-membered ring adjacent to the five-membered ring via a low entrance barrier. The predominant product of R2 + C 2 H 2 is predicted to be 3 ethynyl 4H cyclopenta[def]phenanthrene Pr5 via immediate H elimination from the initial addition complex. Next, Pr5 undergoes H-assisted isomerization to 4aH-pentaleno[4,3,2,1-cdef]phenanthrene Pr4, and the latter adds an H atom eventually forming the 1-pyrenylmethyl radical Pr3: R2 + C 2 H 2 ⇌ 3 ethynyl 4H cyclopenta[def]phenanthrene (Pr5) + H ⇌ 4aH-pentaleno[4,3,2,1-cdef]phenanthrene (Pr4) + H Pr5 + H ⇌ Pr4 + H Pr4 + H → 1-pyrenylmethyl (Pr3) This HACA sequence may be competitive with the methyl radical addition to the R1 radical formed by H abstraction from the CH 2 group in the five-membered ring of cyclopenta[d,e,f]phenanthrene, which provides a pathway to pyrene following two H atom losses. Relative contributions of the two mechanisms of the five- to six-membered ring transformation would strongly depend on the branching ratios of the R1 and R2 radicals produced by the H abstractions and the available concentration of C 2 H 2 vs. CH 3 and hence differ in different flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Evaluating the Physisorption and Chemisorption of Iodine on Bismuth-Functionalized Carbon Foams

Bismuth-containing carbon materials have been shown to be highly promising sorbents for the capture of radioiodine. However, there is still a need to understand the effects of carbon and bismuth on the iodine sorption mechanism. In this study, we show the relationship between the physical and chemical sorption of iodine under different bismuth loading conditions. Here, highly porous and non-friable conductive carbon foams were prepared and bismuth was electrodeposited to provide strong iodine binding sites. For pure carbon foams, equal ratios of physisorbed and chemisorbed iodine-carbon phases were detected before desorption. As the concentration of bismuth increased, the chemisorption between bismuth and iodine dominated the total capture mechanism and physisorption was almost completely eliminated. Additionally, chemisorption of iodine depended upon the size and specific surface area of the bismuth particles present within the framework of the foam.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Seasonal variations in fire conditions are important drivers in the trend of aerosol optical properties over the south-eastern Atlantic

Abstract. From June to October, southern Africa produces one-third of the global biomass burning (BB) emissions by widespread fires. BB aerosols are transported westward over the south-eastern Atlantic with the mid-tropospheric winds, resulting in significant radiative effects. Ascension Island (ASI) is located midway between Africa and South America. From June 2016 to October 2017, a 17-month in situ observation campaign on ASI found a low single-scattering albedo (SSA) as well as a high mass absorption cross-section of black carbon (MACBC), demonstrating the strong absorbing marine boundary layer in the south-eastern Atlantic. Here we investigate the monthly variations of critical optical properties of BB aerosols, i.e. SSA and MACBC, during the BB seasons and the driving factors behind these variations. Both SSA and MACBC increase from June to August and decrease in September and October. The average SSA during the BB seasons is 0.81 at 529 nm wavelength, with the highest mean ∼ 0.85 in October and the lowest ∼ 0.78 in August. The absorption enhancement (Eabs) derived from the MACBC shows similar trends with SSA, with the average during the whole of the BB seasons at ∼ 1.96 and ∼ 2.07 in 2016 and 2017, respectively. As the Eabs is higher than the ∼ 1.5 commonly adopted value by climate models, this result suggests the marine boundary layer in the south-eastern Atlantic is more absorbing than model simulations. We find the enhanced ratio of BC to CO (ΔBC/ΔCO, equal to BC/ΔCO as the BC background concentration is considered to be 0) is well correlated with SSA and MACBC, providing a simple way to estimate the aerosol optical characteristics in the south-eastern Atlantic. The exponential function we proposed can approximate SSA and MACBC with BC/ΔCO, and when BC/ΔCO is small it can capture the rapid growth of SSA as BC/ΔCO decreases. BC/ΔCO is influenced by combustion conditions and aerosol scavenging. From the analysis of the location of BB, the primary source fuel, the water content in the fuel, combined with the mean cloud cover and precipitation in the transport areas of the BB plume, we conclude that the increase in BC/ΔCO from June to August is likely to be caused by burning becoming more flaming. The reduction in the water content of fuels may be responsible for the change in the burning conditions from June to August. The decrease in BC/ΔCO in September and October may be caused by two factors, one being a lower proportion of flaming conditions, possibly associated with a decrease in mean surface wind speed in the burning area, and the other being an increase in precipitation in the BB transport pathway, leading to enhanced aerosol scavenging, which ultimately results in an increase in SSA and MACBC.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The annual cycle and sources of relevant aerosol precursor vapors in the central Arctic during the MOSAiC expedition

Abstract. In this study, we present and analyze the first continuous time series of relevant aerosol precursor vapors from the central Arctic (north of 80° N) during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition. These precursor vapors include sulfuric acid (SA), methanesulfonic acid (MSA), and iodic acid (IA). We use FLEXPART simulations, inverse modeling, sulfur dioxide (SO2) mixing ratios, and chlorophyll a (chl a) observations to interpret the seasonal variability in the vapor concentrations and identify dominant sources. Our results show that both natural and anthropogenic sources are relevant for the concentrations of SA in the Arctic, but anthropogenic sources associated with Arctic haze are the most prevalent. MSA concentrations are an order of magnitude higher during polar day than during polar night due to seasonal changes in biological activity. Peak MSA concentrations were observed in May, which corresponds with the timing of the annual peak in chl a concentrations north of 75° N. IA concentrations exhibit two distinct peaks during the year, namely a dominant peak in spring and a secondary peak in autumn, suggesting that seasonal IA concentrations depend on both solar radiation and sea ice conditions. In general, the seasonal cycles of SA, MSA, and IA in the central Arctic Ocean are related to sea ice conditions, and we expect that changes in the Arctic environment will affect the concentrations of these vapors in the future. The magnitude of these changes and the subsequent influence on aerosol processes remains uncertain, highlighting the need for continued observations of these precursor vapors in the Arctic.

Boyer, Matthew↗
DOE OSTI2024

High Mobility, High Carrier Density SnSe 2 Field‐Effect Transistors with Ultralow Subthreshold Swing and Gate‐Controlled Photoconductance Switching

2D and layered semiconductors are considered as promising electronic materials, particularly for applications that require high carrier mobility and efficient field-effect switching combined with mechanical flexibility. To date, however, the highest mobility has been realized primarily at low carrier concentration. Here, it is shown that few-layer/multilayer SnSe 2 gated by a solution top gate combines very high room-temperature electron mobility (up to 800 cm 2 V −1 s −1 ), along with large on-off current ratios (>10 5 ) and a subthreshold swing below the thermodynamic limit (50 mV per decade) in field-effect devices, at exceptionally large sheet carrier concentrations of ≈10 13 cm −2 . Observed mobility enhancements upon partial depletion of the channel point to near-surface defects or impurities as the mobility-limiting scattering centers. Under illumination, the resulting gap states give rise to gate-controlled switching between positive and negative photoconductance. The results qualify SnSe 2 as a promising layered semiconductor for flexible and wearable electronics, as well as for the realization of advanced approaches to photodetection.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Engineering Calcium-Bearing Mineral/Hydrogel Composites for Effective Phosphate Recovery

Effectively recovering phosphate from wastewater streams and reutilizing it as a nutrient will critically support sustainability. Here, to capture aqueous phosphate, we developed novel mineral-hydrogel composites composed of calcium alginate, calcium phosphate (CaP), and calcium silicate (CSH) (CaP + CSH/Ca-Alg). The CaP + CSH/Ca-Alg composites were synthesized by dripping a sodium alginate (Na-Alg) solution with ionic precursors into a calcium chloride bath. To change the mineral seed’s properties, we varied the calcium bath concentrations and the ionic precursor (sodium dibasic phosphate (NaH 2 PO 4 ) and/or sodium silicate (Na 2 SiO 3 )) amounts and their ratios. The added CSH in the mineral-hydrogel composites resulted in the release of calcium and silicate ions in phosphate-rich solutions, increasing the saturation ratio with respect to calcium phosphate within the mineral-hydrogel composites. The CSH addition to the mineral-hydrogel composites doubled the phosphate removal rate while requiring lesser initial amounts of Ca and P materials for synthesis. Furthermore, by incorporating both CSH and CaP mineral seeds in composites, we achieved a final concentration of 0.25 mg-P/L from an initial 6.20 mg-P/L. Moreover, the mineral-hydrogel composites can remove phosphate even under CaP undersaturated conditions. This suggests their potential to be a widely applicable and environmentally-sustainable treatment and recovery method for nutrient-rich wastewater.

42 ENGINEERING↗
DOE OSTI2026

Daily evapotranspiration changes during heatwaves at 32 NEON sites, 2019-2021

This dataset provides partitioned evapotranspiration (ET, the combined loss of water from soil and plant surfaces) anomalies during heatwave events—soil evaporation (E) and transpiration (T)—for 268 heatwave events across 32 National Ecological Observatory Network (NEON) flux sites in the contiguous United States from 2019–2021. Using an ensemble of four high-frequency turbulence methods (Flux-variance Similarity, Conditional Eddy Covariance [CEC], CEC with Water-Use Efficiency, and Conditional Eddy Accumulation; see Zahn and Bou-Zeid 2024), half-hourly transpiration-to-evapotranspiration (T/ET) ratios were derived from 20 hertz (Hz, cycles per second) eddy covariance measurements of carbon dioxide (CO₂) and water vapor (H₂O) concentrations. The dataset spans six vegetation types including evergreen and deciduous forests, grasslands, cultivated crops, shrublands, and emergent herbaceous wetlands. Data Package Contents: The dataset includes a single CSV (comma-separated values) file containing daily anomalies (deviations from baseline conditions) for transpiration (Delta_T), evaporation (Delta_E), total evapotranspiration (Delta_ET), and T/ET ratio (Delta_T_ET) during each day of identified heatwave events. The file also includes site codes, dates, heatwave event identifiers, and day-of-heatwave indicators. The CSV file can be opened with spreadsheet software (Microsoft Excel, Google Sheets) or programming environments (Python, R, MATLAB). This resource enables researchers to investigate ecosystem-specific responses to thermal extremes, validate land surface model partitioning of ET fluxes, and examine feedbacks between water cycling and surface energy balance during heatwaves. The dataset is particularly valuable for studies linking vegetation hydraulic strategies to climate resilience, as it captures the divergent responses of shallow-rooted versus deep-rooted ecosystems. Potential applications include improving drought early warning systems, informing irrigation management strategies, and advancing our mechanistic understanding of land-atmosphere interactions under extreme heat conditions.

Day of Heatwave↗
DOE OSTI2025

Comments on “Failure analysis of corroded hydrogen-blended natural gas pipelines based on finite element analysis and genetic algorithm-back propagation neural network” [262 (2025) 111174]

This is a brief commentary paper to highlight and discuss the determination of hydrogen concentration in pipeline steel, effect of hydrogen embrittlement (HE) on the mechanical properties of the material, burst strength of corroded pipelines using finite element analysis (FEA) simulations, and curve-fit models for assessing remaining strength of X80 corroded pipelines for transporting hydrogen blended natural gas. Recently, Xie et al. [1] proposed a methodology to quantify the impact of HE on material properties and numerically determined burst pressure of X80 corroded pipelines. However, their HE quantification overestimated the degradation of tensile strength for hydrogen blending ratios beyond the original data range, and their FEA results of burst pressure are nonconservative. This work thus recharacterized the hydrogen concentration in the steel pipeline and the effect of HE on tensile strength, and then redetermined burst pressures for a set of typical corrosion defect cases considered by Xie et al. [1] based on an experimentally validated FEA modelling method. With the new FEA results, two empirical corrosion models were proposed for X80 corroded pipelines for hydrogen service. At zero hydrogen blending ratio, the novel empirical models predict burst pressures to be consistent with the industry-accepted corrosion models. Furthermore, both the numerical simulation method and the novel corrosion models are significant contributions to the pipeline industry and the hydrogen community. Application of these results will enhance the safety, reliability, and integrity of natural gas pipelines when used to transport hydrogen.

Burst pressure prediction↗
DOE OSTI2021

Reburning of Animal Waste Based Biomass with Coals for NO x Reduction, Part II: Dairy Biomass (DB) and Coal–DB Blends

Concentrated animal feeding operations (both slaughter and dairy cattle) lead to land, water, and air pollution if waste storage and handling systems are not effectively managed. At the same time, cattle biomass (CB), which includes both slaughter/feedlot biomass (FB) and dairy biomass (DB), have the potential to be a source of green energy at coal-fired power plants. Part I presented results on NOx reductions with pure FB or Coal: FB blends as reburn fuels. Part II deals with results from reburning with pure DB or Coal: DB blends as reburn fuels. A mixture of NG with a small amount of NH3 was used to generate the baseline NOx of 400–420 ppm (or 185–194 g/GJ). NOx emissions were found to be reduced by as much as 96% when reburning with FB. The effects of reburn fuel type, equivalence ratio (ER RBZ ) in the reburn zone, vitiated air, several injection configurations of reburn fuel and initial NO concentrations on NOx emissions were investigated. The ER RBZ shows a significant effect on the NOx reduction. The 20% heat input by reburning was the better operating condition for the long-term operation due to its ash production. The results reveal that reburn with DB fuels is an effective technology for NOx emission control when the initial NOx emission is higher than 275 ppm (or 127 g/GJ or 0.3 lb/MMBtu).

09 BIOMASS FUELS↗
DOE OSTI2023

Characterization of Fe-6Si Soft Magnetic Alloy Produced by Laser-Directed Energy Deposition Additive Manufacturing

Abstract Commercial electrical steels, Fe-Si alloys with < 4 wt.% Si, are inexpensive and efficient materials for electrical power conversion. Further efficiency improvements require increasing the silicon concentration to 6 wt.%, at which point the material becomes brittle and difficult to form by conventional rolling and sheet fabrication methods. Additive manufacturing stands to overcome challenges with commercial manufacturing techniques by leveraging near-net-shape fabrication. The wide array of process conditions provides additive manufacturing with increased flexibility, enabling control over the microstructure and mechanical properties. This work explores the microstructures and magnetic properties of ring-shaped Fe-Si alloys produced using concentric and cross-hatch tool paths on a laser-directed energy deposition additive manufacturing system. Concentric-built samples exhibit elongated grain structures while cross-hatch-built samples comprise lower aspect ratio grain structures. Thermal finite element analysis simulations model the stress conditions produced by the different scan path geometries. Microhardness measurements probe the mechanical properties as a function of anneal temperature, providing a qualitative understanding of the intergranular defect density. Soft magnetic properties measured under quasistatic and AC conditions show frequency- and microstructure-dependent coercivity and permeability. Finally, analysis of the core loss quantifies how the build strategies and thermal treatments influence efficiency in electrical power conversion applications. Understanding the influences of scan path geometry and thermal treatment provides a pathway towards application of additively manufactured soft magnetic materials.

Adamczyk, Jesse M.↗
DOE OSTI2020

Cell-free styrene biosynthesis at high titers

Styrene is an important petroleum-derived molecule that is polymerized to make versatile plastics, including disposable silverware and foamed packaging materials. Finding more sustainable methods, such as biosynthesis, for producing styrene is essential due to the increasing severity of climate change as well as the limited supply of fossil fuels. Recent metabolic engineering efforts have enabled the biological production of styrene in Escherichia coli, but styrene toxicity and volatility limit biosynthesis in cells. To address these limitations, we have developed a cell-free styrene biosynthesis platform. The cell-free system provides an open reaction environment without cell viability constraints, which allows exquisite control over reaction conditions and greater carbon flux toward product formation rather than cell growth. The two biosynthetic enzymes required for styrene production were generated via cell-free protein synthesis and mixed in defined ratios with supplemented L-phenylalanine and buffer. By altering the time, temperature, pH, and enzyme concentrations in the reaction, this approach increased the cell-free titer of styrene from 5.36 ± 0.63 mM to 40.33 ± 1.03 mM, the highest amount achieved using biosynthesis without process modifications and product removal strategies. Finally, cell-free systems offer a complimentary approach to cellular synthesis of small molecules, which can provide particular benefits for producing toxic molecules.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Chemical Interplay of Silicon and Graphite in a Composite Electrode in SEI Formation

In this study, we investigated the effect of the Si/graphite weight ratio in half-cells on the solid electrolyte interphase (SEI) layer's chemistry. The nominal concentrations of active materials were (wt % Si/wt % Gr) 15/73, 30/58, 60/28, and 80/0. The electrolyte in the cells consisted of either 1.2 M LiPF 6 in ethylene carbonate/ethyl methyl carbonate (3:7 by wt) or 1.2 M LiPF 6 in ethylene carbonate:ethyl methyl carbonate (3:7 by wt) + 10 wt % fluoroethylene carbonate. These coin cells were cycled five times at the C/10 rate. As expected, the addition of silicon to the electrode significantly increased the measured capacity. Examination of the aged composite material showed that the electrolyte influenced the concentration of chemical environments on the surface. Depth profiling revealed that these concentrations of surface environments changed with sputtering time. A statistics-of-mixtures model was used to deconvolute how silicon and graphite interacted during the formation of these species and how the interaction changed with depth.

25 ENERGY STORAGE↗
DOE OSTI2021

Ultrasound-Assisted Nonthermal, Nonequilibrium Separation of Organic Molecules from Their Binary Aqueous Solutions: Effect of Solute Properties on Separation

The separation of organic molecules in downstream processes, such as distillation, plays a vital role in biobased chemical production. A comprehensive study was performed here using ultrasonic energy to separate 11 organic molecules from their binary aqueous solutions under nonthermal, nonequilibrium, and phase-change free conditions. A batch sonoseparator with a three-stage mist collection unit allowed direct analysis of ultrasound-generated mist with an HPLC/GC and differentiation and quantification of the vapor and mist. The results showed that the alcohols (1-butanol, ethanol, 1-propanol, and methanol) and acetone were enriched in the ultrasound-generated mist with enrichment ratios of 3.2–5. On the other hand, ethylene glycol, glycerol, γ-valerolactone (GVL), glucose, and sucrose were diluted with dilution ratios in the range of 2.04–15.7 in the mist and vapor generated by ultrasound (or concentrated in the bulk solution). No enrichment nor dilution of acetic acid was observed. The role of various physicochemical parameters such as dynamic viscosity, surface tension, Henry’s law of solubility constant, vapor pressure, and octanol–water partition coefficient in the enrichment was examined. Furthermore, the hydrophobicity of the organic molecules represented by the octanol–water partition coefficient was found to play a crucial role in determining the separation characteristics of the molecules in ultrasound-generated mist and vapor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High-pressure high-temperature synthesis and characterization of B 10 C

The boron-rich boron carbide materials have been traditionally synthesized by adding boron powder to B 4 C material and subjecting it to hot pressing sintering for materials composition containing 8.8–20 at. % carbon in boron (composition range of B 10.4 C to B 4 C). Our study explores a synthesis route for B 10 C starting from high-purity boron and carbon and direct conversion under high pressure and high temperature (HPHT) conditions of 2000 °C and 6–8 GPa. Synthesis was verified via x-ray diffraction analysis, showing the conversion of the high-purity boron and carbon powder mixture into a hexagonal B 10 C structure (R-3m space group) with lattice parameters of a = b = 5.6115 Å and c = 12.197 Å. The concentration of boron was measured through x-ray photoelectron spectroscopy, confirming the B 10 C ratio. The measured nanoindentation mean hardness of B 10 C was 40 GPa. Raman spectroscopy of the HPHT synthesized sample shows characteristic vibrational breathing modes of boron icosahedron and an additional intense band at a vibrational frequency of 380 cm –1 . This Raman band, which appears notably weaker in earlier studies and B 4 C samples, is assigned to the linear chain of B–B–B and attributed to the maximal incorporation of boron within the hexagonal structure.

36 MATERIALS SCIENCE↗