Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

An open science resource for establishing reliability and reproducibility in functional connectomics

Efforts to identify meaningful functional imaging-based biomarkers are limited by the ability to reliably characterize inter-individual differences in human brain function. Although a growing number of connectomics-based measures are reported to have moderate to high test-retest reliability, the variability in data acquisition, experimental designs, and analytic methods precludes the ability to generalize results. The Consortium for Reliability and Reproducibility (CoRR) is working to address this challenge and establish test-retest reliability as a minimum standard for methods development in functional connectomics. Specifically, CoRR has aggregated 1,629 typical individuals’ resting state fMRI (rfMRI) data (5,093 rfMRI scans) from 18 international sites, and is openly sharing them via the International Data-sharing Neuroimaging Initiative (INDI). To allow researchers to generate various estimates of reliability and reproducibility, a variety of data acquisition procedures and experimental designs are included. Similarly, to enable users to assess the impact of commonly encountered artifacts (for example, motion) on characterizations of inter-individual variation, datasets of varying quality are included.

60 APPLIED LIFE SCIENCES↗

Autonomous plug and play electric vehicle charging scenarios including reactive power provision: a probabilistic load flow analysis

Electric vehicle (EV) charging can have various impacts on low‐voltage distribution systems, along with increasing the uncertainty of network load levels. One method for capturing the statistical uncertainty is probabilistic load flow (PLF). A primary concern of such an approach is determining the correlation between the input variables. Since data are limited, a 1 min resolution bottom‐up time‐variant load model, capturing the changing voltage dependencies of the load, is used for modelling household electrical demand to provide pseudo‐meter data for the three‐phase PLF analysis of a residential distribution network. The correlation between the household and EV charging loads are implicitly taken into account by modelling the EV plug‐in and departure times with the corresponding occupancy model. Two autonomous plug‐and‐play charging scenarios are compared with a standard charging arrangement at both unity and 0.95 capacitive power factors. Four different PLF input correlation scenarios, varying from fully correlated to fully independent, are considered. The proposed charging scenarios and reactive power provision reduce the likelihood of system voltage violations introduced by EVs. The PLF results are verified against those from the initial time‐series analysis providing valuable insight into the uncertainty introduced by EVs and the correlation between household and EV loads.

Melhorn, Alexander C.↗

The extended Baryon Oscillation Spectroscopic Survey: Variability selection and quasar luminosity function

The extended Baryon Oscillation Spectroscopic Survey of the Sloan Digital Sky Survey (SDSS-IV/eBOSS) has an extensive quasar program that combines several selection methods. Among these, the photometric variability technique provides highly uniform samples, which are unaffected by the redshift bias of traditional optical-color selections, when z = 2.7-3.5 quasars cross the stellar locus or when host galaxy light affects quasar colors at z< 0.9. We present the variability selection of quasars in eBOSS, focusing on a specific program that led to a sample of 13 876 quasars to g dered = 22.5 over a 94.5 deg 2 region in Stripe 82, which has an areal density 1.5 times higher than over the rest of the eBOSS footprint. We use these variability-selected data to provide a new measurement of the quasar luminosity function (QLF) in the redshift range of 0.68 g (z = 2) = -21.80 at low redshift and to M g (z = 2) = -26.20 at z ~ 4. We fit the QLF using two independent double-power-law models with ten free parameters each. The first model is a pure luminosity-function evolution (PLE) with bright-end and faint-end slopes allowed to be different on either side of z = 2.2. The other is a simple PLE at z< 2.2, combined with a model that comprises both luminosity and density evolution (LEDE) at z> 2.2. Both models are constrained to be continuous at z = 2.2. They present a flattening of the bright-end slope at high redshift. The LEDE model indicates a reduction of the break density with increasing redshift, but the evolution of the break magnitude depends on the parameterization. The models are in excellent accord, predicting quasar counts that agree within 0.3% (resp., 1.1%) to g< 22.5 (resp., g< 23). The models are also in good agreement over the entire redshift range with models from previous studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Time Series, Stochastic Processes and Completeness of Quantum Theory

Most of physical experiments are usually described as repeated measurements of some random variables. Experimental data registered by on-line computers form time series of outcomes. The frequencies of different outcomes are compared with the probabilities provided by the algorithms of quantum theory (QT). In spite of statistical predictions of QT a claim was made that it provided the most complete description of the data and of the underlying physical phenomena. This claim could be easily rejected if some fine structures, averaged out in the standard descriptive statistical analysis, were found in time series of experimental data. To search for these structures one has to use more subtle statistical tools which were developed to study time series produced by various stochastic processes. In this talk we review some of these tools. As an example we show how the standard descriptive statistical analysis of the data is unable to reveal a fine structure in a simulated sample of AR (2) stochastic process. We emphasize once again that the violation of Bell inequalities gives no information on the completeness or the non locality of QT. The appropriate way to test the completeness of quantum theory is to search for fine structures in time series of the experimental data by means of the purity tests or by studying the autocorrelation and partial autocorrelation functions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling Arcs

Although vacuum arcs were first identified over 110 years ago, they are not yet well understood. We have since developed a model of breakdown and gradient limits that tries to explain, in a self-consistent way: arc triggering, plasma initiation, plasma evolution, surface damage and gradient limits. We use simple PIC codes for modeling plasmas, molecular dynamics for modeling surface breakdown, and surface damage, and mesoscale surface thermodynamics and finite element electrostatic codes for to evaluate surface properties. Since any given experiment seems to have more variables than data points, we have tried to consider a wide variety of arcing (rf structures, e beam welding, laser ablation, etc.) to help constrain the problem, and concentrate on common mechanisms. While the mechanisms can be comparatively simple, modeling can be challenging.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum Chemistry Common Driver and Databases (QCDB) and Quantum Chemistry Engine (QCEngine): Automation and interoperability among computational chemistry programs

We report that community efforts in the computational molecular sciences (CMS) are evolving toward modular, open, and interoperable interfaces that work with existing community codes to provide more functionality and composability than could be achieved with a single program. The Quantum Chemistry Common Driver and Databases (QCDB) project provides such capability through an application programming interface (API) that facilitates interoperability across multiple quantum chemistry software packages. In tandem with the Molecular Sciences Software Institute and their Quantum Chemistry Archive ecosystem, the unique functionalities of several CMS programs are integrated, including CFOUR, GAMESS, NWChem, OpenMM, Psi4, Qcore, TeraChem, and Turbomole, to provide common computational functions, i.e., energy, gradient, and Hessian computations as well as molecular properties such as atomic charges and vibrational frequency analysis. Both standard users and power users benefit from adopting these APIs as they lower the language barrier of input styles and enable a standard layout of variables and data. These designs allow end-to-end interoperable programming of complex computations and provide best practices options by default.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An investigation of Newton-Sketch and subsampled Newton methods

Sketching, a dimensionality reduction technique, has received much attention in the statistics community. In this paper, we study sketching in the context of Newton's method for solving finite-sum optimization problems in which the number of variables and data points are both large. In this work, we study two forms of sketching that perform dimensionality reduction in data space: Hessian subsampling and randomized Hadamard transformations. Each has its own advantages, and their relative tradeoffs have not been investigated in the optimization literature. Additionally, our study focuses on practical versions of the two methods in which the resulting linear systems of equations are solved approximately, at every iteration, using an iterative solver. The advantages of using the conjugate gradient method vs. a stochastic gradient iteration are revealed through a set of numerical experiments, and a complexity analysis of the Hessian subsampling method is presented.

97 MATHEMATICS AND COMPUTING↗

THREE-DIMENSIONAL MAPS OF THE MAGELLANIC CLOUDS USING RR LYRAE STARS AND CEPHEIDS. II. THE SMALL MAGELLANIC CLOUD

We use data on variable stars from the Optical Gravitational Lensing Experiment survey to determine the three-dimensional structure of the Small Magellanic Cloud (SMC). Deriving individual distances to RR Lyrae stars and Cepheids, we investigate the distribution of these tracers of the old and young populations in the SMC. Photometrically estimated metallicities are used to determine the distances to 1494 RR Lyrae stars, which have typical ages greater than 9 Gyr. For 2522 Cepheids, with ages of a few tens to a few hundred Myr, distances are calculated using their period-luminosity relation. Individual reddening estimates from the intrinsic color of each star are used to obtain high precision three-dimensional maps. The distances of RR Lyrae stars and Cepheids are in very good agreement with each other. The median distance of the RR Lyrae stars is found to be 61.5 {+-} 3.4 kpc. For the Cepheids, a median distance of 63.1 {+-} 3.0 kpc is obtained. Both populations show an extended scale height, with 2.0 {+-} 0.4 kpc for the RR Lyrae stars and 2.7 {+-} 0.3 kpc for the Cepheids. This confirms the large depth of the SMC suggested by a number of earlier studies. The young population is very differently oriented than the old stars. While we find an inclination angle of 7 Degree-Sign {+-} 15 Degree-Sign and a position angle of 83 Degree-Sign {+-} 21 Degree-Sign for the RR Lyrae stars, for the Cepheids an inclination of 74 Degree-Sign {+-} 9 Degree-Sign and a position angle of 66 Degree-Sign {+-} 15 Degree-Sign is obtained. The RR Lyrae stars show a fairly homogeneous distribution, while the Cepheids roughly follow the distribution of the bar, with their northeastern part being closer to us than the southwestern part of the bar. Interactions between the SMC, Large Magellanic Cloud, and Milky Way are presumably responsible for the tilted, elongated structure of the young population of the SMC.

79 ASTRONOMY AND ASTROPHYSICS↗

NuSTAR AND SWIFT OBSERVATIONS OF THE BLACK HOLE CANDIDATE XTE J1908+094 DURING ITS 2013 OUTBURST

The black hole (BH) candidate XTE J1908+094 went into outburst for the first time since 2003 in 2013 October. We report on an observation with the Nuclear Spectroscopic Telescope Array (NuSTAR) and monitoring observations with Swift during the outburst. NuSTAR caught the source in the soft state: the spectra show a broad relativistic iron line, and the light curves reveal a ∼40 ks flare, with the count rate peaking about 40% above the non-flare level and with significant spectral variation. A model combining a multi-temperature thermal component, a power law, and a reflection component with an iron line provides a good description of the NuSTAR spectrum. Although relativistic broadening of the iron line is observed, it is not possible to constrain the BH spin with these data. The variability of the power-law component, which can also be modeled as a Comptonization component, is responsible for the flux and spectral change during the flare, suggesting that changes in the corona (or possibly continued jet activity) are the likely cause of the flare.

79 ASTRONOMY AND ASTROPHYSICS↗

Resolving astrophysical uncertainties in dark matter direct detection

We study the impact of the assumed velocity distribution of galactic dark matter particles on the interpretation of results from nuclear recoil detectors. By converting experimental data to variables that make the astrophysical unknowns explicit, different experiments can be compared without implicit assumptions concerning the dark matter halo. We extend this framework to include the annual modulation signal, as well as multiple target elements. Recent results from DAMA, CoGeNT and CRESST-II can be brought into agreement if the velocity distribution is very anisotropic and thus allows a large modulation fraction. However constraints from CDMS and XENON cannot be evaded by appealing to such astrophysical uncertainties alone.

79 ASTRONOMY AND ASTROPHYSICS↗

Double-differential inclusive charged-current ν μ cross sections on hydrocarbon in MINERvA at ( E ν ) ~ 3.5 GeV

MINERvA reports inclusive charged-current cross sections for muon neutrinos on hydrocarbon in the NuMI beamline. We measured the double-differential cross section in terms of the longitudinal and transverse muon momenta, as well as the single-differential cross sections in those variables. The data used in this analysis correspond to an exposure of 3.34×10 20 protons on target with a peak neutrino energy of approximately 3.5 GeV. Measurements are compared to the GENIE, NuWro and GiBUU neutrino cross-section predictions, as well as a version of GENIE modified to produce better agreement with prior exclusive MINERvA measurements. None of the models or variants were able to successfully reproduce the data across the entire phase space, which includes areas dominated by each interaction channel.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Data‐driven identification of environmental variables influencing phenotypic plasticity to facilitate breeding for future climates

Summary Phenotypic plasticity describes a genotype's ability to produce different phenotypes in response to different environments. Breeding crops that exhibit appropriate levels of plasticity for future climates will be crucial to meeting global demand, but knowledge of the critical environmental factors is limited to a handful of well‐studied major crops. Using 727 maize ( Zea mays L.) hybrids phenotyped for grain yield in 45 environments, we investigated the ability of a genetic algorithm and two other methods to identify environmental determinants of grain yield from a large set of candidate environmental variables constructed using minimal assumptions. The genetic algorithm identified pre‐ and postanthesis maximum temperature, mid‐season solar radiation, and whole season net evapotranspiration as the four most important variables from a candidate set of 9150. Importantly, these four variables are supported by previous literature. After calculating reaction norms for each environmental variable, candidate genes were identified and gene annotations investigated to demonstrate how this method can generate insights into phenotypic plasticity. The genetic algorithm successfully identified known environmental determinants of hybrid maize grain yield. This demonstrates that the methodology could be applied to other less well‐studied phenotypes and crops to improve understanding of phenotypic plasticity and facilitate breeding crops for future climates.

Kusmec, Aaron↗

Human influence on the seasonal cycle of tropospheric temperature

We provide scientific evidence that a human-caused signal in the seasonal cycle of tropospheric temperature has emerged from the background noise of natural variability. Satellite data and the anthropogenic “fingerprint” predicted by climate models show common large-scale changes in geographical patterns of seasonal cycle amplitude. These common features include increases in amplitude at mid-latitudes in both hemispheres, amplitude decreases at high latitudes in the Southern Hemisphere, and small changes in the tropics. Simple physical mechanisms explain these features. The model fingerprint of seasonal cycle changes is identifiable with high statistical confidence in five out of six satellite temperature datasets. Our results suggest that attribution studies with the changing seasonal cycle provide powerful evidence for a significant human effect on Earth’s climate.

Santer, Benjamin D.↗

The First 30 Years of GEWEX

The Global Energy and Water Cycle Exchanges (GEWEX) project was created more than 30 years ago within the framework of the World Climate Research Programme (WCRP). The aim of this initiative was to address major gaps in our understanding of Earth’s energy and water cycles given a lack of information about the basic fluxes and associated reservoirs of these cycles. GEWEX sought to acquire and set standards for climatological data on variables essential for quantifying water and energy fluxes and for closing budgets at the regional and global scales. In so doing, GEWEX activities led to a greatly improved understanding of processes and our ability to predict them. Such understanding was viewed then, as it remains today, essential for advancing weather and climate prediction from global to regional scales. GEWEX has also demonstrated over time the importance of a wider engagement of different communities and the necessity of international collaboration for making progress on understanding and on the monitoring of the changes in the energy and water cycles under ever increasing human pressures. Here, this paper reflects on the first 30 years of evolution and progress that has occurred within GEWEX. This evolution is presented in terms of three main phases of activity. Progress toward the main goals of GEWEX is highlighted by calling out a few achievements from each phase. A vision of the path forward for the coming decade, including the goals of GEWEX for the future, are also described.

54 ENVIRONMENTAL SCIENCES↗

The NASA ACTIVATE Mission

The NASA Aerosol Cloud Meteorology Interactions over the Western Atlantic Experiment (ACTIVATE) conducted 162 joint flights with two aircraft over the northwest Atlantic to study aerosol–cloud interactions (ACIs), which represent the largest uncertainty in estimating total anthropogenic radiative forcing. The combination of a high-flying King Air and low-flying HU-25 Falcon, equipped with remote sensing and in situ instruments, characterized trace gases, aerosol particles, clouds, and meteorological variables with data collected nearly simultaneously below, within, and above marine boundary layer (MBL) clouds. Flights spanning warm and cold seasons across 3 years (2020–22) provided a broad range of conditions associated with aerosol particles, cloud properties (including particle size and phase), and meteorology, ideally suited for robust ACI calculations and assessing how well models simulate a wide range of MBL clouds from stratiform to cumulus. ACTIVATE data suggest that drivers of cloud droplet number concentration N d , including aerosol particles and MBL dynamics, vary between winter and summer months with a stronger potential to convert aerosol particles into cloud droplets in winter. Models of varying complexity not only highlight some skills in simulating winter and summer cloud types but also identify challenges that still need to be addressed such as treatment of turbulence, wet scavenging, and mesoscale organization. Remote sensing advances range from new retrieval methods for N d , cloud phase classification, vertically resolved aerosol and cloud condensation nuclei number concentration, and ocean surface wind speed. This work describes these scientific and technological advances along with efforts in outreach and open data science.

aerosol indirect effect↗

Dataset for "Evaluating Deep Learning Approaches for Predictions in Unmonitored Basins with Continental-scale Stream Temperature Models" Willard et al. (2024)

This data release provides all data and code used in the paper " "Evaluating Deep Learning Approaches for Predictions in Unmonitored Basins with Continental-scale Stream Temperature Models" Willard et al. (2024)" to model stream temperature, evaluate, and assess results. The associated manuscript explores current open questions in prediction in ungauged and unmonitored basins concerning top-down versus bottom-up approaches, tradeoffs between data available and input requirements, and the appropriate representation of catchment attributes as inputs to deep learning models. Modeling was done primarily with long short-term memory (LSTM) models, and stream site coverage spans 1362 locations across the conterminous United States. The data is organized into these items items:Code repository and data for the paper " "Evaluating Deep Learning Approaches for Predictions in Unmonitored Basins with Continental-scale Stream Temperature Models" Willard et al. (2024)".Code: stream_temp_ml_regionalization.zip contains the code repositoryData to run the code: - data_dir.zip -- contains all files that should be moved to the "DATA_DIR" variable defined in the "set_env_vars.sh" script in the code repository- metadata_dir.zip -- contains all files that should be moved to the "METADATA_DIR" variable defined in the "set_env_vars.sh" script in the code repository- error_analysis_attribute_and_groundwater_dir.zip - workflows for the extended error analysis by stream attribute and groundwater influenceData produced by the code and used in the paper:- outputs_dir.zip - contains model output and results (outputs_dir/results), model weights (outputs_dir/models), and all other outputs used for the paper including feature importances.To cite this code, please use the following BibTeX or MLA entries:bibtex:@misc{willard2024streamdata, author = {Jared Willard and Fabio Ciulla and Helen Weierbach and Vipin Kumar and Charuleka Varadharajan}, title = {Dataset for "Evaluating Deep Learning Approaches for Predictions in Unmonitored Basins with Continental-scale Stream Temperature Models"}, year = {2024}, doi = {10.15485/2448016}, publisher = {ESS-DIVE Repository}, url = {https://doi.org/10.15485/2448016}}MLA: Willard, Jared, et al. Dataset for "Evaluating Deep Learning Approaches for Predictions in Unmonitored Basins with Continental-scale Stream Temperature Models". 2024. ESS-DIVE Repository, doi:10.15485/2448016.

54 ENVIRONMENTAL SCIENCES↗

Dataset for "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantification" Willard et al. (2025).

This data release provides all data and code used in the paper " "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantifications" Willard et al. (2025)" to model stream temperature, evaluate, and assess results. The associated manuscript explores the effect of different ensemble construction techniques across different common machine learning (ML) architectures for predictions in unmonitored basins. Modeling was done using long short-term memory (LSTM), gated recurrent unit (GRU), temporal convolution network (TCN), and extreme gradient boosting (XGBoost) models, and stream site coverage spans 1362 locations across the conterminous United States. The ensemble construction techniques investigated include ensemble by random weight initialization, differing hyperparameters, different random subsets of training data, different subselections of input features, different architectures, and Monte Carlo Dropout. The data is organized into these items items:Code repository and data for the paper " "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantifications" Willard et al. (2025).Code: stream_temp_ml_regionalization.zip contains the code repositoryData to run the code:- data_dir.zip -- contains all files that should be moved to the "DATA_DIR" variable defined in the "set_env_vars.sh" script in the code repository- metadata_dir.zip -- contains all files that should be moved to the "METADATA_DIR" variable defined in the "set_env_vars.sh" script in the code repositoryData produced by the code and used in the paper:- outputs_dir.zip - contains model output and results (outputs_dir/results), model weights (outputs_dir/models), and all other outputs used for the paper including feature importances.To cite this code, please use the following BibTeX or MLA entries:bibtex:@misc{willard2025streamensembles,author = {Jared Willard and Charuleka Varadharajan},title = {Dataset for "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantification"},year = {2024},doi = {10.15485/2527393},publisher = {ESS-DIVE Repository},url = {https://data.ess-dive.lbl.gov/datasets/doi:10.15485/2527393}}MLA: Willard, Jared, et al. Dataset for "Machine Learning Ensembles Can Enhance Hydrologic Predictions and Uncertainty Quantification". 2025. ESS-DIVE Repository, doi:10.15485/2448016.

54 ENVIRONMENTAL SCIENCES↗

Canopy tree mortality and crown exposure data from the Amacayacu Forest Dynamics Plot, Northwestern Amazon

Data on the mortality of 984 canopy trees, their crown exposure to light (relative to total crown area), growth deviations (relative to conspecifics), tree size, and species’ wood density collected between 2013 and 2019 in 18 ha of the Amacayacu Forest Dynamics Plot, Northwestern Amazon. This dataset contains a single CSV data file. Variable definitions: 1. Species: [character] species identification 2. Family: [character] family of the species 3. tag: [character] unique consecutive for the tree 4. status: [character] status of the tree in the third census (ALIVE or DEAD) 5. wsg: [numeric]: species’ wood density (g cm-3) 6. growth_r1: [numeric]: annual growth rate of the tree between the first and second census (cm y-1) 7. growth_r2: [numeric]: annual growth rate of the tree between the second and third census (cm y-1) 8. gt1: [numeric] modulus transformed growth rate with a lambda of 0.4 for the annual growth rate of the tree between the first and second census (cm y-1) 9. gt2: [numeric]: modulus transformed growth rate with a lambda of 0.4 for the annual growth rate of the tree between the second and third census (cm y-1) 10. rgr1: [numeric] relative growth rate between the first and second census (cm y-1) 11. rgr2: [numeric] relative growth rate between the second and third census (cm y-1) 12. sa_gt: [numeric] species-adjusted modulus transformed growth rate 13. sa_rgr: [numeric] species-adjusted relative growth rate 14. gr_n: [numeric] number of individuals of the species used to calculate the mean and species modulus transformed growth rate 15. dbh_flight: [numeric] diameter at breast height (1.3 m) estimated at the time of the drone flight (cm) 16. eca: [numeric] exposed crown area calculated as the area of the crown polygon delineated in the orthomosaic (m2) 17. total_ca: [numeric] total crown area estimated from a crown area model (m2) 18. rcel: [numeric] relative crown exposure to light (m2) 19. time_flight_census3: [numeric] time in years from the drone flight date to the third census for that tree (yr)

54 ENVIRONMENTAL SCIENCES↗