SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This paper describes Genesis orbit determination activities during the final-approach and atmospheric-entry phases, covering from the end of the science phase through the SRC release, in more detail.
Investigation of Uranus and Neptune, via orbiter and atmospheric probes, is required to answer pressing science questions that have been raised in previous Decadal Surveys. As the Ice Giants are the farthest planets from Earth, traditional fully-propulsive orbit insertion missions have transit times to the planetary bodies nearing 13-15 years and require a large amount of propellant, leaving less mass for the scientific payload (dry mass percentages of around 30-40%). Aerocapture uses aerodynamic forces generated by flight within a planetary atmosphere to decelerate and achieve orbit insertion. Although, aerocapture has not been used in the past, recent developments in thermal protection systems, guidance and control, and interplanetary navigation capabilities enable the use of rigid, heritage entry vehicle configurations already flown at other planetary bodies for Ice Giants aerocapture. With the addition of these recent capabilities, aerocapture can robustly deliver spacecraft to Ice Giant orbits, while substantially increasing on-orbit payload mass (more than 40%) and reducing the transit time by 2-5 years (15-30%) relative to fully-propulsive orbit insertion.
The 2007 National Research Council (NRC) Decadal Survey on Earth Science and Applications from Space recommended Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) as a mid-term, Tier II, NASA space mission. ITT Exelis, formerly ITT Corp., and NASA Langley Research Center have been working together since 2004 to develop and demonstrate a prototype Laser Absorption Spectrometer for making high-precision, column CO2 mixing ratio measurements needed for the ASCENDS mission. This instrument, called the Multifunctional Fiber Laser Lidar (MFLL), operates in an intensity-modulated, continuous-wave mode in the 1.57- micron CO2 absorption band. Flight experiments have been conducted with the MFLL on a Lear-25, UC-12, and DC-8 aircraft over a variety of different surfaces and under a wide range of atmospheric conditions. Very high-precision CO2 column measurements resulting from high signal-to-noise (great than 1300) column optical depth measurements for a 10-s (approximately 1 km) averaging interval have been achieved. In situ measurements of atmospheric CO2 profiles were used to derive the expected CO2 column values, and when compared to the MFLL measurements over desert and vegetated surfaces, the MFLL measurements were found to agree with the in situ-derived CO2 columns to within an average of 0.17% or approximately 0.65 ppmv with a standard deviation of 0.44% or approximately 1.7 ppmv. Initial results demonstrating ranging capability using a swept modulation technique are also presented.
Volcanic eruptions, hurricanes, floods, and El Nino are naturally occurring events over which humans have no control. But can human activities cause additional environmental change? Can scientists predict the global impacts of increased levels of pollutants in the atmosphere? Will the planet warm because increased levels of greenhouse gases, produced by the burning of fossil fuels, trap heat and prevent it from being radiated back into space? Will the polar ice cap melt, causing massive coastal flooding? Have humans initiated wholesale climatic change? These are difficult questions, with grave implications. Predicting global change and understanding the relationships among earth's components have increased in priority for the nation. The National Aeronautics and Space Administration (NASA), along with many other government agencies, has initiated long-term studies of earth's atmosphere, oceans, and land masses using observations from satellite, balloon, and aircraft-borne instruments. NASA calls its research program Mission to Planet Earth. Because NASA can place scientific instruments far above earth's surface, the program allows scientists to explore earth's components and their interactions on a global scale.
The Radiative Heating Experiment, RHE, aboard the Aeroassist Flight Experiment, AFE, (now cancelled) was to make in-situ measurements of the stagnation region shock layer radiation during an aerobraking maneuver from geosynchronous to low earth orbit. The measurements were to provide a data base to help develop and validate aerothermodynamic computational models. Although cancelled, much work was done to develop the science requirements and to successfully meet RHE technical challenges. This paper discusses the RHE scientific objectives and expected science performance of a small sapphire window for the RHE radiometers. The spectral range required was from 170 to 900 nm. The window size was based on radiometer sensitivity requirements including capability of on-orbit solar calibration.
The satellite observations provide constraints on detailed atmospheric modeling, including emissions inventories, indications of transport, harmonized data over vast areas suitable for trends analysis, and a link between spatial scales ranging from local to global, and temporal scales from diurnal to interannual. 1 The National Oceanic and Atmospheric Administration's (NOAA) long-term commitments help provide these observations in cooperation with international meteorological organizations. NASA s long-term commitments will advance scientifically important observations as part of its Earth Science Program, and will assist the transition of the science measurements to applied analyses through the Applied Science Program. Both NASA and NOAA have begun to provide near realtime data and tools to visualize and analyze satellite data,2 while maintaining data quality, validation, and standards. Consequently, decision-makers can expect satellite data services to support air quality decision making now and in the future. The international scientific community's Integrated Global Atmosphere Chemistry Observation System Report3 outlined a plan for ground-based, airborne and satellite measurements and models to integrate the observations into a four-dimensional representation of the atmosphere (space and time) to support assessment and policy information needs. This plan is being carried out under the Global Earth Observation System of Systems (GEOSS). Demonstrations of such an integrated capability4 provide new understanding of the changing atmosphere and link policy decisions to benefits for society. In this article, we highlight the use of satellite data to constrain biomass burning emissions, to assess oxides of nitrogen (NO(x)) emission reductions, and to contribute to state implementation plans, as examples of the use of satellite observations for detecting and tracking changes in atmospheric composition.
NASA's Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology has been selected for a Technology Demonstration Mission under the Science and Technology Mission Directorate. HIADs are an enabling technology that can facilitate atmospheric entry of heavy payloads to planets such as Earth and Mars using a deployable aeroshell. The deployable nature of the HIAD technology allows it to overcome the size constraints imposed on current rigid aeroshell entry systems. This permits use of larger aeroshells resulting in increased entry system performance (e.g. higher payload mass and/or volume, higher landing altitude at Mars). The Low Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) is currently scheduled for mid-2021. LOFTID will be launched out of Vandenberg Air Force Base as a secondary payload on an expendable launch vehicle. The flight test will employ a 6m diameter, 70-deg sphere-cone aeroshell and will provide invaluable high-energy orbital re-entry flight data. This data will be essential in supporting the HIAD team to mature the technology to diameters of 10m and greater. Aeroshells of this scale will address near-term commercial applications and potential future NASA missions.LOFTID will incorporate an extensive instrumentation suite totaling over 150 science measurements. This will include thermocouples, heat flux sensors, IR cameras, and a radiometer to characterize the aeroheating environment and aeroshell thermal response. An inertial measurement unit (IMU), GPS, and flush air data system will be included in order to reconstruct the flown trajectory and aerodynamic characteristics. Loadcells will be used to measure the HIAD structural loading, and HD cameras will be mounted on the aft segment looking at the aeroshell to monitor structural response. In addition to the primary instrumentation suite, a new fiber optic sensing system will be used to measure nose temperatures as a technology demonstration. The LOFTID instrumentation suites leverages Agency-wide expertise, with hardware development occurring at Ames Research Center, Langley Research Center, Marshall Space Flight Center and Armstrong Flight Research Center.This presentation will discuss the measurement objectives for the LOFTID mission, and the extensive instrumentation suite that has been selected to capture the HIAD's performance during the high-energy orbital re-entry flight test.
NASA's Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology has been selected for a Technology Demonstration Mission under the Science and Technology Mission Directorate. HIADs are an enabling technology that can facilitate atmospheric entry of heavy payloads to planets such as Earth and Mars using a deployable aeroshell. The deployable nature of the HIAD technology allows it to overcome the size constraints imposed on current rigid aeroshell entry systems. This permits use of larger aeroshells resulting in increased entry system performance (e.g. higher payload mass and/or volume, higher landing altitude at Mars). The Low Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) is currently scheduled for mid-2021. LOFTID will be launched out of Vandenberg Air Force Base as a secondary payload on an expendable launch vehicle. The flight test will employ a 6m diameter, 70 degree sphere-cone aeroshell and will provide invaluable high-energy orbital re-entry flight data. This data will be essential in supporting the HIAD team to mature the technology to diameters of 10m and greater. Aeroshells of this scale will address near-term commercial applications and potential future NASA missions. LOFTID will incorporate an extensive instrumentation suite totaling over 150 science measurements. This will include thermocouples, heat flux sensors, IR cameras, and a radiometer to characterize the aeroheating environment and aeroshell thermal response. An inertial measurement unit (IMU), GPS, and flush air data system will be included in order to reconstruct the flown trajectory and aerodynamic characteristics. Loadcells will be used to measure the HIAD structural loading, and HD cameras will be mounted on the aft segment looking at the aeroshell to monitor structural response. In addition to the primary instrumentation suite, a new fiber optic sensing system will be used to measure nose temperatures as a technology demonstration. The LOFTID instrumentation suites leverages Agency-wide expertise, with hardware development occurring at Ames Research Center, Langley Research Center, Marshall Space Flight Center and Armstrong Flight Research Center. This presentation will discuss the measurement objectives for the LOFTID mission, and the extensive instrumentation suite that has been selected to capture the HIAD's performance during the high-energy orbital re-entry flight test.
The Galileo Probe, Pioneer-Venus probes, and SPRITE concept all share a number of common characteristics. They all follow a similar entry and descent sequence, using an aeroshell to protect against entry environments, and parachutes to aid in extrusion and descent speed control of the descent vehicle containing the science instruments. The descent vehicles all contained similar instruments (e.g. mass spectrometers and atmosphere structure sensors), and data was either relayed back to a carrier spacecraft (Galileo Probe, SPRITE) or transmitted direct to Earth (Pioneer-Venus). Based on these similar characteristics, NASA initiated a study to investigate a “common probe' that might be designed to perform similar science in a variety of planetary environments. This concept would leverage a common aeroshell design, and descent vehicle designs that could be made as similar as possible (the primary exception being that Venus will require a pressure vessel due to the extreme pressures and temperatures seen in the lower portion of the descent). To support the Common Probe study, GSFC and JPL performed a series of interplanetary trajectory analyses to help develop the mission designs for Venus, Jupiter, Saturn, Uranus, and Neptune. Primary considerations in the trajectory modeling included: a maximum of 12-year time of flight (for outer planet destinations), generation of both steep and shallow entry trajectories to each destination (where steep and shallow resulted in approximately 150 g and 50 g peak deceleration during entry at each location), and consideration of the data relay. Gravity assists and trajectories with low delta-V requirements (typically much less than 500 m/s) were also incorporated into the design process to enable launch on existing vehicles such as the Atlas V.
An analysis of the potential capabilities of a spectrally diversified DIAL technique for monitoring atmospheric species is presented assuming operation from an earth-orbiting platform. Emphasis is given to the measurement accuracies and spatial and temporal resolutions required to meet present atmospheric science objectives. The discussion points out advantages of spectral diversity to perform comprehensive studies of the atmosphere; in general it is shown that IR systems have an advantage in lower atmospheric measurements, while UV systems are superior for middle and upper atmospheric measurements.
The problem of flying an earth observing mission using a group of observatories flying in formation, rather than a single observatory, is addressed. Contraints placed on the design of the observatories and of the mission, if it is required that the instantaneous field of views of the two instruments overlap by a specified amount, are determined. The complexities of formation flying are found to greatly outweigh simpler solutions which combine instruments on a single spacecraft payload. While formation flying may be beneficial when crossing times and simultaneity arguments are not stringent, it is not practical for EOS. Accomplishment of the EOS scientific mission requires the simultaneous measurement of a basic set of earth system science parameters; it also requires that many events be observed by groups of instruments looking through the same atmospheric path.
The third Convection And Moisture EXperiment (CAMEX-3) was conducted from 6 August - 27 September 1998. CAMEX is a series of field experiments sponsored by the Earth Science Enterprise of the National Aeronautics and Space Administration (NASA). The overall goal of CAMEX-3 was to study atmospheric water vapor and precipitation processes using a unique array of aircraft, balloon, and land-based remote sensors for research in tropical cyclone development, tracking, intensification, and landfalling situations using NASA-funded aircraft and surface remote sensing instrumentation. This project collected high spatial and temporal information of hurricane structure, dynamics, and motion. The ER-2 and DC-8 were the primary NASA aircraft used in the deployment flying at altitudes of 65,000 and 35,000 feet, respectively. In addition, coordinated flights with NOAA WP-3 and Air Force Reserve Hurricane Hunters C-130 aircraft were developed so that some missions involved as many as five to six aircraft. This presentation will highlight the CAMEX-3 research. It will focus primarily on the unique observations gained while studying Hurricane Georges during four missions: 1) near St. Croix, 2) over the Domican Republic, 3) over the Florida Keys, and 4) near landfall on the Mississippi coast. In particular, observations obtained through the use of the ER-2 of the orographically forced precipitation as it interacted with Hispaniola on 22 September 1998 will be shown.
This report highlights the challenging work accomplished during fiscal year 1997 by Ames research scientists and engineers. The work is divided into accomplishments that support the goals of NASA s four Strategic Enterprises: Aeronautics and Space Transportation Technology, Space Science, Human Exploration and Development of Space (HEDS), and Earth Science. NASA Ames Research Center s research effort in the Space, Earth, and HEDS Enterprises is focused i n large part to support Ames lead role for Astrobiology, which broadly defined is the scientific study of the origin, distribution, and future of life in the universe. This NASA initiative in Astrobiology is a broad science effort embracing basic research, technology development, and flight missions. Ames contributions to the Space Science Enterprise are focused in the areas of exobiology, planetary systems, astrophysics, and space technology. Ames supports the Earth Science Enterprise by conducting research and by developing technology with the objective of expanding our knowledge of the Earth s atmosphere and ecosystems. Finallv, Ames supports the HEDS Enterprise by conducting research, managing spaceflight projects, and developing technologies. A key objective is to understand the phenomena surrounding the effects of gravity on living things. Ames has also heen designated the Agency s Center of Evcellence for Information Technnlogv. The three cornerstones of Information Technology research at Ames are automated reasoning, human-centered computing, and high performance computing and networking.
The Distributed Spacecraft Autonomy project is developing a suite of software tools that enable an operator to command and receive data from a swarm as a single entity, enable a swarm to autonomously coordinate its actions via distributed decision making and reactive closed-loop control, and model swarm behavior in the presence of anomalies or failures. Our use case is the mapping of the electron density of the ionosphere using radio tomography by coordinating the selection of appropriate GPS channels, and by recording Total Electron Count (TEC)measurements. DSA will be demonstrated on board the NASA Ames Starling mission a swarm of four small, LEO spacecraft, scheduled to launch in 2021. We will also perform a ground demonstration with simulated and hardware-in-the-loop elements, to validate the tools for controlling swarms of up to 100 assets.The capability to communicate autonomously between the swarm satellites is demonstrated via a sophisticated simulation architecture. Historical Plasma sphere TEC data obtained via dual-band Novatel GPS Receivers are utilized as a representative input data set for the swarm. The representative TEC data and GPS satellite observability information is fed to the autonomous software package in place of a true real-time ground data collection process. The swarm satellites actively share status updates amongst one another and utilize multi-agent decision making to optimally identify regions of interest in the TEC distribution. The software,aware of the bandwidth limitations of the swarm satellites, prioritizes explorative measurements,which define the range of observability for the satellites, as well as exploitative measurements,which focus on maximizing the observance potential of regions with prolonged, elevated TEC density. The science of this study can ultimately be used to determine the dynamics and coupling of Earth's magnetosphere, ionosphere, and atmosphere and their response to solar and terrestrial inputs. The findings can be applied to the imaging of critical, transient phenomena in the magnetosphere in later missions. Meanwhile, the swarm autonomy capabilities have far reaching potential in future satellite missions.As an experimental demonstration of the autonomous capabilities of the network, a message is first printed within a core Flight Executive (cFE) application. Two cFE applications that communicate with one another within the same core Flight System (cFS) are shown.Communication between mission applications on the internal cFE bus is extended to utilize Data Distribution Service (DDS) for vehicle-to-vehicle networking. The DDS middle ware provides reliable delivery, routing, and topic subscription features over User Data gram Protocol (UDP).Leveraging Linux containerization, a networked set of satellite instances are generated by script to simulate swarm behavior. Swarm commanding and synchronization through the network is demonstrated under various topologies and data-loss conditions. Finally, autonomous swarms calability from 2 satellites to 100 satellites is shown.
The Atmospheric Science Data Center (ASDC) at NASA Langley Research Center is responsible for the ingest, archive, and distribution of NASA Earth Science data in the areas of radiation budget, clouds, aerosols, and tropospheric chemistry. Currently, the ASDC supports more than 44 projects and has over 1,700 archived data sets, which increase daily. The ASDC’s implementation mission with iRODS is to establish a consolidated, shared services capability that will provide higher quality, more cost effective and efficient services, and greater access to our current science community users and future diverse customers.
The Atmospheric Science Data Center (ASDC) at NASA Langley Research Center is responsible for the ingest, archive, and distribution of NASA Earth Science data in the areas of radiation budget, clouds, aerosols, and tropospheric chemistry. Currently, the ASDC supports more than 44 projects and has over 1,700 archived data sets, which increase daily. The ASDC?s implementation mission with iRODS is to establish a consolidated, shared services capability that will provide higher quality, more cost effective and efficient services, and greater access to our current science community users and future diverse customers.
The World Climate Research Programme’s (WCRP) Global Energy and Water Exchanges (GEWEX) program is an integrated program of research, observations, and science activities with the mission to “Observe, understand and model the hydrological cycle and energy fluxes in the Earth’s atmosphere and at the surface.” Since the public release in 2010 of SRB Release 3, GEWEX reorganized to formulate the Data and Assessments Panel (GDAP) aimed at performing community assessments of the long-term global data products with focus on integrating various data products to address issues in the closing of the global energy and water cycles. SRB Release 4 Intergrated Product (Rel4-IP) integrates data products from the cloud, aerosol, atmosphere, ocean surface, and land surface projects within GDAP to produce a long-term time series of Top-of-Atmosphere (TOA) and surface radiative estimates. This Algorithm Theoretical Basis Document (ATBD) describes the various inputs, algorithms and resulting top-of-atmosphere and surface flux products that span from July 1983 through June 2017. Comparisons of the TOA flux products are made to overlapping CERES data products when possible. The surface radiative flux products are assessed relative to the globally distribution Baseline Surface Radiation Network measurements sites. Variability of the various products are compared to ERBE and CERES during overlapping time periods. The variability of the product show excellent correspondent to CERES during overlap years and improved statistical agreement with surface measurements. This document also discusses known issues with the data products to help the user understand the uncertainty and known issues.
This paper describes the contents of the 2016 edition of the HITRAN molecular spectroscopic compilation. The new edition replaces the previous HITRAN edition of 2012 and its updates during the intervening years. The HITRAN molecular absorption compilation is composed of five major components: the traditional line-by-line spectroscopic parameters required for high-resolution radiative-transfer codes, infrared absorption cross-sections for molecules not yet amenable to representation in a line-by-line form, collision-induced absorption data, aerosol indices of refraction, and general tables such as partition sums that apply globally to the data. The new HITRAN is greatly extended in terms of accuracy, spectral coverage, additional absorption phenomena, added line-shape formalisms, and validity. Moreover, molecules, isotopologues, and perturbing gases have been added that address the issues of atmospheres beyond the Earth. Of considerable note, experimental IR cross-sections for almost 300 additional molecules important in different areas of atmospheric science have been added to the database. The compilation can be accessed through www.hitran.org. Most of the HITRAN data have now been cast into an underlying relational database structure that offers many advantages over the long-standing sequential text-based structure. The new structure empowers the user in many ways. It enables the incorporation of an extended set of fundamental parameters per transition, sophisticated line-shape formalisms, easy user-defined output formats, and very convenient searching, filtering, and plotting of data. A powerful application programming interface making use of structured query language (SQL) features for higher-level applications of HITRAN is also provided.