Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Prolonged triboluminescence in clays and other minerals

The decay curves of various triboluminescent-excited materials were obtained, including well-crystallized and poorly crystallized kaolin, bentonite, quartz, sodium chloride, and chalk calcite. A qualitative increase in triboluminescence was observed for kaolin dipped in water or tryptophan solution compared to dry kaolin, and for frozen kaolin and montmorillonite pastes. Theoretical explanations for the tryptophan effect are discussed.

Lahav, N.↗

Solar irradiance variations and solar activity

A mean value for the 1 AU total solar irradiance of 1368.2 W/sq m and a downward trend of 0.05% per year were derived from measurements by the Active Cavity Radiometer Irradiance Monitor (ACRIM) experiment on the Solar Maximum Mission during 1980. Distinct temporary solar irradiance decreases associated with solar activity maxima were observed with a series of nine dips from April to October recurring at fairly regular intervals averaging 24 days. The decreases correlate inversely with sunspot area, 2800-MHz flux, and Zurich sunspot number. Dominant periods common to the irradiance and sunspot area power spectra link the irradiance decreases to sunspot flux deficit in solar active regions. Evidence of significant total irradiance modulation by facular flux excess is cited. A persistent radiative cycle of active regions consistent with the ACRIM irradiance results and the morphology of solar active regions was found. The pattern of regularly recurrent active region maxima between April and October suggests an asymmetry in solar activity generation during this period.

Willson, R. C.↗

A review of aeroassisted orbit transfer

The development of a theory of aeroassisted orbital plane change maneuvers and necessary equipment is traced and an assessment is made of potential applications. Synergetic plane changes are effected through a combination of aerodynamic and propulsive forces involving the dip of an orbiting vehicle into the atmosphere, performance of an aerodynamic turn using thrust if necessary, then reboosting into a reconfigured orbit. The Orbiter is noted to possess large synergetic plane change capability, and configurations of spacecraft such as the Venus Orbiting Imaging radar for using aeroassist to brake interplanetary velocities before establishing orbits are described. Technology advances necessary to construct effective aerobrake, aerocapture, and orbital transfer vehicles are explored, including fabrication of inflatable ballutes, lighter L/D configurations, and lifting brakes, which are considered to be minor extensions of current capabilities.

Walberg, G. D.↗

Large-area silicon-on-ceramic substrates for low-cost solar cells

The SCIM (Silicon-Coating-By-Inverted Meniscus) process to produce SOC (silicon-on-ceramic) substrates has been investigated for various growth conditions and substrate velocities (4-30 cm/min). Slotted mullite-based substrates (10-cm-wide by 100-cm-long) have been coated with smooth, continuous silicon layers, with thicknesses in the range from 100 to 300 microns. Thermal stress (which can be a problem at low velocities) is prevented by proper thermal design. The highest SCIM-coated SOC cell efficiencies to date are 7.5% (AM1, AR) as compared to 10.5% (AM1, AR) for dip-coated SOC cells. Substantial improvements in cell efficiency are expected when high purity parts are installed in the SCIM-coater.

Schuldt, S. B.↗

Circinus X-1 - X-ray observations with SAS 3

Eight observations of Cir X-1 with SAS 3, each lasting 1-6 days, have yielded a variety of new phenomena, viz., a luminous state of steady emission, rapid large-intensity dips, an extremely rapid X-ray transition, and bright flares. Through searches for periodic X-ray pulsations were carried out on data trains of duration up to 6 days; upper limits for pulsations with periods greater than 250 microsec range down to 0.3%. Aperiodic variability with characteristic times of 0.4-1.0 sec was observed but is not well characterized by a simple shot noise model. No millisecond bursts were observed during 40,000 sec in three separate observations. Spectral parameters derived before and after several X-ray transitions indicate that the transitions are not due to absorption of X-rays by intervening gas. Models previously proposed for the Cir X-1 system do not easily provide explanations for all the complex phenomena reported herein.

Dower, R. G.↗

Evidence for a poleward meridional flow on the sun

Two subsets of all polar zone filaments, designated polemost filament and polar filament bands, are defined for observational study of their behavior, which is compared with the evolution of the polar magnetic field over Howard and LaBonte's (1981) activity cycle. The magnetic data show that the polar magnetic fields are built up and maintained by the episodic arrival of discrete f-polarity regions originating in active region latitudes and subsequently drifting to the poles. F-polarity regions are carried poleward by a meridional flow, rather than by diffusion. It is noted that the mean latitude of the polemost filaments tracks the boundary of the polar field cap, and undergoes an equatorward dip during each arrival of additional polar field, and that the polar filament bands track the boundary latitudes of the unipolar regions, drifting poleward with the regions at about 10 m/sec.

Topka, K.↗

Proposed Technique of Crystal-Ribbon Growth

Technique for silicon crystal-ribbon growth from crucible, two inert wettable filaments dipped into silicon melt to guide growth of silicon sheet. Filaments clamped in place and tilted slightly away from each other and seed ribbon lowered into contact with melt to establish menisci between filaments.

Thornhill, J. W.↗

Possible contributions of supernova remnants to the soft X-ray diffuse background (0.1 - 1keV)

Almost all of the B band (0.10-0.19 keV) and C band (0.15-0.28 keV) X-rays probably originate in a hot region surrounding the Sun, which Cox and Anderson modeled as a supernova remnant. This same region may account for a significant fraction of the M band (0.5-1 keV) X-rays if the nonequilibrium models of Cox and Anderson are applicable. A population of distant SNR similar to the local region, with center-to-center spacing of about 300 pc, could provide enough galactic M band emission to fill in the dip in the count rate in the galactic plane that would otherwise be present due to absorption of both the extra galactic power law flux and any large-scale-height stellar (or galactic halo) emission.

Sanders, W. T.↗

Investigation of reliability attributes and accelerated stress factors on terrestrial solar cells

The accelerated stress test results obtained on all terrestrial solar cells since the inception of the program are summarized. Tested cells were grouped according to the method used to form the conductive metallization layer: solder dipped, vacuum deposited, screen printed, and copper plated. Although metallization systems within each group were quite similar, they differed in numerous details according to the procedures employed by each manufacturer. Test results were summarized for all cells according to both electrical degradation and catastrophic mechanical changes. These results indicated a variability within each metallization category which was dependent on the manufacturer. Only one manufacturer was represented in the copper plated category and, although these showed no signs of detrimental copper diffusion during high temperature testing, their metallization was removed easily during high humidity pressure cooker testing. Preliminary testing of encapsulated cells showed no major differences between encapsulated and unencapsulated cells when subjected to accelerated testing.

Lathrop, J. W.↗

A 2 component X-ray spectrum from SMC X-1

Both HEAO-1 A2 and Einstein SSS observations of SMC X-1 are presented. An unpulsed soft component is found with a blackbody temperature of 0.16 keV and an area for the emission region of 10 to the 15th power sq cm to 10 to the 17th power sq cm. The hard X-ray component is pulsed; the phase averaged spectrum is a power law with alpha approximately 0.5 keV up to 17 keV above which it steepens. The SSS sets an upper limit of 4 x 10 to the 21st power H cm/2 to any absorption and is consistent with that expected from the wind of SK160. Absorption dips with a timescale of several hundred seconds are seen immediately following an eclipse exit and are probably caused by inhomogeneities in the wind of SK160.

Marshall, F. E.↗

A study of the United States coal resources

Geologically significant coal resources were identified. Statistically controlled tonnage estimates for each resource type were prepared. Particular emphasis was placed on the identification and description of coals in terms of seam thickness, inclination, depth of cover, discontinuities caused by faulting and igneous intrusion, and occurrence as isolated or multiseam deposits. The national resource was organized into six major coal provinces: the Appalachian Plateau, the Interior Basins, the Gulf Coastal Plain, the Rocky Mountain Basins, the High Plains, and North Alaska. Each basin within a province was blocked into subareas of homogeneous coal thickness. Total coal tonnage for a subarea was estimated from an analysis of the cumulative coal thickness derived from borehole or surface section records and subsequently categorized in terms of seam thickness, dip, overburden, multiseam proportions, coal quality, and tonnage impacted by severe faulting and igneous intrusions. Confidence intervals were calculated for both subarea and basin tonnage estimates.

Ferm, J. C.↗

Equatorial ionospheric currents derived from MAGSAT data

The MAGSAT data on the three component's of the geomagnetic field are subjected to ring current correction and crustal anomaly elimination near the dip equator. The evidence of a strong west east electrojet current below the satellite height (approximately 350 km) is confirmed. Strong evidence of east-west component of the field suggests the existence of a vertical current originating at the jet level and extending upwards. A model calculation shows that such a current system can explain the satellite data as well as the ground data.

Roy, M.↗

RS-232 communications analyzer module for HP-1602A logic analyzer

The design and construction of a simple ASCII analyzer is described. It was built to interface directly to a Hewlett-Packard 1602A logic state analyzer but the circuitry could easily be configured to operate with any logic analyzer. The design of the ASCII analyzer allows the use of all the trace and delay functions for the HF-1602A. The ASCII analyzer circuit utilizes two universal Asynchronous Receiver/Transmitters (UAR/Ts) to simultaneously examine both the transmit and receive serial data lines. Baud rates from 300 to 9600 bits per second are selectable with the externally mounted DIP switch. The unit requires no external power supply connection and all of the integrated circuits are CMOS for low power consumption.

Yost, S. R.↗

Thin wire pointing method

A method is described for forming sharp tips on thin wires, in particular phosphor bronze wires of diameters such as one-thousandth inch used to contact micron size Schottky barrier diodes, which enables close control of tip shape and which avoids the use of highly toxic solutions. The method includes dipping an end of a phosphor bronze wire into a dilute solution of sulfamic acid and applying a current through the wire to electrochemically etch it. The humidity in the room is controlled to a level of less than 50%, and the voltage applied between the wire and another electrode in the solutions is a half wave rectified voltage. The current through the wire is monitored, and the process is stopped when the current falls to a predetermined low level.

Green, G.↗

Constraints on the expansion of Ganymede and the thickness of the lithosphere

Since grooved terrain has formed from extensional faulting of at least one half of the surface of Ganymede, grooves may be due to planetary expansion which can be constrained by determining the extension associated with groove formation. The geometry and kinematics of a fault or group of faults must be known in order to determine the extension. Although neither of these is known for grooves on Ganymede, geologically reasonable end members of the dip, displacement and extension of faults which bound the graben can be estimated in order to place valuable constraints on possible surface area and radius increases as well as on the thickness of the Ganymede lithosphere. Minimum lithosphere thickness is estimated to be 5 km in the Marius and 9 km in the Galileo regions, at the time of furrow formation, and 4 km at the time of groove formation.

Golombek, M. P.↗

Active-region evolution and solar rotation variations in solar UV irradiance, total solar irradiance, and soft X rays

Variations in the total solar irradiance, solar UV spectral irradiance, and solar soft X-ray emission caused by active region evolution and solar rotation are analyzed by using concurrent measurements from the NIMBUS 7 and GOES satellites. The observations are interpreted by using simple empirical models that relate ground-based observations of the size and location of sunspots and plages to the full-disk temporal variations. It is found that the major dips in the photospheric total solar irradiance S, which are evident in both satellite measurements and model predictions, are usually not accompanied by outstanding enhancements in the chromospheric and upper photospheric UV spectral irradiance or coronal X rays. The main cause of this difference between the variability of S and of the UV flux is that the total chromospheric plage enhancements are not outstanding at those times when the total sunspot are outstanding. X rays are even more variable because of a much wider CMD sensitivity.

Donnelly, R. F.↗

H0323 + 022 - A puzzling high-latitude X-ray/optical/radio source

HEAO 1 has located a flaring X-ray source, H0323 + 022, at high galactic latitude. This source is identified with a V = 16.5 UV-excess object. While the counterpart has been observed on two occasions to have zero redshift absorption lines, these features have been absent on at least five other occasions. The high IR flux of the object indicates a multicomponent source. Einstein Observatory observations indicate that the X-ray source has two components, a steady soft component and a variable hard one which exhibits a pronounced 60-sec dip, as well as flaring activity, on time scales as small as six hours. A 5 GHz detection of the source, with a flux density of 41 + or - 1 mJy, has also been made by Feigelson et al (1982).

Doxsey, R.↗

A two-component X-ray spectrum from SMC X-1

HEAO 1 A-2 and Einstein Solid State Spectrometer (SSS) observations of SMC X-1 are presented. An unpulsed soft component is found with a blackbody temperature of 0.16 keV and an area for the emission region of 10 to the 15th to 10 to the 17th sq cm. The hard X-ray component is pulsed; the phase-averaged spectrum is a power law with alpha of about 0.5 up to 17 keV, above which it steepens. The SSS sets an upper limit of less than 4 x 10 to the 21st H/sq cm to any absorption, and is consistent with that expected from the wind of Sk 160. Absorption dips with a timescale of several hundred seconds are seen immediately following an eclipse exit, and are probably caused by inhomogeneities in the wind of Sk 160.

Marshall, F. E.↗