Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTROMAGNETIC TESTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

An ECT/ERT dual-modality sensor for oil-water two-phase flow measurement

This paper presents a new sensor for ECT/ERT dual-modality system which can simultaneously obtain the permittivity and conductivity of the materials in the pipeline. Quasi-static electromagnetic fields are produced by the inner electrodes array sensor of electrical capacitance tomography (ECT) system. The results of simulation show that the data of permittivity and conductivity can be simultaneously obtained from the same measurement electrode and the fusion of two kinds of data may improve the quality of the reconstructed images. For uniform oil-water mixtures, the performance of designed dual-modality sensor for measuring the various oil fractions has been tested on representative data and the results of experiments show that the designed sensor broadens the measurement range compared to single modality.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Testing and Assessment of EMFs and Touch Currents from 25-kW IPT System for Medium-Duty EVs

Inductive power transfer (IPT) technology has gained massive attention for electric vehicle charging due to the associated reliability, convenience, and safety. Nevertheless, the loose coupling between the transmitter and receiver generates intensive electromagnetic fields (EMFs) around the system, which may influence living objects' safety if the typical limits are exceeded. Moreover, these fields induce voltages in the vehicle body, which may lead to touch current passing through the human body when it gets in contact with two metal parts or one part and the ground. Following the international standards and recommendations, this study presents comprehensive test guidelines for the near-EMFs and touch currents from a commercial 25-kW wireless charger from Momentum Dynamics, which was installed in an electric shuttle operating at the National Renewable Energy Laboratory (NREL) campus. The paper investigates the measuring devices, test setup, test points and standard limits. The impact of the misalignments on the measurements is considered during testing. EMFs are measured in areas around and inside the shuttle and near the power supply and compared with the reference levels defined by the international standards, including ICNIRP 2010, IEEE C95.1 and ACGIH TLV 2017. Touch currents are evaluated among different metal parts and ground in comparison with the standard limits. The results show that both EMFs and touch currents comply with the standard limits. Moreover, thermal inspection for the system after installation was provided. Finally, a 5-day of operation data for the wireless charger are collected and presented.

33 ADVANCED PROPULSION SYSTEMS↗

ULTRASOUND AND X-RAY CHARACTERIZATION OF DAMAGE IN ALUMINA STRUCTURAL CERAMICS

A combination of destructive and nondestructive testing methods was utilized to evaluate the impact velocity and energy conditions that caused fracture in alumina structural ceramics. Incremental damage was produced in aluminum-backed Al{sub 2}O{sub 3} tiles using drop tower testing for low velocity impact with a high mass indenter. The majority of damage in the fractured samples consisted of radial and cone cracking. The samples were nondestructively evaluated using digital radiography, x-ray computed tomography, and ultrasound C-scan imaging. Bulk damage detected by these techniques was compared to surface damage observed by visual inspection. Qualitative evaluation of surface and bulk cracks and quantitative percent damage assessment were used to compare the integrity of the nondestructive techniques. While all three methods were able to detect surface cracks, C-scan imaging was more effective at detecting internal damage in the alumina samples and x-ray computed tomography was more effective at producing three-dimensional images of the crack patterns.

36 MATERIALS SCIENCE↗

Measurement of parity violation in electron–quark scattering

Symmetry permeates nature and is fundamental to all laws of physics. One example is parity (mirror) symmetry, which implies that flipping left and right does not change the laws of physics. Laws for electromagnetism, gravity and the subatomic strong force respect parity symmetry, but the subatomic weak force does not1, 2. Historically, parity violation in electron scattering has been important in establishing (and now testing) the standard model of particle physics. One particular set of quantities accessible through measurements of parity-violating electron scattering are the effective weak couplings C2q, sensitive to the quarks’ chirality preference when participating in the weak force, which have been measured directly3, 4 only once in the past 40 years. Here we report a measurement of the parity-violating asymmetry in electron–quark scattering, which yields a determination of 2C2u-C2d (where u and d denote up and down quarks, respectively) with a precision increased by a factor of five relative to the earlier result. These results provide evidence with greater than 95 per cent confidence that the C2q couplings are non-zero, as predicted by the electroweak theory. They lead to constraints on new parity-violating interactions beyond the standard model, particularly those due to quark chirality. Whereas contemporary particle physics research is focused on high-energy colliders such as the Large Hadron Collider, our results provide specific chirality information on electroweak theory that is difficult to obtain at high energies. Our measurement is relatively free of ambiguity in its interpretation, and opens the door to even more precise measurements in the future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New HANE Fireball Physics: Implications for US Infrastructure Vulnerability

The vulnerability of the US infrastructure to High altitude Nuclear Explosions (HANEs) continues to be the object of studies by a number of blue-ribbon panels and commissions. In particular, studies suggest an alarming sensitivity of our electronic infrastructure to some types of ElectroMagnetic Pulse (EMP) while other types of EMP threaten our power distribution systems. Equally or perhaps more important is the concern that a large percentage of our satellites will experience 'upsets' or worse from these same HANE effects. Such studies, however, are all based on the sparse data obtained during the last HANE tests conducted in the early 1960's. A weakness in our present understanding is that almost all the conclusions about distributed-electric-current-driven EMP, with time scales 1/2 second or longer, are interpretations of old data guided by the computational MHD/fluid models available at the time. Fluid models make the assumption that the mean-free-path is zero and thus miss important physics regardless of the model used to couple ion motion to the magnetic field. Even when planetary length scales are modeled so that the gyro radius becomes negligible, the early dynamics of the fireball are not properly captured. The facts are, at relevant altitudes, the explosion expansion is almost unimpeded by the tenuous ionospheric background-particle mean-free-paths are of order 10,000 km. The primary impediment to the debris expansion is the earth's magnetic field bending the energetic ion trajectories emanating from the explosion into circular orbits with typical radii that range from 200 km for heavy ions to 10 km or less for the lighter ions in the debris. These particles thus gyrate many times before they are stopped by a collision with the background atmosphere. Only models that track ion gyro-motion can recover the myriad possibilities through which the complicated, energetic, 'fireball' of debris may evolve. Fireball evolution is important because it determines debris distribution (crucial in satellite vulnerability studies) and generation of low frequency EMP. With the previous considerations as motivation, we have recently reconsidered the early fireball dynamics to see if more appropriate physics models would reveal new insight into some long-standing problems, such as the apparent need for 'jetting' of debris particles to high altitude to explain the observed satellite damage. Additionally, we hoped that the additional physics might reveal new aspects of the early fireball dynamics that could augment the rather incomplete understanding we now have of the EMP generated by such tests.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PRODUCTION PROCESS MONITORING OF MULTILAYERED MATERIALS USING TIME-DOMAIN TERAHERTZ GAUGES

The results of both a laboratory and factory trial of a time-domain terahertz (TD-THz) multi-layer gauge for on-line process monitoring are presented. The TD-THz gauge is demonstrated on a two layer laminated plastic insulation material. The TD-THz gauge simultaneously measured the total and the individual layer thicknesses. Measurements were made while transversely scanning across a 12 foot wide sheet extruded at high speed in a factory environment. The results were analyzed for precision, accuracy, and repeatability; and demonstrated that the TD-THz gauge performed in an equivalent or superior manner to existing ionizing radiation gauges (which measure only one layer). Many dielectric materials (e.g., plastic, rubber, paper, paint) are transparent to THz pulses, and the measurement of a wide range of samples is possible.

36 MATERIALS SCIENCE↗

Backscatter x-ray development for space vehicle thermal protection systems

The Backscatter X-Ray (BSX) imaging technique is used for various single sided inspection purposes. Previously developed BSX techniques for spray-on-foam insulation (SOFI) have been used for detecting defects in Space Shuttle External Tank foam insulation. The developed BSX hardware and techniques are currently being enhanced to advance Non-Destructive Evaluation (NDE) methods for future space vehicle applications. Various Thermal Protection System (TPS) materials were inspected using the enhanced BSX imaging techniques, investigating the capability of the method to detect voids and other discontinuities at various locations within each material. Calibration standards were developed for the TPS materials in order to characterize and develop enhanced BSX inspection capabilities. The ability of the BSX technique to detect both manufactured and natural defects was also studied and compared to through-transmission x-ray techniques. The energy of the x-ray, source to object distance, angle of x-ray, focal spot size and x-ray detector configurations were parameters playing a significant role in the sensitivity of the BSX technique to image various materials and defects. The image processing of the results also showed significant increase in the sensitivity of the technique. The experimental results showed BSX to be a viable inspection technique for space vehicle TPS systems.

07 ISOTOPE AND RADIATION SOURCES↗

Lorentz Mapping of Magnetic Fields in Hot Dense Plasmas

Unique detection of electromagnetic fields and identification of field type and strength as a function of position were used to determine the nature of self-generated fields in a novel experiment with laser-generated plasma bubbles on two sides of a plastic foil. Field-induced deflections of monoenergetic 15-MeV probe protons passing through the two bubbles, measured quantitatively with proton radiography, were combined with Lorentz mapping to provide separate measurements of magnetic and electric fields. The result was absolute identification and measurement of a toroidal magnetic field around each bubble and determination that any electric field component parallel to the foil was below measurement uncertainties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RF generation in the DARHT Axis-II beam dump

We have occasionally observed radio-frequency (RF) electromagnetic signals in the downstream transport (DST) of the second axis linear induction accelerator (LIA) at the dual-axis radiographic hydrodynamic testing (DARHT) facility. We have identified and eliminated some of the sources by eliminating the offending cavities. However, we still observe strong RF in the range 1 GHz t0 2 GHz occurring late in the ~2-μs pulse that can be excited or prevented by varying the downstream tune. The narrow frequency width (<0.5%) and near exponential growth at the dominant frequency is indicative of a beam-cavity interaction, and electro-magnetic simulations of cavity structure show a spectrum rich in resonances in the observed frequency range. However, the source of beam produced RF in the cavity resonance frequency range has not been identified, and it has been the subject of much speculation, ranging from beam-plasma or beam-ion instabilities to unstable cavity coupling.

43 PARTICLE ACCELERATORS↗

Design of a high power 8 MeV electron beam injector for the LERF

We present the beamline design for a high power 8 MeV electron injector to be installed at the Low Energy Recirculator Facility (LERF). The injector is designed to provide beam power of up to 80 kW for testing positron source target candidates. We discuss the results of beam dynamics simulations conducted using the General Particle Tracer (GPT) software, where electromagnetic beamline elements were optimized using multi-objective genetic algorithm tools. Additionally, we present preliminary studies on secondary particle generation from both rotating solid and free surface liquid metal jet targets described elsewhere in this workshop.

Lizarraga-Rubio, Victor [Thomas Jefferson National↗

Design of a high power 8 MeV electron beam injector for the LERF

Here, we present the beamline design for a high power 8 MeV electron injector to be installed at the Low Energy Recirculator Facility (LERF). The injector is designed to provide beam power of up to 80 kW for testing positron source target candidates. We discuss the results of beam dynamics simulations conducted using the General Particle Tracer (GPT) software, where electromagnetic beamline elements were optimized using multi-objective genetic algorithm tools. Additionally, we present preliminary studies on secondary particle generation from both rotating solid and free surface liquid metal jet targets described elsewhere in this workshop.

Lizarraga-Rubio, Victor Manuel [Thomas Jefferson N↗

Optimization of sensors based on surface waves in flat-layered structures

A method for increasing the sensitivity of surface-wave sensors in multifilm structures is proposed based on the results of a theoretical study of the reflection of a plane electromagnetic wave from a flat-layered structure containing homogeneous films. A method for optimizing the parameters of the films forming the surface structure is developed and tested. The devices proposed are characterized by high field amplification in a surface layer of multifilm structure and a higher sensitivity to variations in the optical properties of the thin near-surface layer. Application of the proposed multifilm structures is expected to increase significantly the sensitivity of the existing sensors based on surface-plasmon polaritons, which are applied in modern optical multichannel biological, chemical, and physical sensor systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Testing gravitational parity violation with coincident gravitational waves and short gamma-ray bursts

Gravitational parity violation is a possibility motivated by particle physics, string theory, and loop quantum gravity. One effect of it is amplitude birefringence of gravitational waves, whereby left and right circularly polarized waves propagate at the same speed but with different amplitude evolution. Here we propose a test of this effect through coincident observations of gravitational waves and short gamma-ray bursts from binary mergers involving neutron stars. Such gravitational waves are highly left or right circularly polarized due to the geometry of the merger. Using localization information from the gamma-ray burst, ground-based gravitational wave detectors can measure the distance to the source with reasonable accuracy. An electromagnetic determination of the redshift from an afterglow or host galaxy yields an independent measure of this distance. Gravitational parity violation would manifest itself as a discrepancy between these two distance measurements. We exemplify such a test by considering one specific effective theory that leads to such gravitational parity violation, Chern-Simons gravity. We show that the advanced LIGO-Virgo network and all-sky gamma-ray telescopes can be sensitive to the propagating sector of Chern-Simons gravitational parity violation to a level roughly 2 orders of magnitude better than current stationary constraints from the LAGEOS satellites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stress-induced martensitic transformation during tensile test of full-size TF conductor jacket tube at 4.2 K

The toroidal-field (TF) conductor jacket of International Thermonuclear Experimental Reactor (ITER) is made of modified 316LN stainless steel, which is influenced by heat treatment at approximately 650 °C for 200 h to produce Nb{sub 3}Sn superconducting materials at the final stage. Due to the high electromagnetic forces arising during magnet operation, higher mechanical properties of the jacket materials at cryogenic temperatures are required. In our work, mechanical properties of the full-size TF conductor jacket tube were investigated, which satisfied the ITER requirements. Stress-induced martensitic transformation mechanism during tensile test of the conductor jacket material at 4.2 K was characterized by means of in-situ temperature dependent XRD, vibrating sample magnetometer (VSM) and in conjunction with transmission electron microscopy (TEM). The tensile behavior related to the amount of stress-induced phase transformation at cryogenic temperature was also discussed.

36 MATERIALS SCIENCE↗

Level 2 Milestone: Develop and Incorporate Novel Code Verification of Fundamental Equations in Gemma and Set Up Appropriate Tests

For computational physics simulations, code verification plays a major role in establishing the credibility of the results by assessing the correctness of the implementation of the underlying numerical methods. In computational electromagnetics, surface integral equations, such as the method-of-moments implementations of the electric-, magnetic-, and combinedfield integral equations, are frequently used to solve Maxwell’s equations on the surfaces of electromagnetic scatterers. These electromagnetic surface integral equations yield many code-verification challenges due to the various sources of numerical error and their possible interactions. In this report, we provide approaches to separately measure the numerical errors arising from these different error sources. We demonstrate the effectiveness of these approaches in Gemma.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Interacting quantum and classical waves: Resonant and non-resonant energy transfer to electrons immersed in an intense electromagnetic wave

Dynamics of electrons subjected to a constant amplitude classical electromagnetic (EM) wave is investigated as a fundamental, representative problem in the physics of interacting quantum and classical waves. In the nonrelativistic regime (electrons as Schrödinger waves), the electron energy acquires a constant and a time dependent part. Driven by EM waves, both parts scale strongly with the amplitude, but we expect no resonant enhancement since the parallel electron “speed” of nonrelativistic electrons could never match the wave phase velocity. In the relativistic regime (electron as a Klein–Gordon wave), however, a class of electron waves (with parallel speed matching the EM phase speed) are resonantly excited to extremely high energies. Such a direct resonant energy transfer from intense electromagnetic waves constitutes a mechanism that could, in principle, power the most energetic of cosmic rays (this mechanism will work on protons just as well). Some predictions of the theory will, hopefully, be tested in laboratory laser experiments. In conclusion, the nonrelativistic calculations will also be examined in the context of recent experiments using photon-induced near-field electron microscopy in detail.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

eSHIVA in IOTA: Experiment on Stochasticity in High Intensity Variable Accelerators

Nonlinear integrable optics, the basis of IOTA, is a very special form of Hamiltonian system, called completely integrable. The consequences are many, most importantly the absence of fixed points that are in one-to-one correspondence with (overlapping) resonances. This, in turn, does not limit the dynamic aperture and allows large amplitude dependent tune shifts without adverse effects. In fact, it helps significantly in alleviating issues with collective instabilities. We developed and tested different numerical methods to give a more complete picture of the dynamics of integrable and near-integrable nonlinear Hamiltonian systems consisting of motion of charged particles in electromagnetic fields. Comparison of the results allowed us to discern real phenomena from numerical artifacts and come up with conclusions that will facilitate pushing the intensity frontier in beam dynamics even further for the benefit of the accelerator community as a whole and society as the consequence of the science and technological advancements it will make possible. We concluded that, while novel structure preserving integrators would be ideal, symplectic methods under mild restrictions offer adequate invariant preservation. We especially highlighted the very good performance of the Stormer-Verlet method at low accuracy and a modified Lobatto method at high accuracy for the Integrable Optics Test Accelerator (IOTA). However, we showed that symplectic integrators are limited by numerically induced resonances, which make interpretation of some simulation results challenging. These limitations and workarounds have been addressed.The nonlinear integrable optics test accelerator IOTA at Fermilab -- a very special experimental accelerator designed to investigate nonlinear optics under severe space-charge conditions – has recently completed its construction and initial commissioning of the ring has begun. We report first, under 2 (a) below: the progress on the nonlinear tune-shift measurements for various values of the nonlinear strength potential and their comparison with theoretical expectations, thus benchmarking the nonlinear characteristics of the ring; then, under 2 (b) below: the progress on simulation and design of a gas-jet monitor to measure beam profile and in particular its diffusive halo, expected to develop during stochastic diffusion of large amplitude particles under nonlinear forces of the magnetic lattice and Coulomb space-charge. Since the development of a proton beam source in IOTA is delayed and to be completed only in the future pending financial support, the gas-jet monitor is planned for testing with real proton beams elsewhere at Fermilab (e.g. in the Main Injector or PIP-II source possibly). Once proton beams are available in IOTA, the understanding of the nonlinear properties of IOTA combined with the developed gas-jet monitor, will enable a thorough experimental analysis of nonlinear stochastic diffusion in IOTA nonlinear ring, and boosted by proper theoretical understanding of the same.

43 PARTICLE ACCELERATORS↗

A detailed map of Higgs boson interactions by the ATLAS experiment ten years after the discovery

The standard model of particle physics describes the known fundamental particles and forces that make up our Universe, with the exception of gravity. One of the central features of the standard model is a field that permeates all of space and interacts with fundamental particles. The quantum excitation of this field, known as the Higgs field, manifests itself as the Higgs boson, the only fundamental particle with no spin. In 2012, a particle with properties consistent with the Higgs boson of the standard model was observed by the ATLAS and CMS experiments at the Large Hadron Collider at CERN. Since then, more than 30 times as many Higgs bosons have been recorded by the ATLAS experiment, enabling much more precise measurements and new tests of the theory. Here, on the basis of this larger dataset, we combine an unprecedented number of production and decay processes of the Higgs boson to scrutinize its interactions with elementary particles. Interactions with gluons, photons, and W and Z bosons—the carriers of the strong, electromagnetic and weak forces—are studied in detail. Interactions with three third-generation matter particles (bottom (b) and top (t) quarks, and tau leptons (τ)) are well measured and indications of interactions with a second-generation particle (muons, μ) are emerging. These tests reveal that the Higgs boson discovered ten years ago is remarkably consistent with the predictions of the theory and provide stringent constraints on many models of new phenomena beyond the standard model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗