Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dimensionless Numbers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Sub-Alfvenic velocity limits in magnetohydrodynamic rotating plasmas

Magnetized plasmas in shaped fields rely on large, supersonic rotation to effect centrifugal confinement of plasma along magnetic field lines. The results of experiments on the Maryland Centrifugal Experiment (MCX) [R. F. Ellis et al., Phys. Plasmas 12, 055704 (2005)] to document velocity limits are reported. Previous results have shown a limit at the Alfven speed, consistent with equilibrium limits from ideal magnetohydrodynamic theory. Another speed limit, previously reported as possibly related to a critical ionization phenomenon and depending only on the ion species and the shape of the confining magnetic field, is investigated here for a broad range of the applied parameters. We show that this speed limit manifests at sub-Alfvenic levels and that, as externally applied torques on the plasma are increased, the extra momentum input shows up as enhanced plasma density or lower momentum confinement time, accompanied by an increase in the neutral radiation level. Several key parameters are scanned, including the mirror ratio, the length between insulators, and the species mass. We show that this velocity limit is consistent with the species-dependent critical ionization velocity postulated by Alfven.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anelastic anomalies and negative Poisson's ratio in tetragonal BaTiO{sub 3} ceramics

Anelastic anomalies (sharp variations in modulus and damping with temperature) were observed in tetragonal BaTiO{sub 3} via broadband viscoelastic spectroscopy after aging at 50 deg. C for 15 h. The effect was most pronounced under electrical short circuit condition, at low frequency and under small excitation strain (10{sup -6}). Softening in bulk modulus and negative Poisson's ratio were observed near 60 deg. C. Effects are attributed to an oxygen vacancy mechanism. A relaxational model cannot account for sharp response at smaller strains. Heterogeneity of negative stiffness is considered as a cause.

36 MATERIALS SCIENCE↗

Diminished cage effect in solid p-H{sub 2}: Infrared spectra of ClSCS, ClCS, and ClSC in an irradiated p-H{sub 2} matrix containing Cl{sub 2} and CS{sub 2}

Irradiation of a p-H{sub 2} matrix containing Cl{sub 2} and CS{sub 2} at 3.3 K with laser emission at 340 nm followed by annealing of the matrix produced main features at 1479.5 and 1480.8 cm{sup -1}. These lines are attributed to {nu}{sub 1} (SCS antisymmetric stretching) mode of ClSCS. Irradiation of the matrix at 355 nm decomposes ClSCS. Products CS (1272.2 and 1271.1 cm{sup -1}), ClCS (1193.9/1191.9 and 637.5 cm{sup -1}), and ClSC (1137.0 cm{sup -1}) were observed upon annealing. The assignments were based on comparison of observed vibrational wavenumbers and {sup 13}C- and {sup 34}S-isotopic ratios with those predicted with density-functional theories (B3LYP and BPW91/aug-cc-pVTZ). These results demonstrate that the cage effect of solid p-H{sub 2} is diminished so that isolated Cl was produced via photodissociation of Cl{sub 2} in situ and subsequently reacted with CS{sub 2} to form ClSCS, but not ClC(=S)SCl, upon annealing; typically ClC(=S)SCl was produced as the major product on irradiation of noble-gas matrices containing Cl{sub 2} and CS{sub 2}. Observation of ClSCS but not ClCS{sub 2} is consistent with the theoretical prediction that only formation of the former proceeds via a barrierless path. Similarly, upon irradiation of ClSCS at 355 nm, Cl, CS, and CS{sub 2} were produced; subsequent annealing of the irradiated matrix produced ClSC and ClCS via barrierless paths.

36 MATERIALS SCIENCE↗

Characterization of Si volume- and delta-doped InGaAs grown by molecular beam epitaxy

Bulk InGaAs layers were grown at 400 deg. C lattice-matched to InP semi-insulating substrates by molecular beam epitaxy. Si doping of the layers was performed by applying volume- and delta-doping techniques. The samples were characterized by capacitance-voltage, van der Pauw-Hall, secondary ion mass spectroscopy and photoluminescence measurements. Good agreement in terms of dependence of mobility and Burstein-Moss shift shift on doping concentration in samples doped by the two different techniques was obtained. Amphoteric behavior of Si was observed at doping concentrations higher than {approx}2.9x10{sup 19} cm{sup -3} in both delta- and volume-doped samples. Degradation of InGaAs crystalline quality occurred in samples with Si concentrations higher than {approx}4x10{sup 19} cm{sup -3}.

36 MATERIALS SCIENCE↗

The Investigation of Decomposition of Supersaturated Si<Zn> Solid Solution by X-Ray Diffuse Scattering

The results of investigation of microstructure of Zn doped n-type Si by X-ray Diffuse Scattering (XRDS) are presented. Experimental samples were made by a high-temperature Zn diffusion annealing with subsequent quenching and tempering. Reciprocal space maps of XRDS were obtained. They resulted in that crystal lattice of the samples contains spherical MDs of vacancy type and plane shape MDs of interstitial type. The MDs average radius and their type depend on Zn doping level and thermal treatment after Zn diffusion.

36 MATERIALS SCIENCE↗

Neutrino induced coherent pion production

We discuss different parameterizations of the C{sub 5}{sup A}(q{sup 2}) NDELTA form factor, fitted to the old Argonne bubble chamber data for pion production by neutrinos, and we use coherent pion production to test their low q{sup 2} behavior. We find moderate effects that will be difficult to observe with the accuracy of present experiments. We also discuss the use of the Rein-Sehgal model for low energy coherent pion production. By comparison to a microscopic calculation, we show the weaknesses some of the approximations in that model that lead to very large cross sections as well as to the wrong shapes for differential ones. Finally we show that models based on the partial conservation of the axial current hypothesis are not fully reliable for differential cross sections that depend on the angle formed by the pion and the incident neutrino.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The MuCap Experiment

Muon capture on the proton is sensitive to the weak pseudoscalar form factor, g{sub p}, one of the basic parameters characterizing the nucleon electroweak charged-current interaction. There is a precise theoretical prediction for g{sub p} based on chiral symmetry of QCD, yet the results of past experiments are controversial: they are dependent on a poorly-known, mu-molecular kinetic parameter, and there is no point of mutual agreement between theory and all experiments. The goal of the MuCap experiment is to clarify the situation by measuring the rate of muon capture on the free proton to 1%, which determines g{sub p} to 6%, higher precision than achieved in previous experiments and without ambiguities in the interpretation. This talk will cover the motivation for and design of the MuCap experiment, first physics results from the new measurement, and improvements toward the final precision goal.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First Measurement of Muon Neutrino Charged Current Quasielastic (CCQE) Double Differential Cross Section

Using a high statistics sample of muon neutrino charged current quasielastic (CCQE) events, we report the first measurement of the double differential cross section ((d{sup 2}sigma/dT{sub m}udcos theta{sub m}u)) for this process. The result features reduced model dependence and supplies the most complete information on neutrino CCQE scattering to date. Measurements of the absolute cross section as a function of neutrino energy (sigma[E{sup QE,RFG}{sub n}u]) and the single differential cross section ((dsigma/dQ{sup 2}{sub QE})) are also provided, largely to facilitate comparison with prior measurements. This data is of particular use for understanding the axial-vector form factor of the nucleon as well as improving the simulation of low energy neutrino interactions on nuclear targets, which is of particular relevance for experiments searching for neutrino oscillations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multiferroic properties in Ba{sub 0.93}Bi{sub 0.07}Ti{sub 1-x}Mn{sub x}O{sub 3} ceramics

Nominal composition of Ba{sub 0.93}Bi{sub 0.07}Ti{sub 1-x}Mn{sub x}O{sub 3} (x=0, 0.02, and 0.04) ceramics have been prepared by a modified Pechini method. X-ray diffraction analysis reveals that the samples are pure perovskite BaTiO{sub 3} (BTO) structure with no trace of impurity phase. The cell volume of the composites increases monotonously with the increase in Mn content, which indicates that Mn ions have been incorporated into the lattice of Ba{sub 0.93}Bi{sub 0.07}TiO{sub 3}. The samples are experimentally confirmed to show ferromagnetic (FM) and ferroelectric behaviors simultaneously at room temperature. The temperature dependent magnetic behaviors show complex magnetic interactions including FM, antiferromagnetic, and paramagnetic. These results suggest that the dopant Bi and Mn help BTO transit from pure ferroelectric to multiferroic materials and the magnetic behaviors can be explained by the bound magnetic polaron model with inhomogeneity of Mn dopant distribution.

36 MATERIALS SCIENCE↗

EFFECTS of DUAL DOPING OF C AND TiC NANOPARTICLES ON SUPERCONDUCTING PROPERTIES OF Fe-SHEATHED MgB{sub 2} TAPES

Fe-sheathed MgB{sub 2} wires doped with C and TiC nanoparticles in the formula MgB{sub 2-x}C{sub x}+yTiC(x = 0, 0.05, 0.1, 0.15, 0.2, and y = 0, 2.5 wt.%, 5 wt.%) were investigated. X-ray diffraction patterns indicate that the core materials in the wires contain small amount of Fe{sub 2}B and MgO impurity phases, and the peaks shift with the variation of doping amount. It is found that the critical temperature T{sub c} decreases with the increase of doping amount. Strong in-field current carrying capability enhancement was observed on MgB{sub 1.95}C{sub 0.05}+2.5 wt.% TiC.

36 MATERIALS SCIENCE↗

Phase transformation of Mg-Fe alloys

An Mg-Fe alloy system prepared through mechanical alloying (MA) was structurally analyzed. MA can produce single-phase bcc alloys using Mg concentrations up to about 15 mol %. Use of conventional average structure analysis and x-ray pair-distribution function method enabled the long-range and short-range order structures of the Mg-Fe alloys to be bridged. The substituted Mg atoms were randomly arranged in the low-Mg composition but started to have an order structure. The partially ordered Mg-Fe alloy undergoes an austenitic (cubic) to martensitic (orthorhombic) phase change, as increasing Mg composition.

36 MATERIALS SCIENCE↗

Sputtering-induced Co{sup 0} formation in x-ray photoelectron spectroscopy of nanocrystalline Zn{sub 1-x}Co{sub x}O spinodal enrichment models

Nanoscale enrichments resulting from spinodal decomposition have been proposed to contribute to the interesting magnetic properties of diluted magnetic oxides such as cobalt-doped ZnO (Zn{sub 1-x}Co{sub x}O), but little is known experimentally about the electronic structures or physical properties of such enrichments. Here, x-ray photoelectron spectroscopy (XPS) is used to examine wurtzite Zn{sub 1-x}Co{sub x}O crystallites over the full composition range (0.0{<=}x{<=}1.0) that serve as models of the proposed spinodal decomposition nanostructures within Zn{sub 1-x}Co{sub x}O bulk materials. With increasing x, the valence band edge shifts to smaller binding energies and the cobalt 2p peaks shift to greater binding energies, providing spectroscopic signatures that may allow identification of spinodal decomposition in bulk Zn{sub 1-x}Co{sub x}O. Reduction of Co{sup 2+} to Co{sup 0} by argon ion (Ar{sup +}) sputtering was also found to become markedly more facile with increasing x, suggesting that locally-enriched Zn{sub 1-x}Co{sub x}O is at greater risk of yielding false-positive Co{sup 0} XPS signals than uniformly dilute Zn{sub 1-x}Co{sub x}O with the same overall composition.

36 MATERIALS SCIENCE↗

Synthesis and properties of porous SiC ceramics

Porous silicon carbide (SiC) ceramics are produced using carbon matrices derived from natural wood. Such material is especially promising as it is environmentally friendly with attractive physical properties, including a high level of biocompatibility, chemical inertness, and mechanical strength. We have developed a forced impregnation process with further synthesis of SiC using natural wood as well as a variety of industrial carbon materials and compared the properties of these ceramics. The structure and composition of the materials obtained were investigated by Raman scattering spectroscopy. The hardness of the samples was estimated using the Vickers technique. It was shown that the phase composition and mechanical properties of synthesized SiC ceramics can be effectively controlled by the initial Si contents and temperature of the synthesis process. A large variety of options are demonstrated for materials development taking into account an optimal porosity selection for various practical applications.

36 MATERIALS SCIENCE↗

Characterization of diamond-like nanocomposite thin films grown by plasma enhanced chemical vapor deposition

Diamond-like nanocomposite (DLN) thin films, comprising the networks of a-C:H and a-Si:O were deposited on pyrex glass or silicon substrate using gas precursors (e.g., hexamethyldisilane, hexamethyldisiloxane, hexamethyldisilazane, or their different combinations) mixed with argon gas, by plasma enhanced chemical vapor deposition technique. Surface morphology of DLN films was analyzed by atomic force microscopy. High-resolution transmission electron microscopic result shows that the films contain nanoparticles within the amorphous structure. Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and x-ray photoelectron spectroscopy (XPS) were used to determine the structural change within the DLN films. The hardness and friction coefficient of the films were measured by nanoindentation and scratch test techniques, respectively. FTIR and XPS studies show the presence of C-C, C-H, Si-C, and Si-H bonds in the a-C:H and a-Si:O networks. Using Raman spectroscopy, we also found that the hardness of the DLN films varies with the intensity ratio I{sub D}/I{sub G}. Finally, we observed that the DLN films has a better performance compared to DLC, when it comes to properties like high hardness, high modulus of elasticity, low surface roughness and low friction coefficient. These characteristics are the critical components in microelectromechanical systems (MEMS) and emerging nanoelectromechanical systems (NEMS).

36 MATERIALS SCIENCE↗

To the theory of high-power gyrotrons with uptapered resonators

In high-power gyrotrons it is desirable to combine an optimal resonator length with the optimal value of the resonator quality factor. In resonators with the constant radius of the central part, the possibilities of this combination are limited because the quality factor of the resonator sharply increases with its length. Therefore the attempts to increase the length for maximizing the efficiency leads to such increase in the quality factor which makes the optimal current too small. Resonators with slightly uptapered profiles offer more flexibility in this regard. In such resonators, one can separate optimization of the interaction length from optimization of the quality factor because the quality factor determined by diffractive losses can be reduced by increasing the angle of uptapering. In the present paper, these issues are analyzed by studying as a typical high-power 17 GHz gyrotron which is currently under development in Europe for ITER (http://en.wikipedia.org/wiki/ITER). The effect of a slight uptapering of the resonator wall on the efficiency enhancement and the purity of the radiation spectrum in the process of the gyrotron start-up and power modulation are studied. Results show that optimal modification of the shape of a slightly uptapered resonator may result in increasing the gyrotron power from 1052 to 1360 kW.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanograss and nanostructure formation on silicon using a modified deep reactive ion etching

Silicon nanograss and nanostructures are realized using a modified deep reactive ion etching technique on both plane and vertical surfaces of a silicon substrate. The etching process is based on a sequential passivation and etching cycle, and it can be adjusted to achieve grassless high aspect ratio features as well as grass-full surfaces. The incorporation of nanostructures onto vertically placed parallel fingers of an interdigital capacitive accelerometer increases the total capacitance from 0.45 to 30 pF. Vertical structures with features below 100 nm have been realized.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

(e, e'p) reaction at true quasielastic kinematics in {sup 16}O, {sup 12}C and {sup 208}Pb at JLab

The reactions {sup 16}O(e,e'p) {sup 15}N, {sup 208}Pb(e,e'p) {sup 207}Tl and {sup 12}C(e,e'p) {sup 11}B were measured in experiments E00-102 and E06-007 performed at JLab (VA, USA) at true quasielastic kinematics (x{sub B} = 1) with constant energy (omega) and momentum (q) transferred over a wide p{sub miss} range. These experiments address several open issues in nuclear structure such as the role of relativity and of long-range correlations in the description of nuclei as well as a possible dependence of the spectroscopic factors on Q{sup 2}. Preliminary experimental results and theoretical predictions from a fully relativistic DWIA model carefully averaged over the experimental acceptances are shown.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗