Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Laboratory study of premixed H{sub 2}-air and H{sub 2}-N{sub 2}-air flames in a low-swirl injector for ultralow emissions gas turbines - article no. 031503

The objective of this study is to conduct laboratory experiments on low-swirl injectors (LSIs) to obtain the basic information for adapting LSI to burn H{sub 2} and diluted H{sub 2} fuels that will be utilized in the gas turbines of the integrated gasification combined cycle coal power plants. The LSI is a novel ultralow emission dry-low NOx combustion method that has been developed for gas turbines operating on natural gas. It is being developed for fuel-flexible turbines burning a variety of hydrocarbon fuels, biomass gases, and refinery gases. The adaptation of the LSI to accept H{sub 2} flames is guided by an analytical expression derived from the flow field characteristics and the turbulent flame speed correlation. The evaluation of the operating regimes of nine LSI configurations for H{sub 2} shows an optimum swirl number of 0.51, which is slightly lower than the swirl number of 0.54 for the hydrocarbon LSI. Using particle image velocimetry (PIV), the flow fields of 32 premixed H{sub 2}-air and H{sub 2}-N{sub 2}-air flames were measured. The turbulent flame speeds deduced from PIV show a linear correlation with turbulence intensity. The correlation constant for H{sub 2} is 3.1 and is higher than the 2.14 value for hydrocarbons. The analysis of velocity profiles confirms that the near field flow features of the H{sub 2} flames are self-similar. These results demonstrate that the basic LSI mechanism is not affected by the differences in the properties of H{sub 2} and hydrocarbon flames and support the feasibility of the LSI concept for hydrogen fueled gas turbines.

20 FOSSIL-FUELED POWER PLANTS↗

Simulating flame lift-off characteristics of diesel and biodiesel fuels using detailed chemical-kinetic mechanisms and LES turbulence model.

Combustion in direct-injection diesel engines occurs in a lifted, turbulent diffusion flame mode. Numerous studies indicate that the combustion and emissions in such engines are strongly influenced by the lifted flame characteristics, which are in turn determined by fuel and air mixing in the upstream region of the lifted flame, and consequently by the liquid breakup and spray development processes. From a numerical standpoint, these spray combustion processes depend heavily on the choice of underlying spray, combustion, and turbulence models. The present numerical study investigates the influence of different chemical kinetic mechanisms for diesel and biodiesel fuels, as well as Reynolds-averaged Navier-Stokes (RANS) and large eddy simulation (LES) turbulence models on predicting flame lift-off lengths (LOLs) and ignition delays. Specifically, two chemical kinetic mechanisms for n-heptane (NHPT) and three for biodiesel surrogates are investigated. In addition, the RNG k-{epsilon} (RANS) model is compared to the Smagorinsky based LES turbulence model. Using adaptive grid resolution, minimum grid sizes of 250 {micro}m and 125 {micro}m were obtained for the RANS and LES cases respectively. Validations of these models were performed against experimental data from Sandia National Laboratories in a constant volume combustion chamber. Ignition delay and flame lift-off validations were performed at different ambient temperature conditions. The LES model predicts lower ignition delays and qualitatively better flame structures compared to the RNG k-{epsilon} model. The use of realistic chemistry and a ternary surrogate mixture, which consists of methyl decanoate, methyl 9-decenoate, and NHPT, results in better predicted LOLs and ignition delays. For diesel fuel though, only marginal improvements are observed by using larger size mechanisms. However, these improved predictions come at a significant increase in computational cost.

33 ADVANCED PROPULSION SYSTEMS↗

Flame Experiments at the Advanced Light Source: New Insights into Soot Formation Processes

The following experimental protocols and the accompanying video are concerned with the flame experiments that are performed at the Chemical Dynamics Beamline of the Advanced Light Source (ALS) of the Lawrence Berkeley National Laboratory. This video demonstrates how the complex chemical structures of laboratory-based model flames are analyzed using flame-sampling mass spectrometry with tunable synchrotrongenerated vacuum-ultraviolet (VUV) radiation. This experimental approach combines isomer-resolving capabilities with high sensitivity and a large dynamic range. The first part of the video describes experiments involving burner-stabilized, reduced-pressure (20-80 mbar) laminar premixed flames. A small hydrocarbon fuel was used for the selected flame to demonstrate the general experimental approach. It is shown how species’ profiles are acquired as a function of distance from the burner surface and how the tunability of the VUV photon energy is used advantageously to identify many combustion intermediates based on their ionization energies. For example, this technique has been used to study gas-phase aspects of the soot-formation processes, and the video shows how the resonance-stabilized radicals, such as C 3 H 3 , C 3 H 5 , and i-C 4 H 5 , are identified as important intermediates. The work has been focused on soot formation processes, and, from the chemical point of view, this process is very intriguing because chemical structures containing millions of carbon atoms are assembled from a fuel molecule possessing only a few carbon atoms in just milliseconds. The second part of the video highlights a new experiment, in which an opposed-flow diffusion flame and synchrotron-based aerosol mass spectrometry are used to study the chemical composition of the combustion-generated soot particles. The experimental results indicate that the widely accepted H-abstraction-C 2 H 2 -addition (HACA) mechanism is not the sole molecular growth process responsible for the formation of the observed large polycyclic aromatic hydrocarbons (PAHs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and numerical analysis of stratified turbulent V-shaped flames

The present paper is devoted to (i) the experimental study of partially premixed combustion with strong equivalence ratio gradients, i.e., stratification of the reactive mixture and (ii) the numerical modeling of turbulent reactive flows in such situations where reactants are far from being ideally premixed. From a practical point of view, at least two variables are necessary to describe the local thermochemistry in this case: the mixture fraction {xi} and the fuel mass fraction Y{sub f} are considered to represent respectively the local composition of the fresh mixture and the progress of chemical reactions. From the experimental point of view, the use of simultaneous imaging techniques allows the evaluation of both variables in terms of fuel mole fraction and temperature. In the present study, a combined acetone PLIF measurement and Rayleigh scattering technique is used. The influence of temperature on the fluorescence signal is corrected thanks to the knowledge of the local temperature through Rayleigh scattering measurements. Conversely, the influence of the acetone Rayleigh cross section can be evaluated with the local value of acetone mole fraction. Using the iterative procedure already described by Degardin et al. [Exp. Fluids 40 (2006) 452-463], the corrected fuel mole fraction and temperature fields can be obtained. Here the particular flow configuration under study is a stratified turbulent V-shaped flame of methane and air. In a first step of the analysis, the optical diagnostics are used to perform a detailed investigation of the flame thickness with a special emphasis on the influence of partially premixed conditions. In a second step, experimental data are used to evaluate the LW-P model as defined by Robin et al. [Combust. Sci. Technol. 178 (10-11) (2006) 1843-1870] to calculate turbulent reactive flows with partially premixed conditions based on an earlier analysis by Libby and Williams [Combust. Sci. Technol. 161 (2000) 351-390]. The closure problem raised by the mean scalar dissipation terms is also discussed in the light of experimental results. Since the usual closures for nonreactive flows are expected to be unsuitable to describe reactive scalar fluctuations decay a new modeling proposal based on the recent developments of Mura et al. [Combust. Flame 149 (2007) 217-224] is used. After a preliminary validation step where numerical predictions of the flame mean quantities are compared successfully with the experimental database, numerical simulations are used to describe the mean structure of stratified flames and in particular the evolution of the mean chemical reaction rate for different partially premixed conditions. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flame acceleration in channels with obstacles in the deflagration-to-detonation transition

It was demonstrated recently in Bychkov et al. [Bychkov et al., Phys. Rev. Lett. 101 (2008) 164501], that the physical mechanism of flame acceleration in channels with obstacles is qualitatively different from the classical Shelkin mechanism. The new mechanism is much stronger, and is independent of the Reynolds number. The present study provides details of the theory and numerical modeling of the flame acceleration. It is shown theoretically and computationally that flame acceleration progresses noticeably faster in the axisymmetric cylindrical geometry as compared to the planar one, and that the acceleration rate reduces with increasing Mach number and thereby the gas compressibility. Furthermore, the velocity of the accelerating flame saturates to a constant value that is supersonic with respect to the wall. The saturation state can be correlated to the Chapman-Jouguet deflagration as well as the fast flames observed in experiments. The possibility of transition from deflagration-to-detonation in the obstructed channels is demonstrated. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical probe diagnostics for the laminar flame quenching distance

A simplified theory, previously developed for the general case of weakly ionized gas flow, is used to predict electrical probe response when the flame is quenched on the probe surface. This theory is based on the planar model of space charge sheaths around the measuring electrode. For the flame quenching case, by assuming that the sheath thickness is comparable with the thermal boundary layer thickness, probe current can be related to flame quenching distance. The theoretical assumptions made to obtain the analytical formulation of probe current were experimentally proved by using direct visualization and high-frequency PIV. The direct visualization method was also used to validate the results of flame quenching distance values obtained with electrical probe. The electrical probe diagnostics have been verified for both head-on and sidewall flame quenching regimes and for stoichiometric methane/air and propane/air mixtures in a pressure range of 0.05-0.6 MPa. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of flow field scaling on flashback of swirl flames

In this paper, the effect of geometrical scaling on the onset of flashback into a cylindrical premixing zone of a swirl flame is investigated. We discriminate two types of flashback. In the first type of flashback the flame propagates upstream inside an already present axial recirculation zone. This flashback is caused by turbulent burning along the vortex axis (TBVA) and is controlled by flame extinction inside the recirculation zone. The second type of flashback is caused by combustion induced vortex breakdown (CIVB). This type of flashback is characterised by the aerodynamic influence of the combustion heat release that leads to propagation of the axial recirculation zone and the flame in upstream direction. To study the effects of geometrical scaling on the flow fields and the two types of flashback, the operation of two geometrically scaled burners are compared at equal Reynolds number. By this method it is possible to observe the flashback phenomena in similar swirl flow fields but with different turbulent scales affecting the combustion process. To check flow field similarity and to indentify the flashback type, the non-reacting and reacting flow fields have been examined by planar particle imaging velocimetry and simultaneous recording of the flame luminescence. It is shown that geometrical scaling of the burner shifts the equivalence ratio at which flashback occurs and that this shift is different for the two types of flashback. Consistency and inconsistency with known scaling and stability criterions is discussed. Analysing the fluid dynamics and turbulent combustion gives a first explanation of why CIVB and TBVA are affected differently by geometrical scaling at constant Reynolds number which is in good agreement with the experimental observations. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of a combustion-driven oscillation on global mixing in the flame from a refinery flare

An assessment of the influence of strong combustion-driven oscillations on mixing rates and visible radiation in the flame from a full-scale refinery flare is reported. Importantly, the oscillations were generated naturally, with no external forcing, and at a high Reynolds number of 4 x 10{sup 6}. These conditions differentiate this study from those of previous investigations, which all involved some external forcing and were at a Re too low to ensure fully turbulent flow within the flame. A frame-by-frame analysis of video footage, providing good resolution of the instantaneous edge of each flame, was used to assess flame dimensions, and so to determine a global residence time. Since the flames are in the fast-chemistry regime, the visual imagers can be used to determine a global mixing rate. The analysis reveals a consistent picture that the combustion-driven oscillations do not result in a significant change to the global mixing rate, but do increase the visible radiation. This is in contrast to previous investigations, using externally forced jets, where forcing at the preferred mode has been found to increase mixing rates and reduce radiation. (author)

02 PETROLEUM↗

Chemical structures of low-pressure premixed methylcyclohexane flames as benchmarks for the development of a predictive combustion chemistry model

The chemical compositions of three low-pressure premixed flames of methylcyclohexane (MCH) are investigated with the emphasis on the chemistry of MCH decomposition and the formation of aromatic species, including benzene and toluene. The flames are stabilized on a flat-flame (McKenna type) burner at equivalence ratios of φ = 1.0, 1.75, and 1.9 and at low pressures between 15 Torr (= 20 mbar) and 30 Torr (= 40 mbar). The complex chemistry of MCH consumption is illustrated in the experimental identification of several C 7 H 12 , C 7 H 10 , C 6 H 12 , and C 6 H 10 isomers sampled from the flames as a function of distance from the burner. Three initiation steps for MCH consumption are discussed: ring-opening to heptenes and methyl-hexenes (isomerization), methyl radical loss yielding the cyclohexyl radical (dissociation), and H abstraction from MCH. Mole fraction profiles as a function of distance from the burner for the C 7 species supplemented by theoretical calculations are presented, indicating that flame structures resulting in steeper temperature gradients and/or greater peak temperatures can lead to a relative increase in MCH consumption through the dissociation and isomerization channels. Trends observed among the stable C 6 species as well as 1,3-pentadiene and isoprene also support this conclusion. Relatively large amounts of toluene and benzene are observed in the experiments, illustrating the importance of sequential H-abstraction steps from MCH to toluene and from cyclohexyl to benzene. Furthermore, modeled results using the detailed chemical model of Pitz et al. (Proc. Combust. Inst.2007, 31, 267–275) are also provided to illustrate the use of these data as a benchmark for the improvement or future development of a MCH mechanism.

30 DIRECT ENERGY CONVERSION↗

Thermal and Flame Retardancy Behavior of Oil Palm Based Epoxy Nanocomposites

The aim of present study was to investigate the thermal properties and flame retardancy behavior of flame retardant (FR) epoxy nanocomposites from chemically treated (bromine water and tin chloride) oil palm empty fruit bunch (OPEFB) nano filler at different filler loading (1, 3, 5%). Thermal properties were evaluated through thermogravimetry analyzer, derivative thermogravimetry and differential scanning calorimetry. FR properties of nanocomposites are evaluated through UL-94 vertical burning test and limiting oxygen index (LOI). The functional group analysis of all composites was made by FTIR spectroscopy. Thermal analysis shows that degradation temperature of epoxy composites shifts from 370 to 410 °C and char yield also increases for 3% loading. Furthermore LOI value of 29% and UL-94 rating of V-0 with no flame dripping and cotton ignition, revealed that 3% oil palm nano filler filled epoxy nanocomposites display satisfactory flame retardancy. The superior flame retardancy of epoxy nanocomposites are attributed to the chemical reactions occurred in the gaseous phases and the profound synergistic flame retardation effect of tin with bromine in the treated nano OPEFB filler. All the epoxy nanocomposites displayed almost similar FTIR spectra with the characteristics metal-halogen bond supporting the synergism. Homogeneous dispersion of 3% oil palm nano filler act as highly effective combustion chain terminating agent compared with 1 and 5% nano OPEFB/epoxy nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A petascale direct numerical simulation study of the modelling of flame wrinkling for large-eddy simulations in intense turbulence

A new set of petascale direct numerical simulations (DNS) modelling lean hydrogen combustion with detailed chemistry in a temporally evolving slot-jet configuration is presented as a database for the development and validation of models for premixed turbulent combustion. The jet Reynolds number is 10,000, requiring grid numbers up to nearly seven billion, which was achieved by computation on 120,000 processor cores. In contrast to many prior DNS studies, a mean shear exists that drives strong turbulent mixing within the flame structure. Three cases are simulated with different Damköhler numbers, while Reynolds number is held fixed. Basic statistics are presented showing that integrated burning rates up to approximately six times the laminar burning rate are obtained. It is shown that increased flame surface area accounts for most of the enhanced burning while increases in the burning rate per unit area also play an important contribution. The database is then used to assess a new model of flame wrinkling intended for large-eddy simulations (LES). The approach draws on concepts from fractal geometry, requiring the modelling of an inner cut-off scale representing the smallest scale of flame wrinkling, and the fractal dimension controlling the resolution dependence of the unresolved flame surface area. In contrast to previous modelling, it is argued that the inner cut-off should be filter-size invariant in an inertial range. Then, dimensional and physical reasoning together with Damköhler’s limiting scaling laws for the turbulent flame speed are used to infer the cut-off and fractal dimension in limiting regimes. Two methods of determining the fractal dimension are proposed: a static, algebraic expression or a dynamic approach exploiting a Germano-type identity. Finally the model is compared against the DNS in a priori tests and is found to give excellent results, quantitatively capturing the trends with time, space, filter size and Damköhler number.

Energy & Fuels↗

Sparse, iterative simulation methods for one-dimensional laminar flames

Sparse, iterative simulation methods for one-dimensional laminar flames are proposed. The resulting steady and unsteady flame solvers exploit approximate Jacobians to greatly reduce the computational cost associated with matrix operations. The constant, non-unity Lewis number assumption is introduced to further reduce the computational cost. The solvers are also parallelized to reduce time-to-solution on distributed memory computer systems. Computed laminar flame speeds and species profiles for a range of chemical mechanisms (from 10 to 2878 species) are compared against a well-validated commercial code and are found to be consistent within solver tolerances. The computation times of both the unsteady and steady solutions increase only linearly with the number of species, which is a significant improvement over the quadratic or cubic scaling of existing steady-state flame solvers. For the largest mechanism tested, the steady-state flame solver is two orders of magnitude faster than commonly-used codes. The use of an approximate Jacobian is shown to reduce the rate of convergence for the steady-state solver, but does not significantly affect the domain of convergence. The steady-state solver with approximate Jacobian is thus well suited for computationally efficient laminar flame speed sweeps with large kinetic mechanisms.

42 ENGINEERING↗

Reduced chemical kinetic model for CH 4 -air non-premixed flames including excited and charged species

Electric fields can impact small laminar flames by changing their shape and overall behavior by acting on charged species produced in combustion. However, no reduced chemical kinetic model has been developed considering both major species and minor species related to flame characterization and flame behavior in the presence of an electric field. Here, this study presents a reduced chemical kinetic model for methane-air combustion which includes minor excited species (CH*and OH*) and charged species (H 3 O + , HCO + , C 2 H 3 O + , CH 5 O + , O$_{2}^{–}$, OH – , e – , CO$_{3}^{–}$, CHO$_{2}^{–}$, O – , CHO$_{3}^{–}$). The results employing the reduced chemistry model have been validated for a two-dimensional flame geometry by comparison with (i) detailed chemistry simulation results for species location and peak values, and (ii) experimental CH* chemiluminescence location, considering the self-repulsion of charges yet without externally applied electric field to the flame. This reduced chemical kinetic model, with 45 species and 216 reactions, shows a computational demand one-third that of employing its equivalent detailed chemistry (83 species and 394 reactions). The reduction is modest but significant considering that high fidelity is needed to capture the behavior of the chemi-ion and chemiluminescent species. Future works will involve the use of this model for simulations predicting flame behavior with applied electric field (i.e., field strength ≠0 kV/cm).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

2D CFD of lean premixed hydrogen–air flame quenching under locomotive engine conditions

Hydrogen (H 2 ) is a promising fuel for reducing emissions in heavy-duty internal combustion engines (ICEs), but its low quenching distance increases the risk of flame propagation into narrow crevice regions, such as piston-liner gaps. This work uses detailed CFD simulations with finite-rate chemistry to investigate premixed H 2 –air flame quenching in a two-dimensional (2D) region consistent with the piston-liner gap of a diesel ICE. Model accuracy was assessed by comparison with experimentally measured quenching distances in an annular stepwise diverging tube (ASDT). A parametric study was conducted to assess the influence of crevice width (0.05–1.18 mm), pressure (50–150 bar), unburned gas temperature (431–573 K), and equivalence ratio ( Φ= 0.3–0.6). Results show that the critical Péclet number for flame survival is no greater than 3.25, consistent with prior literature, even under ultra-lean and high-pressure conditions (Φ ≤ 0.3, > 50 bar). Additionally, flames with Péclet numbers exceeding 6.15 exhibited front wrinkling, suggesting the onset of velocity-driven instabilities and enhanced flame robustness. These findings help define thresholds for flame quenching in confined geometries and support the safe design of H 2 fueled ICEs.

08 HYDROGEN↗

Reproducing curvature effects due to differential diffusion in tabulated chemistry for premixed flames

Tabulated chemistry reduces the cost of modeling reacting flows by transporting fewer scalars. It also has the benefit of introducing fewer terms that must be closed for Reynolds-averaged Navier-Stokes and large eddy simulation modeling. In this study of premixed lean hydrogen–air flames, an extension to an existing tabulated chemistry model was developed by including differential diffusion and thermal diffusion of multiple species, using a mixture-averaged diffusion model. The transport equations for the tabulation variables (a progress variable and a mixture fraction-like variable) have been formulated, and curvature effects are intrinsic to the transport equations derived from first principles. The mathematical derivation is general, such that other fuel/air mixtures could be examined. The new tabulated chemistry model was then validated using a range of configurations, including flames with curvature, extinction, and hot spots. The model validation indicated excellent agreement with detailed chemistry simulations for lean premixed hydrogen–air mixtures. Conditional means of the progress variable source term were shown to agree well with detailed chemistry simulations of two-dimensional freely propagating flames and three-dimensional turbulent flames. Finally, progress variable source terms three times higher than one-dimensional flat flame results were identified and validated with detailed chemistry, and super-adiabatic hot spots were also predicted in the turbulent flame configuration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal diffusion, exhaust gas recirculation and blending effects on lean premixed hydrogen flames

Thermodiffusively-unstable lean premixed hydrogen flames are investigated using two-dimensional direct numerical simulation employing finite-rate chemical kinetics. Three databases are generated focussing on the inclusion of the Soret effect, the recirculation of exhaust gas, and blending with methane. A simple rescaling of a classic thermal diffusion model is presented and shown to mimic multicomponent diffusion with very low computational cost and little-to-no loss in accuracy. It is also shown that a previously developed model for mean local flame speeds in lean premixed hydrogen flames can still be used provided Soret effects are taken into account in one-dimensional calculations. The addition of exhaust gas to the unburned mixture is found to enhance thermodiffusive instability; the primary mechanism for this was shown to be the highly-efficient third-body nature of water, with the reduction of adiabatic flame temperature a second-order effect. Again, the existing mean local flame speed model proved sufficient. Finally, blending with methane was found to reduce the thermodiffusive response of the flame, more so than the existing model suggests, despite adjustment of the fuel Lewis number; an adapted model is presented to account for this.

08 HYDROGEN↗

Towards the distributed burning regime in turbulent premixed flames

Three-dimensional numerical simulations of canonical statistically steady, statistically planar turbulent flames have been used in an attempt to produce distributed burning in lean methane and hydrogen flames. Dilatation across the flame means that extremely large Karlovitz numbers are required; even at the extreme levels of turbulence studied (up to a Karlovitz number of 8767) distributed burning was only achieved in the hydrogen case. In this case, turbulence was found to broaden the reaction zone visually by around an order of magnitude, and thermodiffusive effects (typically present for lean hydrogen flames) were not observed. In the preheat zone, the species compositions differ considerably from those of one-dimensional flames based a number of different transport models (mixture averaged, unity Lewis number and a turbulent eddy viscosity model). The behaviour is a characteristic of turbulence dominating non-unity Lewis number species transport, and the distinct limit is again attributed to dilatation and its effect on the turbulence. Peak local reaction rates are found to be lower in the distributed case than in the lower Karlovitz cases but higher than in the laminar flame, which is attributed to effects that arise from the modified fuel-temperature distribution that results from turbulent mixing dominating low Lewis number thermodiffusive effects. Finally, approaches to achieve distributed burning at realisable conditions are discussed; factors that increase the likelihood of realising distributed burning are higher pressure, lower equivalence ratio, higher Lewis number and lower reactant temperature.

42 ENGINEERING↗

Three-dimensional direct numerical simulation of a turbulent lifted hydrogen jet flame in heated coflow: a chemical explosive mode analysis

A chemical explosive mode analysis (CEMA) was developed as a new diagnostic to identify flame and ignition structure in complex flows. CEMA was then used to analyse the near-field structure of the stabilization region of a turbulent lifted hydrogen–air slot jet flame in a heated air coflow computed with three-dimensional direct numerical simulation. The simulation was performed with a detailed hydrogen–air mechanism and mixture-averaged transport properties at a jet Reynolds number of 11000 with over 900 million grid points. Explosive chemical modes and their characteristic time scales, as well as the species involved, were identified from the Jacobian matrix of the chemical source terms for species and temperature. An explosion index was defined for explosive modes, indicating the contribution of species and temperature in the explosion process. Radical and thermal runaway can consequently be distinguished. CEMA of the lifted flame shows the existence of two premixed flame fronts, which are difficult to detect with conventional methods. The upstream fork preceding the two flame fronts thereby identifies the stabilization point. A Damköhler number was defined based on the time scale of the chemical explosive mode and the local instantaneous scalar dissipation rate to highlight the role of auto-ignition in affecting the stabilization points in the lifted jet flame.

Mechanics↗