Search NASA⌕ Search

SEARCH · Search NASA

Results for “Constitutive models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Elastic model for crimped collagen fibrils

A physiologic constitutive expression is presented in algorithmic format for the nonlinear elastic response of wavy collagen fibrils found in soft connective tissues. The model is based on the observation that crimped fibrils in a fascicle have a three-dimensional structure at the micron scale that we approximate as a helical spring. The symmetry of this wave form allows the force/displacement relationship derived from Castigliano's theorem to be solved in closed form: all integrals become analytic. Model predictions are in good agreement with experimental observations for mitral-valve chordae tendinece.

Evaluation Studies↗
NASA NTRS1988

Fatigue damage modeling for coated single crystal superalloys

A high temperature, low-cycle fatigue life prediction method for coated single crystal nickel-base superalloys is being developed. The method is being developed for use in predicting crack initiation life of coated single crystal turbine airfoils. Although the models are being developed using coated single crystal PWA 1480, they should be readily adaptable to other coated nickel-base single crystal materials. The coatings choosen for this effort were of two generic types: a low pressure plasma sprayed NiCoCrAlY overlay, designated PWA 286, and an aluminide diffusion, designated PWA 273. In order to predict the useful crack initiation life of airfoils, the constitutive and failure behavior of the coating/substrate combination must be taken into account. Coatings alter the airfoil surface microstructure and are a primary source from which cracks originate. The adopted life prediction approach addresses this complexity by separating the coating and single crystal crack initiation regimes. This provides a flexible means for using different life model formulations for the coating and single crystal materials. At the completion of this program, all constitutive and life model formulations will be available in equation form and as software. The software will use the MARC general purpose finite element code to drive the constitutive models and calculate life parameters.

Nissley, David M.↗
NASA NTRS1989

Nonlinear mesomechanics of composites with periodic microstructure

This work is concerned with modeling the mechanical deformation or constitutive behavior of composites comprised of a periodic microstructure under small displacement conditions at elevated temperature. A mesomechanics approach is adopted which relates the microimechanical behavior of the heterogeneous composite with its in-service macroscopic behavior. Two different methods, one based on a Fourier series approach and the other on a Green's function approach, are used in modeling the micromechanical behavior of the composite material. Although the constitutive formulations are based on a micromechanical approach, it should be stressed that the resulting equations are volume averaged to produce overall effective constitutive relations which relate the bulk, volume averaged, stress increment to the bulk, volume averaged, strain increment. As such, they are macromodels which can be used directly in nonlinear finite element programs such as MARC, ANSYS and ABAQUS or in boundary element programs such as BEST3D. In developing the volume averaged or efective macromodels from the micromechanical models, both approaches will require the evaluation of volume integrals containing the spatially varying strain distributions throughout the composite material. By assuming that the strain distributions are spatially constant within each constituent phase-or within a given subvolume within each constituent phase-of the composite material, the volume integrals can be obtained in closed form. This simplified micromodel can then be volume averaged to obtain an effective macromodel suitable for use in the MARC, ANSYS and ABAQUS nonlinear finite element programs via user constitutive subroutines such as HYPELA and CMUSER. This effective macromodel can be used in a nonlinear finite element structural analysis to obtain the strain-temperature history at those points in the structure where thermomechanical cracking and damage are expected to occur, the so called damage critical points of the structure.

Walker, Kevin P.↗
NASA NTRS1983

Research and development program for the development of advanced time-temperature dependent constitutive relationships. Volume 2: Programming manual

The results of a 10-month research and development program for nonlinear structural modeling with advanced time-temperature constitutive relationships are presented. The implementation of the theory in the MARC nonlinear finite element code is discussed, and instructions for the computational application of the theory are provided.

Cassenti, B. N.↗
NASA NTRSDate not supplied

Development of the Artemis Distributed Simulation FOMs

The National Aeronautics and Space Administration (NASA) is formulating and developing the Artemis Program, a collaboration with domestic commercial and international partners that will establish a long term human presence on the Moon and extend human exploration beyond the Earth-Moon system ahead of exploring Mars. These Artemis partners are developing a portfolio of space and surface systems to support human missions to the lunar surface and beyond. The Artemis systems will provide the mobility, habitation, and logistics infrastructure that will support human exploration and foster robust scientific investigations. Each partner will contribute one or more elements to the Artemis Program with NASA having the overarching responsibility for defining the Artemis architecture and guiding the integration of this complex system of space systems. To successfully accomplish this audacious task, NASA will rely on the development and execution of many complex models and simulations. Many of these simulations will be provided by the Artemis partners. While each of these simulations will provide important insight into the characteristics and performance of an associated system, individually they will not provide insight into the integrated performance of the architecture and the system of systems working in concert to execute a given Artemis mission. To address this need, NASA is developing a distributed simulation capability called the Artemis Distributed Simulation (ADS). ADS’s distributed nature supports the complex aggregation of constituent Artemis element simulations. Artemis partner simulations will be able to join into an ADS-based distributed simulation and interact with other Artemis element simulations while limiting the exposure of proprietary designs and data. ADS is defining a distributed simulation capability built on international simulation interoperability standards, specifically the High Level Architecture (HLA) and the Space Reference Federation Object Model (SpaceFOM). While HLA and SpaceFOM provide the substantive necessary technology basis for ADS, additional common datatypes, message definitions, and execution protocols are required. These extensions constitute the ADS Federation Object Model (FOM). This paper describes the fundamental architectural elements of ADS and the FOM extensions needed to support the complex nature of the Artemis Program. This includes the examination of the ADS FOM modules, ADS base datatypes, ADS SpaceFOM Object Class extensions, new ADS Object Classes, and new ADS Interaction Classes.

HLA↗
NASA NTRSDate not supplied

Development of the Artemis Distributed Simulation FOMs

The National Aeronautics and Space Administration (NASA) is formulating and developing the Artemis Program, a collaboration with domestic commercial and international partners that will establish a long term human presence on the Moon and extend human exploration beyond the Earth-Moon system ahead of exploring Mars. These Artemis partners are developing a portfolio of space and surface systems to support human missions to the lunar surface and beyond. The Artemis systems will provide the mobility, habitation, and logistics infrastructure that will support human exploration and foster robust scientific investigations. Each partner will contribute one or more elements to the Artemis Program with NASA having the overarching responsibility for defining the Artemis architecture and guiding the integration of this complex system of space systems. To successfully accomplish this audacious task, NASA will rely on the development and execution of many complex models and simulations. Many of these simulations will be provided by the Artemis partners. While each of these simulations will provide important insight into the characteristics and performance of an associated system, individually they will not provide insight into the integrated performance of the architecture and the system of systems working in concert to execute a given Artemis mission. To address this need, NASA is developing a distributed simulation capability called the Artemis Distributed Simulation (ADS). ADS’s distributed nature supports the complex aggregation of constituent Artemis element simulations. Artemis partner simulations will be able to join into an ADS-based distributed simulation and interact with other Artemis element simulations while limiting the exposure of proprietary designs and data. ADS is defining a distributed simulation capability built on international simulation interoperability standards, specifically the High Level Architecture (HLA) and the Space Reference Federation Object Model (SpaceFOM). While HLA and SpaceFOM provide the substantive necessary technology basis for ADS, additional common datatypes, message definitions, and execution protocols are required. These extensions constitute the ADS Federation Object Model (FOM). This paper describes the fundamental architectural elements of ADS and the FOM extensions needed to support the complex nature of the Artemis Program. This includes the examination of the ADS FOM modules, ADS base datatypes, ADS SpaceFOM Object Class extensions, new ADS Object Classes, and new ADS Interaction Classes.

HLA↗
NASA NTRS2014

NASA Trapezoidal Wing Simulation Using Stress-w and One- and Two-Equation Turbulence Models

The Wilcox 2006 stress-omega model (also referred to as WilcoxRSM-w2006) has been implemented in the NASA Langley code CFL3D and used to study a variety of 2-D and 3-D configurations. It predicted a variety of basic cases reasonably well, including secondary flow in a supersonic rectangular duct. One- and two-equation turbulence models that employ the Boussinesq constitutive relation were unable to predict this secondary flow accurately because it is driven by normal turbulent stress differences. For the NASA trapezoidal wing at high angles of attack, the WilcoxRSM-w2006 model predicted lower maximum lift than experiment, similar to results of a two-equation model.

Rodio, J. J.↗
NASA NTRS1993

Pyrotechnic modeling for the NSI and pin puller

A discussion concerning the modeling of pyrotechnically driven actuators is presented in viewgraph format. The following topics are discussed: literature search, constitutive data for full-scale model, simple deterministic model, observed phenomena, and results from simple model.

Powers, Joseph M.↗
NASA NTRS1981

Topology of Saturn's main magnetic field

The reported analysis of Saturn's main magnetic field takes into account the data obtained by Voyager 1 during its close flyby of Saturn in November 1980. A magnetic field model for the analysis of Saturn's main field in which the distributed ring currents are explicitly modelled is constructed. The considered internal field parameters constitute a first approximation to Saturn's main field. Several model current systems that might be expected on physical grounds to be active in Saturn's magnetosphere are considered. It is pointed out that certain aspects of Saturn's main magnetic field relevant to the planet's interior have been discussed by Stevenson (1980). In particular, the unexpectedly small dipole moment seems to be consistent with the gravitational settling of helium, which leads to a much smaller electrically conducting and convecting region than would be expected of a homogeneous distribution of hydrogen and helium.

Acuna, M. H.↗
NASA NTRS1993

Remarks on turbulent constitutive relations

The paper demonstrates that the concept of turbulent constitutive relations can be used to construct general models for various turbulent correlations. Some of the Generalized Cayley-Hamilton formulas for relating tensor products of higher extension to tensor products of lower extension are introduced. The combination of dimensional analysis and invariant theory can lead to 'turbulent constitutive relations' (or general turbulence models) for, in principle, any turbulent correlations. As examples, the constitutive relations for Reynolds stresses and scalar fluxes are derived. The results are consistent with ones from Renormalization Group (RNG) theory and two-scale Direct-Interaction Approximation (DIA) method, but with a more general form.

Shih, Tsan-Hsing↗
NASA NTRS1995

A new model for yaw attitude of Global Positioning System satellites

Proper modeling of the Global Positioning System (GPS) satellite yaw attitude is important in high-precision applications. A new model for the GPS satellite yaw attitude is introduced that constitutes a significant improvement over the previously available model in terms of efficiency, flexibility, and portability. The model is described in detail, and implementation issues, including the proper estimation strategy, are addressed. The performance of the new model is analyzed, and an error budget is presented. This is the first self-contained description of the GPS yaw attitude model.

Bar-Sever, Y. E.↗
NASA NTRS2018

Modeling Fiber Kinking at the Microscale and Mesoscale

A computational micromechanics (CMM) model is employed to interrogate the assumptions of a recently developed mesoscale continuum damage mechanics (CDM) model for fiber kinking. The CMM model considers an individually discretized three dimensional fiber and surrounding matrix accounting for nonlinearity in the fiber, matrix plasticity, fiber/matrix interface debonding, and geometric nonlinearity. Key parameters of the CMM model were measured through experiments. In particular, a novel experimental technique to characterize the in situ longitudinal compressive strength of carbon fibers through indentation of micropillars is presented. The CDM model is formulated on the basis of Budiansky's fiber kinking theory (FKT) with a constitutive deformation-decomposition approach to alleviate mesh size sensitivity. In contrast to conventional mesoscale CDM models that prescribe a constitutive response directly, the response of the proposed model is an outcome of material nonlinearity and large rotations of the fiber direction following FKT. Comparison of the predictions from the CMM and CDM models shows remarkable correlation in strength, post-peak residual stress, and fiber rotation, with less than 10% difference between the two models in most cases. Additional comparisons are made with several fiber kinking models proposed in the literature to highlight the efficacy of the two models. Finally, the CMM model is exercised in parametric studies to explore opportunities to improve the longitudinal compression strength of a ply through the use of nonconventional microstructures.

Herraez, Miguel↗
NASA NTRS1999

Strain Rate Dependent Modeling of Polymer Matrix Composites

A research program is in progress to develop strain rate dependent deformation and failure models for the analysis of polymer matrix composites subject to high strain rate impact loads. Strain rate dependent inelastic constitutive equations have been developed to model the polymer matrix, and have been incorporated into a micromechanics approach to analyze polymer matrix composites. The Hashin failure criterion has been implemented within the micromechanics results to predict ply failure strengths. The deformation model has been implemented within LS-DYNA, a commercially available transient dynamic finite element code. The deformation response and ply failure stresses for the representative polymer matrix composite AS4/PEEK have been predicted for a variety of fiber orientations and strain rates. The predicted results compare favorably to experimentally obtained values.

Goldberg, Robert K.↗
NASA NTRS1996

Analysis of New Composite Architectures

Efficient and accurate specialty finite elements methods to analyze textile composites were developed and are described. Textile composites present unique challenges to the analyst because of the large, complex 'microstructure'. The geometry of the microstructure is difficult to model and it introduces unusual free surface effects. The size of the microstructure complicates the use of traditional homogenization methods. The methods developed constitute considerable progress in addressing the modeling difficulties. The details of the methods and attended results obtained therefrom, are described in the various chapters included in Part 1 of the report. Specific conclusions and computer codes generated are included in Part 2 of the report.

Whitcomb, John D.↗
NASA NTRSDate not supplied

Kinetic Model Development of the Carbon Vapor Deposition Reactor to Predict Performance Versus Design

To enable complete closure of a Sabatier-based atmosphere revitalization system where oxygen recovery is predicated by carbon dioxide reduction to methane and water, there must be a means of recovering the hydrogen from the byproduct methane. Honeywell’s carbon vapor deposition (CVD) reactor is a potential technology that provides a thermochemical means by which methane decomposes at high temperatures (> 1,000 °C) into hydrogen, solid carbon, and a small percentage of hydrocarbons. This advanced methane pyrolysis reactor utilizes a carbon fiber substrate to capture and immobilize the solid pyrolytic carbon rather than allowing continuation toward undesirable soot. The CVD reactor is a highly dynamic system whose characteristic geometry changes while operating. The reactor model was developed to provide predictive performance assessment capabilities at different operating conditions, geometries, and configurations to aid in technology development. Modeling of the CVD reactor considered the multitude of simultaneous and interdependent physicochemical processes that are entailed, including: (1) the homogeneous gas-phase pyrolysis reactions, (2) the heterogeneous deposition reactions, and (3) the transport of gaseous species in the reactor domains. A 1-D CVD reactor model was developed based on a general packed-bed, axial-dispersion plug flow reactor model with a solid substrate balance to account for carbon deposition. The model includes 59 species and 243 reactions constituting the methane pyrolysis reaction network, carbon deposition, and interconversions of oxygenate species. The reactor model was compared to brassboard test data, where it was shown to be able to capture the pertinent physicochemical phenomena as evidenced by its agreement with short-duration run data (i.e., looking at different temperature and flow rate conditions), as well as trend agreement with the brassboard reactor’s long-duration test data. Recommendations are provided on further model development steps as well as its use cases.

Air Revitalization↗
NASA NTRS2006

Multiscale Modeling of Grain-Boundary Fracture: Cohesive Zone Models Parameterized From Atomistic Simulations

A multiscale modeling strategy is developed to study grain boundary fracture in polycrystalline aluminum. Atomistic simulation is used to model fundamental nanoscale deformation and fracture mechanisms and to develop a constitutive relationship for separation along a grain boundary interface. The nanoscale constitutive relationship is then parameterized within a cohesive zone model to represent variations in grain boundary properties. These variations arise from the presence of vacancies, intersticies, and other defects in addition to deviations in grain boundary angle from the baseline configuration considered in the molecular dynamics simulation. The parameterized cohesive zone models are then used to model grain boundaries within finite element analyses of aluminum polycrystals.

Glaessgen, Edward H.↗